Commit Graph

9487 Commits

Author SHA1 Message Date
Jan Klusacek
b318ebf101 py/modbuiltins: Add support for rounding integers.
As per CPython semantics.  This feature is controlled by
MICROPY_PY_BUILTINS_ROUND_INT which is disabled by default.
2018-05-22 14:18:16 +10:00
Damien George
f2ec792554 py/parsenum: Adjust braces so they are balanced. 2018-05-22 13:20:00 +10:00
Damien George
e773a2cdba stm32/main: Use consistent indenting of macro #if's. 2018-05-22 13:17:03 +10:00
Damien George
f68e722005 stm32/rng: Use Yasmarang for rng_get() if MCU doesn't have HW RNG. 2018-05-22 10:36:03 +10:00
Damien George
cda964198a stm32: Integrate lwIP as implementation of usocket module.
This patch allows to use lwIP as the implementation of the usocket module,
instead of the existing socket-multiplexer that delegates the entire TCP/IP
layer to the NIC itself.

This is disabled by default, and enabled by defining MICROPY_PY_LWIP to 1.

When enabled, the lwIP TCP/IP stack will be included in the build with
default settings for memory usage and performance (see
lwip_inc/lwipopts.h).  It is then up to a particular NIC to register itself
with lwIP using the standard lwIP netif API.
2018-05-21 17:36:06 +10:00
Damien George
41766ba7e6 extmod/modlwip: Allow to compile with MICROPY_PY_LWIP disabled. 2018-05-21 16:46:30 +10:00
Damien George
6c955932f3 stm32/rtc: Don't try to set SubSeconds value on RTC.
The hardware doesn't allow it, instead the value is reset to 255 upon
setting the other calendar/time values.
2018-05-21 14:08:37 +10:00
Damien George
6bd78741c1 py/gc: When GC threshold is hit don't unnecessarily collect twice.
Without this, if GC threshold is hit and there is not enough memory left to
satisfy the request, gc_collect() will run a second time and the search for
memory will happen again and will fail again.

Thanks to @adritium for pointing out this issue, see #3786.
2018-05-21 13:36:21 +10:00
Daniel Shaulov
cac2eddc16 minimal/main: Allow to compile without GC enabled. 2018-05-21 13:13:21 +10:00
Damien George
1ad0013dec tests: Add some tests for bigint hash, float hash and float parsing.
Following outcome of recent fuzz testing and sanitizing by @jepler.
2018-05-21 13:05:40 +10:00
Jeff Epler
95e43efc99 py/objfloat: Fix undefined integer behavior hashing negative zero.
Under ubsan, when evaluating hash(-0.) the following diagnostic occurs:

    ../../py/objfloat.c:102:15: runtime error: negation of
    -9223372036854775808 cannot be represented in type 'mp_int_t' (aka
    'long'); cast to an unsigned type to negate this value to itself

So do just that, to tell the compiler that we want to perform this
operation using modulo arithmetic rules.
2018-05-21 12:49:56 +10:00
Jeff Epler
c4dafcef4f py/mpz: Avoid undefined behavior at integer overflow in mpz_hash.
Before this, ubsan would detect a problem when executing
hash(006699999999999999999999999999999999999999999999999999999999999999999999)

    ../../py/mpz.c:1539:20: runtime error: left shift of 1067371580458 by
    32 places cannot be represented in type 'mp_int_t' (aka 'long')

When the overflow does occur it now happens as defined by the rules of
unsigned arithmetic.
2018-05-21 12:48:26 +10:00
Jeff Epler
60eb5305f6 py/objfloat: Fix undefined shifting behavior in high-quality float hash.
When computing e.g. hash(0.4e3) with ubsan enabled, a diagnostic like the
following would occur:

    ../../py/objfloat.c:91:30: runtime error: shift exponent 44 is too
    large for 32-bit type 'int'

By casting constant "1" to the right type the intended value is preserved.
2018-05-21 12:42:22 +10:00
Jeff Epler
4f71a2a75a py/parsenum: Avoid undefined behavior parsing floats with large exponents.
Fuzz testing combined with the undefined behavior sanitizer found that
parsing unreasonable float literals like 1e+9999999999999 resulted in
undefined behavior due to overflow in signed integer arithmetic, and a
wrong result being returned.
2018-05-21 12:37:57 +10:00
Damien George
5efc575067 py/parsenum: Use int instead of mp_int_t for parsing float exponent.
There is no need to use the mp_int_t type which may be 64-bits wide, there
is enough bit-width in a normal int to parse reasonable exponents.  Using
int helps to reduce code size for 64-bit ports, especially nan-boxing
builds.  (Similarly for the "dig" variable which is now an unsigned int.)
2018-05-21 12:27:38 +10:00
Jeff Epler
bc6c0b28bf py/emitbc: Avoid undefined behavior calling memset() with NULL 1st arg.
Calling memset(NULL, value, 0) is not standards compliant so we must add an
explicit check that emit->label_offsets is indeed not NULL before calling
memset (this pointer will be NULL on the first pass of the parse tree and
it's more logical / safer to check this pointer rather than check that the
pass is not the first one).

Code sanitizers will warn if NULL is passed as the first value to memset,
and compilers may optimise the code based on the knowledge that any pointer
passed to memset is guaranteed not to be NULL.
2018-05-21 12:04:20 +10:00
Damien George
afd0701bf7 esp8266: Change UART(0) to attach to REPL via uos.dupterm interface.
This patch makes it so that UART(0) can by dynamically attached to and
detached from the REPL by using the uos.dupterm function.  Since WebREPL
uses dupterm slot 0 the UART uses dupterm slot 1 (a slot which is newly
introduced by this patch).  UART(0) must now be attached manually in
boot.py (or otherwise) and inisetup.py is changed to provide code to do
this.  For example, to attach use:

    import uos, machine
    uart = machine.UART(0, 115200)
    uos.dupterm(uart, 1)

and to detach use:

    uos.dupterm(None, 1)

When attached, all incoming chars on UART(0) go straight to stdin so
uart.read() will always return None.  Use sys.stdin.read() if it's needed
to read characters from the UART(0) while it's also used for the REPL (or
detach, read, then reattach).  When detached the UART(0) can be used for
other purposes.

If there are no objects in any of the dupterm slots when the REPL is
started (on hard or soft reset) then UART(0) is automatically attached.
Without this, the only way to recover a board without a REPL would be to
completely erase and reflash (which would install the default boot.py which
attaches the REPL).
2018-05-21 11:31:59 +10:00
Damien George
2923671a0c esp32/Makefile: Update to latest ESP IDF version. 2018-05-21 11:28:36 +10:00
Paul Sokolovsky
478410b409 zephyr/Makefile: Add kobj_types_h_target to Z_EXPORTS.
New generated Zephyr header file, without it build breaks.
2018-05-21 10:35:16 +10:00
Paul Sokolovsky
5a023372df zephyr: Add prj_disco_l475_iot1.conf with sensor drivers. 2018-05-21 10:35:16 +10:00
Paul Sokolovsky
7afbc49863 zephyr/prj_base.conf: Enable DHCP and group static IPs together.
Add CONFIG_NET_DHCPV4, which, after
https://github.com/zephyrproject-rtos/zephyr/pull/5750 works as follows:
static addresses are configured after boot, and DHCP requests are sent
at the same time. If valid DHCP reply is received, it overrides static
addresses.

This setup works out of the box for both direct connection to a
workstation (DHCP server usually is not available) and for connection
to a router (DHCP is available and required).
2018-05-21 10:35:16 +10:00
Paul Sokolovsky
0e52ee957d zephyr/modzsensor: Zephyr sensor subsystem bindings. 2018-05-21 10:35:16 +10:00
Paul Sokolovsky
080b0be1c8 zephyr/mpconfigport.h: Enable uhashlib and ubinascii modules.
To be able to use data integrity checks in various tests.
2018-05-21 10:35:16 +10:00
Paul Sokolovsky
9480c188e8 zephyr/main: After builtin testsuite, drop to REPL.
It makes sense to make even testsuite-enabled builds be suitable for
interactive use.
2018-05-21 10:35:16 +10:00
Paul Sokolovsky
1050045979 zephyr/README: Hint about existence of qemu_x86_nommu. 2018-05-21 10:35:16 +10:00
Keith Wiley
3ea0862a6e tools/pydfu.py: Fix typo in comments. 2018-05-18 23:33:19 +10:00
Damien George
828ce16dc8 py/compile: Change comment about ITER_BUF_NSLOTS to a static assertion. 2018-05-18 23:31:00 +10:00
Damien George
43d08d6dd6 py/misc.h: Add MP_STATIC_ASSERT macro to do static assertions. 2018-05-18 23:31:00 +10:00
Tobias Badertscher
769e37b646 stm32/boards: Add config files for new board, STM32L496GDISC. 2018-05-18 22:39:49 +10:00
Tobias Badertscher
4005c63571 stm32/boards: Add board ld and af.csv files for STM32L496 MCU. 2018-05-18 22:39:44 +10:00
Tobias Badertscher
708cdb6276 stm32: Add support for STM32L496 MCU. 2018-05-18 22:37:30 +10:00
Li Weiwei
3e6ab82179 py/repl: Fix handling of unmatched brackets and unfinished quotes.
Before this patch:

    >>> print(')
    ... ')
    Traceback (most recent call last):
      File "<stdin>", line 1
    SyntaxError: invalid syntax

After this patch:

    >>> print(')
    Traceback (most recent call last):
      File "<stdin>", line 1
    SyntaxError: invalid syntax

This matches CPython and prevents getting stuck in REPL continuation when a
1-quote is unmatched.
2018-05-18 15:23:02 +10:00
Damien George
869024dd6e py/vm: Improve performance of opcode dispatch when using switch stmt.
Before this patch, when using the switch statement for dispatch in the VM
(not computed goto) a pending exception check was done after each opcode.
This is not necessary and this patch makes the pending exception check only
happen when explicitly requested by certain opcodes, like jump.  This
improves performance of the VM by about 2.5% when using the switch.
2018-05-18 11:47:03 +10:00
Damien George
46ce395130 py/vm: Use enum names instead of magic numbers in multi-opcode dispatch. 2018-05-18 11:44:26 +10:00
Damien George
58331e3c28 esp8266/modmachine: Allow I2C and SPI to be configured out of the build.
I2C costs about 3000 bytes of code, and SPI costs about 4400 bytes.
2018-05-17 23:37:12 +10:00
Damien George
1e2a6a84a2 extmod/modlwip: Set POLLHUP flag for sockets that are new.
This matches CPython behaviour on Linux: a socket that is new and not
listening or connected is considered "hung up".

Thanks to @rkojedzinszky for the initial patch, PR #3457.
2018-05-17 23:17:36 +10:00
Damien George
dd13065843 esp8266/modnetwork: Raise ValueError when getting invalid WLAN id.
Instead of crashing due to out-of-bounds array access.  Fixes #3348.
2018-05-17 22:12:24 +10:00
Damien George
f8a5cd24d8 esp8266/modnetwork: Return empty str for hostname if STA is inactive.
Instead of crashing due to NULL pointer dereference.  Fixes issue #3341.
2018-05-17 22:11:22 +10:00
Damien George
94a79f340d esp8266/mpconfigport.h: Add some weak links to common Python modules.
To make it easier/simpler to write code that can run under both CPython and
on an ESP8266 board.
2018-05-17 13:27:18 +10:00
Damien George
7d7b9cd5df lib/lwip: Update lwIP to v2.0.3, tag STABLE-2_0_3_RELEASE. 2018-05-17 13:11:31 +10:00
Damien George
9c2044717c extmod/modlwip: Update to work with lwIP v2.0.
lwIP v2.0.3 has been tested with this lwip module and it works very well.
2018-05-17 12:58:34 +10:00
Tom Collins
a883fe12d9 py/objfun: Fix variable name in DECODE_CODESTATE_SIZE() macro.
This patch fixes the macro so you can pass any name in, and the macro will
make more sense if you're reading it on its own.  It worked previously
because n_state is always passed in as n_state_out_var.
2018-05-17 11:20:06 +10:00
Damien George
1b7487e519 py/vm: Adjust #if logic for gil_divisor so braces are balanced.
Having balanced braces { and } makes it easier to navigate the function.
2018-05-16 12:33:39 +10:00
Ryan Shaw
b9ff46f1ed stm32: Enable UART7/8 on F4 series that have these peripherals. 2018-05-16 11:55:07 +10:00
Damien George
cdaace1fdf esp32/modnetwork: Fix STA/AP activate/deactivate for new IDF API.
WIFI_MODE_NULL is no longer supported by the ESP IDF, instead one must use
esp_wifi_start/esp_wifi_stop.
2018-05-15 11:50:37 +10:00
Damien George
c97607db5c py/nlrx86: Use naked attribute on nlr_push for gcc 8.0 and higher.
gcc 8.0 supports the naked attribute for x86 systems so it can now be used
here.  And in fact it is necessary to use this for nlr_push because gcc 8.0
no longer generates a prelude for this function (even without the naked
attribute).
2018-05-15 11:17:28 +10:00
Damien George
e6b66f1092 stm32/usb: Initialise cdc variable to prevent compiler warnings.
Some compilers cannot deduce that cdc will always be written before being
used.
2018-05-15 00:18:03 +10:00
Damien George
47ecbbbecb stm32/usb: Add ability to have 2x VCP interfaces on the one USB device.
This patch adds the configuration MICROPY_HW_USB_ENABLE_CDC2 which enables
a new USB device configuration at runtime: VCP+VCP+MSC.  It will give two
independent VCP interfaces available via pyb.USB_VCP(0) and pyb.USB_VCP(1).
The first one is the usual one and has the REPL on it.  The second one is
available for general use.

This configuration is disabled by default because if the mode is not used
then it takes up about 2200 bytes of RAM.  Also, F4 MCUs can't support this
mode on their USB FS peripheral (eg PYBv1.x) because they don't have enough
endpoints.  The USB HS peripheral of an F4 supports it, as well as both the
USB FS and USB HS peripherals of F7 MCUs.
2018-05-14 23:44:45 +10:00
Damien George
2e565cc0d4 stm32/usb: Change HID report funcs to take HID state, not usbdev state. 2018-05-14 17:04:43 +10:00
Damien George
91bca340ec stm32/usb: Change CDC tx/rx funcs to take CDC state, not usbdev state. 2018-05-14 16:55:04 +10:00