Commit Graph

14 Commits

Author SHA1 Message Date
Daniel Campora
a3acaa000c cc3200: Add antenna selection feature to WLAN. 2015-06-07 00:06:27 +02:00
Daniel Campora
d07de2d307 cc3200: Move the STDIO UART pin configuration to mpconfigboard.h. 2015-05-27 09:45:29 +02:00
Daniel Campora
2dd47239de cc3200: Make API more similar to stmhal.
In general the changes are:

1. Peripheral (UART, SPI, ADC, I2C, Timer) IDs start from 1, not zero.
2. Make I2C and SPI require the ID even when there's only one bus.
3. Make I2C and SPI accept 'mode' parameter even though only MASTER
   is supported.
2015-05-25 21:47:19 +02:00
Daniel Campora
f81684141e cc3200: Implement os.uname() to get details of the OS and hardware. 2015-04-29 00:03:56 +02:00
Daniel Campora
b9d850227d cc3200: Add WLAN AP specific settings for each board. 2015-04-04 22:09:55 +02:00
Daniel Campora
d460a30711 cc3200: Add specific version file for the CC3200 port.
Current version has been numbered as 0.9.0 since Timers/PWM support
is still missing.
2015-03-31 14:34:09 +02:00
Daniel Campora
2d717ad97a cc3200: Add callback support to the UART for RX interrupts. 2015-03-26 10:28:43 +01:00
Daniel Campora
26d230419c cc3200: Add GPIO25 to the pins list of the WiPy and the WiPy-SD.
This allows to properly initialize the system led and add it
to the sleep module so that it can be restored when resuming
from suspended mode.
2015-03-25 15:22:32 +01:00
danicampora
5dd8ae6b9c cc3200: Fix spaces aligment in LAUNCHXL/mpconfigboard.h 2015-03-16 00:42:13 +01:00
danicampora
9e44383e3f cc3200: Add power management framework. Add mpcallback class.
Supports suspend and hibernate modes. Waking is possible throug GPIO
and WLAN.
The mpcallback class is generic and can be reused by other classes.
2015-03-11 17:00:33 +01:00
danicampora
7a074a14ce cc3200: Implement safe boot pin and system led behaviour.
The safe boot pin, when pulled high during reset rolls back the
firmware to the "factory" image and skips execution of 'boot.py'
and 'main.py'. This is useful to recover from a crash condition.
The system led is used mostly to signal errors.
2015-02-25 23:17:17 +01:00
danicampora
c020109cfa cc3200: Add SD module and disable SD card support for the LAUNCHXL. 2015-02-21 14:19:40 +01:00
danicampora
6b21c3fdd6 cc3200: Refactor UART and I2C object creation.
I2C objects can be freed by the GC and a __del__ method is provided
in order to de-init the peripheral prior to being garbage collected.
UART objects are now added to a local list and this list is now part
of the VM_STATE.
2015-02-20 16:41:55 +01:00
danicampora
8785645a95 cc3200: Add cc3200 port of MicroPython.
The port currently implements support for GPIO, RTC, ExtInt and the WiFi
subsystem. A small file system is available in the serial flash. A
bootloader which makes OTA updates possible, is also part of this initial
implementation.
2015-02-06 22:10:11 +00:00