Commit Graph

54 Commits

Author SHA1 Message Date
Jan Staal
9e2423e730 stm32: Add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn.
This commit is based upon prior work of @dpgeorge and @koendv.

MCU support for the STM32H7A3 and B3 families MCUs:
- STM32H7A3xx
- STM32H7A3xxQ (SMPS)
- STM32H7B3xx
- STM32H7B3xxQ (SMPS)

Support has been added for the STM32H7B3I_DK board.

Signed-off-by: Jan Staal <info@janstaal.com>
2021-09-16 12:29:28 +10:00
Jan Hrudka
d451dc0086 stm32: Add basic support for STM32H750. 2021-09-15 10:42:20 +10:00
Damien George
86ef965352 stm32/adc: Simplify and generalise how pin_adcX table is defined.
The ADC_FIRST_GPIO_CHANNEL and ADC_LAST_GPIO_CHANNEL macros are no longer
needed.  Instead the pin_adcX table (X = 1, 2, 3) is now generated to be
the exact size needed for a given MCU, and MP_ARRAY_SIZE(pin_adcX) is used
to determine the upper bound.

This commit also allows CPU pins to be excluded from ADC configuration if
they are hidden by prefixing their name with a "-".

Signed-off-by: Damien George <damien@micropython.org>
2021-07-05 16:03:11 +10:00
iabdalkader
0e11966ce9 stm32/adc: Define the ADC instance used for internal channels. 2021-07-02 23:33:51 +10:00
iabdalkader
ff7be31f26 stm32/adc: Allow using ADC12 and ADC3 for H7.
* Modify common functions in adc.c to accept ADC handle.
* Most external channels are connected to ADC12 which is used by default.
* For ADCAll (internal channels) ADC3 is used instead.
* Issue #4435 is possibly related (at least partially fixed).
2021-07-02 23:33:51 +10:00
Damien George
80883a82c0 stm32/adc: Deselect VBAT after reading to prevent battery drain.
Signed-off-by: Damien George <damien@micropython.org>
2020-12-18 13:32:02 +11:00
Damien George
5210fc51ec stm32/adc: Add support to pyb.ADC for STM32WB MCUs. 2020-06-02 10:48:49 +10:00
Thomas Roberts
d7399679de stm32: Add support for F412 MCUs. 2020-05-15 10:08:30 +10:00
stijn
bcf01d1686 all: Fix implicit conversion from double to float.
These are found when building with -Wfloat-conversion.
2020-04-18 22:42:24 +10:00
Jim Mussared
def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Damien George
1a3e386c67 all: Remove spaces inside and around parenthesis.
Using new options enabled in the uncrustify configuration.
2020-03-28 23:36:44 +11:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George
ad7213d3c3 py: Add mp_raise_msg_varg helper and use it where appropriate.
This commit adds mp_raise_msg_varg(type, fmt, ...) as a helper for
nlr_raise(mp_obj_new_exception_msg_varg(type, fmt, ...)).  It makes the
C-level API for raising exceptions more consistent, and reduces code size
on most ports:

   bare-arm:   +28 +0.042%
minimal x86:  +100 +0.067%
   unix x64:   -56 -0.011%
unix nanbox:  -300 -0.068%
      stm32:  -204 -0.054% PYBV10
     cc3200:    +0 +0.000%
    esp8266:   -64 -0.010% GENERIC
      esp32:  -104 -0.007% GENERIC
        nrf:  -136 -0.094% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-02-13 11:52:40 +11:00
iabdalkader
6e4468a2ab stm32/adc: Fix sampling for internal channels on H7 MCUs.
Set to 810 cycles following HAL examples.
2019-10-15 22:08:45 +11:00
iabdalkader
4cee42d864 stm32/adc: Use IS_CHANNEL_INTERNAL macro to check for internal channels. 2019-10-15 22:08:36 +11:00
iabdalkader
d523a377d1 stm32/adc: Remove unused macro and channel check, and fix spacing.
The call to is_adcx_channel is redundant because the channel is already
checked just before calling adc_init_single in adc_make_new.
2019-10-15 22:04:19 +11:00
iabdalkader
cb2b210d45 stm32/adc: Update ADC driver to work with the new H7 HAL.
Use NB_TO_CHANNEL to map decimal numbers to channel numbers.  And use the
correct rank to initialize channels (ADC_REGULAR_RANK_1).
2019-10-15 22:03:54 +11:00
Chris Mason
0096041c99 stm32/{adc,machine_adc}: Change ADC clock and sampling time for F0 MCUs.
STM32F0 has PCLK=48MHz and maximum ADC clock is 14MHz so use PCLK/4=12MHz
to stay within spec of the ADC peripheral.  In pyb.ADC set common sampling
time to approx 4uS for internal and external sources.  In machine.ADC
reduce sample time to approx 1uS for external source, leave internal at
maximum sampling time.
2019-10-04 21:39:17 +10:00
Chris Mason
64181b5f76 stm32: Add support for STM32L452 MCUs. 2019-07-08 16:50:19 +10:00
Damien George
73e8b7e0e4 stm32: Update components to work with new H7xx HAL. 2019-07-03 23:40:49 +10:00
Damien George
1f63e9b701 stm32/adc: Fix VBAT_DIV to be 4 for STM32F411.
Fixes issue #4794.
2019-05-20 14:37:28 +10:00
Chris Mason
1b956ec817 stm32: Add support for F413 MCUs.
Includes:
- Support for CAN3.
- Support for UART9 and UART10.
- stm32f413xg.ld and stm32f413xh.ld linker scripts.
- stm32f413_af.csv alternate function mapping.
- startup_stm32f413xx.s because F413 has different interrupt vector table.
- Memory configuration with: 240K filesystem, 240K heap, 16K stack.
2019-05-02 16:26:53 +10:00
Damien George
6e30f96b0b ports: Convert legacy uppercase macro names to lowercase. 2019-02-12 14:54:51 +11:00
Damien George
43a894fb48 stm32/adc: Add basic support for ADC on a pin on STM32H7 MCUs. 2019-02-06 13:35:28 +11:00
Damien George
1db55381b6 stm32/adc: Support 16-bit ADC configuration on H7 MCUs. 2018-12-12 12:51:46 +11:00
Damien George
6cab8daee0 stm32/adc: Increase ADC sampling time for internal sources on H7 MCUs. 2018-12-12 12:51:26 +11:00
Damien George
0555ada277 stm32/adc: Fix calibrated volt/temp readings on H7 by using 16bit scale. 2018-12-12 12:50:37 +11:00
boochow
9d3372bded stm32: Add peripheral support for STM32L432.
The L432 does not have: GPIOD, TIM3, SPI2, ADC dual mode operation, 2-banks
flash.
2018-12-06 13:32:43 +11:00
Tobias Badertscher
9acc32b40f stm32/adc: Add ADC auto-calibration for L4 MCUs.
This increases the precision of the ADC.
2018-11-26 16:16:29 +11:00
Damien George
cb3c66e793 stm32/adc: Increase sample time for internal sensors on L4 MCUs.
They need time (around 4us for VREFINT) to obtain accurate results.

Fixes issue #4022.
2018-09-20 23:51:33 +10:00
Damien George
3220cedc31 stm32/adc: Fix ADC calibration scale for L4 MCUs, they use 3.0V. 2018-09-20 23:50:54 +10:00
Andrew Leech
17f7c683d2 stm32: Add support for STM32F765xx MCUs.
This part is functionally similar to STM32F767xx (they share a datasheet)
so support is generally comparable.  When adding board support the
stm32f767_af.csv and stm32f767.ld should be used.
2018-09-20 15:16:03 +10:00
Damien George
7be5bb3672 stm32/adc: Fix ADC reading on F0 MCUs to only sample a single channel.
And increase sampling time to get better results for internal channels.
2018-08-04 13:33:02 +10:00
Damien George
c62b23094f stm32/adc: Disable VBAT in read channel helper function.
Prior to this patch, if VBAT was read via ADC.read() or
ADCAll.read_channel(), then it would remain enabled and subsequent reads
of TEMPSENSOR or VREFINT would not work.  This patch makes sure that VBAT
is disabled for all cases that it could be read.
2018-08-04 13:25:43 +10:00
Damien George
e1ae9939ac stm32: Support compiling with object representation D.
With this and previous patches the stm32 port can now be compiled using
object representation D (nan boxing).  Note that native code and frozen mpy
files with float constants are currently not supported with this object
representation.
2018-07-08 23:25:11 +10:00
Damien George
ea7e747979 stm32: Add support for STM32F0 MCUs. 2018-05-28 21:49:49 +10:00
Tobias Badertscher
708cdb6276 stm32: Add support for STM32L496 MCU. 2018-05-18 22:37:30 +10:00
Damien George
cb3456ddfe stm32: Don't use %lu or %lx for formatting, use just %u or %x.
On this 32-bit arch there's no need to use the long version of the format
specifier.  It's only there to appease the compiler which checks the type
of the args passed to printf.  Removing the "l" saves a bit of code space.
2018-05-04 15:52:03 +10:00
Damien George
d4f8414ebd stm32/adc: Use mp_hal_pin_config() instead of HAL_GPIO_Init().
This makes ADCAll work correctly on L4 MCUs.
2018-05-02 12:17:45 +10:00
iabdalkader
8c12f1d916 stm32/adc: Add support for H7 MCU series.
ADC3 is used because the H7's internal ADC channels are connected to ADC3
and the uPy driver doesn't support more than one ADC.

Only 12-bit resolution is supported because 12 is hard-coded and 14/16 bits
are not recommended on some ADC3 pins (see errata).

Values from internal ADC channels are known to give wrong values at
present.
2018-05-01 15:36:11 +10:00
Damien George
f1073e747d stm32/adc: Factor common ADC init code into adcx_init_periph().
The only configuration that changes with this patch is that on L4 MCUs the
clock prescaler changed from ADC_CLOCK_ASYNC_DIV2 to ADC_CLOCK_ASYNC_DIV1
for the ADCAll object.  This should be ok.
2018-04-11 14:46:13 +10:00
Damien George
1d6c155d6a stm32/adc: Fix config of EOC selection and Ext-Trig for ADC periph.
A value of DISABLE for EOCSelection is invalid.  This would have been
interpreted instead as ADC_EOC_SEQ_CONV, but really it should be
ADC_EOC_SINGLE_CONV for the uses in this code.  So this has been fixed.

ExternalTrigConv should be ADC_SOFTWARE_START because all ADC
conversions are started by software.  This is now fixed.
2018-04-11 14:29:37 +10:00
Damien George
06807c1bde stm32/adc: Factor code to optimise adc_read_channel and adc_read.
Saves 200 bytes of code space.
2018-04-11 14:28:06 +10:00
Damien George
aebd9701a7 stm32/adc: Optimise read_timed_multi() by caching buffer pointers. 2018-04-11 14:09:09 +10:00
Peter Hinch
4f40fa5cf4 stm32/adc: Add read_timed_multi() static method, with docs and tests. 2018-04-11 13:36:17 +10:00
Damien George
de9528d12c stm32/adc: Fix verification of ADC channel 16 for F411 MCUs. 2018-04-11 13:16:54 +10:00
Damien George
6b51eb22c8 stm32: Consolidate include of genhdr/pins.h to single location in pin.h.
genhdr/pins.h is an internal header file that defines all of the pin
objects and it's cleaner to have pin.h include it (where the struct's for
these objects are defined) rather than an explicit include by every user.
2018-03-27 20:25:24 +11:00
Damien George
e37b8ba5a5 stm32: Use STM32xx macros instead of MCU_SERIES_xx to select MCU type.
The CMSIS files for the STM32 range provide macros to distinguish between
the different MCU series: STM32F4, STM32F7, STM32H7, STM32L4, etc.  Prefer
to use these instead of custom ones.
2018-03-17 10:42:50 +11:00
Damien George
60b0982bb2 stm32: Add board config option to enable/disable the ADC.
The new option is MICROPY_HW_ENABLE_ADC and is enabled by default.
2018-02-22 14:22:45 +11:00
Damien George
3eb0694b97 stm32: Update HAL macro and constant names to use newer versions.
Newer versions of the HAL use names which are cleaner and more
self-consistent amongst the HAL itself.  This patch switches to use those
names in most places so it is easier to update the HAL in the future.
2018-02-13 15:37:35 +11:00