Commit Graph

495 Commits

Author SHA1 Message Date
Damien George
106a83de22 esp32/esp32_partition: Add support for specifying block_size.
To support filesystems that use a block size different from the native
erase-page size.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-22 00:37:25 +11:00
Damien George
5935fa229c esp32/mpconfigport.h: Enable remaining features to get to "extra" level.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-18 16:01:18 +11:00
Damien George
c8cd5a9960 esp32/mpconfigport.h: Use the "extra" feature level.
This commit is a no-op change to simplify existing config.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-18 15:50:01 +11:00
Seon Rozenblum
aca40127bf esp32/boards: Add three UM ESP32-S3 based boards. 2022-02-09 00:13:10 +11:00
Damien George
468d1979ba esp32/machine_adc: Fix configuration of default ADC atten value.
Prior to this fix, if the ADC atten value was not explicitly given then
adc1_config_channel_atten() would never be called.

Fixes issue #8275.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-08 23:45:41 +11:00
Seon Rozenblum
ada836b834 esp32/machine_adcblock: Fix ADC bit width for ESP32-S3. 2022-02-08 12:35:47 +11:00
Damien George
6fe3856c4f esp32/partitions-16MiB.csv: Increase 14MiB filesystem to maximum size.
The original value was 14000000, it's now changed to 14 * 1024 * 1024.

Fixes issue #8266.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-08 12:25:10 +11:00
Damien George
fbd47fc46c ports: Consolidate inclusion of umachine module in built-ins.
The inclusion of `umachine` in the list of built-in modules is now done
centrally in py/objmodule.c.  Enabling MICROPY_PY_MACHINE will include this
module.

As part of this, all ports now have `umachine` as the core module name
(previously some had only `machine` as the name).

Signed-off-by: Damien George <damien@micropython.org>
2022-02-03 10:08:54 +11:00
Damien George
71b3ce3ace esp32: Create .uf2 binaries for S2 and S3 chips.
The name of the filesystem partition is updated to support "ffat", as used
by TinyUF2.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-02 23:47:49 +11:00
Damien George
872bab6b3c esp32: Remove unneeded modesp.h.
Made redundant by 71f4faac27

Signed-off-by: Damien George <damien@micropython.org>
2022-02-02 16:20:41 +11:00
Emil Kondayan
b18d4392b4 esp32/adc: Fix wrong mapping between ADC2 channel and GPIO number.
According to the IO_MUX table in the ESP32 datasheet, the ADC2 channels are
mapped to different GPIO numbers.
2022-02-02 15:29:02 +11:00
Michael O'Cleirigh
eae2e3516c esp32/main: Automatically size SPIRAM heap when allocated using malloc.
This change allows the same heap allocation rules to be used when using
malloc regardless if the board has SPRAM or normal RAM.

Integrating with the esp32-camera for example requires that ESP32 SPRAM be
allocatable using the esp-idf capabilities aware allocation functions.  In
the case of esp32-camera it's for the framebuffer.

Detect when CONFIG_SPIRAM_USE_MALLOC is in use and use the standard
automatic configuration of leaving 1/2 of the SPRAM available to other
FreeRTOS tasks.
2022-02-02 15:24:02 +11:00
Damien George
1f04a9a1fc esp32/esp32_rmt: Select correct last RMT channel on S2, S3, C3 variants.
For example the ESP32-C3 has 2 TX channels and 2 RX channels in total, and
in this case channel 1 must be the default for bitstream.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-01 16:58:56 +11:00
IhorNehrutsa
15e65b77eb esp32/machine_pwm: Clean up macro names and their use.
- Remove UI_RES_SHIFT macro.
- Rename PWFREQ to PWM_FREQ.
- Rename PWRES to PWM_RES_10_BIT.
- Use UI_RES_16_BIT flag instead of HIGHEST_PWM_RES.
2022-02-01 16:47:29 +11:00
IhorNehrutsa
a5e64c209f esp32/machine_pwm: Fix PWM not allowing frequencies < 611 Hz.
Fixes issue #8189.
2022-02-01 16:46:55 +11:00
Damien George
e1a84a0c6f esp32/partitions: Increase size of app-part from 0x180000 to 0x1F0000.
To fill out all of the available flash up to the start of the filesystem
partition.

Signed-off-by: Damien George <damien@micropython.org>
2022-01-27 16:44:13 +11:00
ubi de feo
ea5744fd8d esp32/boards: Provide custom deploy_c3.md for ESP32-C3 boards.
This fixes the flash address for installation on ESP32-C3.
2022-01-22 11:18:50 +11:00
Damien George
bb9d688454 esp32/main: Use heap_caps_get_info on IDF <4.1 to compute total heap.
heap_caps_get_total_size() is only available in IDF 4.1 and above.

Signed-off-by: Damien George <damien@micropython.org>
2022-01-22 10:46:31 +11:00
marcidy
ac39960aa1 esp32/modnetwork: Fix test for WIFI_AUTH_MAX for IDF v4.3.0.
Signed-off-by: marcidy <marcidy@gmail.com>
2022-01-22 00:55:07 +11:00
Sean Coates
6a10d3ed99 esp32/README.md: Fix URL for esp-idf installation.
The current URL points to a pinned version of the document (v4.0.2) and is
currently not found (404).
2022-01-22 00:53:26 +11:00
Damien George
23b1a4e0b6 esp32/main: Allocate at most 1/2 of available IDF heap for MP heap.
So that there is some memory left for the OS, eg for ssl buffers.

See issue #7214.

Signed-off-by: Damien George <damien@micropython.org>
2022-01-22 00:46:12 +11:00
Damien George
648656dbbd esp32/esp32_rmt: Call rmt_driver_install directly if running on core 1.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-22 00:11:14 +11:00
jason
357078504d esp32: Pin MicroPython to core 1 again.
This follows up on #5489, where we changed the esp32 core pinning to core 0
in order to work around an issue with IDF < 4.2.0.  Now that IDF > 4.2.0 is
available, we allow pinning back to core 1, which eliminates some
problematic callback latency with WiFi enabled.

NimBLE is also pinned to core 1 - the same core as MicroPython - when using
IDF >=4.2.
2022-01-22 00:10:16 +11:00
Jonathan Hogg
63438a31bb esp32/machine_adcblock: Add new machine.ADCBlock class and update ADC.
Rework the ADC implementation to follow the improved ADC/ADCBlock API.
This adds support for calibrated voltage readings and the ADC2 block.  The
ADC API is backwards compatible with what it was before this change.

Resolves #6219.
2022-01-21 22:55:24 +11:00
Damien George
a3bbd5332b esp32/machine_bitstream: Reinstate bitstream bit-bang implementation.
The bit-bang implementation was replaced with the RMT implementation in
599b61c086.  This commit brings back that
bit-bang code, and allows it to be selected via the new static method:

    esp32.RMT.bitstream_channel(None)

The bit-bang implementation may be useful if the RMT needs to be used for
something else, or if bit-banging is more stable in certain applications.

Signed-off-by: Damien George <damien@micropython.org>
2022-01-14 16:40:01 +11:00
Damien George
e754c2e84f esp32/esp32_rmt: Install RMT driver on core 1.
MicroPython currently runs on core 0 of the esp32.  Calling
rmt_driver_install will mean that the RMT interrupt handler is also
serviced on core 0.  This can lead to glitches in the RMT output if
WiFi is enabled (for esp32.RMT and machine.bitstream).

This patch calls rmt_driver_install on core 1, ensuring that the RMT
interrupt handler is serviced on core 1.  This prevents glitches.

Fixes issue #8161.

Signed-off-by: Damien George <damien@micropython.org>
2022-01-14 15:41:59 +11:00
Damien George
ff0227fa0d esp32/boards/GENERIC_D2WD: Build with -Os optimisation.
This board has only 2MiB of flash so the build needs to be reduced in size
to fit.  Commit 549448e8bb made all boards
build with -O2 by default (for performance) so this overrides that default.

Signed-off-by: Damien George <damien@micropython.org>
2022-01-09 11:25:37 +11:00
Damien George
df3f59ca4b ports: Update board.json files to link to new board images.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-07 11:33:28 +11:00
Damien George
b96318ab61 esp32: Enable platform module with IDF version.
Output looks like this:

    >>> import platform
    >>> platform.libc_ver()
    ('newlib', '3.0.0')
    >>> platform.platform()
    'MicroPython-1.17.0-xtensa-IDFv4.2.2-with-newlib3.0.0'
    >>> platform.python_compiler()
    'GCC 8.4.0'

Signed-off-by: Damien George <damien@micropython.org>
2022-01-06 18:25:48 +11:00
Simon Baatz
79ae7098ca esp32/machine_bitstream: Fix signal duplication on output pins.
After changing the bitstream implementation to use the RMT driver in
commit 72d86158121e32bbabaeade08f449d507bf40f9a
("esp32/machine_bitstream.c: Replace with RMT-based driver."), using
multiple `Neopixel` instances shows signal duplication between the
instances (i.e. a `write()` on one instance is written to all instances).

On invocation, the rmt driver configures the GPIO matrix to route the
output signal to the respective GPIO pin.  When called for a different
`NeoPixel` instance using a different pin, the new route is established,
but the old route still exists.  Now, the RMT output signal is sent to both
pins.

Fix this by setting the standard GPIO output function for the current pin
after uninstalling the RMT driver.

Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
2022-01-06 13:21:37 +11:00
MikeTeachman
49d8ae3ecc esp32/machine_i2s: Add support for ESP-IDF 4.4.
- Add default values for I2S features added in ESP-IDF 4.4.
- Add workaround for bug introduced in ESP-IDF 4.4
  (https://github.com/espressif/esp-idf/issues/8121).
2022-01-06 13:10:38 +11:00
Jim Mussared
599b61c086 esp32/machine_bitstream: Replace bit-bang code with RMT-based driver.
This aims to solve glitching issues on long neopixel strips.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-22 12:04:13 +11:00
IhorNehrutsa
09fe80d091 esp32/machine_pwm: Keep duty constant when changing frequency.
Save and restore the same duty cycle when the frequency (or frequency
resolution) is changed.  This allows a smooth frequency change.

Also update the esp32 PWM quickref to be clearer.
2021-12-22 00:05:58 +11:00
IhorNehrutsa
4189c64869 esp32/modnetwork: Synchronize WiFi AUTH_xxx constants with IDF values. 2021-12-21 23:56:23 +11:00
Damien George
de43b500bd py/runtime: Allow initialising sys.path/argv with defaults.
If MICROPY_PY_SYS_PATH_ARGV_DEFAULTS is enabled (which it is by default)
then sys.path and sys.argv will be initialised and populated with default
values.  This keeps all bare-metal ports aligned.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-18 00:08:07 +11:00
Jim Mussared
86ce442607 ports: Add '.frozen' as the first entry in sys.path.
Frozen modules will be searched preferentially, but gives the user the
ability to override this behavior.

This matches the previous behavior where "" was implicitly the frozen
search path, but the frozen list was checked before the filesystem.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-18 00:08:07 +11:00
Tomas Vanek
9aa151e3f3 esp32/boards: Remove SPI pin defaults from GENERIC S2/S3 boards.
Default SPI pins are now correctly assigned by machine_hw_spi.c even for S2
and S3.  mpconfigboard.h files define defaults with flipped SPI(1) and
SPI(2) to workaround a bug in machine_hw_spi.c - the bug is fixed.

Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-15 15:53:17 +11:00
Tomas Vanek
e761152d72 esp32/machine_hw_spi: Set proper default SPI(id=2) pins on S2 and S3.
Use IO_MUX pins as defined by ESP IDF in soc/esp32/include/soc/spi_pins.h

ESP32S2 and S3 don't have IO_MUX pins for SPI3, GPIO matrix is always used.
Choose suitable defaults for S2 and S3.

ESP32C3 does not have SPI3 at all.  Don't define pin mappings for it.

Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-15 15:53:17 +11:00
Tomas Vanek
d08886558b esp32/machine_hw_spi: Set proper default SPI(id=1) pins on S2,S3 and C3.
Use IO_MUX pins as defined by ESP IDF in soc/esp32*/include/soc/spi_pins.h
Alternatively use now deprecated HSPI_IOMUX_PIN_NUM_xxx
(or FSPI_IOMUX_PIN_NUM_xxx for ESP32S2) for compatibility with IDF 4.2
and older.

Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-15 15:50:27 +11:00
Tomas Vanek
3305ec44a2 esp32/machine_hw_spi: Fix SPI default pins reordering on ESP32-S2/S3.
The index of machine_hw_spi_obj and machine_hw_spi_default_pins arrays is
assigned to 0 for ARG_id==HSPI_HOST and 1 for another SPI.  On ESP32S2 and
S3 HSPI_HOST=2 so the first set (idx=0) of default pins is used for
SPI(id=2) aka HSPI/SPI3 and the second set (idx=1) for SPI(id=1) aka
FSPI/SPI2.  This makes a misleading mess in MICROPY_HW_SPIxxxx definitions
and it is also in contradiction to the comments around the definitions.

Change the test of ARG_id to fix the order of machine_hw_spi_default_pins.

This change might require adjusting MICROPY_HW_SPIxxxx definitions in
mpconfigboard.h of S2/S3 based boards.

Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-15 15:49:23 +11:00
Tomas Vanek
f9733705a9 esp32/machine_pin: Make GPIO 26 usable for S2,S3 if SPIRAM not config'd.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-15 15:48:46 +11:00
Damien George
5adb1fa40e esp32,esp8266: Extract qstr from object when comparing keys in config().
Following on from a previous fix for the same problem made in
3a431fba50.

Fixes issue #8052.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 14:27:13 +11:00
IhorNehrutsa
b491967bbd esp32/machine_pwm: Implement duty_u16() and duty_ns() PWM methods.
The methods duty_u16() and duty_ns() are implemented to match the existing
docs.  The duty will remain the same when the frequency is changed.
Standard ESP32 as well as S2, S3 and C3 are supported.

Thanks to @kdschlosser for the fix for rounding in resolution calculation.

Documentation is updated and examples expanded for esp32, including the
quickref and tutorial.  Additional notes are added to the machine.PWM docs
regarding limitations of hardware PWM.
2021-12-03 23:58:52 +11:00
Jim Mussared
678f4b959f esp32/boards/GENERIC_S3: Enable BLE on ESP32 S3.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-11-26 11:58:12 +11:00
Seon Rozenblum
1904833e0c esp32: Add SDCard support for S3, and a GENERIC_S3_SPIRAM board.
Also add support for GPIO 47 and 48 on S3 boards.
2021-11-19 14:05:55 +11:00
MikeTeachman
6d5296e65e stm32,esp32: In machine_i2s, make object reference arrays root pointers.
This change eliminates the risk of the IRQ callback accessing invalid data.
Discussed here:
https://github.com/micropython/micropython/pull/7183#discussion_r660209875

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-13 12:22:42 +11:00
MikeTeachman
0be3b91f11 stm32,esp32: In machine_i2s, send null samples in underflow situations.
Eliminate noise data from being sent to the I2S peripheral when the
transmitted sample stream is stopped.

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-12 16:50:15 +11:00
Magnus von Wachenfeldt
6d9da27c21 esp32: Support building with latest IDF v5.
The latest ESP-IDF v5.0-dev declares MAJOR_VERSION 5 and MINOR_VERSION 0.
timer_ll_set_alarm_enable() is also changed to timer_ll_set_alarm_value().
2021-11-12 16:40:46 +11:00
Mike Causer
7f14344428 ports: Add images, features and urls to board.json. 2021-10-28 15:25:38 +11:00
Mike Causer
07ea1afe74 esp32/boards/ESP32_S2_WROVER: Link to specific deploy_s2 instructions. 2021-10-28 12:58:58 +11:00
Mike Causer
3ace779e8e esp32/boards/LOLIN_S2_PICO: Add LOLIN_S2_PICO board definition files. 2021-10-28 12:58:50 +11:00
Damien George
1e4849557d esp32/usb: Further improve speed of USB CDC output.
Following on from ba940250a5, the change here
makes output about 15 times faster (now up to about 550 kbytes/sec).

tinyusb_cdcacm_write_queue will return the number of bytes written, so
there's no need to use tud_cdc_n_write_available.

Signed-off-by: Damien George <damien@micropython.org>
2021-10-28 11:37:35 +11:00
Seon Rozenblum
5b9c9cd097 esp32/boards: Update board and deploy metadata for UM_xxx boards. 2021-10-28 11:32:13 +11:00
Mike Causer
5bb14c4e46 esp32/boards/LOLIN_S2_MINI: Add image to board.json. 2021-10-28 09:51:04 +11:00
Jim Mussared
910e9f9111 esp32: Add specific deploy_s2.md instructions for esp32-s2.
In particular the UM S2 boards (and update the features list).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-28 09:47:47 +11:00
Jim Mussared
e359b077dd ports: Add board.json for all boards.
This will be used by https://micropython.org/download/ to generate the
full listing of boards and firmware files.

Optionally supports a board.md for additional customisation of the
download page, as well as deploy.md for flashing instructions.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-27 14:04:53 +11:00
Damien George
ba940250a5 esp32/usb: Improve speed of USB CDC output.
Signed-off-by: Damien George <damien@micropython.org>
2021-10-16 00:23:59 +11:00
Damien George
549448e8bb esp32: Enable optimisations and move code to iRAM to boost performance.
This commit enables some significant optimisations for esp32:
- move the VM to iRAM
- move hot parts of the runtime to iRAM (map lookup, load global/name,
  mp_obj_get_type)
- enable MICROPY_OPT_LOAD_ATTR_FAST_PATH
- enable MICROPY_OPT_MAP_LOOKUP_CACHE
- disable assertions
- change from -Os to -O2 for compilation

It's hard to measure performance on esp32 due to external flash and
hardware caching.  But this set of changes improves performance compared to
master by (on a TinyPICO with the GENERIC build, using IDF 4.2.2, running
at 160MHz):

diff of scores (higher is better)
N=100 M=100    esp32-master -> esp32-perf       diff      diff% (error%)
bm_chaos.py           71.28 ->     268.08 :  +196.80 = +276.094% (+/-0.04%)
bm_fannkuch.py        44.10 ->      69.31 :   +25.21 = +57.166% (+/-0.01%)
bm_fft.py           1385.27 ->    2538.23 : +1152.96 = +83.230% (+/-0.01%)
bm_float.py         1060.94 ->    3900.62 : +2839.68 = +267.657% (+/-0.03%)
bm_hexiom.py          10.90 ->      32.79 :   +21.89 = +200.826% (+/-0.02%)
bm_nqueens.py       1000.83 ->    2372.87 : +1372.04 = +137.090% (+/-0.01%)
bm_pidigits.py       288.13 ->     664.40 :  +376.27 = +130.590% (+/-0.46%)
misc_aes.py          102.45 ->     345.69 :  +243.24 = +237.423% (+/-0.01%)
misc_mandel.py      1016.58 ->    2121.92 : +1105.34 = +108.731% (+/-0.01%)
misc_pystone.py      632.91 ->    1801.87 : +1168.96 = +184.696% (+/-0.08%)
misc_raytrace.py      76.66 ->     281.78 :  +205.12 = +267.571% (+/-0.05%)
viper_call0.py       210.63 ->     273.17 :   +62.54 = +29.692% (+/-0.01%)
viper_call1a.py      208.45 ->     269.51 :   +61.06 = +29.292% (+/-0.00%)
viper_call1b.py      185.44 ->     228.25 :   +42.81 = +23.086% (+/-0.01%)
viper_call1c.py      185.86 ->     228.90 :   +43.04 = +23.157% (+/-0.01%)
viper_call2a.py      207.10 ->     267.25 :   +60.15 = +29.044% (+/-0.00%)
viper_call2b.py      173.76 ->     209.42 :   +35.66 = +20.523% (+/-0.00%)

Five tests have more than 3x speed up (200%+).

The performance of the tests bm_fft, bm_pidigits and misc_aes now scale
with CPU frequency (eg changing frequency to 240MHz boosts the performance
of these by 50%), which means they are no longer influenced by timing of
external flash access.  (The viper_call* tests did previously scale with
CPU frequency, and they still do.)

Turning off assertions reduces code size by about 80k, and going from -Os
to -O2 costs about 100k, so the net change in code size (for the GENERIC
board) is about +20k.

If a board wants to enable assertions, or use -Os instead of -O2, that's
still possible by overriding the sdkconfig parameters.

Signed-off-by: Damien George <damien@micropython.org>
2021-10-16 00:07:11 +11:00
Damien George
ea186de4c5 esp32: Split out WLAN code from modnetwork.c to network_wlan.c.
To match network_lan.c and network_ppp.c, and make it clear what code is
specifically for WLAN support.

Also provide a configuration option MICROPY_PY_NETWORK_WLAN which can be
used to fully disable network.WLAN (it's enabled by default).

Signed-off-by: Damien George <damien@micropython.org>
2021-09-24 12:41:35 +10:00
Damien George
f046b50ca5 esp32/main: Add option for a board to hook code into startup sequence.
To do this the board must define MICROPY_BOARD_STARTUP, set
MICROPY_SOURCE_BOARD then define the new start-up code.

For example, in mpconfigboard.h:

    #define MICROPY_BOARD_STARTUP board_startup
    void board_startup(void);

in mpconfigboard.cmake:

    set(MICROPY_SOURCE_BOARD
        ${MICROPY_BOARD_DIR}/board.c
    )

and in a new board.c file in the board directory:

    #include "py/mpconfig.h"

    void board_startup(void) {
        boardctrl_startup();
        // extra custom startup
    }

This follows stm32's boardctrl facilities.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-24 12:23:14 +10:00
leo chung
4fdf795efa esp32/mpthreadport: Fix TCB cleanup function so thread_mutex is ready.
Because vPortCleanUpTCB is called by the FreeRTOS idle task, and it checks
thread, but didn't check the thread_mutex.

And if thread is not NULL, but thread_mutex not ready then it will crash
with an error when calling mp_thread_mutex_lock(&thread_mutex, 1).

As suggested by @dpgeorge, move the thread = &thread_entry0 line to the end
of mp_thread_init().

Signed-off-by: leo chung <gewalalb@gmail.com>
2021-09-24 12:12:03 +10:00
Seon Rozenblum
a39a596b79 esp32/machine_pin: Block out IO16 and IO17 when using SPIRAM on ESP32.
Fixes issue #7819.
2021-09-24 10:56:09 +10:00
Seon Rozenblum
35fb90bd57 esp32/usb: Add USB host connection detection for CDC serial output.
This callback allows detecting if there is a USB host connected to the CDC
or not, in which case the stdout_tx should skip CDC TX writing and
flushing or the system will block.

Fixes issue #7820.
2021-09-22 00:42:20 +10:00
Seon Rozenblum
7bf466a281 esp32/README: Updated readme with req IDF vers for ESP32-S2, C3 and S3. 2021-09-22 00:41:02 +10:00
IhorNehrutsa
52636fa692 esp32/machine_pwm: Add support for all PWM timers and channels.
This commit allows using all the available PWM timers (up to 8) and
channels (up to 16), without affecting the PWM API.

If a new frequency is set, first it checks if another timer is using the
same frequency.  If yes, then it uses this timer, otherwise, it creates a
new one.  If all timers are used, the user should set an already used
frequency, or de-init a channel.

This work is based on #6276 and #3608.
2021-09-21 23:18:09 +10:00
Stewart Bonnick
0d9429f44c esp32/boards: Add LOLIN_S2_MINI ESP32-S2 board.
To support Lolin S2 Mini ESP32-S2 Variant board.  More information about
this board can be found at https://www.wemos.cc/en/latest/s2/s2_mini.html
2021-09-21 22:49:51 +10:00
patrick
4cfd85eb4a esp32/boards: Add board definition for ESP32-S2-WROVER module. 2021-09-19 16:49:35 +10:00
Seon Rozenblum
13e6e0d7f5 esp32/machine_hw_spi: Fix hardware SPI DMA channels for S2/S3. 2021-09-19 10:23:12 +10:00
Damien George
80fe25689f esp32/boards: Add new GENERIC_S3 board definition.
Thanks to Seon Rozenblum aka @UnexpectedMaker for the work.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-16 22:58:47 +10:00
Damien George
54d33b266c esp32: Add support for ESP32-S3 SoCs.
Thanks to Seon Rozenblum aka @UnexpectedMaker for the work.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-16 22:58:47 +10:00
Seon Rozenblum
f690fd3a47 esp32/machine_timer: Use tx_update member for IDF 4.4 and above. 2021-09-13 18:25:16 +10:00
Seon Rozenblum
9a7f77bfbc esp32/boards: Add new FeatherS2-Neo board definition. 2021-09-10 15:40:32 +10:00
Damien George
af64c2ddbd extmod/machine_pwm: Factor out machine.PWM bindings to common code.
This commit refactors machine.PWM and creates extmod/machine_pwm.c.  The
esp8266, esp32 and rp2 ports all use this and provide implementations of
the required PWM functionality.  This helps to reduce code duplication and
keep the same Python API across ports.

This commit does not make any functional changes.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-04 16:31:17 +10:00
Damien George
d41f6dde56 extmod/modonewire: Make _onewire module configurable via macro option.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Damien George
afe0634c98 extmod/machine_spi: Make SoftSPI configurable via macro option.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Damien George
122d901ef1 extmod/machine_i2c: Make SoftI2C configurable via macro option.
The zephyr port doesn't support SoftI2C so it's not enabled, and the legacy
I2C constructor check can be removed.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
David Lechner
86371781e9 tools/uncrustify: Force 1 newline at end of file.
To keep things neat and tidy, we ensure that each file has 1 and only 1
newline at the end of each file.

Signed-off-by: David Lechner <david@pybricks.com>
2021-08-31 13:14:45 +10:00
Patrick Van Oosterwijck
a66bd7a489 esp32/boards: Add GENERIC_C3_USB board with USB serial/JTAG support.
Add a new board type for ESP32-C3 revision 3 and up that implement the USB
serial/JTAG port on pin 18 and 19.  This variant uses the USB serial for
programming and console, leaving the UART free.

- Pins 18 and 19 are correctly reserved for this variant.  Also pins 14-17
  are reserved for flash for any ESP32-C3 so they can't be reconfigured
  anymore to crash the system.
- Added usb_serial_jtag.c and .h to implement this interface.
- Interface was tested to work correctly together with webrepl.
- Interface was tested to work correctly when sending and receiving
  large files with ampy.
- Disconnecting terminal or USB will not hang the system when it's
  trying to print.
2021-08-31 00:12:41 +10:00
Jim Mussared
996f703166 esp32,esp8266: Remove dead code for end_ticks in machine_bitstream.
The compiler was optimising this out already so it's a no-op change.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-24 23:55:08 +10:00
Jim Mussared
62fd450e62 drivers/neopixel: Add common machine.bitstream-based neopixel module.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Jim Mussared
71f4faac27 esp32: Replace esp.neopixel with machine.bitstream.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Damien George
e25c5cb8d2 esp32/machine_pin: Make check for non-output pins respect chip variant.
Fixes issue #7631.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-16 15:24:05 +10:00
Jonathan Hogg
5b655665ab esp32/machine_hw_spi: Release GIL during transfers.
Release the GIL while waiting for SPI transfers to complete to allow other
threads to make progress.

Fixes #7662.
2021-08-16 15:21:10 +10:00
Jim Mussared
5733c49174 stm32,esp32,rp2: Enable MICROPY_PY_FSTRINGS by default.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-14 16:58:40 +10:00
Damien George
3835f5f597 esp32/makeimg.py: Get bootloader and partition offset from sdkconfig.
So that it works on ESP32C3, which has the bootloader at 0x0.

Fixes issue #7565.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-10 00:19:49 +10:00
Damien George
8616129f2e esp8266,esp32: Include hidden networks in WLAN.scan results.
Addresses issues #2697 and #5329.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 13:28:34 +10:00
Jim Mussared
bfc8e88ce1 esp32/mpconfigport.h: Enable reverse and inplace special methods.
Reverse operations are supported on stm32 and rp2, and esp32 has enough
space to also enable inplace operations, to make it complete.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-07 13:27:09 +10:00
Patrick Van Oosterwijck
028fc815cd esp32/boards: Add Silicognition wESP32 board configuration.
For rev 7+ boards with 16MB of flash.  Partition table allocates 2.4 MiB
for MicroPython, 11 MiB for the filesystem.
2021-08-07 12:50:13 +10:00
Will Sowerbutts
a3675294ae esp32/machine_uart: Add flow kw-arg to enable hardware flow control.
This enables optional support for the hardware UART to use the RTS and/or
CTS pins for flow control.

The new "flow" constructor keyword specifies a bitmask of RTS and/or CTS.
This matches the interface used by machine.UART on stm32 and rp2.

Previously on ESP32 it was possible to specify which pins to use for the
RTS and CTS signals, but hardware flow control was never functional: CTS
was not checked before transmitting bytes, and RTS was always driven high
(signalling no buffer space available).  With this patch, CTS and RTS both
operate as expected.

This also includes an update to the machine.UART documentation.

Signed-off-by: Will Sowerbutts <will@sowerbutts.com>
2021-08-04 13:52:15 +10:00
Damien George
6214fa3f9e esp32/mphalport: Always yield at least once in delay_ms.
This helps the OS switch to and give other threads processing time during
the sleep.  It also ensures that pending events are handled, even when
sleeping for 0ms.

Fixes issue #5344.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-22 00:20:53 +10:00
Damien George
2cfbe5bc0f esp32/modmachine: Release the GIL in machine.idle().
So that other threads get a chance to run when taskYIELD() is called.

See issue #5344.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-22 00:17:59 +10:00
Damien George
c77225ae5b esp32/boards/GENERIC_C3: Add generic C3-based board.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 23:58:24 +10:00
Damien George
6823514845 esp32: Add initial support for ESP32C3 SoCs.
Supported features for this SoC are:
- UART REPL, filesystem
- Pin, ADC, PWM, SoftI2C, SoftSPI, Timer, RTC
- OneWire, DHT, NeoPixel
- RMT
- WiFi, Bluetooth

Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 23:58:24 +10:00
Damien George
59dbbe9be7 esp32: Fix use of mp_int_t, size_t and uintptr_t.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 23:58:16 +10:00
Damien George
0fc0ccabec esp32/machine_i2s: Add MICROPY_PY_MACHINE_I2S option, enable by default.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 12:31:13 +10:00
Damien George
1f9243f8d4 esp32/machine_dac: Add MICROPY_PY_MACHINE_DAC option, enable by default.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 12:11:10 +10:00
Jonathan Hogg
8be29b9b1b esp32/machine_hw_spi: Use a 2 item SPI queue for long transfers.
Using a 2-item transaction queue instead of 1 allows long transfers to 
be executed with the minimum inter-transaction delay. Limit maximum 
transaction length to ensure an integer multiple of the SPI `bits` 
setting are transferred. Fixes #7511.
2021-07-16 16:12:45 +01:00
Jonathan Hogg
eb3029c669 esp32/machine_spi: Calculate actual attained baudrate.
Calculate the actual baudrate that the hardware is capable of achieving 
and remember it so that printing the SPI object will show this. Fixes 
#7530.
2021-07-16 23:05:30 +10:00
Damien George
136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Damien George
925878b2f8 ports: Update for move of crypto-algorithms, uzlib to lib.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 16:37:20 +10:00