Commit Graph

66 Commits

Author SHA1 Message Date
Jim Mussared
c1530a0ce8 unix: Refactor mpconfigport.h and mpconfigvariant.h.
This is a no-op for coverage and minimal.

The standard and dev variants have been merged and enable the same feature
set as a typical bare-metal board.  And remove the CI for the dev build.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-13 17:39:03 +10:00
Andrew Leech
86676a43aa unix/mpconfigport: Enable MICROPY_ENABLE_FINALISER when VFS is used. 2022-09-13 13:06:56 +10:00
Chris Waggoner
b1efc1340a mpy-cross,unix: Include alloca.h for NetBSD. 2022-08-23 13:39:18 +10:00
Damien George
8f4c108025 all: Remove MICROPY_PY_IO_FILEIO config option.
Since commit e65d1e69e8 there is no longer an
io.FileIO class, so this option is no longer needed.

This option also controlled whether or not files supported being opened in
binary mode (eg 'rb'), and could, if disabled, lead to confusion as to why
opening a file in binary mode silently did the wrong thing (it would just
open in text mode if MICROPY_PY_IO_FILEIO was disabled).

The various VFS implementations (POSIX, FAT, LFS) were the only places
where enabling this option made a difference, and in almost all cases where
one of these filesystems were enabled, MICROPY_PY_IO_FILEIO was also
enabled.  So it makes sense to just unconditionally enable this feature
(ability to open a file in binary mode) in all cases, and so just remove
this config option altogether.  That makes configuration simpler and means
binary file support always exists (and opening a file in binary mode is
arguably more fundamental than opening in text mode, so if anything should
be configurable then it should be the ability to open in text mode).

Signed-off-by: Damien George <damien@micropython.org>
2022-08-18 11:54:17 +10:00
Jim Mussared
28aaab9590 py/objstr: Add hex/fromhex to bytes/memoryview/bytearray.
These were added in Python 3.5.

Enabled via MICROPY_PY_BUILTINS_BYTES_HEX, and enabled by default for all
ports that currently have ubinascii.

Rework ubinascii to use the implementation of these methods.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-12 12:44:30 +10:00
Jim Mussared
092784da19 ports: Remove unused mp_type_{fileio/textio} macros in mpconfigport.h.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-26 18:07:22 +10:00
Rob Knegjens
d2e4cf00cc unix: Enable MICROPY_GC_SPLIT_HEAP on coverage build.
With a new option to evenly split the GC heap over multiple areas.  This
adds code coverage for gc_add() and code associated with
MICROPY_GC_SPLIT_HEAP.
2022-07-23 00:43:08 +10:00
David Lechner
03fb671833 unix/mpconfigport: Allow overriding MICROPY_EVENT_POLL_HOOK.
This allows variants to supply their own `MICROPY_EVENT_POLL_HOOK`.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-19 11:24:42 +10:00
Damien George
e30e7ced6f unix/mpconfigport: Make MICROPY_EVENT_POLL_HOOK call usleep directly.
So that MICROPY_EVENT_POLL_HOOK can be used without including py/mphal.h.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-18 18:12:39 +10:00
David Lechner
e531b72b56 extmod/nimble: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register bluetooth_nimble_memory
and bluetooth_nimble_root_pointers and removes the same from all
mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:14 +10:00
David Lechner
8fa6191f95 extmod/btstack: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register
bluetooth_btstack_root_pointers and removes the same from all
mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:49:51 +10:00
David Lechner
e5631d9595 unix/alloc: Use MP_REGISTER_ROOT_POINTER() for mmap_region_head.
This uses MP_REGISTER_ROOT_POINTER() to register mmap_region_head and
removes the same from mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:49:09 +10:00
David Lechner
81dbea1ce3 shared/readline: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register the readline_history root
pointer array used by shared/readline.c and removes the registration from
all mpconfigport.h files.

This also required adding a new MICROPY_READLINE_HISTORY_SIZE config option
since not all ports used the same sized array.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:49 +10:00
Damien George
fe55d3e016 unix/variants: Move setting of MICROPY_PY_USELECT to port config file.
The default is the same as before: MICROPY_PY_USELECT=0 and
MICROPY_PY_USELECT_POSIX=1.  But now this can be easily overridden at the
make command-line using, eg:

    make VARIANT=dev CFLAGS_EXTRA=-DMICROPY_PY_USELECT=1

Signed-off-by: Damien George <damien@micropython.org>
2022-06-29 12:22:56 +10:00
Damien George
ac3fb974bc unix/variants: Enable seeding random module on import in dev, coverage.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 23:41:49 +10:00
Damien George
6e71cde6aa ports: Use default VFS config for import_stat and builtin_open.
For ports with MICROPY_VFS and MICROPY_PY_IO enabled their configuration
can now be simplified to use the defaults for mp_import_stat and
mp_builtin_open.

This commit makes no functional change, except for the following minor
points:
- the built-in "open" is removed from the minimal port (it previously did
  nothing)
- the duplicate built-in "input" is removed from the esp32 port
- qemu-arm now delegates to VFS import/open

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Jim Mussared
63431a5536 unix: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Damien George
aab005c75b extmod/modusocket: Provide config macro for socket.listen backlog deflt.
To make it possible to change this value for any given port or board.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-11 15:28:56 +10:00
Damien George
0ac3191d8c unix/mpconfigport.h: Collect together config options from extra level.
This change is a no-op in terms of functionality.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 13:29:13 +11:00
Damien George
2b409ef8a4 unix/moduos: Convert module to use extmod version.
All variants now use extmod/moduos.c as their uos module implementation.
In particular this means they all have MICROPY_VFS enabled and use VfsPosix
for their filesystem.

As part of this, the available functions in uos become more consistent with
other ports:
- coverage variant gets uos.urandom
- minimal and standard variant get: unlink, chdir, getcwd, listdir

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 21:13:57 +11:00
Damien George
fbd47fc46c ports: Consolidate inclusion of umachine module in built-ins.
The inclusion of `umachine` in the list of built-in modules is now done
centrally in py/objmodule.c.  Enabling MICROPY_PY_MACHINE will include this
module.

As part of this, all ports now have `umachine` as the core module name
(previously some had only `machine` as the name).

Signed-off-by: Damien George <damien@micropython.org>
2022-02-03 10:08:54 +11:00
Damien George
aac5a97d08 ports: Move '.frozen' to second entry in sys.path.
In commit 86ce442607 the '.frozen' entry was
added at the start of sys.path, to allow control over when frozen modules
are searched during import, and retain existing behaviour whereby frozen
was searched before the filesystem.

But Python semantics of sys.path require sys.path[0] to be the directory of
the currently executing script, or ''.

This commit moves the '.frozen' entry to second place in sys.path, so
sys.path[0] retains its correct value (described above).

Signed-off-by: Damien George <damien@micropython.org>
2021-12-29 23:55:36 +11:00
Damien George
de43b500bd py/runtime: Allow initialising sys.path/argv with defaults.
If MICROPY_PY_SYS_PATH_ARGV_DEFAULTS is enabled (which it is by default)
then sys.path and sys.argv will be initialised and populated with default
values.  This keeps all bare-metal ports aligned.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-18 00:08:07 +11:00
Jim Mussared
86ce442607 ports: Add '.frozen' as the first entry in sys.path.
Frozen modules will be searched preferentially, but gives the user the
ability to override this behavior.

This matches the previous behavior where "" was implicitly the frozen
search path, but the frozen list was checked before the filesystem.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-18 00:08:07 +11:00
Jim Mussared
a7fa18c203 py/builtinimport: Refactor module importing.
Simplify and document/comment the handling of builtin import for:
- already-loaded modules
- built-in modules
- built-in umodules (formerly weak links)
- filesystem modules

Retains existing functionality with smaller code size but should also
facilitate potential new features (built-in packages, controlling the
frozen path).

Also makes the (unix-only) -m behavior a bit more obvious and configurable.

Code size change with this commit:

   bare-arm:    +0 +0.000%
minimal x86:   -64 -0.039%
   unix x64:   -32 -0.006%
unix nanbox:    -4 -0.001%
      stm32:  -184 -0.047% PYBV10
     cc3200:  -120 -0.065%
    esp8266:  -228 -0.033% GENERIC
      esp32:  -268 -0.018% GENERIC[incl +16(data)]
        nrf:  -152 -0.087% pca10040
        rp2:  -256 -0.052% PICO
       samd:   -80 -0.057% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2021-12-01 13:23:34 +11:00
Jim Mussared
b326edf68c all: Remove MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE.
This commit removes all parts of code associated with the existing
MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE optimisation option, including the
-mcache-lookup-bc option to mpy-cross.

This feature originally provided a significant performance boost for Unix,
but wasn't able to be enabled for MCU targets (due to frozen bytecode), and
added significant extra complexity to generating and distributing .mpy
files.

The equivalent performance gain is now provided by the combination of
MICROPY_OPT_LOAD_ATTR_FAST_PATH and MICROPY_OPT_MAP_LOOKUP_CACHE (which has
been enabled on the unix port in the previous commit).

It's hard to provide precise performance numbers, but tests have been run
on a wide variety of architectures (x86-64, ARM Cortex, Aarch64, RISC-V,
xtensa) and they all generally agree on the qualitative improvements seen
by the combination of MICROPY_OPT_LOAD_ATTR_FAST_PATH and
MICROPY_OPT_MAP_LOOKUP_CACHE.

For example, on a "quiet" Linux x64 environment (i3-5010U @ 2.10GHz) the
change from CACHE_MAP_LOOKUP_IN_BYTECODE, to LOAD_ATTR_FAST_PATH combined
with MAP_LOOKUP_CACHE is:

diff of scores (higher is better)
N=2000 M=2000       bccache -> attrmapcache      diff      diff% (error%)
bm_chaos.py        13742.56 ->   13905.67 :   +163.11 =  +1.187% (+/-3.75%)
bm_fannkuch.py        60.13 ->      61.34 :     +1.21 =  +2.012% (+/-2.11%)
bm_fft.py         113083.20 ->  114793.68 :  +1710.48 =  +1.513% (+/-1.57%)
bm_float.py       256552.80 ->  243908.29 : -12644.51 =  -4.929% (+/-1.90%)
bm_hexiom.py         521.93 ->     625.41 :   +103.48 = +19.826% (+/-0.40%)
bm_nqueens.py     197544.25 ->  217713.12 : +20168.87 = +10.210% (+/-3.01%)
bm_pidigits.py      8072.98 ->    8198.75 :   +125.77 =  +1.558% (+/-3.22%)
misc_aes.py        17283.45 ->   16480.52 :   -802.93 =  -4.646% (+/-0.82%)
misc_mandel.py     99083.99 ->  128939.84 : +29855.85 = +30.132% (+/-5.88%)
misc_pystone.py    83860.10 ->   82592.56 :  -1267.54 =  -1.511% (+/-2.27%)
misc_raytrace.py   21490.40 ->   22227.23 :   +736.83 =  +3.429% (+/-1.88%)

This shows that the new optimisations are at least as good as the existing
inline-bytecode-caching, and are sometimes much better (because the new
ones apply caching to a wider variety of map lookups).

The new optimisations can also benefit code generated by the native
emitter, because they apply to the runtime rather than the generated code.
The improvement for the native emitter when LOAD_ATTR_FAST_PATH and
MAP_LOOKUP_CACHE are enabled is (same Linux environment as above):

diff of scores (higher is better)
N=2000 M=2000        native -> nat-attrmapcache  diff      diff% (error%)
bm_chaos.py        14130.62 ->   15464.68 :  +1334.06 =  +9.441% (+/-7.11%)
bm_fannkuch.py        74.96 ->      76.16 :     +1.20 =  +1.601% (+/-1.80%)
bm_fft.py         166682.99 ->  168221.86 :  +1538.87 =  +0.923% (+/-4.20%)
bm_float.py       233415.23 ->  265524.90 : +32109.67 = +13.756% (+/-2.57%)
bm_hexiom.py         628.59 ->     734.17 :   +105.58 = +16.796% (+/-1.39%)
bm_nqueens.py     225418.44 ->  232926.45 :  +7508.01 =  +3.331% (+/-3.10%)
bm_pidigits.py      6322.00 ->    6379.52 :    +57.52 =  +0.910% (+/-5.62%)
misc_aes.py        20670.10 ->   27223.18 :  +6553.08 = +31.703% (+/-1.56%)
misc_mandel.py    138221.11 ->  152014.01 : +13792.90 =  +9.979% (+/-2.46%)
misc_pystone.py    85032.14 ->  105681.44 : +20649.30 = +24.284% (+/-2.25%)
misc_raytrace.py   19800.01 ->   23350.73 :  +3550.72 = +17.933% (+/-2.79%)

In summary, compared to MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE, the new
MICROPY_OPT_LOAD_ATTR_FAST_PATH and MICROPY_OPT_MAP_LOOKUP_CACHE options:
- are simpler;
- take less code size;
- are faster (generally);
- work with code generated by the native emitter;
- can be used on embedded targets with a small and constant RAM overhead;
- allow the same .mpy bytecode to run on all targets.

See #7680 for further discussion.  And see also #7653 for a discussion
about simplifying mpy-cross options.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-09-16 16:04:03 +10:00
Jim Mussared
60c6d5594f unix: Enable LOAD_ATTR fast path, and map lookup caching.
Enabled for all variants except minimal.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-09-16 16:02:19 +10:00
Jim Mussared
692d36d779 py: Implement partial PEP-498 (f-string) support.
This implements (most of) the PEP-498 spec for f-strings and is based on
https://github.com/micropython/micropython/pull/4998 by @klardotsh.

It is implemented in the lexer as a syntax translation to `str.format`:
  f"{a}" --> "{}".format(a)

It also supports:
  f"{a=}" --> "a={}".format(a)

This is done by extracting the arguments into a temporary vstr buffer,
then after the string has been tokenized, the lexer input queue is saved
and the contents of the temporary vstr buffer are injected into the lexer
instead.

There are four main limitations:
- raw f-strings (`fr` or `rf` prefixes) are not supported and will raise
  `SyntaxError: raw f-strings are not supported`.

- literal concatenation of f-strings with adjacent strings will fail
    "{}" f"{a}" --> "{}{}".format(a)    (str.format will incorrectly use
                                         the braces from the non-f-string)
    f"{a}" f"{a}" --> "{}".format(a) "{}".format(a) (cannot concatenate)

- PEP-498 requires the full parser to understand the interpolated
  argument, however because this entirely runs in the lexer it cannot
  resolve nested braces in expressions like
    f"{'}'}"

- The !r, !s, and !a conversions are not supported.

Includes tests and cpydiffs.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-14 16:58:40 +10:00
Andrew Leech
de60aa7d6b unix: Handle pending events/scheduler in MICROPY_EVENT_POLL_HOOK.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-13 17:19:05 +11:00
Andrew Leech
32c99174e1 unix/mpconfigport.h: Enable MICROPY_PY_DELATTR_SETATTR.
This is a generally useful feature and because it's part of the object
model it cannot be added at runtime by some loadable Python code, so enable
it on the standard unix build.
2020-10-20 23:47:50 +11:00
Jim Mussared
1b1b22905e unix: Implement BLE H4 HCI UART for btstack/nimble.
This commit adds support for using Bluetooth on the unix port via a H4
serial interface (distinct from a USB dongle), with both BTstack and NimBLE
Bluetooth stacks.

Note that MICROPY_PY_BLUETOOTH is now disabled for the coverage variant.
Prior to this commit Bluetooth was anyway not being built on Travis because
libusb was not detected.  But now that bluetooth works in H4 mode it will
be built, and will lead to a large decrease in coverage because Bluetooth
tests cannot be run on Travis.
2020-09-08 12:53:24 +10:00
Jim Mussared
ed14435a8e extmod/modbluetooth: Refactor stack/hci/driver/port bindings.
Previously the interaction between the different layers of the Bluetooth
stack was different on each port and each stack.  This commit defines
common interfaces between them and implements them for cyw43, btstack,
nimble, stm32, unix.
2020-09-08 11:41:31 +10:00
Damien George
2a72e90ab8 extmod/vfs: Add option to use 1970 as Epoch.
By setting MICROPY_EPOCH_IS_1970 a port can opt to use 1970/1/1 as the
Epoch for timestamps returned by stat().  And this setting is enabled on
the unix and windows ports because that's what they use.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-01 12:36:28 +10:00
Damien George
5c8bf12acf all: Fix auto-enable of MICROPY_GCREGS_SETJMP to select GC behaviour.
Only enable it if MICROPY_GCREGS_SETJMP is not already defined, and no
supported architecture is defined.
2020-04-30 16:49:42 +10:00
Jim Mussared
710426024a all: Factor gchelper code to one place and use it for unix & ARM ports.
No functionality change is intended with this commit, it just consolidates
the separate implementations of GC helper code to the lib/utils/ directory
as a general set of helper functions useful for any port.  This reduces
duplication of code, and makes it easier for future ports or embedders to
get the GC implementation correct.

Ports should now link against gchelper_native.c and either gchelper_m0.s or
gchelper_m3.s (currently only Cortex-M is supported but other architectures
can follow), or use the fallback gchelper_generic.c which will work on
x86/x64/ARM.

The gc_helper_get_sp function from gchelper_m3.s is not really GC related
and was only used by cc3200, so it has been moved to that port and renamed
to cortex_m3_get_sp.
2020-04-29 23:45:19 +10:00
Jim Mussared
7563d58210 unix: Add support for modbluetooth and BLE using btstack.
This commit adds full support to the unix port for Bluetooth using the
common extmod/modbluetooth Python bindings.  This uses the libusb HCI
transport, which supports many common USB BT adaptors.
2020-04-29 16:45:46 +10:00
Jim Mussared
cb5994d96e unix/modmachine: Add machine.idle(), implemented using sched_yield.
Also add a definition of MICROPY_EVENT_POLL_HOOK so the unix port can build
against modules that require this.
2020-04-29 16:37:46 +10:00
stijn
30840ebc99 all: Enable extra conversion warnings where applicable.
Add -Wdouble-promotion and -Wfloat-conversion for most ports to ban out
implicit floating point conversions, and add extra Travis builds using
MICROPY_FLOAT_IMPL_FLOAT to uncover warnings which weren't found
previously.  For the unix port -Wsign-comparison is added as well but only
there since only clang supports this but gcc doesn't.
2020-04-18 22:42:28 +10:00
Jim Mussared
c2cfbcc8d4 unix: Implement MICROPY_BEGIN/END_ATOMIC_SECTION protection macros.
This macro is used to implement global serialisation, typically by
disabling IRQs.  On the unix port, if threading is enabled, use the
existing thread mutex (that protects the thread list structure) for this
purpose.  Other places in the code (eg the scheduler) assume this macro
will provide serialisation.
2020-04-13 21:44:09 +10:00
David Lechner
b1066a9f96 unix: Remove custom definition of MP_PLAT_PRINT_STRN.
This removes the port-specific definition of MP_PLAT_PRINT_STRN on the unix
port.  Since fee7e5617f this is no longer a
single function call so we are not really optimising anything over using
the default definition of MP_PLAT_PRINT_STRN which calls
mp_hal_stdout_tx_strn_cooked().
2020-03-25 00:54:18 +11:00
Damien George
2cdf1d25f5 unix: Remove custom file implementation to use extmod's VFS POSIX one.
The implementation in extmod/vfs_posix_file.c is now equivalent to that in
ports/unix/file.c, so remove the latter and use the former instead.
2020-03-18 21:01:07 +11:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
David Lechner
fee7e5617f unix: Release GIL during all system calls.
Addition of GIL EXIT/ENTER pairs are:

- modos: release the GIL during system calls.  CPython does this as well.

- moduselect: release the GIL during the poll() syscall.  This call can be
  blocking, so it is important to allow other threads to run at this time.

- modusocket: release the GIL during system calls.  Many of these calls can
  be blocking, so it is important to allow other threads to run.

- unix_mphal: release the GIL during the read and write syscalls in
  mp_hal_stdin_rx_chr and mp_hal_stdout_tx_strn.  If we don't do this
  threads are blocked when the REPL or the builtin input function are used.

- file, main, mpconfigport.h: release GIL during syscalls in built-in
  functions that could block.
2020-01-26 23:21:29 +11:00
Jim Mussared
bd2fff6687 unix: Add build variants, analogous to boards on bare-metal.
Invoking "make" will still build the standard "micropython" executable, but
other variants are now build using, eg, "make VARIANT=minimal".  This
follows how bare-metal ports specify a particular board, and allows running
any make target (eg clean, test) with any variant.

Convenience targets (eg "make coverage") are provided to retain the old
behaviour, at least for now.

See issue #3043.
2020-01-12 10:34:23 +11:00
Nicko van Someren
4c93955b7b py/objslice: Add support for indices() method on slice objects.
Instances of the slice class are passed to __getitem__() on objects when
the user indexes them with a slice.  In practice the majority of the time
(other than passing it on untouched) is to work out what the slice means in
the context of an array dimension of a particular length.  Since Python 2.3
there has been a method on the slice class, indices(), that takes a
dimension length and returns the real start, stop and step, accounting for
missing or negative values in the slice spec.  This commit implements such
a indices() method on the slice class.

It is configurable at compile-time via MICROPY_PY_BUILTINS_SLICE_INDICES,
disabled by default, enabled on unix, stm32 and esp32 ports.

This commit also adds new tests for slice indices and for slicing unicode
strings.
2019-12-28 23:55:15 +11:00
Damien George
799b6d1e0c extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the
MICROPY_VFS_FAT config to the Makefile level to replace it.  It also moves
the include of the oofatfs source files in the build from each port to a
central place in extmod/extmod.mk.

For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1
at the level of the Makefile.  This will include the relevant oofatfs files
in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
2019-11-11 11:37:38 +11:00
Damien George
1582c7eeb0 unix,windows: Enable module weak links. 2019-10-22 16:23:43 +11:00
Jim Mussared
93bd61ca91 unix: Allow building without a manifest. 2019-10-21 23:21:18 +11:00
Milan Rossa
310b3d1b81 py: Integrate sys.settrace feature into the VM and runtime.
This commit adds support for sys.settrace, allowing to install Python
handlers to trace execution of Python code.  The interface follows CPython
as closely as possible.  The feature is disabled by default and can be
enabled via MICROPY_PY_SYS_SETTRACE.
2019-08-30 16:44:12 +10:00
stijn
af5c998f37 py/modmath: Implement math.isclose() for non-complex numbers.
As per PEP 485, this function appeared in for Python 3.5.  Configured via
MICROPY_PY_MATH_ISCLOSE which is disabled by default, but enabled for the
ports which already have MICROPY_PY_MATH_SPECIAL_FUNCTIONS enabled.
2019-08-17 23:23:17 +10:00