Commit Graph

1048 Commits

Author SHA1 Message Date
iabdalkader
66115a3744 stm32/eth: Fix eth_link_status function to use correct BSR bit.
Fixes #7346.
2021-06-13 12:29:11 +10:00
iabdalkader
51614ce365 stm32/eth: Add low-power mode configuration option.
Add low power functionality configurable with:

    lan.config(low_power=True/False)
2021-06-13 12:27:33 +10:00
Damien George
61f91de361 stm32/sdram: Prevent array-bounds warnings with GCC 11.
Signed-off-by: Damien George <damien@micropython.org>
2021-06-10 22:48:54 +10:00
Damien George
cf849d84b9 stm32/boards: Enable MICROPY_HW_SPIFLASH_ENABLE_CACHE on VCC_GND boards.
Because these boards use the SPI flash cache in their bdev.c configuration.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-10 22:48:17 +10:00
Damien George
71e3538a32 stm32/usb: Add USB_VCP.irq method, to set a callback on USB data RX.
Usage:

    usb = pyb.USB_VCP()
    usb.irq(lambda u:print(u, u.read()), usb.IRQ_RX)

Signed-off-by: Damien George <damien@micropython.org>
2021-06-10 15:26:21 +10:00
Damien George
211c3e41f1 stm32/boards/PYBD_SF2: Disable GCC 11 warnings for array bounds.
With GCC 11 there is now a warning about array bounds of OTP-mac, due to
the OTP being a literal address.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-27 23:57:51 +10:00
Damien George
62f75376dd stm32/boards/NUCLEO_L432KC: Fix FS size and enable LFS1 filesystem.
Signed-off-by: Damien George <damien@micropython.org>
2021-05-27 12:18:41 +10:00
Damien George
ea81bcf1c0 stm32/mboot: Leave bootloader from thread mode, not from IRQ.
Leaving the bootloader from an IRQ (eg USB or I2C IRQ) will not work if
MBOOT_LEAVE_BOOTLOADER_VIA_RESET is disabled, ie if mboot jumps directly to
the application.  This is because the CPU will still be in IRQ state when
the application starts and IRQs of lower priority will be blocked.

Fix this by setting a flag when the bootloader should finish, and exit the
bootloader always from the main (top level) thread.

This also improves the USB behaviour of mboot: it no longer abruptly
disconnects when the manifest command is sent.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-21 00:46:01 +10:00
Damien George
748339b281 stm32/uart: Configure pull-up only on RX and CTS, not TX and RTS.
RX and CTS are the input pins and pull-ups are enabled so they don't cause
a problem if left unconnected.  But the output pins don't need a pull up
(they were originally all configured with pull up in commit
8f7491a109).

If needed, the pull-ups can be disabled in Python using machine.Pin after
the UART is constructed.

See issue #4369.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-21 00:38:04 +10:00
Damien George
a96afae90f stm32/sdio: Fix case of SDIO DMA turning off mid transfer.
The DMA driver will turn off DMA if it hasn't been used for an amount of
time (to save power).  The SDIO driver for cyw43 WLAN was not informing the
DMA driver that it was using DMA and there was a chance that the DMA would
turn off in the middle of an SDIO DMA transfer.  The symptoms of this would
be printing of SDIO error messages and a failure to communicate with the
cyw43 WLAN module.

This commit fixes this issue by changing the SDIO driver to use the
dma_nohal_XXX API to initialise and start the DMA.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-21 00:08:13 +10:00
Mike Causer
47b778332a all: Replace busses with buses.
"buses" is the widely accepted plural form of "bus".
2021-05-20 23:22:03 +10:00
Mike Causer
1ca66efbf7 stm32/boards: Add VCC_GND_F407ZG board. 2021-05-20 23:17:51 +10:00
Mike Causer
c24003abec stm32/boards: Add VCC_GND_F407VE board. 2021-05-20 23:15:56 +10:00
Damien George
9a0bca2c2a stm32/mboot: Make LEDs and reset-mode selection more configurable.
A board can now customise mboot with:
- MBOOT_LED1, MBOOT_LED2, MBOOT_LED3, MBOOT_LED4: if it needs to have
  different LEDs for mboot compared to the application
- MBOOT_BOARD_LED_INIT: if it needs a fully customised LED init function
- MBOOT_BOARD_LED_STATE: if it needs a fully customised LED state-setting
  function
- MBOOT_BOARD_GET_RESET_MODE: if it needs a fully customised function to
  get the reset mode

With full customisation, the only requirement is a single LED to show the
status of the bootloader (idle, erasing, flashing, etc), which can be
configured to do nothing if needed.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-12 13:44:57 +10:00
Damien George
6639e282c7 stm32/mboot: Add MBOOT_LEAVE_BOOTLOADER_VIA_RESET option.
It is enabled by default to get the standard behaviour of doing a reset
after it is finished, but can be disabled by a board to jump straight to
the application (likely the board needs to use MBOOT_BOARD_CLEANUP to make
this work).

The application is passed a reset mode of BOARDCTRL_RESET_MODE_BOOTLOADER
if the bootloader was active and entered via a jump.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-12 13:44:52 +10:00
Damien George
9ee116c452 stm32/boardctrl: Adjust logic for running boot.py, main.py.
This new logic is equivalent to the old logic when the only possibilities
for reset_mode are NORMAL, SAFE_MODE and FILESYSTEM, which is the standard
case.  But the new logic also allows other reset_mode values (eg
BOOTLOADER) to run boot.py and main.py.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-12 13:44:47 +10:00
Damien George
ee4ffc1804 stm32/powerctrl: Add MICROPY_HW_ENTER_BOOTLOADER_VIA_RESET option.
When disabled the bootloader is entered via a direct jump.  When enabled
the bootloader is entered via a system reset then a jump.  It's enabled by
default to retain the existing behaviour, which is the recommended way.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-12 13:44:41 +10:00
David Lechner
ca0c75f504 stm32/boards: Change default LSI_VALUE to 32000 for F4 MCUs.
In the STM32 HAL libraries, the default value for LSI_VALUE for F4 MCUs is
32 kHz.

Signed-off-by: David Lechner <david@pybricks.com>
2021-05-04 16:53:40 +10:00
Damien George
e9e9c76ddf all: Rename mp_keyboard_interrupt to mp_sched_keyboard_interrupt.
To match mp_sched_exception() and mp_sched_schedule().

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:13:43 +10:00
iabdalkader
a1111b83ed stm32/sdio: Allow configuring the SDMMC periph used for SDIO.
This can now be selected by setting MICROPY_HW_SDIO_SDMMC, which defaults
to 1, ie SDMMC1.  The pins can also be selected and default to the standard
C8/C9/C10/C11/C12/D2.
2021-04-30 11:26:04 +10:00
iabdalkader
baa712b7f0 stm32/boards/PYBD_SF2: Enable RF switch compile option. 2021-04-30 10:16:15 +10:00
iabdalkader
80788154b3 stm32/sdio: Add functions to re/enable SDIO/SDIOIT. 2021-04-30 01:12:08 +10:00
iabdalkader
4d96786823 stm32/uart: Enable HW flow control for UART 1/5/7/8. 2021-04-30 01:10:02 +10:00
Damien George
cf7e71fa43 stm32/sdcard: Allow configuring the SDMMC periph used for SD/MMC card.
This can now be selected by setting MICROPY_HW_SDCARD_SDMMC, which defaults
to 1, ie SDMMC1.  This commit also renames the SD pin configuration macros
from MICROPY_HW_SDMMC2_xxx to MICROPY_HW_SDCARD_xxx, as well as renaming
MICROPY_HW_SDMMC_BUS_WIDTH to MICROPY_HW_SDCARD_BUS_WIDTH.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:58:17 +10:00
Damien George
37494b8c8a stm32/mboot: Allow mboot to be placed at any location in flash.
A board can now define MBOOT_TEXT0_ADDR to place mboot at a location other
than 0x08000000.  This can be useful if, for example, there is already a
different bootloader on the device.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:42:59 +10:00
Damien George
58be5a5aa3 stm32/mboot: Allow a board to customise the linker scripts.
A board can now define MBOOT_LD_FILES (at the Makefile-level) to specify
custom linker scripts.  And stm32_generic.ld has been split into 2 pieces
so one or the other can be reused (usually stm32_sections.ld wolud be
reused by a board, and stm32_memory.ld redefined).

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:42:59 +10:00
Damien George
97f09fda3e stm32/mboot: Fix mp_hal_delay_us() and add mp_hal_ticks_ms().
Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:42:59 +10:00
Damien George
fd01b6c779 stm32/adc: Allow mboot to use basic ADC functions.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:42:59 +10:00
Damien George
ef2896bdea stm32/mboot: Allow a board to add source files to the build.
A board can now use BUILDING_MBOOT at the Makefile-level to do things
conditional on building mboot, for example add source files to SRC_C.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:42:59 +10:00
Damien George
885b246ca9 stm32/boardctrl: Show first reset-mode state on LEDs when selecting.
Commit 1e297c8898 introduced a bug where the
very first reset-mode state on the LEDs was not shown, because prior to
that commit the first reset-mode state was the same as the initial LED
state (green on, others off) and update_reset_mode() was called after
setting this initial LED state.

This is fixed in this commit by changing the update_reset_mode() loop so
that it displays the current reset mode before doing the delay.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:32:12 +10:00
Damien George
a72b8443ca stm32/boardctrl: Add constants for reset mode values.
And use the same boardctrl.h header for both the application and mboot so
these constants are consistent.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:31:35 +10:00
Damien George
647fa63f9c stm32/softtimer: Support static soft timer instances.
This adds support for making static (ie not on the Python GC heap) soft
timers.  This can be useful for a board to define a custom background
handler, or eventually for BLE/network processing to use instead of systick
slots; it will be more efficient using soft timer for this.

The main issue with using the existing code for static soft timers is that
it would combine heap allocated and statically allocated soft_timer_entry_t
instances in the same pairing-heap data structure.  This would prevent the
GC from tracing some of the heap allocated entries (because the GC won't
follow pointers outside the heap).

This commit makes it so that soft timer entries are explicitly marked,
instead of relying on implicit marking by having the root of the pairing
heap in the root pointer section.  Also, on soft reset only the heap-
allocated soft timers are deleted from the pairing heap, leaving the
statically allocated ones.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-29 16:54:35 +10:00
Damien George
89b64478c7 stm32/softtimer: Add support for having a C-based callback.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-29 16:54:35 +10:00
iabdalkader
a708848b0c stm32/uart: Fix H7 UART clock source configuration.
Previously to this commit, Usart16ClockSelection was overwritten and
Usart234578ClockSelection was not set.
2021-04-28 00:46:48 +10:00
plan-do-break-fix
4dc802400f stm32,teensy: Correct typos in project README files. 2021-04-28 00:29:18 +10:00
David Michieli
5669a60954 stm32/mboot: Allow unpacking dfu without secret key.
- unpack-dfu command no longer requies a secret key to be present
- pack-dfu command raises an exception if no secret key is found
2021-04-23 11:04:37 +10:00
Damien George
00d6a79b3d stm32/machine_timer: Improve usability of Timer constructor and init.
Improvements are:
- Default period is 1000ms with callback disabled.
- if period is not specified then it's not updated (previously, if period
  was not specified then it was set to -1 and running the timer callback as
  fast as possible, making the REPL unresponsive).
- Use uint64_t to compute delta_ms, and raise a ValueError if the period is
  too large.
- If callback is not specified then it's not updated.
- Specifying None for the callback will disable the timer.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-21 14:22:09 +10:00
Damien George
6e0f9b9262 stm32/boards/pllvalues.py: Support wider range of PLL values for F413.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-20 23:33:33 +10:00
8bitgeek
fc6ea28d00 stm32/sdram: Make MICROPY_HW_FMC_BA1,MICROPY_HW_FMC_A11 optional pins.
This supports SDRAM having only 2 internal banks (using BA0 only), and only
11 (A0-A10) bits of address, such as IS42S16100H (512K x 16bit x 2bank).
2021-04-14 11:06:32 +10:00
Damien George
2ac09c2694 stm32/uart: Use LL_USART_GetBaudRate to compute baudrate.
This function includes the UART prescaler in the calculation (if it has
one, eg on H7 and WB MCUs).

Signed-off-by: Damien George <damien@micropython.org>
2021-04-13 23:59:01 +10:00
Damien George
25c029ce9f stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs.
So these alternate functions can be parsed by the build scripts and used in
application code.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-13 23:58:20 +10:00
Damien George
2668337f36 stm32/rfcore: Intercept addr-resolution HCI cmd to work around BLE bug.
The STM32WB has a problem when address resolution is enabled: under certain
conditions the MCU can get into a state where it draws an additional 10mA
or so and eventually ends up with a broken BLE RX path in the silicon.  A
simple way to reproduce this is to enable address resolution (which is the
default for NimBLE) and start the device advertising.  If there is enough
BLE activity in the vicinity then the device will at some point enter the
bad state and, if left long enough, will have permanent BLE RX damage.

STMicroelectronics are aware of this issue.  The only known workaround at
this stage is to not enable address resolution, which is implemented by
this commit.

Work done in collaboration with Jim Mussared aka @jimmo.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-12 21:51:11 +10:00
Damien George
dd62c52a36 stm32/rfcore: Fix race condition with C2 accessing free buffer list.
Prior to this commit, if C2 was busy (eg lots of BLE activity) then it may
not have had time to respond to the notification on the IPCC_CH_MM channel
by the time additional memory was available to put on that buffer.  In such
a case C1 would modify the free buffer list while C2 was potentially
accessing it, and this would eventually lead to lost memory buffers (or a
corrupt linked list).  If all buffers become lost then ACL packets
(asynchronous events) can no longer be delivered from C2 to C1.

This commit fixes this issue by waiting for C2 to indicate that it has
finished using the free buffer list.

Work done in collaboration with Jim Mussared aka @jimmo.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-12 21:43:04 +10:00
aziubin
7546d3cf73 stm32/boards/NUCLEO_L476RG: Add 5 remaining UARTs.
STM32L476RG MCU of NUCLEO_L476RG board has 6 UART/USART units in total
(USART1, USART2, USART3, UART4, UART5 and LPUART1), but only UART2,
connected to REPL, was defined and available in Python code.
Defined are all 5 remaining UART/USART units including LPUART1.

Signed-off-by: Alexander Ziubin aziubin@googlemail.com
2021-04-09 15:00:55 +10:00
Damien George
7b41d7f187 stm32/boardctrl: Give boards control over execution of boot.py,main.py.
This commit simplifies the customisation of the main MicroPython execution
loop (4 macros are reduced to 2), and allows a board to have full control
over the execution (or not) of boot.py and main.py.

For boards that use the default start-up code, there is no functional
change in this commit.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-09 12:44:19 +10:00
Damien George
4d9e657f0e stm32/mpconfigport.h: Add support for a board to specify root pointers.
A board can now define MICROPY_BOARD_ROOT_POINTERS to specify any custom
root pointers.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-08 17:00:26 +10:00
Damien George
cb396827f5 stm32/boards/pllvalues.py: Relax PLLQ constraints on STM32F413 MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-07 12:47:21 +10:00
Damien George
f4340b7e62 stm32/powerctrl: Support using PLLI2C on STM32F413 as USB clock source.
So SYSCLK can run at more varied frequencies, eg 100MHz.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-07 12:47:21 +10:00
Damien George
00963a4e69 stm32/powerctrl: Allow a board to configure AHB and APB clock dividers.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-07 12:47:09 +10:00
Damien George
25ae169e6e stm32: Include .ARM section in firmware for C++ exception handling.
Support for C++ was added in 97960dc7de but
that commit didn't include the C++ exception handling table in the binary
firmware image.  This commit fixes that.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-06 12:11:15 +10:00