Commit Graph

27 Commits

Author SHA1 Message Date
Daniel Campora
7c1c9af5d4 cc3200: Code clean-up on pybpin. 2015-07-02 16:29:51 +02:00
Daniel Campora
813b581127 cc3200: Add Pin.name() method. 2015-06-28 14:14:22 +02:00
Daniel Campora
2abb58d758 cc3200: Rename Pin.get_config() to Pin.info(). 2015-05-28 13:10:46 +02:00
Daniel Campora
fabe79f7af cc3200: Clean up exception handling. 2015-05-26 12:29:20 +02:00
Daniel Campora
c27dc38e85 cc3200: Re-name 'intmode' to 'mode' in the callback API. 2015-05-17 14:49:17 +02:00
Daniel Campora
cd3f2523f1 cc3200: Disable WLAN.urn() by default.
Can be enabled by defining MICROPY_PORT_WLAN_URN=1 in mpconfigport.h.
2015-05-17 14:20:24 +02:00
Daniel Campora
a379b6ed11 cc3200: Add optional timeout param to WLAN.connect(). 2015-05-17 14:05:44 +02:00
Daniel Campora
fb9e4cf463 cc3200: Make sure to handle all pending pin interrupts.
When entering the interrupt handler of a given GPIO port, more than
one pin could have pending interrupts, therefore care must be taken
to service each interrupt one by one before leaving.
2015-05-17 13:42:15 +02:00
Daniel Campora
8e611e8414 cc3200: Add Timer module. Supports free running, PWM and capture modes. 2015-05-17 12:34:49 +02:00
Daniel Campora
8c8d7f3c60 cc3200: Clean up pyb.Pin
Remove unused and unneeded functions, also create Pin.get_config() that
returns the whole configuration of the pin.

This reduces code size by ~500 bytes.
2015-05-03 11:26:56 +02:00
Daniel Campora
c1a77a0c9f cc3200: Use new %q format to print qstr's where appropiate. 2015-04-17 10:15:55 +02:00
Damien George
7f9d1d6ab9 py: Overhaul and simplify printf/pfenv mechanism.
Previous to this patch the printing mechanism was a bit of a tangled
mess.  This patch attempts to consolidate printing into one interface.

All (non-debug) printing now uses the mp_print* family of functions,
mainly mp_printf.  All these functions take an mp_print_t structure as
their first argument, and this structure defines the printing backend
through the "print_strn" function of said structure.

Printing from the uPy core can reach the platform-defined print code via
two paths: either through mp_sys_stdout_obj (defined pert port) in
conjunction with mp_stream_write; or through the mp_plat_print structure
which uses the MP_PLAT_PRINT_STRN macro to define how string are printed
on the platform.  The former is only used when MICROPY_PY_IO is defined.

With this new scheme printing is generally more efficient (less layers
to go through, less arguments to pass), and, given an mp_print_t*
structure, one can call mp_print_str for efficiency instead of
mp_printf("%s", ...).  Code size is also reduced by around 200 bytes on
Thumb2 archs.
2015-04-16 14:30:16 +00:00
Daniel Campora
4be44014ab cc3200: Reenable active interrupts when waking from suspended mode. 2015-03-26 13:58:58 +01:00
Daniel Campora
2d717ad97a cc3200: Add callback support to the UART for RX interrupts. 2015-03-26 10:28:43 +01:00
danicampora
0e96d1b3f1 cc3200: Add parameter to wlan_stop() for custom timeout values. 2015-03-18 21:55:08 +01:00
danicampora
005a7f4190 cc3200: Fix extint_enable behaviour when the callback is updated. 2015-03-17 13:26:09 +01:00
danicampora
98b8568362 cc3200: Assign GPIO10 and GPIO11 to the GPIO peripheral on start-up. 2015-03-17 13:26:05 +01:00
danicampora
b2cb75efb7 cc3200: Remove double administration of callback objects. 2015-03-16 00:42:09 +01:00
danicampora
04749e677f cc3200: Allow separate selection of the power mode in Pin callbacks. 2015-03-12 16:22:17 +01:00
danicampora
9e44383e3f cc3200: Add power management framework. Add mpcallback class.
Supports suspend and hibernate modes. Waking is possible throug GPIO
and WLAN.
The mpcallback class is generic and can be reused by other classes.
2015-03-11 17:00:33 +01:00
danicampora
73aee8da54 cc3200: Merge ExtInt class into Pin class.
Also add another method to change the pin's interrupt mode
on the fly.
2015-03-11 17:00:28 +01:00
danicampora
d226dd2f59 cc3200: Add preliminary low power deep sleep support. 2015-03-11 16:54:09 +01:00
Damien George
4a23a01945 cc3200: Add explicit py/ path-prefix for py includes.
This is how it should be, so one knows exactly where the includes are
coming from.
2015-02-21 18:58:43 +00:00
danicampora
c020109cfa cc3200: Add SD module and disable SD card support for the LAUNCHXL. 2015-02-21 14:19:40 +01:00
danicampora
868fa82ea4 cc3200: Add ADC module. 2015-02-20 16:40:59 +01:00
danicampora
99f3f6b5de cc3200: Add I2C module. Only master mode is currently supported. 2015-02-13 17:54:04 +01:00
danicampora
53716fcc3e cc3200: Rename GPIO module to Pin.
This change helps making the cc3200 port API a bit closer to stmhal.
The ramaining differences are due to the specific hardware details
of each chip. One feature that has been deliberately disabled is the
possibility to add custom names and custom pin mappings. Those
features are nice and convenient, but in this port, code size is a
major concern.
2015-02-09 20:01:54 +01:00