Commit Graph

9610 Commits

Author SHA1 Message Date
Damien George
9639e0d26f stm32/sdram: Add support for 32-bit wide data bus and 256MB in MPU cfg. 2018-09-20 11:29:37 +10:00
Damien George
dc77fdb7d4 drivers/display/lcd160cr.py: In fast_spi, send command before flushing.
The intention of oflush() is to flush the "fast SPI" command itself so that
the SPI object is ready to use when the function returns.
2018-09-18 13:49:49 +10:00
Damien George
7c4f98db85 stm32/dma: Get DMA working on F0 MCUs.
Changes made:
- fix DMA_SUB_INSTANCE_AS_UINT8
- fix dma_id numbers in dma_descr_t
- add F0 DMA IRQ handlers
- set DmaBaseAddress and ChannelIndex when reinit'ing
2018-09-16 23:16:10 +10:00
Damien George
7e3dd9f8a3 py/asmthumb: Detect presence of I-cache using CMSIS macro.
Fixes issue #4113.
2018-09-16 01:50:45 +10:00
Damien George
30a45360e7 py/asmxtensa: Make indirect calls using func table, not raw pointers.
Loading a pointer by indexing into the native function table mp_fun_table,
rather than loading an immediate value (via a PC-relative load), uses less
code space.
2018-09-16 00:43:24 +10:00
Damien George
93d71c5436 py/emitnative: Make viper funcs run with their correct globals context.
Viper functions will now capture the globals at the point they were defined
and use these globals when executing.
2018-09-15 22:39:27 +10:00
Damien George
f12e039c2b py/emitnative: Use macros instead of raw offsetof for slot locations.
Old globals are now stored in the second slot (ip in mp_code_state_t) to
make things simpler for viper.
2018-09-15 22:39:27 +10:00
Damien George
a676b5acf6 py/emitnative: Support arbitrary number of arguments to viper functions. 2018-09-15 22:39:27 +10:00
Damien George
43f1848bfa py: Make viper functions have the same entry signature as native.
This commit makes viper functions have the same signature as native
functions, at the level of the emitter/assembler.  This means that viper
functions can now be wrapped in the same uPy object as native functions.

Viper functions are now responsible for parsing their arguments (before it
was done by the runtime), and this makes calling them more efficient (in
most cases) because the viper entry code can be custom generated to suit
the signature of the function.

This change also opens the way forward for viper functions to take
arbitrary numbers of arguments, and for them to handle globals correctly,
among other things.
2018-09-15 22:39:27 +10:00
Damien George
460954734e py/emitnative: Reuse mp_native_type_from_qstr when searching for a cast. 2018-09-15 13:52:58 +10:00
Damien George
9f2067288a py/compile: Factor code that compiles viper type annotations. 2018-09-15 13:44:39 +10:00
Damien George
a169a5848c py/compile: Merge viper annotation and normal param compilation stages.
Now that the compiler can store the results of the viper types in the
scope, the viper parameter annotation compilation stage can be merged with
the normal parameter compilation stage.
2018-09-15 13:20:54 +10:00
Damien George
80db30a510 py/emit: Completely remove set_native_type, arg type is set in compiler.
In viper mode, the type of the argument is now stored in id_info->flags.
2018-09-15 13:00:11 +10:00
Damien George
07caf4f969 py/emit: Remove need to call set_native_type to set viper return type.
Instead this return type is now stored in the scope_flags.
2018-09-15 12:41:25 +10:00
Damien George
1d7c221b30 py/emit: Remove need to call set_native_type to set native/viper mode.
The native emitter can easily determine the mode via scope->emit_options.
2018-09-15 12:17:14 +10:00
Damien George
3751512e9d py/emit: Move MP_EMIT_OPT_xxx enums from compile.h to emitglue.h. 2018-09-15 12:17:09 +10:00
Damien George
abb536da49 py/{asmx86,asmx64}: Extend test_r8_with_r8 to accept all 8 lower regs. 2018-09-14 17:38:09 +10:00
Damien George
dd522d63b6 py/asmx64: Fix bug in assembler when creating disp with r13 and 0 offset 2018-09-14 17:36:09 +10:00
Damien George
9f241ef398 py: Optimise call to mp_arg_check_num by compressing fun signature.
With 5 arguments to mp_arg_check_num(), some architectures need to pass
values on the stack.  So compressing n_args_min, n_args_max, takes_kw into
a single word and passing only 3 arguments makes the call more efficient,
because almost all calls to this function pass in constant values.  Code
size is also reduced by a decent amount:

   bare-arm:  -116
minimal x86:   -64
   unix x64:  -256
unix nanbox:  -112
      stm32:  -324
     cc3200:  -192
    esp8266:  -192
      esp32:  -144
2018-09-14 13:39:17 +10:00
Damien George
0f4d595beb examples/embedding: Fix hard-coded MP_QSTR_ value. 2018-09-14 13:33:08 +10:00
Dave Hylands
1a2c511e5d examples/embedding: Fix reference to freed memory, lexer src name.
This issue was brought up by BramPeters in the forum:
https://forum.micropython.org/viewtopic.php?p=30066
2018-09-14 13:27:43 +10:00
Siarhei Farbotka
e62f59217b esp32: Fix int overflow in machine.sleep/deepsleep functions. 2018-09-14 13:25:45 +10:00
Paul Sokolovsky
064b8e0e8d unix/modos: Include extmod/vfs.h for MP_S_IFDIR, etc.
If DTTOIF() macro is not defined, the code refers to MP_S_IFDIR, etc.
symbols defined in extmod/vfs.h, so should include it.

This fixes build for Android.
2018-09-14 13:22:50 +10:00
Paul Sokolovsky
0bce110872 zephyr/CMakeLists: Update for latest Zephyr CMake usage refactorings.
Added cmake_minimum_required and updated target_link_libraries directives.
2018-09-14 13:21:13 +10:00
Paul Sokolovsky
ed1a5bc88e zephyr/prj_base.conf: Update for net_config subsys refactor.
net_config subsystem was split off from net_app, and as a result, settings
need renaming from CONFIG_NET_APP_* to CONFIG_NET_CONFIG_*.
2018-09-14 13:21:13 +10:00
Damien George
4f3d9429b5 py: Fix native functions so they run with their correct globals context.
Prior to this commit a function compiled with the native decorator
@micropython.native would not work correctly when accessing global
variables, because the globals dict was not being set upon function entry.

This commit fixes this problem by, upon function entry, setting as the
current globals dict the globals dict context the function was defined
within, as per normal Python semantics, and as bytecode does.  Upon
function exit the original globals dict is restored.

In order to restore the globals dict when an exception is raised the native
function must guard its internals with an nlr_push/nlr_pop pair.  Because
this push/pop is relatively expensive, in both C stack usage for the
nlr_buf_t and CPU execution time, the implementation here optimises things
as much as possible.  First, the compiler keeps track of whether a function
even needs to access global variables.  Using this information the native
emitter then generates three different kinds of code:

1. no globals used, no exception handlers: no nlr handling code and no
   setting of the globals dict.

2. globals used, no exception handlers: an nlr_buf_t is allocated on the
   C stack but it is not used if the globals dict is unchanged, saving
   execution time because nlr_push/nlr_pop don't need to run.

3. function has exception handlers, may use globals: an nlr_buf_t is
   allocated and nlr_push/nlr_pop are always called.

In the end, native functions that don't access globals and don't have
exception handlers will run more efficiently than those that do.

Fixes issue #1573.
2018-09-13 22:47:20 +10:00
Damien George
9fb1f18cf4 stm32/sdcard: Fully reset SDMMC periph before calling HAL DMA functions.
The HAL DMA functions enable SDMMC interrupts before fully resetting the
peripheral, and this can lead to a DTIMEOUT IRQ during the initialisation
of the DMA transfer, which then clears out the DMA state and leads to the
read/write not working at all.  The DTIMEOUT is there from previous SDMMC
DMA transfers, even those that succeeded, and is of duration ~180 seconds,
which is 0xffffffff / 24MHz (default DTIMER value, and clock of
peripheral).

To work around this issue, fully reset the SDMMC peripheral before calling
the HAL SD DMA functions.

Fixes issue #4110.
2018-09-12 17:02:17 +10:00
Damien George
e6a6ded74e unix/mpconfigport_coverage.h: Enable uhashlib.md5. 2018-09-12 16:09:41 +10:00
Damien George
05959c6465 extmod/moduhashlib: Add md5 implementation using mbedtls. 2018-09-12 16:08:53 +10:00
Damien George
87d45f4d49 extmod/moduhashlib: Use newer message digest API for mbedtls >=2.7.0.
Since mbedtls 2.7.0 new digest functions were introduced with a "_ret"
suffix to allow the functions to return an error message (eg, if the
underlying hardware acceleration failed).  These new functions must be used
instead of the old ones to prevent deprecation warnings, or link errors for
missing functions, depending on the mbedtls configuration.
2018-09-12 16:04:18 +10:00
Damien George
6b3d6da74b stm32/flashbdev: Protect flash writes from cache flushing and USB MSC. 2018-09-12 15:58:42 +10:00
Damien George
0941a467e7 stm32: Change flash IRQ priority from 2 to 6 to prevent preemption.
The flash-IRQ handler is used to flush the storage cache, ie write
outstanding block data from RAM to flash.  This is triggered by a timeout,
or by a direct call to flush all storage caches.

Prior to this commit, a timeout could trigger the cache flushing to occur
during the execution of a read/write to external SPI flash storage.  In
such a case the storage subsystem would break down.

SPI storage transfers are already protected against USB IRQs, so by
changing the priority of the flash IRQ to that of the USB IRQ (what is
done in this commit) the SPI transfers can be protected against any
timeouts triggering a cache flush (the cache flush would be postponed until
after the transfer finished, but note that in the case of SPI writes the
timeout is rescheduled after the transfer finishes).

The handling of internal flash sync'ing needs to be changed to directly
call flash_bdev_irq_handler() sync may be called with the IRQ priority
already raised (eg when called from a USB MSC IRQ handler).
2018-09-12 15:46:04 +10:00
Damien George
6f015d337d stm32/spi: Be sure to set all SPI config values in SPI proto init. 2018-09-11 17:36:11 +10:00
Damien George
c26516d40f stm32/sdcard: Move temporary DMA state from BSS to stack. 2018-09-11 17:23:27 +10:00
Damien George
e4f7001d9c stm32/sdcard: Use only a single DMA stream for both SDIO TX/RX.
No need to be wasteful on DMA resources.
2018-09-11 17:21:22 +10:00
Damien George
d7e2ac4a6a stm32/dma: Reinitialise the DMA if the direction changed on the channel. 2018-09-11 17:19:55 +10:00
Damien George
b0c8a94b41 stm32/dma: Pass DMA direction as parameter to dma_init not in cfg struct
Some DMA channels (eg for SDIO) can be used in both directions and this
patch allows such peripherals to dynamically select the DMA direction.
2018-09-11 17:18:06 +10:00
Damien George
47550ef2cd stm32: For MCUs that have PLLSAI allow to set SYSCLK at 2MHz increments.
MCUs that have a PLLSAI can use it to generate a 48MHz clock for USB, SDIO
and RNG peripherals.  In such cases the SYSCLK is not restricted to values
that allow the system PLL to generate 48MHz, but can be any frequency.
This patch allows such configurability for F7 MCUs, allowing the SYSCLK to
be set in 2MHz increments via machine.freq().  PLLSAI will only be enabled
if needed, and consumes about 1mA extra.  This fine grained control of
frequency is useful to get accurate SPI baudrates, for example.
2018-09-11 16:42:57 +10:00
Damien George
f2de9d60f7 py/emitnative: Fix try-finally in outer scope, so finally is cancelled. 2018-09-11 15:33:25 +10:00
roland
67ee4e2401 stm32/boards/STM32L476DISC: Enable external RTC xtal to get RTC working. 2018-09-11 15:23:19 +10:00
Andrew Leech
670a2a3396 stm32/Makefile: Allow external BOARD_DIR directory to be specified.
This makes it easy to add a custom board definition outside of the
micropython tree, keeping the micropython submodule clean and official.
2018-09-11 15:15:21 +10:00
Paul Sokolovsky
674e069ba9 py/objarray: bytearray: Allow 2nd/3rd arg to constructor.
If bytearray is constructed from str, a second argument of encoding is
required (in CPython), and third arg of Unicode error handling is allowed,
e.g.:

bytearray("str", "utf-8", "strict")

This is similar to bytes:

bytes("str", "utf-8", "strict")

This patch just allows to pass 2nd/3rd arguments to bytearray, but
doesn't try to validate them to not impact code size. (This is also
similar to how bytes constructor is handled, though it does a bit
more validation, e.g. check that in case of str arg, encoding argument
is passed.)
2018-09-11 15:10:10 +10:00
Paul Sokolovsky
b6ebb4f04e tests/extmod/uhashlib_md5: Add coverage tests for MD5 algorithm.
Based on tests/extmod/uhashlib_sha1.
2018-09-11 14:52:00 +10:00
Paul Sokolovsky
5fe3730a30 extmod/moduhashlib: Add md5 implementation, using axTLS.
MD5 is still widely used, and may be important in some cases for networking
interoperability, e.g. HTTP Digest authentication.
2018-09-11 14:51:52 +10:00
stijn
89516b2b62 py/runtime: Fix incorrect test for MICROPY_PORT_DEINIT_FUNC. 2018-09-11 00:38:31 +10:00
Paul Sokolovsky
5615273bb0 unix/Makefile: Build libffi inside $BUILD.
Avoids polluting the source tree, allows to build for different (sub)archs
without intermediate cleaning.
2018-09-10 11:34:46 +03:00
Damien George
5cd2c7f2e7 esp8266/main: Increase heap by 2kb, now that axtls rodata is in ROM. 2018-09-08 00:09:03 +10:00
Damien George
eed83caf1d esp8266/Makefile: Remove build of libaxtls.a and add back tuned config. 2018-09-08 00:07:23 +10:00
Damien George
6ad5355e43 unix/Makefile: Remove building of libaxtls.a which is no longer needed. 2018-09-08 00:07:23 +10:00
Damien George
0be2ea50e9 py/py.mk: Build axtls library directly from its source files.
This removes the need for a separate axtls build stage, and builds all
axtls object files along with other code.  This simplifies and cleans up
the build process, automatically builds axtls when needed, and puts the
axtls object files in the correct $(BUILD) location.

The MicroPython axtls configuration file is provided in
extmod/axtls-include/config.h
2018-09-08 00:07:23 +10:00