Commit Graph

59 Commits

Author SHA1 Message Date
Daniel Mizyrycki
2df6a0436d nrf/boards/particle_xenon: Enable USB CDC on Particle Xenon board. 2019-12-09 14:10:24 +11:00
Damien George
c13f9f209d all: Convert nlr_raise(mp_obj_new_exception_msg(x)) to mp_raise_msg(x).
This helper function was added a while ago and these are the remaining
cases to convert, to save a bit of code size.
2019-11-05 11:35:45 +11:00
Glenn Ruben Bakke
98c2eabaff nrf/boards: Add nrf9160 pca10090 board. 2019-10-10 21:36:20 +02:00
Glenn Ruben Bakke
82fe6b0526 nrf: Add nrf9160 base support.
This patch add basic building blocks for nrf9P60.

It also includes a secure bootloader which forwards all
possible peripherals that are user selectable to become
non-secure. After configuring Flash, RAM and peripherals
the secure bootloader will jump to the non-secure domain
where MicroPython is placed.

The minimum size of a secure boot has to be a flash
block of 32Kb, hence why the linker scripts are
offsetting the main application this much.

The RAM offset is set to 128K, to allow for later
integration of Nordic Semiconductor's BSD socket
library which reserves the range 0x20010000 - 0x2001FFFF.
2019-10-10 21:35:27 +02:00
Glenn Ruben Bakke
01a3110e36 nrf/boards: Add support for pca10059.
Add support for pca10059 with REPL over tinyusb USB CDC.

The board also includes a board specific module that will
recover UICR->REGOUT0 in case this has been erased.

This initial support does not preserve any existing bootloader
on the pca10090 in case this was present, and expects to use all
available flash on the device.
2019-10-10 20:21:07 +02:00
roland van straten
ac112f88d0 nrf/boards: Add board definition for uBlox Nina B1 series BLE modules. 2019-09-17 11:33:48 +10:00
Jim Mussared
1f52a6f8e4 nrf/boards: Add Particle Xenon board configuration (an nRF52840). 2019-09-05 22:56:05 +10:00
Jim Mussared
353ed7705f nrf/boards/make-pins.py: Fix gen of board pins to use correct index.
It was previously not taking into account that the list of pins was sparse,
so using the wrong index.  The boards/X/pins.csv was generating the wrong
data for machine.Pin.board.

As part of this fix rename the variables to make it more clear what the
list contains (only board pins).
2019-09-05 22:52:24 +10:00
Damien George
1fe1ff935b nrf: Clean up source by removing tabs, trailing spaces, non-ASCII chars. 2019-08-28 13:34:45 +10:00
Glenn Ruben Bakke
d889def06b nrf/led: Adjust how board LEDs are defined.
Change static LED functions to lowercase names, and trim down source code
lines for variants of MICROPY_HW_LED_COUNT.  Also rename configuration for
MICROPY_HW_LEDx_LEVEL to MICROPY_HW_LEDx_PULLUP to align with global PULLUP
configuration.
2019-06-25 16:02:31 +10:00
Damien George
7e21cf723a nrf: Change types to size_t for all uses of mp_obj_str_get_data. 2019-05-13 12:39:56 +10:00
Nguyen Hoan Hoang
9a6f6fd68d nrf/boards: Add support for BLYST Nano module based boards.
- IBK-BLYST-NANO: Breakout board
- IDK-BLYST-NANO: DevKit board with builtin IDAP-M CMSIS-DAP Debug JTAG,
  RGB led
- BLUEIO-TAG-EVIM: Sensor tag board (environmental sensor
  (T, H, P, Air quality) + 9 axis motion sensor)

Also, the LED module has been updated to support individual base level
configuration of each LED. If set, this will be used instead of the
common configuration, MICROPY_HW_LED_PULLUP. The new configuration,
MICROPY_HW_LEDX_LEVEL, where X is the LED number can be used to set
the base level of the specific LED.
2019-05-02 22:33:44 +02:00
Glenn Ruben Bakke
696549d2e5 nrf/bluetooth: Deprecate use of SoftDevice s140 v6.0.0.
Removing linker script for nrf52840 s140 v6.0.0 as pca10056
target board now points to the new v6.1.1. Also, removing the
entry from the download_ble_stack.sh script.
2019-03-15 20:50:15 +01:00
Glenn Ruben Bakke
a3a266a9c3 nrf/board: Migrate nrf52840 target to new BLE stack.
This patch moves pca10056/nrf52840 target board to use
the new SoftDevice s140 v6.1.1 instead of the legacy v6.0.0.
2019-03-15 20:50:15 +01:00
Glenn Ruben Bakke
d3c1436e75 nrf/bluetooth: Add support for SoftDevice s140 version 6.1.1.
Updating download script to fetch the new SoftDevice, and
adding corresponding linker script for the BLE stack.
2019-03-15 20:50:15 +01:00
Glenn Ruben Bakke
1e5e3e3d48 nrf/bluetooth: Deprecate use of SoftDevice s132 v6.0.0.
Removing linker script for nrf52832 s132 v6.0.0 as all target
boards now points to the new v6.1.1. Also, removing the entry
from the download_ble_stack.sh script.
2019-03-15 20:50:15 +01:00
Glenn Ruben Bakke
5f26ef1112 nrf/board: Migrate all nrf52832 targets to new BLE stack.
This patch moves all the nrf52832 target boards to use the
new SoftDevice s132 v6.1.1 instead of the legacy v6.0.0.
2019-03-15 20:50:15 +01:00
Nguyen Hoan Hoang
e8ed2dea71 nrf/bluetooth: Add support for SoftDevice s132 version 6.1.1.
Updating download script to fetch the new SoftDevice, and
adding corresponding linker script for the BLE stack.
2019-03-15 20:50:15 +01:00
Damien George
6e30f96b0b ports: Convert legacy uppercase macro names to lowercase. 2019-02-12 14:54:51 +11:00
Damien George
6ac4304284 nrf/boards/microbit: Use MICROPY_PY_BUILTINS_FLOAT to detect FP support.
This works for both single and double precision float.
2018-07-20 14:11:28 +10:00
Damien George
9addc38af4 nrf: Properly use (void) instead of () for function definitions. 2018-07-20 14:11:28 +10:00
Ayke van Laethem
2f0f4fdcd3
nrf: Use mp_raise_ValueError instead of nlr_raise(...)
Saves 60 bytes on the nRF52 with SD disabled. There will be a bigger
saving with SD enabled and/or on the micro:bit board.
2018-07-18 15:25:17 +02:00
Glenn Ruben Bakke
cf58ef27af nrf: Quick-fix on const objects with open array dimension in objtuples.
Temporarly solving the issue of
"differ from the size of original declaration [-Werror=lto-type-mismatch]
until linker is fixed in upcomming release of gcc.

Bug is reported by others, and will be fixed in next version of arm-gcc.
However, this patch makes it possible to use modmusic and modimage
with current compilers.

Alternativly, the code can be compiled with LTO=0, but uses valuable 9K
more on this already squeezed target (microbit).
2018-07-18 17:12:26 +10:00
Ayke van Laethem
0e5f8425ea nrf/boards: Check for stack/heap size using an assert.
The main effect of this is that the .bss is now accurate and doesn't
include the stack and minimum heap size.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
7144e87ced nrf/bluetooth: Add support for s132/s140 v6, remove s132 v2/3/5
Support added for s132/s140 v6 in linker scripts and boards.
Support removed for s132 v2/3/5.

Download script updated to fetch new stacks and removed the
non-supported ones.

ble_drv.c updated to only handle s110 v8, and s132/s140 v6.

ubluepy updated to continue scanning after each individual scan
report reported to the module to keep old behaviour of the
Scanner class.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
db67a5000f nrf: Generalize feather52 target
This patch generalize the feather52 target to be a board without
an in-built Bluetooth stack or bootloader giving all flash memory to
micropython code.

This way the feather52 target can run any supported Bluetooth LE
stack the port supports for other nrf52832 targets. Hence, this
make Makefiles/linker scripts and BLE driver support easier
to maintain in the future.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
774638e2a9 nrf/boards/feather52: Move phony targets to main Makefile
dfu-gen .PHONY target is run unconditionally as first build
target when included, and might fail if the hex file is not
yet generated.

To prevent this, the dfu-gen and dfu-flash targets are moved
to the main Makefile and only exposed if feather52 is the
defined BOARD.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
03da4e33fb nrf/bluetooth: Fixes for s132 v5 BLE stack
Removing unused nrf52832_512k_64k_s132_5.0.0.ld.

Adding new linker script s132_5.0.0 following new
linker script scheme.

Updating ble_drv.c to handle de-increment of
outstanding tx packets on hvx for s132 v5.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
0f7da42c75 nrf/modules/random: Rename port config for RNG
Renaming config for enabling random module with hw
random number generator from MICROPY_PY_HW_RNG to
MICROPY_PY_RANDOM_HW_RNG to indicate which module it
is configuring.

Also, disabling the config by default in mpconfigport.h.

Adding the enable of RNG in all board configs.

Moving ifdef in modrandom, which test for the config being
set, earlier in the code. This is to prevent un-necessary
includes if not needed.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
f4382a2885 nrf/boards/wt51822_s4at: Fixes after nrfx and Pin IRQ introduction 2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
72aacef02e nrf/boards: Remove unused defines from board config headers 2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
6e8a605500 nrf/modules/machine/pin: Add support for IRQ on Pin's
This patch ads irq method to the pin object. Handlers
registered in the irq method will be kept as part of the
ROOT_POINTERS.

In order to resolve which pin object is the root of the
IRQ, the pin_find has been extended to also be able to
search up Pin objects based on mp_int_t pin number.
This also implies that the Pin.new API is now also supporting
creation of Pin objects based on the integer value of the
pin instead of old style mandating string name of the Pin.

All boards have been updated to use real pin number from
0-48 instead of pin_Pxx for UART/SPI and music module pins.

UART/SPI/modmusic has also been updated to use pin number
provided directly or look up the Pin object based on the
integer value of the pin (modmusic).

Pin generation has been updated to create a list of pins, where
the board/cpu dicts are now refering to an index in this list
instead of having one const declaration for each pin. This new
const table makes it possible to iterate through all pins generated
in order to locate the correct Pin object.
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
864f671744 nrf: Remove port member from Pin object
In order to be able to support GPIO1 port on nrf52840
the port has been removed from the Pin object.

All pins on port1 will now be incrementally on top of
the pin numbers for gpio0. Hence, Pin 1.00 will become
P32, and Pin 1.15 will become P47.

The modification is done to address the new gpio HAL
interface in nrfx, which resolves the port to be
configured base on a multiple of 32.

The patch also affects the existing devices which does
not have a second GPIO port in the way that the
port indication A and B is removed from Pin generation.
This means that the port which was earlier addressed
as PA0 is now P0, and PA31 is P31.

Also, this patch removes the gpio member which earlier
pointed to the perihperal GPIO base address. This is not
needed anymore, hence removed.
2018-07-18 17:12:26 +10:00
Ayke van Laethem
2de65dda22 nrf: Make linker scripts more modular.
With all the variation in chips and boards it's tedious to copy and
redefine linker scripts for every option. Making linker scripts more
modular also opens up more possibilities, like enabling/disabling the
flash file system from the Makefile - or even defining it's size from a
Makefile argument (FS_SIZE=12 for a 12kB filesystem if tight on space).
2018-07-18 17:12:26 +10:00
glennrub
002f7d1ad7 nrf: Replace custom-HAL with nrfx-HAL
Summarized this squashed PR replaces the hal/ folder in the port. This has been replaced the official
HAL layer from Nordic Semiconductor; https://github.com/NordicSemiconductor/nrfx.

A Git submodule has been added under lib/nrfx, for the nrfx dependency.

The drivers / modules has been updated to use this new HAL layer; nrfx at v1.0.0.

Also, header files and system files for nrf51/nrf52x chip variants has been deleted from the device/ folder, only keeping back the startup files written in C. All other files are now fetched from nrfx.

3 new header files in the ports/nrf/ folder has been added to configure nrfx (nrfx_config.h), logging (nrfx_log.h) and glue nrfx together with the drivers and modules from micropython (nrfx_glue.h).

The PR has been a joint effort from @aykevl (Ayke van Laethem) and @glennrub.

For reference, the commit log will be kept to get an overview of the changes done:

* ports/nrf: Initial commit for moving hal to Nordic Semiconductor BSD-3 licensed nrfx-hal.

* ports/nrf: Adding nrfx, Nordic Semiconductor BSD-3 hal layer, as git submodule checked out at lib/nrfx.

* ports/nrf/modules/machine/uart: Fixing bug which set hwfc to parity excluded, always resulting in no flow control, hence corrupted output. Also adding an extra loop on uart_tx_char to prevent any tx when any ongoing tx is in progress.

* ports/nrf/i2c: Moving I2C over to nrfx driver.

* ports/nrf/modules/machine/i2c: Alignment. Renaming print function param 'o' to 'self_in'

* ports/nrf/spi: Updating SPI machine module to use nrfx drivers.

* ports/nrf: Renaming modules/machine/rtc.c/.h to rtcounter.c/.h to not confuse the peripheral with Real-Time Clock:

* ports/nrf: Updating various files after renaming machine module RTC to RTCounter.

* ports/nrf: Renaming RTC to RTCounter in modmachine globals dict table. Also updating object type name to reflect new module name.

* ports/nrf: Fixing leftovers after renaming rtc to rtcounter.

* ports/nrf: Early untested adoption of nrfx_rtc in RTCounter. Untested.

* nrf/modules/machine/i2c: Improve keyword argument handling

* ports/nrf/modules/temp: Updating Temp machine module to use nrfx defined hal nrf_temp.h. Moving logic of BLE stack awareness to machine module.

* ports/nrf/boards/pca10040: Enable machine Temp module.

* nrf/modules/machine/rtcounter: Remove magic constants.

* ports/nrf: Adding base support for nrfx module logging. Adding option to disable logging of UART as it might log its own setup over UART while the peripheral is not yet set up. Logging of UART could make sense if other transport of log is used.

* ports/nrf: updating nrfx_log.h with more correct parenthisis on macro grouping.

* ports/nrf: Updating nrfx logging with configuration to disable logging of UART module. The pattern can be used to turn off other modules as well. However, for now UART is the only module locking itself by logging before the peripheral is configured. Logging is turned off by default, can be enabled in nrfx_config.h by setting NRFX_LOG_ENABLED=1.

* ports/nrf/modules/random: Updating modrandom to use nrfx hal for rng. Not using nrfx-driver for this peripheral as its blocking mode would do the trick on RNG. Moving softdevice aware code from legacy hal to modrandom.c.

* nrf: Enable Peripheral Resource Sharing.

This enables TWI and SPI to be enabled at the same time.

* nrf/Makefile: Define MCU sub variant (e.g. NRF51822/NRF51422)

* nrf: Port TIMER peripheral to nrfx HAL.

* nrf/modules/machine/uart: Optimize UART module

For a nRF51, this results in a size reduction of:
.text: -68 bytes
.data: -56 bytes

* nrf/modules/machine/uart: Don't use magic index numbers.

* nrf/modules/machine/uart: Fix off-by-one error.

For nrf51:
.text: -40 bytes

* nrf/modules/machine/rtcounter: Update for nrfx HAL.

* nrf/modules/machine/i2c: Reduce RAM consumption.

Reductions for the nrf51:
flash: -108 bytes
RAM:   -72 bytes

* nrf/mpconfigport: Avoid unnecessary root pointers.

This saves 92 bytes of RAM.

* nrf: Support SoftDevice with nrfx HAL.

* nrf: Add NVMC peripheral (microbitfs) support.

There is no support yet for a SoftDevice.

It also fixes a potentially serious bug in start_index generation.

* nrf/modules/machine/spi: Optimize SPI peripheral.

nrf51:
text: -340 bytes
data: -72  bytes

nrf52:
text: -352 bytes
data: -108 bytes

* nrf/modules/random: Forgot to commit header file.

* nrf: Make nrfx_config.h universal for all boards.

* nrf: Use SoftDevice API for flash access when built for SD

* nrf/drivers/bluetooth: Remove legacy HAL driver includes.

These were not used anymore so can be removed.

* ports/nrf/microbit: Port microbit targets to nrfx HAL

Initial port of microbit modules to use nrfx HAL layer.
Tested display/image and modmusic on micro:bit to verify that
softpwm and ticker for nrf51 is working as expected.

Changing IRQ priority on timer to priority 2, as 1 might collide if
used side by side of SD110 BLE stack.

The patch reserves Timer1 peripheral compile time. This is not ideal
and should be resolved in seperate task.

* nrf/boards/microbit: Remove custom nrfx_config.h from microbit target, adding disablement of timer1 if softpwm is enabled.

* nrf/adc: Update ADC module to use nrfx

* nrf/modules/machine/pwm: Updating machine PWM module to use nrfx HAL driver.

examples/nrf52_pwm.py and examples/nrf52_servo.py tested on pca10040.

* nrf: Removing hal folder and boards nrf5x_hal_conf.h headers.

* nrf/nrfx_glue: Adding direct NVIC access for S110 BLE stack

If SoftDevice s110 has not yet been initialized, the IRQ will not be forwarded to
the application using the sd_nvic* function calls. Hence, direct access to cmsi
nvic functions are used instead if SoftDevice is not enabled.

* nrf/drivers/ticker: Setting IRQ priority 3 on Timer1

SoftDevice fails to initilize if Timer1 has been configured to priority
level 2 before enabling the SD. The timer is set to priority 1, higher than BLE
stack in order to provide better quality of music rendering when used with the
music module. This might be too high, time will show.

* nrf/examples: Updating ubluepy_temp after moving RTCounter to nrfx.

* nrf: delete duplicate files from device folder which can be located in nrfx/mdk.

* nrf/Makefile: Fetch system files from nrfx.

Testing on each device sub-variant to figure out which system file to
use. Reason for this is that nrf52.c is actually defining nrf52832.

Removing NRF_DEFINES parameter setting the device in use into the
same sub-variant test, as NRF52 is unique to nrf52832 when using nrfx.
Without this exclusion of -DNRF52 in compilation for nrf52840, the
device will be interpreted as a nrf52, hence nrf52832.

Also, changing name on variable SRC_NRF_HAL to SRC_NRFX_HAL to
explicitly tell the origin of the file.

* nrf: Updating device #ifdefs to be more open to non-nrf51 targets.

* nrf/modules/machine/uart: Removing second instance of UART for nrf52840 as it only has one non-DMA variant.

* nrf/device: Removing system files as these are now used from nrfx/mdk

* nrf: Moving startup files in device one level up as there is no need for deep hierarchy.

* nrf: Use NRF52_SERIES defined in nrfx/mdk/nrf.h as define value when testing for both nrf52(832) and nrf52840 variants.

* nrf/modules/machine/uart: Enable UART RX by default

Enable rx by default after intiialization of the peripheral.
Else, the nrfx driver will re-enable rx for each byte read
on uart REPL, clearing the EVENT_RXDRDY before second byte,
which again will make second byte get lost and read will get stuck.

This happens if the bytes are transmitted nrf(51) while still
processing the previous byte. Not seen on nrf52, but should
also become an issue at higher speeds.

This patch sets rx to always be enabled. Hence, not clearing the event
between read bytes, and it will be able to detect next byte recieved
upon finishing the first.

* nrf/modules/machine/timer: Fixing defines excluding Timer1 if ticker/softpwm is used.

* nrf: Switching import form mpconfigboard.h to mpconfigport.h in nrfx_config.h as mpconfigboard.h might define default values for defines not set by board specific header.

* nrf/modules/machine/i2c: nrfx integration fixes

Increasing speed to 400K.

Returning Address NACK's as MP error code; MP_ENODEV.

Returning MP_ETIMEOUT on all other error codes from TWI nrfx driver
except the ANACK.

Enabling and disabling the TWI peripheral before and after each transaction.

* nrf/examples: Updating ssd1306_mod.py to split framebuffer transfer into multiple chunks

* nrf/modules/machine/i2c: Return MP_EIO error if Data NACK occurs.

* nrf: Addressing review comments.

* nrf: Updating git submodule and users to nrfx v1.0.0.

* nrf/modules/machine/adc: Update adc module to follow v1.0.0 nrfx API.

* nrf/modules/machine/spi: Implement init and deinit functions

Extending SPI objects with a config member such that
configuration can be kept between new() and init().

Moving initialization done in new() to common init
function shared between the module functions.

If SPI is already configured, the SPI peripheral will
be uninitialized before initalized again.

Adding logic to handle initialization of polarity and
phase. As well, updating default speed to 1M from 500K.

* nrf/modules/machine: Removing unused nrfx includes in machine module header files
2018-07-18 17:12:26 +10:00
Glenn Ruben Bakke
62931398d7 nrf/boards/microbit/modules: Initialize variable in microbit_sleep.
When compiling for microbit with LTO=0, a compiler error occurs due to
'ms' variable in the microbit_sleep function has not been initialized.

This patch initialize the variable to 0.
2018-07-18 17:12:25 +10:00
Ayke van Laethem
4231d4311f nrf: Fix stack size in ld script and enable MICROPY_STACK_CHECK.
The nrf51x22_256k_16k_s110_8.0.0.ld had a stack size of only 1kB, which
is way too low. Additionally, the indicated _minimum_stack_size (set at
2kB for that chip) isn't respected.

This commit sets the heap end based on the stack size (heap end = RAM
end - stack size) making it much easier to configure.

Additionally, the stack/heap size of nrf52 chips has been set to a more
sane value of 8kB.
2018-07-18 17:12:25 +10:00
Ayke van Laethem
987381dfa0 nrf: Make machine.UART optional.
Leave it enabled by default on all targets.

This is only possible when using UART-over-BLE (NUS) instead of the
default hardware peripheral. The flash area saved is quite substantial
(about 2.2KB) so this is useful for custom builds that do not need UART.
2018-07-18 17:12:25 +10:00
Ayke van Laethem
f907139fab nrf/boards/common.ld: Avoid overflowing the .text region.
Similar commit to this one:
6e56e6269f

When .text + .data oveflow available flash, the linker may not show an
error. This change makes sure .data is included in the size calculation.
2018-07-18 17:12:25 +10:00
glennrub
f8f14bf0c7 nrf: Add support for s132 v5.0.0 bluetooth stack (#139)
* ports/nrf/boards: Adding linker script for nrf52832 using BLE stack s132 v.5.0.0.

* ports/nrf/drivers/bluetooth: Updating makefile to add BLE_API_VERSION=4 if s132 v5.0.0 is used.

* ports/nrf/drivers/bluetooth: Updating BLE stack download script to also download S132 v5.0.0.

* ports/nrf/drivers/bluetooth: Updating ble_drv.c to handle BLE_API_VERSION=4 (s132 v5.0.0).

* ports/nrf/boards: Updating linker script for nrf52832 with s132 v.5.0.0 bluetooth stack.

* ports/nrf/drivers/bluetooth: Removing commented out code in ble_drv.c

* ports/nrf/drivers/bluetooth: Updating define of GATT_MTU_SIZE_DEFAULT for SD132v5 to be defined using the new name defined in the SD headers in a more generic way.

* ports/nrf/drivers/bluetooth: Cleaning up use of BLE_API_VERSION in the ble_drv.c. Also considering s140v6 API, so not all has been changed to >= if API version 3 and 4 in combo is used. New s140v6 will differ on these, and add a new API not compatible with the API for 3 and 4.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke
c8fd71612b nrf/boards/microbit: Enable music, display, image, microbit module.
Enabled by default on microbit targets, with or without BLE stack.  Also
enable softpwm to make display and music module compile.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke
6062d46170 nrf: Change board module header from board_modules.h to boardmodules.h.
Applicable for targets with board specific modules.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke
0d7976deb2 nrf/boards/microbit: Update docs on top level tick low pri callback. 2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke
1128aacb69 nrf/boards/microbit: Add temperature back to microbit module.
Increases size by 68 bytes.  Should be considered to be removed as temp
module is already providing this functionality.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke
b6d01a7dd1 nrf/boards/microbit/modules: Fix tabbing in modmicrobit.c. 2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke
5601fc9397 nrf/boards/microbit: Move microbit target to custom linker script.
To use if BLE stack is enabled.  The custom linker script also set off
space enough to compile in microbitfs+hal_nvmc.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke
789f8f1c4b nrf/boards/microbit: Update to work with new ticker code.
- Rename microbit_module_init to board_module_init0 which is the generic
  board module init function.
- Add low priority callback registration of display tick handler in the
  module init function.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke
d76982e382 nrf/boards/microbit: Include modmicrobit.h in board_modules.h.
So that users of the board module can find the init function of the module
implicitly.
2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke
0b504575e2 nrf/boards/microbit: Add modmicrobit.h to expose module init function. 2018-07-18 17:12:25 +10:00
Glenn Ruben Bakke
1b241be310 nrf/boards/microbit: Attempt to get working display/images without FP.
And update the API to align with new unary/binary function callback
structures.
2018-07-18 17:12:25 +10:00