Commit Graph

261 Commits

Author SHA1 Message Date
Matt Trentini
bdbc44474f rp2/boards/WEACTSTUDIO: Add WEACTSTUDIO with multiple variants.
This supports 2, 4, 8 and 16MB flash variants.
2022-09-26 12:40:14 +10:00
Matt Trentini
0bc1d10557 rp2/Makefile: Add support for BOARD_VARIANTS.
Following stm32.  This allows a single board definition to define variants
of its configuration.
2022-09-26 12:38:58 +10:00
Jim Mussared
94beeabd2e py/obj: Convert make_new into a mp_obj_type_t slot.
Instead of being an explicit field, it's now a slot like all the other
methods.

This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:15 +10:00
Jim Mussared
6da41b5900 py/obj: Merge getiter and iternext mp_obj_type_t slots.
The goal here is to remove a slot (making way to turn make_new into a slot)
as well as reduce code size by the ~40 references to mp_identity_getiter
and mp_stream_unbuffered_iter.

This introduces two new type flags:
- MP_TYPE_FLAG_ITER_IS_ITERNEXT: This means that the "iter" slot in the
  type is "iternext", and should use the identity getiter.
- MP_TYPE_FLAG_ITER_IS_CUSTOM: This means that the "iter" slot is a pointer
  to a mp_getiter_iternext_custom_t instance, which then defines both
  getiter and iternext.

And a third flag that is the OR of both, MP_TYPE_FLAG_ITER_IS_STREAM: This
means that the type should use the identity getiter, and
mp_stream_unbuffered_iter as iternext.

Finally, MP_TYPE_FLAG_ITER_IS_GETITER is defined as a no-op flag to give
the default case where "iter" is "getiter".

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:13 +10:00
Jim Mussared
a52cd5b07d py/obj: Add accessors for type slots and use everywhere.
This is a no-op, but sets the stage for changing the mp_obj_type_t
representation.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:07 +10:00
Jim Mussared
9dce82776d all: Remove unnecessary locals_dict cast.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared
662b9761b3 all: Make all mp_obj_type_t defs use MP_DEFINE_CONST_OBJ_TYPE.
In preparation for upcoming rework of mp_obj_type_t layout.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared
ca51d63c37 rp2/Makefile: Add link to build troubleshooting on failure.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-15 12:22:18 +10:00
Jim Mussared
dec0ff7a10 rp2/boards: Remove all I2C,SPI pin defs that already match pico-sdk.
I.e. for whichever SPI/I2C instance is PICO_DEFAULT_I2C, there's no need to
set MICROPY_HW_SPIn_SCK.

The only ones remaining are for the non-default instance.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:51:15 +10:00
Jim Mussared
315e74236f rp2/machine_i2c: Use pico-sdk's default pins for I2C.
Inherits the default values for whichever instance is PICO_DEFAULT_I2C.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:51:11 +10:00
Jim Mussared
29437205f2 rp2/machine_spi: Use pico-sdk's default pins for SPI.
Rather than hardcoding the defaults, use pico-sdk's board definition.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:51:04 +10:00
Jim Mussared
c364301817 rp2/boards: Set PICO_BOARD correctly for each board.
In most cases, it's calculated automatically from the board name, and so
doesn't need to be set at all.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:50:54 +10:00
Phil Howard
6aa3c94634 rp2/rp2_flash: Add start/len support to rp2.Flash() constructor.
This allows support for partitioned flash on rp2 boards.

See issue #9208.

Signed-off-by: Phil Howard <phil@gadgetoid.com>
2022-09-08 14:37:41 +10:00
Jim Mussared
d84c6ef0e8 ports: Use micropython-lib version of drivers in manifests. 2022-09-08 11:27:05 +10:00
Jim Mussared
203dae41fb all: Update all manifest.py files to use new features.
Changes in this commit:
- Manifest include's now use the directory path where possible (no longer
  necessary to include the manifest.py file explicitly).
- Add manifest.py for all drivers and components that are referenced by
  port/board manifests.
- Replace all uses of freeze() with package()/module(), except for port and
  board modules.
- Use opt=3 everywhere, for consistency and to reduce code size.
- Use require() instead of include() for all micropython-lib references.
- Remove support for optional board-level manifest.py in mimxrt port, to
  make it behave the same as other ports (the board must set
  FROZEN_MANIFEST to a custom manifest.py, which can optionally include the
  default, port-level manifest).
- Also reinstates modules that were accidentally removed from the esp8266
  512k build in fbe9417b90.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2022-09-05 18:43:18 +10:00
Jim Mussared
da7f2537a1 top: Use micropython-lib unconditionally in manifests.
micropython-lib is now a submodule, and the manifest compilation process
will ensure it is available, so manifests no longer need to check that it
is available.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-05 17:00:43 +10:00
hoihu
85a25895ff rp2/mbedtls: Fix missing time.h include. 2022-08-31 00:22:34 +10:00
robert-hh
2488311dc2 rp2/machine_uart: Implement uart.flush() and uart.txdone().
uart.flush()

flush() will wait until all characters have been sent. It may return
while the last character is sent. if needed, the calling code has to
add one character wait time. To avoid a permanent lock, a timeout
applies depending on the size of txbuf and the baud rate.

ret = uart.txdone()

ret is True if no transfer is in progress. It may return True if the
last byte of a transfer is sent.
ret is False otherwise.
2022-08-31 00:17:54 +10:00
Jim Mussared
8a0ee5a5c0 py/objstr: Split mp_obj_str_from_vstr into bytes/str versions.
Previously the desired output type was specified.  Now make the type part
of the function name.  Because this function is used in a few places this
saves code size due to smaller call-site.

This makes `mp_obj_new_str_type_from_vstr` a private function of objstr.c
(which is almost the only place where the output type isn't a compile-time
constant).

This saves ~140 bytes on PYBV11.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 16:43:55 +10:00
robert-hh
47c45d0e7f rp2/machine_wdt: Check for the maximum timeout value of watchdog.
The value will be checked for timeout <= 8388.  Notes were added to the
documentation.
2022-08-23 16:26:29 +10:00
Jacob Siverskog
0546a12238 rp2: Correctly determine path to arm-none-eabi-size.
Figure out path to arm-none-eabi-size the same way it's done for the
other binaries, instead of assuming it to be in the user's $PATH.

Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
2022-08-11 14:23:28 +10:00
Phil Howard
71f6eb5ac9 rp2: Mark gc_heap NOLOAD for faster boot.
Create a new linker section .unitialized_bss for bss that does not need
zero-initialising.

Move gc_heap to this section, which saves ~30ms from rising edge of RESET
to setting a pin HIGH in MicroPython.

Zero fill happens in Pico SDK crt0.S before ROSC is configured.  It's very,
very slow.

Signed-off-by: Phil Howard <phil@gadgetoid.com>
2022-08-11 14:16:29 +10:00
omogenot
6e51dbd95a rp2/boards/W5500_EVB_PICO: Add new board definition for W5500_EVB_PICO.
Signed-off-by: github@mymeterinfo.info
2022-08-11 14:12:55 +10:00
Damien George
f72d3cec23 rp2/machine_spi: Add mp_hal_get_spi_obj helper function.
And remove the now-obsolete spi_from_mp_obj() function.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-10 14:05:02 +10:00
Ian Davies
fbe9417b90 extmod/ntptime: Factor out ntptime module from esp8266 port.
The ntptime module was previously only included in the ESP8266 port.  This
commit factors that module out into the extmod directory, makes it support
different epochs, and includes it in the rp2 port.
2022-08-06 00:08:32 +10:00
Ian Davies
b560b9fe71 rp2/mbedtls: Enable certificate validity time validation. 2022-08-06 00:08:01 +10:00
Jim Mussared
9a7ac41be6 rp2/Makefile: Always use cmake to discover submodules.
Used to be special-cased for Pico, but now everything depends on
micropython-lib if it's using a frozen manifest.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-03 00:05:54 +10:00
Peter Harper
45ab801c30 rp2/cyw43_configport: Add event hook into cyw43_delay_ms.
Still see some USB issues apparently caused by delays loading wifi
firmware.  cyw43_delay_ms is used to wait in the driver, so we should call
the event hook in there.

Fixes #8963.
2022-07-27 13:42:21 +10:00
Jim Mussared
092784da19 ports: Remove unused mp_type_{fileio/textio} macros in mpconfigport.h.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-26 18:07:22 +10:00
robert-hh
0c45a28d24 rp2/rp2_pio: Fix StateMachine.restart when PIO program is shared.
The state machines were not properly restarted in the case that the same
PIO program was shared among multiple StateMachine instances.  This is
because only the first StateMachine to use the program would set the
rp2_state_machine_initial_pc variable.

See https://forum.micropython.org/viewtopic.php?f=21&t=12776&p=69464#p69464
2022-07-26 02:00:01 +10:00
Damien George
f64862a766 rp2/cyw43_configport: Set CYW43_WIFI_NVRAM_INCLUDE_FILE value.
Required for latest cyw43-driver.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-26 01:39:30 +10:00
Peter Harper
33d6994d4c rp2/cyw43_configport: Set CYW43_EVENT_POLL_HOOK value.
This should allow USB to work while we're loading WiFi firmware.

Fixes issue #8904.
2022-07-26 01:39:08 +10:00
Jim Mussared
a053827084 extmod/network_ninaw10: Move ninaw10 root pointer registrations here.
Originally in drivers/ninaw10/nina_wifi_bsp.c but that isn't a QSTR source.

Also remove outdated commment about root pointers in mpconfigport.h.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-21 16:21:50 +10:00
Jim Mussared
8b4298a4bf rp2/mpbthciport: Remove mp_bthci_uart from set of root pointers.
This is a statically-allocated UART (see machine_uart.c), and doesn't
contain any heap pointers other than the ringbufs (which are already root
pointers), so no need to track it additionally.

Saves needing to add mpbthciport.c to the QSTR sources.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-21 16:19:42 +10:00
robert-hh
80339f1a33 ports: Adapt mimxrt, nrf and rp2 ports to work with latest TinyUSB.
rp2: change tud_task() to tud_task_ext().

mimxrt: use lib/tinyusb/src/portable/chipidea/ci_hs/dcd_ci_hs.c instead of
lib/tinyusb/src/portable/nxp/transdimension/dcd_transdimension.c.

nrf: add a definition for the changed tud_task().  tud_task() is changed
to tud_task_ext(), and the #define for backward compatibility is in
src/device/usbd.h.

The items I know which are fixed with this version:
- Fix for the SAMD USB lock-up.
- Support the MIMXRT11XX series of MCUs.
- Fix a wrong pin definition for MIMXRT1050_EVKB.

Tested with the MIMXRT boards, rp2 Pico, SAMD boards, nrf board.
2022-07-19 11:27:21 +10:00
Damien George
b89422ceaa extmod: Always use custom mbedtls error message code.
All ports that use mbedtls use the custom error messages in
mp_mbedtls_errors.c.  This commit simplifies the build so that ports don't
need to explicitly add this file, it's now used by default when mbedtls is
enabled.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-18 22:55:22 +10:00
David Lechner
7e4b205cb0 py/mpstate: Drop MICROPY_PORT_ROOT_POINTERS from mp_state_vm_t.
All in-tree uses of MICROPY_PORT_ROOT_POINTERS have been replaced with
MP_REGISTER_ROOT_POINTER(), so now we can remove both
MICROPY_PORT_ROOT_POINTERS and MICROPY_BOARD_ROOT_POINTERS from the code
and remaining config files.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:51:16 +10:00
David Lechner
ffa22b8f97 rp2: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers in the rp2 port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner
a3703584fe extmod/modnetwork: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register mod_network_nic_list and
removes the same from all mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:25 +10:00
David Lechner
e531b72b56 extmod/nimble: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register bluetooth_nimble_memory
and bluetooth_nimble_root_pointers and removes the same from all
mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:14 +10:00
David Lechner
ac86e8449a drivers/ninaw10/nina_wifi_bsp: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register mp_wifi_spi, mp_wifi_timer
and mp_wifi_sockpoll_list and removes the same from all mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:49:28 +10:00
David Lechner
81dbea1ce3 shared/readline: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register the readline_history root
pointer array used by shared/readline.c and removes the registration from
all mpconfigport.h files.

This also required adding a new MICROPY_READLINE_HISTORY_SIZE config option
since not all ports used the same sized array.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:49 +10:00
Jim Mussared
74794d42b8 rp2/CMakeLists: Use armv6m mpy-cross arch for rp2.
Commit 0e28a1f0e5 made it possible to set
-march=armv6m.  It needs to be used when freezing for rp2.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 23:50:19 +10:00
Peter Harper
9f0f7e34c7 rp2/mphalport: Fix missing storage_read_blocks symbol in debug build.
When building `make BOARD=PICO_W DEBUG=1` the cyw43-driver requires
storage_read_blocks().

Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>
2022-07-12 16:56:38 +10:00
Jim Mussared
c5563aa024 rp2/mpconfigport: Make networking options consistent across boards.
Enable the same set of networking features on boards with wifi/ethernet.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 16:28:44 +10:00
Jim Mussared
662dc8602b rp2: Make atomic sections suspend the other core (if active).
When a flash write/erase is in progress, we need to ensure that the
other core cannot be using XIP.

This also implements MICROPY_BEGIN_ATOMIC_SECTION as a full mutex, which
is necessary as it's used to syncronise access to things like the scheduler
queue.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 16:20:21 +10:00
Jim Mussared
daff597753 rp2: Run USB stack task exclusively from core 0.
The goal is to avoid a situation where core 1 is shut down while holding
the tinyusb spinlock, which could happen during soft reset if
mp_thread_deinit is called while core1 is running tud_task().

This also fixes a latent race where the two cores are competing to
decrement and compare `vm_hook_divisor` with no mem fence or atomic
protection -- only core0 will now do this.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 16:17:19 +10:00
Jim Mussared
2efaebc899 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Add urequests module.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-05 23:03:02 +10:00
Jim Mussared
11ef618bbc rp2/CMakeLists: Don't override cyw43-driver unless necessary.
This supresses a warning from pico-sdk when the board isn't using this
driver.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-05 23:00:43 +10:00
Jim Mussared
5f4143dd40 rp2/CMakeLists: Give error if required submodules are missing.
Ensure that nimble and cyw43-driver are initialised when the board requires
it.  Also make these work with `make submodules`.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-05 23:00:36 +10:00
Jim Mussared
651b370484 rp2/Makefile: Regenerate cmake if generated Makefile missing.
`CMakeCache.txt` can exist even if cmake failed. Use `Makefile` instead.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-05 22:47:06 +10:00
Damien George
85be3d3da8 rp2/mpconfigport: Factor core event handling to EVENT_POLL_HOOK_FAST.
Signed-off-by: Damien George <damien@micropython.org>
2022-07-05 16:11:42 +10:00
Damien George
4b9a2abbde rp2/main: Set default AP auth mode to WPA2_AES_PSK.
Signed-off-by: Damien George <damien@micropython.org>
2022-07-05 11:07:16 +10:00
Damien George
3d76292f37 rp2/boards/GARATRONIC_PYBSTICK26_RP2040: Change pico-sdk board name.
This follows a similar renaming in pico-sdk.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-05 09:45:44 +10:00
Damien George
99c2589778 rp2/boards/PICO_W: Add new Pico W board, an RP2040 with WiFi.
Work done in collaboration with Graham Sanderson and Peter Harper.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 17:03:51 +10:00
Damien George
50e46552c0 rp2: Integrate CYW43xx WiFi driver.
This includes:
- Configuration file for the cyw43-driver.
- Integration of cyw43-driver into the build, using lwIP.
- Enhancements to machine.Pin to support extension IO pins provided by the
  CYW43xx.
- More mp-hal pin helper functions.
- mp_hal_get_mac_ascii MAC address helper function.
- Addition of rp2.country() function to set the country code.

A board can enable this driver by setting MICROPY_PY_NETWORK_CYW43 in their
cmake snippet.

Work done in collaboration with Graham Sanderson and Peter Harper.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 17:03:51 +10:00
Damien George
c001cfa603 rp2/mpnetworkport: Convert network task scheduling to use PendSV IRQ.
It is more reliable and scales better when more components need it.

Work done in collaboration with Graham Sanderson and Peter Harper.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 17:03:47 +10:00
Damien George
7cdad05e54 rp2/rp2_flash: Add asserts for size of flash filesystem partition.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 16:03:21 +10:00
Damien George
c95f99105a rp2/lwip_inc: Enable lwIP status callback.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 16:03:21 +10:00
Damien George
11f920f8ad rp2/mbedtls: Enable some more mbedtls options.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 16:03:21 +10:00
Jim Mussared
797a83ac3e rp2/mpthreadport: Ensure core1 doesn't hold gc lock in deinit.
Prior to this commit the following code would lock up the device when
Ctrl-D is entered at the REPL:

    import gc, _thread

    def collect_thread():
        while True:
            gc.collect()

    _thread.start_new_thread(collect_thread, [])

Fixes part of #8494.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-06-30 11:53:25 +10:00
Damien George
b004e7e397 rp2/modmachine: Implement lightsleep() with optional sleep period.
This gets basic machine.lightsleep([n]) behaviour working on the rp2 port.
It supports:

- Calling lightsleep without a specified period, in which case it uses xosc
  dormant mode.  There's currently no way to wake it up from this state,
  unless you write to raw registers to enable a GPIO wake up source.

- Calling lightsleep with a period n in milliseconds.  This period must be
  less than about 72 minutes and uses timer alarm3 to wake it up.

The RTC continues to run during lightsleep, but other peripherals have
their clock turned off during the sleep.

It doesn't yet support longer periods than 72 minutes, or waking up from
GPIO IRQ.

Measured current consumption from the USB port on a PICO board is about
1.5mA when doing machine.lightsleep(5000), and about 0.9mA when doing
machine.lightsleep().

Addresses issue #8770.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 11:40:17 +10:00
iabdalkader
de823e7741 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Enable Arduino 1200bps touch. 2022-06-23 14:32:56 +10:00
Damien George
f5769698e5 extmod/modlwip: Clean up inclusion of modlwip in build process.
The following changes are made:

- Guard entire file with MICROPY_PY_LWIP, so it can be included in the
  build while still being disabled (for consistency with other extmod
  modules).

- Add modlwip.c to list of all extmod source in py/py.mk and
  extmod/extmod.cmake so all ports can easily use it.

- Move generic modlwip GIT_SUBMODULES build configuration code from
  ports/rp2/CMakeLists.txt to extmod/extmod.cmake, so it can be reused by
  other ports.

- Remove now unnecessary inclusion of modlwip.c in EXTMOD_SRC_C in esp8266
  port, and in SRC_QSTR in mimxrt port.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 23:37:38 +10:00
iabdalkader
f522aabab2 rp2/modmachine: Allow boards to provide custom bootloader code.
And expose the machine_bootloader() C function so it can be used elsewhere.
2022-06-17 13:38:21 +10:00
Andrew Scheller
cedb93c179 docs: Update Raspberry Pi URLs from .org to .com. 2022-06-14 11:41:13 +10:00
Damien George
bd375df02c extmod/extmod.cmake: Require components to be explicitly enabled.
Otherwise include directories are added unconditionally to the build
variables if the component (submodule) is checked out.  This can lead to,
eg, the esp32 build using lib/lwip header files, instead of lwip header
files from the IDF.

Fixes issue #8727.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-08 13:03:34 +10:00
Damien George
9670a156da all: Rename MICROPY_PY_WIZNET5K to MICROPY_PY_NETWORK_WIZNET5K.
To match MICROPY_PY_NETWORK_CYW43 and MICROPY_PY_NETWORK_NINAW10.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
Damien George
66dfe17b18 rp2/CMakeLists: Simplify qstr sources when enabling extmod components.
Also remove redundant modusocket.c and modnetwork.c sources, they are
already added by extmod/extmod.cmake.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
Damien George
a446a7bdef rp2/mpnetworkport: Fix lwip alarm callback timing to use microseconds.
The callback passed to add_alarm_in_ms must return microseconds, even
though the initial delay is in milliseconds.  Fix this use, and to avoid
further confusion use the add_alarm_in_us function instead.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
iabdalkader
2111ca0b8f rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Update USB PID.
This PID is allocated for the Arduino Nano RP2040 running MicroPython.
2022-06-03 16:12:44 +10:00
Andrew Leech
ffe5f2efe2 rp2/Makefile: Build in debug mode with "make DEBUG=1".
Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:34:29 +10:00
Andrew Leech
1b80aa9ce3 rp2/boards/W5100S_EVB_PICO: Add Wiznet W5100S-EVB-Pico board.
Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:34:29 +10:00
Andrew Leech
bca816f5ac rp2: Add support for using Wiznet hardware as an Ethernet NIC.
Uses the extmod/network_wiznet5k driver to provide network connectivity.

Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:34:29 +10:00
Andrew Leech
15fea3a1ff rp2: Integrate lwIP network stack.
Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:34:18 +10:00
Andrew Leech
7d9cc69645 rp2/Makefile: Use cmake for "make submodules" task when needed.
Because the submodule list can be updated by cmake files.

Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:29:11 +10:00
Andrew Leech
05f927b624 rp2/machine_pin: Add mp_hal_pin_interrupt C interface.
So C can can easily configure a pin interrupt and callback.

Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:29:11 +10:00
Andrew Leech
9bd6169b72 rp2/mbedtls: Add support for ssl module with MICROPY_SSL_MBEDTLS.
Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:29:06 +10:00
Damien George
efe23aca71 all: Remove third argument to MP_REGISTER_MODULE.
It's no longer needed because this macro is now processed after
preprocessing the source code via cpp (in the qstr extraction stage), which
means unused MP_REGISTER_MODULE's are filtered out by the preprocessor.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 16:31:37 +10:00
Damien George
cca08922d9 py/emitinlinethumb: Make ARMv7-M instruction use dynamically selectable.
This follows on from a5324a1074 and allows
mpy-cross to dynamically select whether ARMv7-M instructions are supported
in @micropython.asm_thumb functions.

The config option MICROPY_EMIT_INLINE_THUMB_ARMV7M is no longer needed, it
is now controlled by MICROPY_EMIT_THUMB_ARMV7M.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-26 11:54:48 +10:00
iabdalkader
0bdfceacbe extmod/network_ninaw10: Add support for socket events callback. 2022-05-26 11:15:07 +10:00
iabdalkader
875caca504 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Enable webrepl. 2022-05-25 16:05:50 +02:00
iabdalkader
a22d0bda52 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Disable internal errno.
* Internal errno can't be used with Nina module due to an issue
with esp-idf config.
2022-05-25 16:05:50 +02:00
iabdalkader
4bcffbd1c6 rp2/mpconfigport.h: Allow boards to override internal errno config. 2022-05-25 16:05:50 +02:00
iabdalkader
d037e75991 rp2/mpconfigport.h: Enable static scheduler nodes. 2022-05-25 16:05:50 +02:00
Damien George
6e71cde6aa ports: Use default VFS config for import_stat and builtin_open.
For ports with MICROPY_VFS and MICROPY_PY_IO enabled their configuration
can now be simplified to use the defaults for mp_import_stat and
mp_builtin_open.

This commit makes no functional change, except for the following minor
points:
- the built-in "open" is removed from the minimal port (it previously did
  nothing)
- the duplicate built-in "input" is removed from the esp32 port
- qemu-arm now delegates to VFS import/open

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Jim Mussared
62f00a43d5 rp2: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared
bb794f05b7 extmod: Make port-included extmod modules use MP_REGISTER_MODULES.
_onewire, socket, and network were previously added by the port rather
than objmodule.c.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Jim Mussared
4eab44a1ec extmod: Make extmod modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Jim Mussared
0e7bfc88c6 all: Use mp_obj_malloc everywhere it's applicable.
This replaces occurences of

    foo_t *foo = m_new_obj(foo_t);
    foo->base.type = &foo_type;

with

    foo_t *foo = mp_obj_malloc(foo_t, &foo_type);

Excludes any places where base is a sub-field or when new0/memset is used.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-03 22:28:14 +10:00
Damien George
0e6873840b rp2/mpconfigport: Enable execfile, NotImplemented and REPL EMACS keys.
To bring this port in line with other ports that use
MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-26 22:15:07 +10:00
Damien George
5c32111fa0 ports: Reformat more C and Python source code.
These files that are reformatted only now fall under the list of files to
apply uncrustify/black formatting to.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-20 16:17:35 +10:00
Peter Hinch
d242a9b7f7 rp2/machine_uart: Use read/write mutex to prevent char duplication.
Duplication of characters is caused by re-entrant calls from separate cores
of uart_fill_tx_fifo().  This patch uses a mutex to ensure that a
re-entrant execution of the function returns without affecting the UART
FIFO.

Fixes issues #8344 and #8360.
2022-04-12 11:39:00 +10:00
Damien George
b59989f40e rp2/Makefile: Add mbedtls to GIT_SUBMODULES list and use it in CI func.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-11 13:05:25 +10:00
Martin Fischer
5873390226 rp2/mphalport: Fix USB CDC RX handling to not block when unprocessed.
Prior to this commit, the USB CDC OUT endpoint got NACK'd if a character
was received but not consumed by the application, e.g. via
sys.stdin.read().  This meant that USB CDC was blocked and no additional
characters could be sent from the host.  In particular a ctrl-C could not
interrupt the application if another character was pending.

To fix the issue, the approach in this commit uses a callback tud_cdc_rx_cb
which is called by the TinyUSB stack on reception of new CDC data.  By
consuming the data immediately, the endpoint does not stall anymore.  The
previous handler tud_cdc_rx_wanted_cb was made obsolete and removed.

In addition some cleanup was done along the way: by adding interrupt_char.c
and removing the existing code mp_hal_set_interrupt_char().  Also, there is
now only one (stdin) ringbuffer.

Fixes issue #7996.
2022-04-05 10:47:19 +10:00
Damien George
86e6744ff5 rp2: Enable ucryptolib, using mbedtls for backend functions.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-04 23:15:01 +10:00
iabdalkader
df86cef59a rp2: Allow Overriding cmake frozen manifest from the command line.
If MICROPY_FROZEN_MANIFEST is set from the cmake command line, then it will
override the default and any manifest set by the board.
2022-03-24 22:10:01 +11:00
iabdalkader
fe8b47e29f ports: Allow boards to define additional network interfaces. 2022-03-24 17:23:28 +11:00
Damien George
818be10bb5 zephyr/moduos: Convert module to use extmod version.
This also adds uos.unlink(), for all ports that use extmod/moduos.c.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George
926b554daf extmod/moduos: Create general uos module to be used by all ports.
Based on the rp2 port version, with the rp2 port converted to use this
module.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00