Commit Graph

39 Commits

Author SHA1 Message Date
Damien George
0f408bc1ff stmhal: Move PY_SYS_PLATFORM config from board to general config file.
It can be overridden by a board if needed.
2016-12-13 16:26:45 +11:00
Rami Ali
27a503f632 stmhal: Refactor UART configuration to use pin objects.
This follows the pattern of other peripherals (I2C, SPI) to specify the
pins using pin objects instead of a pair of GPIO port and pin number.  It
makes it easier to customise the UART pins for a particular board.
2016-12-05 14:26:41 +11:00
Krzysztof Blazewicz
7928b3e347 stmhal/boards: configure all F4 boards to work with new HAL
changes include:
* use single GPIO.BSRR instead of BSRRH and BSRRL
* change HSE_STARTUP_TIMEOUT to 100 ms
* define LSE_STARTUP_TIMEOUT to 5 s
2016-11-16 12:43:27 +01:00
Damien George
b4cc68e4a4 stmhal/led: Refactor LED to use mp_hal_pin_output() init function.
As part of this patch the MICROPY_HW_LED_OTYPE setting is removed because
it is now unused (all boards anyway had this as OUTPUT_PP).
2016-10-18 14:43:05 +11:00
Damien George
1dc2862a83 stmhal/led: Allow LEDs to be in PWM mode with TIM1 and channels 1-4.
This allows PYBv3 to use PWM for LED(1) and LED(2).
2016-05-13 11:01:21 +01:00
Pavol Rusnak
ce3beb1672 stmhal: Unify comments in stm32f4xx_hal_conf.h across all boards.
To make it easier to spot differences.
2016-03-07 11:28:36 +00:00
Paul Sokolovsky
97a0846af9 stmhal/diskio: Introduce MICROPY_HW_HAS_FLASH setting.
To allow to reuse stmhal/diskio for ports which don't have flash but have
other storage devices.
2016-02-06 15:07:01 +02:00
Damien George
a8a4b01af6 stmhal: Add PWM capability for LED(3) and LED(4) on pyboards.
USB CDC no longer needs TIM3 (which was originally used for LED(4) PWM)
and so TIM3 has been freed for general purpose use by the user.  Hence
LED(4) lost its PWM capabilities.

This patch reinstates the PWM capabilities using a semi-generic piece
of code which allows to configure a timer and PWM channel to use for any
LED.  But the PWM capability is only configured if the LED is set to an
intensity between 1 and 254 (ie only when needed).  In that case the
relevant timer is configured for PWM.  It's up to the user to make sure
the timers are not used if PWM is active.

This patch also makes sure that PWM LEDs are turned off using standard
GPIO when calling led.off() or led.intensity(0), instead of just setting
the PWM counter to zero.
2016-01-29 22:44:43 +00:00
Damien George
f7c4f9a640 stmhal: For SPI config, use HW_SPIx_SCK instead of HW_ENABLE_SPIx.
Previously, SPI was configured by a board defining MICROPY_HW_ENABLE_SPIx
to 0 or 1.  Now, the board should define MICROPY_HW_SPIx_SCK, MISO, MOSI
and NSS.  This makes it the same as how I2C is configured.
2015-12-12 15:02:02 +00:00
neilh10
1be0fde45c stmhal: Enable two USB phys to be supported together.
This is refactoring to enable support for the two USB PHYs available on
some STM32F4 processors to be used at the same time. The F405/7 & F429
have two USB PHYs, others such as the F411 only have one PHY.

This has been tested separately on a pyb10 (USB_FS PHY) and F429DISC
(USB_HS PHY) to be able to invoke a REPL/USB.  I have modified a PYBV10
to support two PHYs.

The long term objective is to support a 2nd USB PHY to be brought up as a
USB HOST, and possibly a single USB PHY to be OTG.
2015-12-09 09:56:36 +00:00
T S
86aa16bea6 stmhal: Implement delayed RTC initialization with LSI fallback.
If RTC is already running at boot then it's left alone.  Otherwise, RTC is
started at boot but startup function returns straight away.  RTC startup
is then finished the first time it is used.  Fallback to LSI if LSE fails
to start in a certain time.

Also included:
 MICROPY_HW_CLK_LAST_FREQ
        hold pyb.freq() parameters in RTC backup reg
 MICROPY_HW_RTC_USE_US
        option to present datetime sub-seconds in microseconds
 MICROPY_HW_RTC_USE_CALOUT
        option to enable RTC calibration output

CLK_LAST_FREQ and RTC_USE_CALOUT are enabled for PYBv1.0.
2015-11-23 23:23:07 +00:00
Damien George
6f70283909 stmhal: Make accel AVDD pin configurable via mpconfigboard.h. 2015-10-29 22:40:42 +00:00
Dave Hylands
872f9af6ae stmhal: Use CMSIS_MCU definition from mpconfigboard.mk
This needs to land afte #1407 lands, since #1407 is where
the CMSIS_MCU was defined.
2015-08-07 08:54:14 +01:00
Dave Hylands
be66a9ecf6 stmhal: Generate modstm constants per build
This causes unnecessary constants to no longer be generated.
Some constants (like UART_BRR) are different between the F4 and F7
2015-08-07 08:46:43 +01:00
Damien George
a39df51d8a stmhal: Update Makefile and board configs to compile with relocated hal. 2015-07-20 12:30:18 +01:00
Damien George
70446f46c2 stmhal: Allow to name SPI busses, and give them names for pyboard. 2015-05-27 17:21:42 +01:00
Damien George
0e6f5e08e1 stmhal: Allow to name I2C busses, and give them names for pyboard. 2015-05-27 17:16:26 +01:00
Damien George
1775b65e07 stmhal: Remove PYBVxx defines and use config vars for UART/CAN names.
Now all stmhal-based boards can name their peripherals (if they want) to
any string.
2015-05-27 16:51:04 +01:00
Eero af Heurlin
2378be4e93 stmhal: Allow to configure UART pins completely via mpconfigboard.h. 2015-05-03 13:48:26 +01:00
Damien George
0435e76250 stmhal: Make ld and af files configurable within Makefile.
Each board now needs an mpconfigboard.mk file which defines AF_FILE and
LD_FILE.

Also moved stm32f405.ld to boards/ directory to keep things organised.
2015-04-18 21:40:59 +01:00
Damien George
d15fe5a6b3 stmhal: Make I2C busses and their pins configurable in mpconfigboard.h. 2015-04-18 21:40:59 +01:00
Damien George
2e5704d101 stmhal: Make a HW config option for LED4 being controlled by PWM. 2015-04-18 21:40:58 +01:00
Damien George
8bdbc20e74 stmhal: Make HSE PLL parameters configurable per board. 2015-04-18 21:40:58 +01:00
Damien George
cfe623ae3e stmhal: Expose all PYBv1.0 pins, include SD and USB pins.
To have proper low power mode, need to configure all unused pins in
input mode, so need to have them available.
2015-03-22 17:57:09 +00:00
Damien George
49fe6dc89a stmhal: Add config option to use LSE/LSI for RTC.
Most boards (except the pyboard) don't have a 32kHz crystal so they
should use the LSI for the RTC.
2015-03-16 22:54:44 +00:00
Dave Hylands
d7f199465f stmhal: Add support for FEZ Cerb40 II board from ghielectronics.com. 2015-01-21 00:11:04 +00:00
Damien George
131185a2b8 stmhal: Add MICROPY_HW_USB_OTG_ID_PIN config, set for relevant boards.
This config option is for the USB OTG pin, pin A10.  This is used on
some boards but not others.  Eg PYBv3 uses PA10 for LED(2), so it
shouldn't be used for OTG ID (actually PA10 is multiplexed on this
board, but defaults to LED(2)).

Partially addresses issue #1059.
2015-01-12 16:13:29 +00:00
Damien George
181bfb6db2 stmhal: Add MICROPY_HW_USB_VBUS_DETECT_PIN option, for boards without it
Since all currently supported boards use pin A9 for this function, the
value of the macro MICROPY_HW_USB_VBUS_DETECT_PIN is not actually used,
just the fact that it is defined.

Addresses issue #1048.
2015-01-07 23:54:57 +00:00
Damien George
efa04eafd3 stmhal: Add MMA_INT/PB2 to available pins on PYBV10.
This allows you to register ExtInt on the MMA interrupt pin.
2014-10-22 19:31:27 +01:00
Damien George
6dba992182 stmhal: Add config option to disable/enable CAN driver. 2014-10-05 18:05:26 +01:00
Damien George
b766e79510 stmhal: Initial implementation of cc3k module and driver.
Pulled in and modified work done by mux/iabdalkader on cc3k driver, from
iabdalkader-cc3k-update branch.  That branch was terribly messy and had
too many conflicts to merge neatly.
2014-09-26 00:57:26 +01:00
Damien George
0c64c634ca stmhal: Add sys.platform string to PYBv1.0 (it's "pyboard"). 2014-08-10 17:49:52 +01:00
Damien George
3ef911345c stmhal: Update STM32Cube F4 HAL driver to V1.3.0.
This patch updates ST's HAL to the latest version, V1.3.0, dated 19 June
2014.  Files were copied verbatim from the ST package.  Only change was
to suppress compiler warning of unused variables in 4 places.

A lot of the changes from ST are cosmetic: comments and white space.
Some small code changes here and there, and addition of F411 header.

Main code change is how SysTick interrupt is set: it now has a
configuration variable to set the priority, so we no longer need to work
around this (originall in system_stm32f4xx.c).
2014-08-06 22:33:31 +01:00
mux
a75e382a9b Change MCU name config micro 2014-06-27 00:35:53 +02:00
mux
fe81eea967 Add MICROPY_HW_MICRO_NAME to boards config 2014-06-19 14:40:57 +02:00
Damien George
ae8feac598 stmhal: Wrap CC3000 driver in MICROPY_HW_ENABLE_CC3K.
This renames MICROPY_HW_HAS_WLAN to MICROPY_HW_ENABLE_CC3K (since it's a
driver, not a board feature) and wraps all CC3000 code in this #if.
It's disabled for all boards.
2014-05-03 17:32:55 +01:00
Damien George
4ae52d454c stmhal: Reinstate CC3000 driver from old stm/ port.
It's not enabled by default because it doesn't fully work.  It can
connect to an AP, get an IP address and do a host-lookup, but not yet do
send or recv on a socket.
2014-04-30 20:47:50 +01:00
Damien George
ff91156d34 stmhal: Improved configurability for I2C and SPI busses.
The HAL handles for the I2C/SPI objects are rather large, so we don't
want to unnecessarily include them.
2014-04-20 19:06:15 +01:00
Damien George
09d207785c stmhal: Unify naming of HW config; make SD detect configurable.
All board config macros now begin with MICROPY_HW_.

Renamed PYBv10 to PYBV10, since macros should be all uppercase.

Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD
detect pin can be easily configured.
2014-03-30 12:30:35 +01:00