Commit Graph

89 Commits

Author SHA1 Message Date
Paul Sokolovsky
3a84c8b58d string0.c: Move from stmhal/ to lib/. 2015-04-05 21:57:55 +03:00
Damien George
f44ace11fb stmhal: Put flash in deep power-down mode when entering stop mode.
This can get PYBv1.0 stop current down to around 290uA.
2015-03-22 17:55:50 +00:00
Damien George
4f94d90d4d stmhal: Include fatfs headers using lib/fatfs prefix.
This helps make files reusable across other ports.
2015-03-04 20:35:41 +00:00
Damien George
9ab94c468c lib/libm: Add implementations of erf, erfc, lgamma, tgamma. 2015-02-22 14:47:11 +00:00
Damien George
39ce2db181 stmhal: Add "CDC" option to pyb.usb_mode, for CDC device only. 2015-02-13 14:02:51 +00:00
Damien George
b384bcc5de stmhal: Remove unused usbdev files, and move used ones up a dir.
The unused files are from the ST demos for different USB classes and are
not needed for the stmhal port.
2015-02-13 14:02:51 +00:00
Damien George
6d1f5070ce lib/libm: Add frexp and modf functions; use in stmhal; add tests.
Addresses issue #1081.
2015-01-22 13:48:29 +00:00
Paul Sokolovsky
a7bcb218fe stmhal: Move readline code to lib/mp-readline/. 2015-01-12 04:15:35 +02:00
Damien George
2cf6dfa280 stmhal: Prefix includes with py/; remove need for -I../py. 2015-01-01 21:06:20 +00:00
Damien George
7690b13953 stmhal: Add ability to mount custom block device. 2014-12-27 20:20:51 +00:00
Damien George
20236a8a99 stmhal: Upgrade to latest fatfs driver. 2014-12-27 17:36:16 +00:00
Paul Sokolovsky
3b74c91684 Makefiles: Support py/*.h includes per #1022. 2014-12-27 16:32:52 +02:00
Damien George
f04329e93b lib/libm: Add acosh, asinh, atanh, tan; get working with stmhal.
acoshf, asinhf, atanhf were added from musl.  mathsincos.c was
split up into its original, separate files (from newlibe-nano-2).
tan was added.

All of the important missing float functions are now implemented,
and pyboard now passes tests/float/math_fun.py (finally!).
2014-12-18 14:44:02 +00:00
Damien George
29a1ec1bd6 stmhal: Overhaul network drivers; has generic network protocol in C.
This patch overhauls the network driver interface.  A generic NIC must
provide a set of C-level functions to implement low-level socket control
(eg socket, bind, connect, send, recv).  Doing this, the network and
usocket modules can then use such a NIC to implement proper socket
control at the Python level.

This patch also updates the CC3K and WIZNET5K drivers to conform to the
new interface, and fixes some bugs in the drivers.  They now work
reasonably well.
2014-12-04 18:57:57 +00:00
Damien George
57c70d6073 stmhal: Move RTC HAL init functions to rtc.c, where they belong.
So can remove unnecessary stm32f4xx_hal_msp.c file.
2014-12-02 12:40:37 +00:00
Damien George
1559a97810 py: Add builtin round function.
Addresses issue #934.
2014-10-31 11:28:50 +00:00
stijn
4e54c876a7 Add -Wpointer-arith flag to prevent problems with pointer arithmetic on void* 2014-10-29 10:29:09 +01:00
Damien George
185cb0d943 stmhal: Use OSError with POSIX error code for HAL errors.
Addresses issue #921.
2014-10-23 14:25:32 +01:00
Dave Hylands
842210f53a Add pydfu.py to the micropython tree. Use dfu_util bgy default
You can do:

make USE_PYDFU=1 deploy

to use pydfu.py
2014-10-22 20:18:38 +01:00
Damien George
50062587c7 stmhal: Oops: rename mod files in Makefile. 2014-10-12 20:35:21 +01:00
Damien George
9b6617ea8b stmhal: Add pyb.stop() and pyb.standby() functions. 2014-10-09 19:02:47 +01:00
Damien George
fec70ad369 stmhal: Remove long-obsolete pybwlan.[ch] files from old CC3k driver. 2014-10-06 15:40:25 +00:00
Damien George
3550de4ebe stmhal: Add basic CAN bus support. 2014-10-02 17:32:02 +01:00
Damien George
de37775a26 stmhal: Enable patch_program in cc3k driver, with key. 2014-09-30 23:43:38 +01:00
Damien George
3a1c4c5bc6 stmhal: Add network and usocket module.
As per issue #876, the network module is used to configure NICs
(hardware modules) and configure routing.  The usocket module is
supposed to implement the normal Python socket module and selects the
underlying NIC using routing logic.

Right now the routing logic is brain dead: first-initialised,
first-used.  And the routing table is just a list of registered NICs.

cc3k and wiznet5k work, but not at the same time due to C name clashes
(to be fixed).

Note that the usocket module has alias socket, so that one can import
socket and it works as normal.  But you can also override socket with
your own module, using usocket at the backend.
2014-09-30 22:36:47 +01:00
Damien George
b766e79510 stmhal: Initial implementation of cc3k module and driver.
Pulled in and modified work done by mux/iabdalkader on cc3k driver, from
iabdalkader-cc3k-update branch.  That branch was terribly messy and had
too many conflicts to merge neatly.
2014-09-26 00:57:26 +01:00
Damien George
8594ce2280 py: Implement divmod, % and proper // for floating point.
Tested and working on unix and pyboard.
2014-09-13 18:43:09 +01:00
Damien George
20beff9ae3 py and libm: Add asinf,acosf; print higher precision for float.
Also use less stack space when printing single precision float.

Addition of asinf and acosf addresses issue #851.
2014-09-11 22:24:45 +01:00
Damien George
6c9c7bc75a stmhal: Implement generic select.select and select.poll. 2014-09-07 20:40:32 +01:00
Damien George
bcf041f1a3 stmhal: Add wiznet5k module, to control WIZnet ethernet adaptor.
Allows to create socket objects that support TCP and UDP in server and
client mode.  Interface is very close to standard Python socket class,
except bind and accept do not work the same (due to hardware not
supporting them in the usual way).

Not compiled by default.  To compile this module, use:
make MICROPY_PY_WIZNET5K=1
2014-09-01 22:52:38 +01:00
Damien George
8707ea3421 lib: Add lib and libm, moving current files from stmhal.
Top-level lib directory is for standard C libraries that we want to
provide our own versions of (for efficiency and stand-alone reasons).
It currently has libm in it for math functions.

Also add atanf and atan2f, which addresses issue #837.
2014-08-29 22:42:26 +01:00
Dave Hylands
9480138f0c Add save/restore_irq
Factored irq functions into a separate file.
2014-08-25 12:22:11 +01:00
Dave Hylands
3d945559d4 Added python script to map AF to a pin name
Added some functions to Pin class to query mode, pull, and af
2014-08-24 18:21:08 +01:00
Dave Hylands
3688414d9d Put some code into the first 16K of flash
This basically shrinks the remaining size of flash in the portion
that goes after the internal flash drive.
2014-08-16 08:00:12 -07:00
Damien George
244476e3e6 stmhal: For non-debug compile, enable CC/LD opt to remove dead code.
Saves over 35k ROM due to elimination of unused HAL functions.  All
tests pass.

Addresses issue #702.
2014-08-16 13:37:05 +01:00
Damien George
284efa89ae stmhal/teensy: Use _ instead of - in source file names.
Trying to move towards consistency, let's use _ exclusively in names of
source files (eg .c, .h, .csv).
2014-08-08 22:34:06 +01:00
Dave Hylands
6f418fc1b0 Add support for selecting pin alternate functions from python.
Converts generted pins to use qstrs instead of string pointers.

This patch also adds the following functions:
pyb.Pin.names()
pyb.Pin.af_list()
pyb.Pin.gpio()

dir(pyb.Pin.board) and dir(pyb.Pin.cpu) also produce useful results.

pyb.Pin now takes kw args.

pyb.Pin.__str__ now prints more useful information about the pin
configuration.

I found the following functions in my boot.py to be useful:
```python
def pins():
    for pin_name in dir(pyb.Pin.board):
        pin = pyb.Pin(pin_name)
        print('{:10s} {:s}'.format(pin_name, str(pin)))

def af():
    for pin_name in dir(pyb.Pin.board):
        pin = pyb.Pin(pin_name)
        print('{:10s} {:s}'.format(pin_name, str(pin.af_list())))
```
2014-08-07 23:15:41 -07:00
Damien George
3ef911345c stmhal: Update STM32Cube F4 HAL driver to V1.3.0.
This patch updates ST's HAL to the latest version, V1.3.0, dated 19 June
2014.  Files were copied verbatim from the ST package.  Only change was
to suppress compiler warning of unused variables in 4 places.

A lot of the changes from ST are cosmetic: comments and white space.
Some small code changes here and there, and addition of F411 header.

Main code change is how SysTick interrupt is set: it now has a
configuration variable to set the priority, so we no longer need to work
around this (originall in system_stm32f4xx.c).
2014-08-06 22:33:31 +01:00
Damien George
65dd7bc13d stmhal: Change 0:/ and 1:/ to /flash and /sd; add CWD support.
Some important changes to the way the file system is structured on the
pyboard:

1. 0: and 1: drive names are now replaced with POSIX inspired
directories, namely /flash and /sd.

2. Filesystem now supports the notion of a current working directory.
Supports the standard Python way of manipulating it: os.chdir and
os.getcwd.

3. On boot up, current directory is /flash if no SD inserted, else /sd
if SD inserted.  Then runs boot.py and main.py from the current dir.
This is the same as the old behaviour, but is much more consistent and
flexible (eg you can os.chdir in boot.py to change where main.py is run
from).

4. sys.path (for import) is now set to '' (current dir), plus /flash
and /flash/lib, and then /sd and /sd/lib if SD inserted.  This, along
with CWD, means that import now works properly.  You can import a file
from the current directory.

5. os.listdir is fixed to return just the basename, not the full path.

See issue #537 for background and discussion.
2014-07-31 23:44:04 +01:00
Dave Hylands
a2e7a1315d Allow DFU_UTIL to be overridden from the environment. 2014-07-21 16:28:07 -07:00
Windel Bouwman
b6af4c8104 Added hexfile target 2014-06-20 16:14:55 +02:00
Sven Wegener
c3cabf4e33 bare-arm, stmhal, teensy: Duplicate -nostdlib to CFLAGS
As we are building with -nostdlib gcc features like the stack protector
will fail linking, because the failure handlers are in gcc's internal
libs. Such features are implicitly disabled during compilation when
-nostdlib is used in CFLAGS too.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
2014-06-18 13:34:07 +02:00
Sven Wegener
afc67c6dc5 bare-arm, stmhal: Fix --nostdlib to -nostdlib
-nostdlib is the correct option, gcc recognizes the double dash version
when in link-only mode, but not when compiling.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
2014-06-18 13:33:47 +02:00
Craig Barnes
c9f9e547d6 Add device ID to deploy make target for stmhal. 2014-05-03 19:51:47 +01:00
Damien George
aad1204b8e stmhal: Change names: flash to firmware, flashboard to deploy.
Since firmware lives in a build directory which already specifies the
board name, no real reason to also have the firmware have the board
name.
2014-05-03 17:46:45 +01:00
Damien George
51315614e1 stmhal: Default build directory now includes board name.
BUILD is build-$(BOARD) by default.
2014-05-03 17:39:07 +01:00
Andrew Scheller
ed9d8d6354 Add flashboard target to the stmhal Makefile to run dfu-util
Which allows you to run "make -C stmhal flashboard" from the top-level directory.
Also ties in nicely with my configurable BUILD directory from #506
2014-05-01 02:51:29 +01:00
Damien George
4ae52d454c stmhal: Reinstate CC3000 driver from old stm/ port.
It's not enabled by default because it doesn't fully work.  It can
connect to an AP, get an IP address and do a host-lookup, but not yet do
send or recv on a socket.
2014-04-30 20:47:50 +01:00
Damien George
7533700393 stmhal: Rename USART to UART.
It's really a UART because there is no external clock line (and hence no
synchronous ability, at least in the implementation of this module).
USART should be reserved for a module that has "S"ynchronous capabilities.

Also, UART is shorter and easier to type :)
2014-04-21 12:03:09 +01:00
Damien George
eb8bdf4df3 stmhal, SPI and I2C: Improvements to functionality and consistency. 2014-04-21 00:10:04 +01:00