Commit Graph

10203 Commits

Author SHA1 Message Date
Damien George
823b31e528 stm32/boards/NUCLEO_F429ZI: Enable lwIP and Ethernet peripheral. 2019-02-26 23:32:19 +11:00
Damien George
ed0a530614 stm32/boards/STM32F769DISC: Enable lwIP and Ethernet peripheral. 2019-02-26 23:32:19 +11:00
Damien George
b3513f54d3 stm32/boards/STM32F7DISC: Enable lwIP and Ethernet peripheral. 2019-02-26 23:32:19 +11:00
Damien George
8daec24168 stm32/boards/NUCLEO_F767ZI: Enable lwIP and Ethernet peripheral. 2019-02-26 23:32:19 +11:00
Damien George
ac3e2f380d stm32/modnetwork: Don't call NIC callback if it's NULL. 2019-02-26 23:32:19 +11:00
Damien George
08a24c5f41 stm32/mpconfigport.h: Enable lwIP concurrency protection mechanism. 2019-02-26 23:32:19 +11:00
Damien George
c55709bf29 stm32/network_lan: Add high-level network.LAN interface to ETH driver. 2019-02-26 23:32:19 +11:00
Damien George
c950a1a35d stm32/eth: Add low-level Ethernet MAC driver. 2019-02-26 23:32:19 +11:00
Damien George
b6791ffbbe lib/netutils: Add function to print tracing info for Ethernet frames. 2019-02-26 23:32:19 +11:00
Damien George
39ea132e1d extmod/modlwip: Add concurrency protection macros.
Some users of this module may require the LwIP stack to run at an elevated
priority, to protect against concurrency issues with processing done by the
underlying network interface.  Since LwIP doesn't provide such protection
it must be done here (the other option is to run LwIP in a separate thread,
and use thread protection mechanisms, but that is a more heavyweight
solution).
2019-02-26 23:32:19 +11:00
Damien George
cc63e19332 stm32/mphalport: Add mp_hal_get_mac() helper function. 2019-02-26 23:32:07 +11:00
Damien George
75a35448e1 stm32/boards/NUCLEO_F767ZI: Fix up comments about HCLK computation. 2019-02-26 22:44:27 +11:00
Yonatan Goldschmidt
9521399044 docs/uos: Document extra requirements on stream objs passed to dupterm.
This is only correct for the extmod/uos_dupterm.c implementation however,
as e.g cc3200 implementation does the mp_load_method() itself, and anyway
requires `read` instead of `readinto`.
2019-02-26 01:12:37 +11:00
Petr Kracík
21f9329d5d esp32/modnetwork: Fix wifi.isconnected to return False after disconnect.
esp_wifi_connect will return ESP_OK for the normal path of execution which
just means the reconnect is started, not that it is actually reconnected.
In such a case wifi.isconnected() should return False until the
reconnection is complete.  After reconnect a GOT_IP event is called and it
will change wifi_sta_connected back to True.
2019-02-26 00:49:40 +11:00
Damien George
55ff562c70 unix/modffi: Eliminate unused-argument warning when debugging disabled. 2019-02-25 14:53:17 +11:00
Damien George
4ee2c2a4cd py: Eliminate warnings about unused arguments when debugging disabled. 2019-02-25 14:52:36 +11:00
Petr Kracík
5801a003f0 esp32/network_lan: Make power arg to constructor optional.
A value of None for this argument is already supported, so the argument can
be made optional.
2019-02-21 23:29:10 +11:00
Petr Kracík
01c1432e32 esp32/modnetwork: Catch and report Ethernet events. 2019-02-21 23:28:51 +11:00
Petr Kracík
7d8c71c222 esp32/network_lan: Add arg to constructor to set clock mode for ETH PHY.
This optional parameter for network.LAN clock_mode can be used for cases
where the clock source is different from the default GPIO0.  Fixes #4502.
2019-02-21 23:28:17 +11:00
Damien George
be41d6d6f9 tests/basics: Add tests for try-except-else and try-except-else-finally. 2019-02-21 16:22:41 +11:00
Stig Bjørlykke
c72391c4ce nrf/pwm: Remove superfluous NULL in machine_hard_pwm_instances.
Remove unneeded NULL entry in machine_hard_pwm_instances[] when not
building for NRF52_SERIES.
2019-02-20 22:52:18 +01:00
Stig Bjørlykke
6ca03fe8bd nrf/readme: Update make flash command when defining board.
Update the "make flash" command sample to include BOARD parameter
when building for a specific target board.
2019-02-20 22:34:08 +01:00
Glenn Ruben Bakke
ca2bb66127 nrf/bluetooth: Resolve compilation warning in ble_drv.c.
This patch makes sure that the char_data.props is first
assigned a value before other flags are OR'd in.
Resolves compilation warning on possible unitialized variable.
2019-02-20 07:25:51 +01:00
Glenn Ruben Bakke
0c6f5bc529 nrf/bluetooth: Improve advertisment behavior for nrf52 targets.
This patch makes sure that advertisment data is located in
persistent static RAM memory throughout the advertisment.

Also, setting m_adv_handle to predifined
BLE_GAP_ADV_SET_HANDLE_NOT_SET value to indicate first time
usage of the handle. Upon first advertisment configuration
this will be populated with a handle value returned by the
stack (s132/s140).
2019-02-20 07:25:51 +01:00
Glenn Ruben Bakke
ee3a01f25c nrf/readme: Update link to nrfjprog download.
After new layout of nordicsemi.com the direct links to
command line tools (nrfjprog) has changed to become dynamic.
This patch removes the old direct links to each specific OS
variant and is replaced with one single link to the download
landing page instead.
2019-02-20 07:13:36 +01:00
Andrew Leech
8ed4a28dae stm32/sdram: Increase GPIO speed for SDRAM interface to "very high".
Currently all usages of mp_hal_pin_config_alt_static() set the pin speed to
"high" (50Mhz).  The SDRAM interface typically runs much faster than this
so should be set to the maximum pin speed.

This commit adds mp_hal_pin_config_alt_static_speed() which allows setting
the pin speed along with the other alternate function details.
2019-02-20 16:54:32 +11:00
Damien George
7bc71f5446 py/objfun: Make fun_data arg of mp_obj_new_fun_asm() a const pointer. 2019-02-20 13:14:03 +11:00
Damien George
bf352047de py/obj.h: Remove obsolete mp_obj_new_fun_viper() declaration. 2019-02-20 13:06:35 +11:00
Damien George
2b575418b6 py/qstr: Evaluate find_qstr only once then pass to Q_GET_HASH macro.
Q_GET_HASH may evaluate its argument more than once.
2019-02-19 23:44:01 +11:00
Dave Hylands
a270cf280b stm32/stm32_it: Fix RTC IRQ handler to handle all EXTI IRQs on F0 MCUs. 2019-02-19 15:17:47 +11:00
Dave Hylands
67b326d97e stm32/extint: Remove unused (and incorrect) EXTI defines. 2019-02-19 15:17:32 +11:00
Dave Hylands
3d17d9b578 stm32/extint: Add non-GPIO EXTI IRQ sources for F0. 2019-02-19 15:17:28 +11:00
Dave Hylands
92fec603d0 stm32/make-stmconst.py: Improve regex to parse more constants.
A few RTC constants weren't being parsed properly due to whitespace
differences, and this patch makes certain whitespace optional.  Changes
made:

- allow for no space between /*!< and EXTI, eg for:
  __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */

- allow for no space between semicolon and start of comment, eg for:
  __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */
2019-02-19 15:17:28 +11:00
Dave Hylands
9441f4b682 stm32/extint: Fix RTC Alarm/FS USB EXTI constants for L4. 2019-02-19 15:17:28 +11:00
Dave Hylands
363900be5d stm32/extint: Fix ExtInt to work with non-GPIO pins. 2019-02-19 15:17:20 +11:00
Damien George
303f27f656 esp32/modsocket: Change socket.socket to be socket type rather than fun.
To make all ports consistent.  Addresses issue #4514.
2019-02-18 23:20:13 +11:00
Damien George
42c0e440b9 extmod/modlwip: Fix bug when polling listening socket with backlog=1.
The bug polling for readability was: if alloc==0 and tcp.item==NULL then
the code would incorrectly check tcp.array[iget] which is an invalid
dereference when alloc==0.  This patch refactors the code to use a helper
function lwip_socket_incoming_array() to return the correct pointer for the
incomming connection array.

Fixes issue #4511.
2019-02-18 14:23:35 +11:00
Damien George
c65e5c88b8 stm32/boards/stm32f429.ld: Increase uPy heap size by 64k for F429 MCU.
The F429 has 256k total RAM, with 64k already set aside for flash write
cache, so the uPy heap can be increased this much.
2019-02-18 13:18:59 +11:00
Damien George
ed09e13943 esp32/modsocket: Fix usocket.send to accept anything with buffer proto. 2019-02-18 12:38:38 +11:00
Damien George
7ef9482b8a extmod/modlwip: Change #ifdef to #if for check of MICROPY_PY_LWIP.
Otherwise this code will be included if MICROPY_PY_LWIP is defined to 0.
2019-02-15 16:07:24 +11:00
Damien George
c551169bd8 stm32/mboot: Add hook to run board-specific code early on startup. 2019-02-15 15:34:05 +11:00
Damien George
65b1fefa31 stm32/modmachine: Add ability to pass through user data to mboot. 2019-02-15 15:10:04 +11:00
Damien George
3669198403 stm32/mboot: Add support script which can program mboot and application. 2019-02-15 15:09:59 +11:00
Damien George
3d0c31e60e stm32/mboot: Move some BSS vars to new section that isn't zeroed out.
Zeroing out data on startup takes time and is not necessary for certain
variables.  So provide a declaration for such variables and use it.
2019-02-15 15:09:54 +11:00
Damien George
ff04b78ffd stm32/mboot: Add support for loading gzip'd firmware from a filesystem.
This adds support to mboot to load and program application firmware from
a .dfu.gz file on the board's filesystem.  See mboot/README.md for details.
2019-02-15 15:09:48 +11:00
Andrew Leech
4daee31706 stm32/qspi: Use static af functions for pin configuration.
This allows qspi pin configuration to work on any supported platform.
2019-02-14 13:42:08 +11:00
Damien George
be4e5b1f87 stm32/mboot/mphalport.h: Include genhdr/pins.h for access to pin names.
So that mboot configuration can use names like pyb_pin_X1.
2019-02-14 13:39:13 +11:00
Damien George
f38397ba8d stm32/mboot/Makefile: Generate all pin header files from board pins.csv. 2019-02-14 13:36:32 +11:00
Damien George
7b2dc96251 stm32/boards/make-pins.py: Add cmdline options to support use by mboot. 2019-02-14 13:35:39 +11:00
Yonatan Goldschmidt
bc4f8b438b extmod/moduwebsocket: Refactor websocket to uwebsocket.
As mentioned in #4450, `websocket` was experimental with a single intended
user, `webrepl`. Therefore, we'll make this change without a weak
link `websocket` -> `uwebsocket`.
2019-02-14 00:35:45 +11:00