Commit Graph

51 Commits

Author SHA1 Message Date
Damien George
b1229efbd1 all: Fix spelling mistakes based on codespell check.
Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 18:03:06 +10:00
David Grayson
c046b23ea2 shared/runtime/pyexec: Don't allow Ctrl+C to interrupt frozen boot code.
Helps prevent the filesystem from getting formatted by mistake, among other
things.  For example, on a Pico board, entering Ctrl+D and Ctrl+C fast many
times will eventually wipe the filesystem (without warning or notice).

Further rationale: Ctrl+C is used a lot by automation scripts (eg mpremote)
and UI's (eg Mu, Thonny) to get the board into a known state.  If the board
is not responding for a short time then it's not possible to know if it's
just a slow start up (eg in _boot.py), or an infinite loop in the main
application.  The former should not be interrupted, but the latter should.
The only way to distinguish these two cases would be to wait "long enough",
and if there's nothing on the serial after "long enough" then assume it's
running the application and Ctrl+C should break out of it.  But defining
"long enough" is impossible for all the different boards and their possible
behaviour.  The solution in this commit is to make it so that frozen
start-up code cannot be interrupted by Ctrl+C.  That code then effectively
acts like normal C start-up code, which also cannot be interrupted.

Note: on the stm32 port this was never seen as an issue because all
start-up code is in C.  But now other ports start to put more things in
_boot.py and so this problem crops up.

Signed-off-by: David Grayson <davidegrayson@gmail.com>
2023-04-05 10:38:50 +10:00
Damien George
b3c8ab37ec py/gc: Make gc_dump_info/gc_dump_alloc_table take a printer as argument.
So that callers can redirect the output if needed.

Signed-off-by: Damien George <damien@micropython.org>
2023-03-10 10:58:10 +11:00
manobendro
294098d28e minimal: Increase heap size for Linux builds.
Otherwise use of the REPL is quite limited.

Fixes issue #10644.
2023-02-20 10:44:14 +11:00
Jan Willeke
043dc4dd0c minimal/Makefile: Set linker to $(CC).
Changed 'LD = gcc' too 'LD = $(CC)' to support other compilers.

Signed-off-by: Jan Willeke <willeke@smartmote.de>
2022-11-15 17:09:37 +11:00
Jim Mussared
d6d8722558 extmod: Make extmod.mk self-contained.
This makes it so that all a port needs to do is set the relevant variables
and "include extmod.mk" and doesn't need to worry about adding anything to
OBJ, CFLAGS, SRC_QSTR, etc.

Make all extmod variables (src, flags, etc) private to extmod.mk.

Also move common/shared, extmod-related fragments (e.g. wiznet, cyw43,
bluetooth) into extmod.mk.

Now that SRC_MOD, CFLAGS_MOD, CXXFLAGS_MOD are unused by both extmod.mk
(and user-C-modules in a previous commit), remove all uses of them from
port makefiles.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:31:49 +11:00
Jim Mussared
17f2783e4a all: Use += rather than = everywhere for CFLAGS/LDFLAGS/LIBS.
This avoids a surprise where an = can cancel out an earlier +=.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:17:41 +11:00
Jim Mussared
6ecdf1a240 tests/frozen: Move frozentest.mpy from ports/ to tests/.
frozentest.mpy was previously duplicated in ports/minimal and
ports/powerpc.

This needs to be re-generated on every .mpy version increase, so might as
well just have a single copy of it.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 23:51:10 +10:00
Daniel Jour
9c6fd974f7 minimal/Makefile: Avoid terminal reset, use BUILD variable.
stty can provide the current terminal settings, so that they can be
stored in a shell variable and restored after running the firmware. This
avoids the complete "blanking" of the terminal, and thus also removes the
need for the sleep call.

The run target now references the firmware file using the BUILD variable
instead of using the hard coded "build/" path.
2022-08-11 14:07:18 +10:00
Angus Gratton
fdfe4eca74 ports: Always include debug information in the ELF.
For bare metal ARM & xtensa targets, passing -g will make the ELF file
larger but doesn't change the binary size.  However, this means tools like
gdb, addr2line, etc can extract source-level information from the ELF.

Also standardise -ggdb to -g, these produce the exact same ELF file on
arm-none-eabi-gcc and will use DWARF format for all these ports.
2022-07-29 11:24:00 +10:00
David Lechner
68f46342aa shared/runtime/pyexec: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register repl_line
instead of using a conditional inside of mp_state_vm_t.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:52:01 +10:00
David Lechner
81dbea1ce3 shared/readline: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register the readline_history root
pointer array used by shared/readline.c and removes the registration from
all mpconfigport.h files.

This also required adding a new MICROPY_READLINE_HISTORY_SIZE config option
since not all ports used the same sized array.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:49 +10:00
Damien George
6e71cde6aa ports: Use default VFS config for import_stat and builtin_open.
For ports with MICROPY_VFS and MICROPY_PY_IO enabled their configuration
can now be simplified to use the defaults for mp_import_stat and
mp_builtin_open.

This commit makes no functional change, except for the following minor
points:
- the built-in "open" is removed from the minimal port (it previously did
  nothing)
- the duplicate built-in "input" is removed from the esp32 port
- qemu-arm now delegates to VFS import/open

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Damien George
5956466c0e py/builtin: Clean up and simplify import_stat and builtin_open config.
The following changes are made:

- If MICROPY_VFS is enabled then mp_vfs_import_stat and mp_vfs_open are
  automatically used for mp_import_stat and mp_builtin_open respectively.

- If MICROPY_PY_IO is enabled then "open" is automatically included in the
  set of builtins, and points to mp_builtin_open_obj.

This helps to clean up and simplify the most common port configuration.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Damien George
24894f9065 ports: Recompile bytecode tests now that .mpy format changed.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-14 23:52:14 +10:00
Damien George
c0f2af4e86 ports: Recompile bytecode tests now that .mpy format changed.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-24 18:29:02 +11:00
Damien George
fa873ce67c minimal/mpconfigport.h: Disable features that are not needed.
Now that there are feature levels, and that this port uses
MICROPY_CONFIG_ROM_LEVEL_MINIMUM, it's easy to see what optional features
can be disabled.  And this commit disables them.

Signed-off-by: Damien George <damien@micropython.org>
2021-11-05 13:12:18 +11:00
Jim Mussared
c9c55032dc minimal/Makefile: Don't force a 32-bit build.
Word-size specific configuration is now done automatically, so it no longer
requires this to match the ARM configuration.

Also it's less common to have 32-bit compilation support installed, so this
will make it work "out of the box" for more people.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-11-04 15:59:20 +11:00
Jim Mussared
910e060f93 minimal/mpconfigport.h: Use MICROPY_CONFIG_ROM_LEVEL_MINIMUM.
Update minimal port to use the new "minimal" rom level config (this is a
no-op change, the binary is the same size and contains the exact same
symbols).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-09-16 13:24:33 +10:00
Damien George
14b853eae0 minimal/Makefile: Add support for building with user C modules.
Fixes issue #5750.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-23 12:02:03 +10:00
Damien George
136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Damien George
2c5993c59e ports: Disable MICROPY_PY_ASSIGN_EXPR in bare-arm and minimal ports.
To keep these ports as minimal as possible.
2020-06-16 22:06:21 +10:00
Damien George
8e591d412a minimal: Make build more flexible and work as 64-bit build.
Changes are:
- string0 is no longer built when building for host as the target, because
  it'll be provided by the system libc and may in some cases clash with the
  system one (eg on OSX).
- mp_int_t/mp_uint_t are defined in terms of intptr_t/uintptr_t to support
  both 32-bit and 64-bit builds.
- Configuration values which are the default in py/mpconfig.h are removed
  from mpconfigport.h to make the configuration a bit more minimal, eg as
  a better starting point for new ports.
2020-06-02 15:43:44 +10:00
stijn
84fa3312cf all: Format code to add space after C++-style comment start.
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
2020-04-23 11:24:25 +10:00
stijn
30840ebc99 all: Enable extra conversion warnings where applicable.
Add -Wdouble-promotion and -Wfloat-conversion for most ports to ban out
implicit floating point conversions, and add extra Travis builds using
MICROPY_FLOAT_IMPL_FLOAT to uncover warnings which weren't found
previously.  For the unix port -Wsign-comparison is added as well but only
there since only clang supports this but gcc doesn't.
2020-04-18 22:42:28 +10:00
Jim Mussared
073b9a5eb8 ports: Enable error text compression for various ports, but not all.
Enabled on: bare-arm, minimal, unix coverage/dev/minimal, stm32, esp32,
esp8266, cc3200, teensy, qemu-arm, nrf.  Not enabled on others to be able
to test the code when the feature is disabled (the default case).

Code size change for this commit:

   bare-arm:  -600 -0.906%
minimal x86:  -308 -0.208%
   unix x64:    +0 +0.000%
unix nanbox:    +0 +0.000%
      stm32: -3368 -0.869% PYBV10
     cc3200: -1024 -0.558%
    esp8266: -2512 -0.368% GENERIC
      esp32: -2876 -0.205% GENERIC[incl -3168(data)]
        nrf: -1708 -1.173% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-04-05 15:02:06 +10:00
Damien George
1a3e386c67 all: Remove spaces inside and around parenthesis.
Using new options enabled in the uncrustify configuration.
2020-03-28 23:36:44 +11:00
Damien George
f8fc78691d py/mpconfig.h: Enable MICROPY_MODULE_GETATTR by default.
To enable lazy loading of submodules (among other things), which is very
useful for MicroPython libraries that want to have optional subcomponents.

Disabled explicitly on minimal ports.
2020-03-26 01:21:04 +11:00
David Lechner
3b07736b6d unix,windows: Use STDIN_FILENO, STDOUT_FILENO macros where appropriate.
This replaces 0 and 1 with STDIN_FILENO and STDOUT_FILENO to make the
intention of the code clearer.
2020-03-25 00:59:05 +11:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George
3f39d18c2b all: Add *FORMAT-OFF* in various places.
This string is recognised by uncrustify, to disable formatting in the
region marked by these comments.  This is necessary in the qstrdef*.h files
to prevent modification of the strings within the Q(...).  In other places
it is used to prevent excessive reformatting that would make the code less
readable.
2020-02-28 10:31:07 +11:00
David Lechner
e79424d672 ports: Allow overriding CROSS_COMPILE in a custom makefile.
Many ports already allow overriding CROSS_COMPILE.  This modifies the
remaining ports to allow it as well.
2019-12-27 23:53:16 +11:00
Damien George
3ee71ff314 minimal/frozentest.mpy: Recompile now that mpy format changed. 2019-10-15 16:58:58 +11:00
Damien George
fd9b7efe39 minimal/frozentest.mpy: Update due to change in bytecode. 2019-10-01 12:26:22 +10:00
Damien George
9abfe85ace minimal/frozentest: Recompile now that mpy version has changed. 2019-09-26 16:40:54 +10:00
Damien George
b45f9de809 bare-arm, minimal: Set CSUPEROPT=-Os to get minimal firmware size.
This option affects py/vm.c and py/gc.c and using -Os gets them compiling a
bit smaller, and small firmware is the aim of these two ports.  Also,
having these files compiled with -Os on these ports, and -O3 as the default
on other ports, gives a better understanding of code-size changes when
making changes to these files.
2019-09-17 11:43:52 +10:00
Damien George
af20c2ead3 py: Add global default_emit_opt variable to make emit kind persistent.
mp_compile no longer takes an emit_opt argument, rather this setting is now
provided by the global default_emit_opt variable.

Now, when -X emit=native is passed as a command-line option, the emitter
will be set for all compiled modules (included imports), not just the
top-level script.

In the future there could be a way to also set this variable from a script.

Fixes issue #4267.
2019-08-28 12:47:58 +10:00
Damien George
999733b1fb minimal: Use soft float for CROSS=1 Cortex-M4 target.
When compiled with hard float the system should enable FP access when it
starts or else FP instructions lead to a fault.  But this minimal port does
not enable (or use) FP and so, to keep it minimal, switch to use soft
floating point.  (This became an issue due to the recent commit
34c04d2319 which saves/restores FP registers
in the NLR state.)
2019-07-01 22:48:05 +10:00
Damien George
7852b287df minimal/frozentest: Recompile now that mpy format and version changed. 2019-03-08 15:53:05 +11:00
Damien George
62483bb957 minimal/frozentest: Recompile now that mpy format changed. 2019-03-05 16:32:05 +11:00
Paul Sokolovsky
fbb8335084 py/objdict: Make .fromkeys() method configurable.
On by default, turned off for minimal/bare-arm. Saves 144 bytes on x86.
2018-12-13 01:20:55 +11:00
Paul Sokolovsky
5a91fce9f8 py/objstr: Make str.count() method configurable.
Configurable via MICROPY_PY_BUILTINS_STR_COUNT.  Default is enabled.
Disabled for bare-arm, minimal, unix-minimal and zephyr ports.  Disabling
it saves 408 bytes on x86.
2018-10-22 22:49:05 +11:00
Paul Sokolovsky
2da5d41350 py/objstr: Make % (__mod__) formatting operator configurable.
Default is enabled, disabled for minimal builds. Saves 1296 bytes on x86,
976 bytes on ARM.
2018-09-20 14:41:08 +10:00
Daniel Shaulov
cac2eddc16 minimal/main: Allow to compile without GC enabled. 2018-05-21 13:13:21 +10:00
Damien George
a36c700d9b minimal/Makefile: Explicitly include lib/utils/printf.c in build.
The bare-metal port needs it and it's no longer included by default since
the Makefile now uses $(PY_CORE_O).
2018-02-22 13:19:09 +11:00
Damien George
9df6451ec5 ports/{bare-arm,minimal}/Makefile: Only build with core source files.
These ports don't need anything from extmod so don't include those files
at all in the build.  This speeds up the build by about 10% when building
with a single core.
2018-02-22 12:48:51 +11:00
Damien George
524ff30275 minimal/README: Update text to better describe what "make run" does. 2018-01-31 21:05:21 +11:00
Damien George
ff93fd4f50 py/persistentcode: Bump .mpy version number to version 3.
The binary and unary ops have changed bytecode encoding.
2017-10-05 10:49:44 +11:00
Damien George
a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Damien George
4a93801c12 all: Update Makefiles and others to build with new ports/ dir layout.
Also renames "stmhal" to "stm32" in documentation and everywhere else.
2017-09-06 14:09:13 +10:00