Commit Graph

14 Commits

Author SHA1 Message Date
Damien George
a03e6c1e05 stm32/irq: Define IRQ priorities directly as encoded hardware values.
For a given IRQn (eg UART) there's no need to carry around both a PRI and
SUBPRI value (eg IRQ_PRI_UART, IRQ_SUBPRI_UART).  Instead, the IRQ_PRI_UART
value has been changed in this patch to be the encoded hardware value,
using NVIC_EncodePriority.  This way the NVIC_SetPriority function can be
used directly, instead of going through HAL_NVIC_SetPriority which must do
extra processing to encode the PRI+SUBPRI.

For a priority grouping of 4 (4 bits for preempt priority, 0 bits for the
sub-priority), which is used in the stm32 port, the IRQ_PRI_xxx constants
remain unchanged in their value.

This patch also "fixes" the use of raise_irq_pri() which should be passed
the encoded value (but as mentioned above the unencoded value is the same
as the encoded value for priority grouping 4, so there was no bug from this
error).
2018-05-02 14:41:02 +10:00
Damien George
a7ebac2eae stm32/can: Allow CAN pins to be configured per board.
This patch allows a given board to configure which pins are used for the
CAN peripherals, in a similar way to all the other bus peripherals (I2C,
UART, SPI).  To enable CAN on a board the mpconfigboard.h file should
define (for example):

    #define MICROPY_HW_CAN1_TX (pin_B9)
    #define MICROPY_HW_CAN1_RX (pin_B8)
    #define MICROPY_HW_CAN2_TX (pin_B13)
    #define MICROPY_HW_CAN2_RX (pin_B12)

And the board config file should no longer define MICROPY_HW_ENABLE_CAN.
2018-04-11 16:35:24 +10:00
Damien George
0abbafd424 stm32/can: Add "list" param to CAN.recv() to receive data inplace.
This API matches (as close as possible) how other pyb classes allow inplace
operations, such as pyb.SPI.recv(buf).
2018-03-19 15:12:24 +11:00
Damien George
06aa13c350 stm32/can: Use explicit byte extraction instead of casting to word ptr.
Casting the Data array to a uint32_t* leads to strict aliasing errors on
older gcc compilers.
2018-03-16 23:52:13 +11:00
Damien George
a25e6c6b65 stm32/can: Add CAN.info() method to retrieve error and tx/rx buf info. 2018-03-16 18:28:35 +11:00
Damien George
d7e67fb1b4 stm32/can: Add CAN.state() method to get the state of the controller.
This is useful for monitoring errors on the bus and knowing when a restart
is needed.
2018-03-16 17:10:41 +11:00
Damien George
1272c3c65d stm32/can: Add CAN.restart() method so controller can leave bus-off. 2018-03-15 17:29:30 +11:00
Damien George
823ca03008 stm32/can: Add "auto_restart" option to constructor and init() method. 2018-03-15 17:17:33 +11:00
Damien George
1608c4f5be stm32/can: Use enums to index keyword arguments, for clarity. 2018-03-15 17:15:41 +11:00
Damien George
2036196d71 stm32/can: Improve can.recv() so it checks for events, eg ctrl-C.
This patch provides a custom (and simple) function to receive data on the
CAN bus, instead of the HAL function.  This custom version calls
mp_handle_pending() while waiting for messages, which, among other things,
allows to interrupt the recv() method via KeyboardInterrupt.
2018-03-15 16:34:07 +11:00
Damien George
3eb0694b97 stm32: Update HAL macro and constant names to use newer versions.
Newer versions of the HAL use names which are cleaner and more
self-consistent amongst the HAL itself.  This patch switches to use those
names in most places so it is easier to update the HAL in the future.
2018-02-13 15:37:35 +11:00
Damien George
4e35d10829 stm32/can: Support MCUs without a CAN2 peripheral. 2018-02-01 13:11:02 +11:00
Damien George
a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Damien George
01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00