Commit Graph

8 Commits

Author SHA1 Message Date
Damien George
afd1ce0c15 stm32/powerctrl: Disable IRQs during stop mode to allow reconfig on wake 2018-11-28 12:44:54 +11:00
Damien George
66ca8e9b2c stm32/powerctrl: Move (deep)sleep funcs from modmachine.c to powerctrl.c 2018-11-28 12:22:20 +11:00
Damien George
6ea6c7cc9e stm32/powerctrl: Don't configure clocks if already at desired frequency.
Configuring clocks is a critical operation and is best to avoid when
possible.  If the clocks really need to be reset to the same values then
one can pass in a slightly higher value, eg 168000001 Hz to get 168MHz.
2018-09-24 17:34:05 +10:00
Damien George
bc54c57590 stm32/powerctrl: Optimise passing of default values to set_sysclk. 2018-09-24 17:34:05 +10:00
Damien George
dae1635c71 stm32/powerctrl: Factor code that configures PLLSAI on F7 MCUs. 2018-09-24 17:34:05 +10:00
Damien George
90ea2c63a5 stm32/powerctrl: Factor code to set RCC PLL and use it in startup.
This ensures that on first boot the most optimal settings are used for the
voltage scaling and flash latency (for F7 MCUs).

This commit also provides more fine-grained control for the flash latency
settings.
2018-09-24 17:34:05 +10:00
Damien George
9e4812771b stm32/powerctrl: Fix configuring APB1/APB2 frequency when AHB also set.
APB1/APB2 are derived from AHB, so if the user sets AHB!=SYSCLK then the
APB1/APB2 dividers must be computed from the new AHB.
2018-09-24 14:51:17 +10:00
Damien George
dff14c740b stm32/powerctrl: Move function to set SYSCLK into new powerctrl file.
Power and clock control is low-level functionality and it makes sense to
have it in a dedicated file, at least so it can be reused by other parts of
the code.
2018-09-24 14:18:18 +10:00