Commit Graph

236 Commits

Author SHA1 Message Date
Damien George
ad4656b861 all: Rename BYTES_PER_WORD to MP_BYTES_PER_OBJ_WORD.
The "word" referred to by BYTES_PER_WORD is actually the size of mp_obj_t
which is not always the same as the size of a pointer on the target
architecture.  So rename this config value to better reflect what it
measures, and also prefix it with MP_.

For uses of BYTES_PER_WORD in setting the stack limit this has been
changed to sizeof(void *), because the stack usually grows with
machine-word sized values (eg an nlr_buf_t has many machine words in it).

Signed-off-by: Damien George <damien@micropython.org>
2021-02-04 22:46:42 +11:00
Damien George
7c44354592 ports: Remove def of MP_PLAT_PRINT_STRN if it's the same as the default.
To simplify config, there's no need to specify MP_PLAT_PRINT_STRN if it's
the same as the default definition in py/mpconfig.h.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-04 22:39:17 +11:00
Chris Hemingway
993ab6aa2c nrf/README: Add use of "make submodules" in alternative build paragraph.
Add "make submodules" to commands when building for the first time.
Otherwise, on a first time build, the submodules have not been checked out
and a lot of `fatal error: nrfx.h: No such file or directory` errors are
printed.
2021-01-30 14:32:55 +11:00
Glenn Ruben Bakke
d0b8554df4 nrf: Change selected boards to utilize pre-flashed bootloader.
The nrf52840-mdk-usb-dongle and pca10050 comes with a pre-flashed
bootloader (OpenBootloader).

This commit updates the boards "mpconfigboard.mk" to use DFU as
default flashing method and set the corresponding BOOTLOADER
settings such that nrf52840_open_bootloader_1.2.x.ld linker
script is used.

The default DFU flashing method can be disabled by issuing "DFU=0"
when invoking make. This will lead to "segger" being used as default
flashing tool. When using "DFU=0", the linker scripts will not
compensate for any MBR and Bootloader region being present, and might
overwrite them if they were present.

The commit also removes the custom linker script specific to
nrf52840-mdk-usb-dongle as it now points to a generic.

Updated nrf52840-mdk-usb-dongle's README.md to be more clear on
how to deploy the built firmware.

The port README.md has also been updated. In the list of target
boards a new column has been added to indicate which bootloader
is present on the target board. And for consistency, changed all
examples in the README.md to use "deploy" instead of "flash".
2020-12-07 20:04:50 +01:00
Glenn Ruben Bakke
7f405236a3 nrf/boards: Add linker script for nrf52840 Open Bootloader 1.2.0. 2020-12-07 20:04:50 +01:00
Glenn Ruben Bakke
634f6df324 nrf/Makefile: Add support for flashing with nrfutil.
An additional Makefile parameter NRFUTIL_PORT can be set in order
to define the serial port to used for the DFU (Default: /dev/ttyACM0).

The "nrfutil" that is used as flasher towards OpenBootloader is
available for installation through Python "pip".

In case of SD=s140, SoftDevice ID 0xB6 is passed to nrfutil's package
generation which corresponds to SoftDevice s140 v6.1.1.
2020-12-07 20:04:50 +01:00
Glenn Ruben Bakke
718397a37d nrf/Makefile: Add bootloader specific section.
Add the option for "mpconfigboard.mk" to define whether the
board hosts a bootloader or not. The BOOTLOADER make variable
must be set to the name of the bootloader.

When the BOOTLOADER name is set it is also required to supply
the BOOTLOADER_VERSION_MAJOR and the BOOTLOADER_VERSION_MINOR
from the "mpconfigboards.mk". These will be used to resolve which
bootloader linker script that should be passed to the linker.

The BOOTLOADER section also supplies the C-compiler with
BOOTLOADER_<bootloader name>=<version major><version minor>
as a compiler define. This is for future use in case a bootloader
needs to do modification to the startup files or similar (like
setting the VTOR specific to a version of a bootloader).
2020-12-07 20:04:50 +01:00
Glenn Ruben Bakke
2489688635 nrf/boards: Update memory.ld to include bootloader offsets.
Adding variables that can be set from other linker scripts:

- _bootloader_head_size:
    Bootloader flash offset in front of the application.

- _bootloader_tail_size:
    Bootloader offset from the tail of the flash.
    In case the bootloader is located at the end.

- _bootloader_head_ram_size:
    Bootloader RAM usage in front of the application.

Updated calculations of application flash and RAM.
2020-12-07 20:04:50 +01:00
Damien George
64180f0742 extmod/machine_i2c: Add init protocol method for generic I2C bindings.
Hardware I2C implementations must provide a .init() protocol method if they
want to support reconfiguration.  Otherwise the default is that i2c.init()
raises an OSError (currently the case for all ports).

mp_machine_soft_i2c_locals_dict is renamed to mp_machine_i2c_locals_dict to
match the generic SPI bindings.

Fixes issue #6623 (where calling .init() on a HW I2C would crash).

Signed-off-by: Damien George <damien@micropython.org>
2020-11-23 19:45:04 +11:00
JPFrancoia
3dcb551d89 nrf/README: Describe Pin numbering scheme for nRF52840.
Clarify that the nRF52840's GPIO 1.00 to 1.15 maps to Pin(32-47) in
MicroPython.
2020-11-22 21:01:49 +01:00
Damien George
18518e26a7 ports: Use correct in/out endpoint size in TUD_CDC_DESCRIPTOR.
The last argument of TUD_CDC_DESCRIPTOR() is the endpoint size (or
wMaxPacketSize), not the CDC RX buffer size (which can be larger than the
endpoint size).

Signed-off-by: Damien George <damien@micropython.org>
2020-10-17 15:49:16 +11:00
Damien George
71f3ade770 ports: Support legacy soft I2C/SPI construction via id=-1 arg.
With a warning that this way of constructing software I2C/SPI is
deprecated.  The check and warning will be removed in a future release.

This should help existing code to migrate to the new SoftI2C/SoftSPI types.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
39d50d129c ports: Add SoftI2C and SoftSPI to machine module where appropriate.
Previous commits removed the ability for one I2C/SPI constructor to
construct both software- or hardware-based peripheral instances.  Such
construction is now split to explicit soft and non-soft types.

This commit makes both types available in all ports that previously could
create both software and hardware peripherals: machine.I2C and machine.SPI
construct hardware instances, while machine.SoftI2C and machine.SoftSPI
create software instances.

This is a breaking change for use of software-based I2C and SPI.  Code that
constructed I2C/SPI peripherals in the following way will need to be
changed:

    machine.I2C(-1, ...)            ->  machine.SoftI2C(...)
    machine.I2C(scl=scl, sda=sda)   ->  machine.SoftI2C(scl=scl, sda=sda)

    machine.SPI(-1, ...)            ->  machine.SoftSPI(...)
    machine.SPI(sck=sck, mosi=mosi, miso=miso)
                        ->  machine.SoftSPI(sck=sck, mosi=mosi, miso=miso)

Code which uses machine.I2C and machine.SPI classes to access hardware
peripherals does not need to change.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
aaed33896b extmod/machine_i2c: Remove "id" arg in SoftI2C constructor.
The SoftI2C constructor is now used soley to create SoftI2C instances, it
can no longer delegate to create a hardware-based I2C instance.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
c35deb2625 extmod/machine_i2c: Rename type to SoftI2C and add custom print method.
Also rename machine_i2c_type to mp_machine_soft_i2c_type.  These changes
make it clear that it's a soft-I2C implementation, and match SoftSPI.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
27e117307d nrf: Remove unnecessary includes of mpconfigport.h and its header guard.
The mpconfigport.h file is an internal header and should only ever be
included once by mpconfig.h.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-09 00:13:34 +10:00
Damien George
75344af4ca nrf/main: Make mp_builtin_open signature match that in py/builtin.h.
Signed-off-by: Damien George <damien@micropython.org>
2020-09-09 00:13:34 +10:00
Damien George
06659077a8 all: Update Python code to conform to latest black formatting.
Updating to Black v20.8b1 there are two changes that affect the code in
this repository:

- If there is a trailing comma in a list (eg [], () or function call) then
  that list is now written out with one line per element.  So remove such
  trailing commas where the list should stay on one line.

- Spaces at the start of """ doc strings are removed.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-29 15:18:01 +10:00
Roberto Colistete Jr
91c5d168c0 nrf/Makefile: Improve user C modules support.
Add CFLAGS_EXTRA to CFLAGS. Include LDFLAGS_MOD to the compilation.
And, add SRC_MOD to SRC_QSTR.
2020-08-26 22:14:40 +02:00
Glenn Ruben Bakke
caaaa2b1f4 nrf: Enable more features for all targets.
Enabling the following features for all targets, except for nrf51
targets compiled to be used with SoftDevice:

- MICROPY_PY_ARRAY_SLICE_ASSIGN
- MICROPY_PY_SYS_STDFILES
- MICROPY_PY_UBINASCII
2020-07-22 12:54:20 +02:00
Glenn Ruben Bakke
0a79e18398 nrf: Split mpconfigport.h into multiple files.
Splitting mpconfigport.h into multiple device specific
files in order to facilitate variations between devices.

Due to the fact that the devices might have variations in
features and also variations in flash size it makes sense
that some devices offers more functionality than others
without being limited by restricted devices.

For example more micropython features can be activated for
nrf52840 with 1MB flash, compared to nrf51 with 256KB.
2020-07-22 12:54:20 +02:00
Matt Trentini
486cb6dd4a nrf: Add board definition for nRF52840-MDK-USB-Dongle. 2020-07-16 23:47:13 +10:00
Glenn Ruben Bakke
95d0d1c486 nrf/boards: Enable RTCounter machine module for nrf9160 boards.
Resolves dependencies for MICROPY_PY_TIME_TICKS which
requires to link against nrfx_rtc.c functions by setting
MICROPY_PY_MACHINE_RTCOUNTER to 1.
2020-07-16 11:48:52 +02:00
Glenn Ruben Bakke
b776fe6969 nrf/nrfx_config: Disable RTC2 for nRF9160 targets.
nRF9160 does not have any RTC2. Disable the configuration in
case of NRF9160_XXAA.
2020-07-16 11:44:44 +02:00
Alex Tsamakos
f743bd3d25
nrf/boards: Add initial support for Actinius Icarus.
Example make command:

make BOARD=actinius_icarus
2020-07-10 03:48:30 +02:00
Martin Fischer
59ed3bdd9f nrf: Enable nrf tick support on all boards by default.
Having time.ticks_ms/us/add/diff is very useful and used by many drivers,
libraries and components.
2020-07-08 23:47:08 +10:00
Martin Fischer
15574cd665 nrf: Add support for time.ticks_xxx functions using RTC1.
This commit adds time.ticks_ms/us support using RTC1 as the timebase.  It
also adds the time.ticks_add/diff helper functions.  This feature can be
enabled using MICROPY_PY_TIME_TICKS.  If disabled the system uses the
legacy sleep methods and does not have any ticks functions.

In addition support for MICROPY_EVENT_POLL_HOOK was added to the
time.sleep_ms(x) function, making this function more power efficient and
allows support for select.poll/asyncio.  To support this, the RTC's CCR0
was used to schedule a ~1msec event to wakeup the CPU.

Some important notes about the RTC timebase:

- Since the granularity of RTC1's ticks are approx 30usec, time.ticks_us is
not perfect, does not have 1us resolution, but is otherwise quite usable.
For tighter measurments the ticker's 1MHz counter should be used.

- time.ticks_ms(x) should *not* be called in an IRQ with higher prio than
the RTC overflow irq (3).  If so it introduces a race condition and
possibly leads to wrong tick calculations.

See #6171 and #6202.
2020-07-08 23:47:02 +10:00
Glenn Ruben Bakke
c2317a3a8d nrf/Makefile: Disable ROM text compression when compiling for debug.
When compiling for debug (-O0) the .text segment cannot fit the flash
region when MICROPY_ROM_TEXT_COMPRESSION=1, because the compiler does not
optimise away the large if-else chain used to select the correct compressed
string.

This commit enforces MICROPY_ROM_TEXT_COMPRESSION=0 when compiling for
debug (DEBUG=1).
2020-07-01 22:54:52 +10:00
Glenn Ruben Bakke
f22f7b285e nrf/bluetooth/ble_uart: Swap end character on cooked strings.
Changing line ending character of cooked strings makes rshell/pyboard.py
work correctly over Bluetooth socat/pts devices.
2020-07-01 22:51:30 +10:00
Glenn Ruben Bakke
5996bf72f1 nrf/bluetooth/ble_uart: Fix random advertisement name.
The storage space of the advertisement name is not declared static, leading
to a random advertisement name.  This commit fixes the issue by declaring
it static.
2020-07-01 22:50:56 +10:00
Glenn Ruben Bakke
ab0c14dba0 nrf/bluetooth/ble_uart: Add mp_hal_stdio_poll function.
This adds support for enabling MICROPY_PY_SYS_STDFILES when running UART
over Bluetooth (NUS).
2020-07-01 22:50:41 +10:00
Glenn Ruben Bakke
fc1f22a097 nrf/bluetooth: Handle data length update request.
The Bluetooth link gets disconnected when connecting from a PC after 30-40
seconds.  This commit adds handling of the data length update request.  The
data length parameter pointer is set to NULL in the reply,  letting the
SoftDevice automatically set values and use them in the data length update
procedure.
2020-07-01 22:49:04 +10:00
Glenn Ruben Bakke
9dfb4ae6aa nrf/bluetooth/ble_uart: Fix implicit declaration of function.
mp_keyboard_interrupt() triggers a compiler error because the function is
implicitly declared.  This commit adds "py/runtime.h" to the includes.

Fixes issue #5732.
2020-07-01 22:48:25 +10:00
Glenn Ruben Bakke
8d71cc2e7d nrf/bluetooth: Use MP_ERROR_TEXT for all error messages.
This follows up on commit def76fe4d9.

Fixes issue #6152.
2020-06-17 11:33:22 +10:00
Jim Mussared
cd9a8c1742 nrf: Add openocd as a supported flasher.
Tested with the Particle Debugger on a Xenon.
2020-05-15 15:06:02 +10:00
Jim Mussared
e7f8c7d9a3 nrf: Update to work with nrfx v2.0.0, to match TinyUSB.
Commit 6cea369b89 updated the TinyUSB
submodule to a version based on nrfx v2.0.0.  This commit updates the nrf
port to work with the latest TinyUSB and nrfx v2.0.0.
2020-05-15 15:06:02 +10:00
Damien George
8f348778e1 nrf/mphalport: Remove need for "syntax unified" in mp_hal_delay_us.
Because it can confuse older versions of gcc.  Instead use the correct
instruction for Thumb vs Thumb-2 (sub vs subs) so the assembler emits the
2-byte instruction.

Related to commit 1aa9ff9141.
2020-05-15 15:04:49 +10:00
Damien George
eb5e9c00f8 nrf/Makefile: Don't use -fno-builtin for Cortex-M0 builds.
So that error string compression is optimised correctly (it needs strcmp to
be optimised away by the compiler).
2020-05-15 13:39:12 +10:00
stijn
84fa3312cf all: Format code to add space after C++-style comment start.
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
2020-04-23 11:24:25 +10:00
stijn
d6243568a0 all: Remove commented-out include statements. 2020-04-23 11:24:15 +10:00
Damien George
8e048d2548 all: Clean up error strings to use lowercase and change cannot to can't.
Now that error string compression is supported it's more important to have
consistent error string formatting (eg all lowercase English words,
consistent contractions).  This commit cleans up some of the strings to
make them more consistent.
2020-04-13 22:19:37 +10:00
Jim Mussared
073b9a5eb8 ports: Enable error text compression for various ports, but not all.
Enabled on: bare-arm, minimal, unix coverage/dev/minimal, stm32, esp32,
esp8266, cc3200, teensy, qemu-arm, nrf.  Not enabled on others to be able
to test the code when the feature is disabled (the default case).

Code size change for this commit:

   bare-arm:  -600 -0.906%
minimal x86:  -308 -0.208%
   unix x64:    +0 +0.000%
unix nanbox:    +0 +0.000%
      stm32: -3368 -0.869% PYBV10
     cc3200: -1024 -0.558%
    esp8266: -2512 -0.368% GENERIC
      esp32: -2876 -0.205% GENERIC[incl -3168(data)]
        nrf: -1708 -1.173% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-04-05 15:02:06 +10:00
Jim Mussared
def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Zoltán Vörös
c5cc64175b ports: Add lib/libm/roundf.c to bare-metal Makefile's.
This function is not used by the core but having it as part of the build
allows it to be used by user C modules, or board extensions.  The linker
won't include it in the final firmware if it remains unused.
2020-03-25 01:22:00 +11:00
Damien George
feb2577585 all: Remove spaces between nested paren and inside function arg paren.
Using new options enabled in the uncrustify configuration.
2020-03-25 00:39:46 +11:00
Damien George
ad9a0ec8ab all: Convert exceptions to use mp_raise_XXX helpers in remaining places. 2020-03-18 17:26:19 +11:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George
3f39d18c2b all: Add *FORMAT-OFF* in various places.
This string is recognised by uncrustify, to disable formatting in the
region marked by these comments.  This is necessary in the qstrdef*.h files
to prevent modification of the strings within the Q(...).  In other places
it is used to prevent excessive reformatting that would make the code less
readable.
2020-02-28 10:31:07 +11:00
Damien George
ac8383a95d nrf: Use MICROPY_HW_ENABLE_RNG instead of MICROPY_PY_RANDOM_HW_RNG.
The "random" module no longer uses the hardware RNG (the extmod version of
this module has a pseudo-random number generator), so the config option
MICROPY_PY_RANDOM_HW_RNG is no longer meaningful.  This commit replaces it
with MICROPY_HW_ENABLE_RNG, which controls whether the hardware RNG is
included in the build.
2020-02-18 12:43:16 +11:00
Damien George
6ad3bb1e12 nrf: Remove custom "random" module and use extmod version instead.
Hardware RNG code is moved to drivers/rng.[ch].
2020-02-18 12:43:16 +11:00