Commit Graph

42 Commits

Author SHA1 Message Date
Damien George
e0a0719416 stm32: Add initial support for STM32WL MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-04 09:43:43 +11:00
Herwin Grobben
8f68e26f79 stm32: Add support for G4 MCUs, and add NUCLEO_G474RE board defn.
This commit adds support for the STM32G4 series of MCUs, and a board
definition for NUCLEO_G474RE.  This board has the REPL on LPUART1 which is
connected to the on-board ST-link USB-UART.
2022-02-01 16:21:01 +11:00
Damien George
88ac5a3116 stm32: Update L4 code to build with latest stm32lib and L4 HAL 1.17.0.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 10:48:01 +11:00
Jan Staal
9e2423e730 stm32: Add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn.
This commit is based upon prior work of @dpgeorge and @koendv.

MCU support for the STM32H7A3 and B3 families MCUs:
- STM32H7A3xx
- STM32H7A3xxQ (SMPS)
- STM32H7B3xx
- STM32H7B3xxQ (SMPS)

Support has been added for the STM32H7B3I_DK board.

Signed-off-by: Jan Staal <info@janstaal.com>
2021-09-16 12:29:28 +10:00
Damien George
61d5a8b9ce stm32/stm32_it: Support TIM17 IRQs on WB MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-20 17:04:39 +10:00
Chris Mason
9d674cf7ab stm32/uart: Add support for LPUART1 on L0, L4, H7 and WB MCUs.
Add LPUART1 as a standard UART.  No low power features are supported, yet.
LPUART1 is enabled as the next available UART after the standard U(S)ARTs:

    STM32WB:      LPUART1 = UART(2)
    STM32L0:      LPUART1 = UART(6)
    STM32L4:      LPUART1 = UART(6)
    STM32H7:      LPUART1 = UART(9)

On all ports: LPUART1 = machine.UART('LP1')

LPUART1 is enabled by defining MICROPY_HW_LPUART1_TX and
MICROPY_HW_LPUART1_RX in mpconfigboard.h.

Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
2021-02-21 15:49:32 +11:00
Damien George
c5af3217d9 stm32/timer: Support TIM1 on WB MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-25 16:32:48 +10:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George
03b73ce329 stm32/stm32_it: Don't call __HAL_USB_HS_EXTI_CLEAR_FLAG on H7 MCUs.
It doesn't exist on these MCUs.
2020-01-31 23:25:18 +11:00
iabdalkader
3078a4b2e2 stm32/timer: Add missing TIM 1/15/16/17 IRQ handlers for H7 MCUs. 2019-12-19 17:19:53 +11:00
Chris Mason
d61e7a6d8a stm32/uart: Add support for UART4/5 on L0 MCUs. 2019-12-05 15:31:41 +11:00
Damien George
d06fd384c2 stm32/can: Factor CAN driver into low-level and Python bindings.
can.c now contains the low-level C interface to the CAN peripheral, and
pyb_can.c the Python-level class/methods/constants.
2019-09-23 16:58:08 +10:00
Damien George
400a128e11 stm32/stm32_it: Include correct EXTI interrupt handlers for L0 MCUs. 2019-08-29 12:00:18 +10:00
Damien George
97e8e036c5 stm32/usbd: Support USB device mode on STM32L432 MCUs. 2019-08-15 12:46:04 +10:00
Damien George
59b7166d87 stm32: Add initial support for STM32WBxx MCUs.
This new series of MCUs is similar to the L4 series with an additional
Cortex-M0 coprocessor.  The firmware for the wireless stack must be managed
separately and MicroPython does not currently interface to it.  Supported
features so far include: RTC, UART, USB, internal flash filesystem.
2019-07-17 16:33:31 +10:00
Damien George
4c1ad1f691 stm32: Add support for USB on L0 MCUs. 2019-07-16 14:45:53 +10:00
Damien George
73e8b7e0e4 stm32: Update components to work with new H7xx HAL. 2019-07-03 23:40:49 +10:00
Damien George
04c7cdb668 stm32: Enter bootloader via a system reset.
Entering a bootloader (ST system bootloader, or custom mboot) from software
by directly branching to it is not reliable, and the reliability of it
working can depend on the peripherals that were enabled by the application
code.  It's also not possible to branch to a bootloader if the WDT is
enabled (unless the bootloader has specific provisions to feed the WDT).

This patch changes the way a bootloader is entered from software by first
doing a complete system reset, then branching to the desired bootloader
early on in the start-up process.  The top two words of RAM (of the stack)
are reserved to store flags indicating that the bootloader should be
entered after a reset.
2019-06-25 14:15:49 +10:00
Chris Mason
14cf91f704 stm32: In link script, define start of stack separately from heap end.
Previously the end of the heap was the start (lowest address) of the stack.
With the changes in this commit these addresses are now independent,
allowing a board to place the heap and stack in separate locations.
2019-06-14 15:29:24 +10:00
Chris Mason
1b956ec817 stm32: Add support for F413 MCUs.
Includes:
- Support for CAN3.
- Support for UART9 and UART10.
- stm32f413xg.ld and stm32f413xh.ld linker scripts.
- stm32f413_af.csv alternate function mapping.
- startup_stm32f413xx.s because F413 has different interrupt vector table.
- Memory configuration with: 240K filesystem, 240K heap, 16K stack.
2019-05-02 16:26:53 +10:00
roland van straten
c9eb7eb449 stm32/stm32_it: Guard UART7_IRQHandler with check for UART7 define.
All STM32 with a UART7 also have a UART8 and vice versa, but this change
improves readability and allows for them to be independent in the future.
2019-03-14 14:02:21 +11:00
Francisco J. Manno
f938e70c69 stm32: Add compile-time option to use HSI as clock source.
To use HSI instead of HSE define MICROPY_HW_CLK_USE_HSI as 1 in the board
configuration file.  The default is to use HSE.

HSI has been made the default for the NUCLEO_F401RE board to serve as an
example, and because early revisions of this board need a hardware
modification to get HSE working.
2019-03-05 15:49:08 +11:00
Dave Hylands
a270cf280b stm32/stm32_it: Fix RTC IRQ handler to handle all EXTI IRQs on F0 MCUs. 2019-02-19 15:17:47 +11:00
Damien George
b178958c07 stm32/pendsv: Clean up pendsv IRQ handler and eliminate duplicate code. 2019-02-08 01:20:13 +11:00
Damien George
1bcf4afb10 stm32/systick: Make periodic systick callbacks use a cyclic func table.
Instead of checking each callback (currently storage and dma) explicitly
for each SysTick IRQ, use a simple circular function table indexed by the
lower bits of the millisecond tick counter.  This allows callbacks to be
easily enabled/disabled at runtime, and scales well to a large number of
callbacks.
2019-02-08 01:20:13 +11:00
Damien George
9dfbb6cc16 stm32/rtc: Get rtc.wakeup working on F0 MCUs.
The problem was that the EXTI line for the RTC wakeup event is line 20 on
the F0, so the interrupt was not firing.
2018-07-31 17:24:10 +10:00
Damien George
37a7257aff stm32/timer: Support TIM1 on F0 MCUs. 2018-06-15 10:50:08 +10:00
Damien George
ea7e747979 stm32: Add support for STM32F0 MCUs. 2018-05-28 21:49:49 +10:00
Damien George
070937fe93 stm32: Add support for Cortex-M0 CPUs. 2018-05-28 21:46:20 +10:00
Damien George
f497723802 stm32: Allow to have no storage support if there are no block devices.
If no block devices are defined by a board then storage support will be
disabled.  This means there is no filesystem provided by either the
internal flash or external SPI flash.  But the VFS system can still be
enabled and filesystems provided on external devices like an SD card.
2018-05-28 21:45:46 +10:00
Damien George
aa4a7a8732 stm32/usb: Guard USB device code with #if for whether USB is enabled.
With this change, all the USB source code can now be passed through the
compiler even if the MCU does not have a USB peripheral.
2018-05-28 21:45:46 +10:00
Ryan Shaw
b9ff46f1ed stm32: Enable UART7/8 on F4 series that have these peripherals. 2018-05-16 11:55:07 +10:00
Damien George
88c26a48b4 stm32/pyb_i2c: Put pyb.I2C under MICROPY_PY_PYB_LEGACY setting.
When disabled, the pyb.I2C class saves around 8k of code space and 172
bytes of RAM.  The same functionality is now available in machine.I2C
(for F4 and F7 MCUs).

It is still enabled by default.
2018-05-14 13:53:46 +10:00
Damien George
cf9fc7346d stm32: Allow a board to configure the HSE in bypass mode.
To use HSE bypass mode the board should define:

    #define MICROPY_HW_CLK_USE_BYPASS (1)

If this is not defined, or is defined to 0, then HSE oscillator mode is
used.
2018-04-11 16:46:47 +10:00
Damien George
68b70fac5c stm32/stm32_it: Add IRQ handler for I2C4. 2018-04-11 16:37:45 +10:00
Damien George
a7ebac2eae stm32/can: Allow CAN pins to be configured per board.
This patch allows a given board to configure which pins are used for the
CAN peripherals, in a similar way to all the other bus peripherals (I2C,
UART, SPI).  To enable CAN on a board the mpconfigboard.h file should
define (for example):

    #define MICROPY_HW_CAN1_TX (pin_B9)
    #define MICROPY_HW_CAN1_RX (pin_B8)
    #define MICROPY_HW_CAN2_TX (pin_B13)
    #define MICROPY_HW_CAN2_RX (pin_B12)

And the board config file should no longer define MICROPY_HW_ENABLE_CAN.
2018-04-11 16:35:24 +10:00
Damien George
e37b8ba5a5 stm32: Use STM32xx macros instead of MCU_SERIES_xx to select MCU type.
The CMSIS files for the STM32 range provide macros to distinguish between
the different MCU series: STM32F4, STM32F7, STM32H7, STM32L4, etc.  Prefer
to use these instead of custom ones.
2018-03-17 10:42:50 +11:00
Damien George
a25e6c6b65 stm32/can: Add CAN.info() method to retrieve error and tx/rx buf info. 2018-03-16 18:28:35 +11:00
iabdalkader
fe29419c10 stm32/stm32_it: Add support for H7 MCUs. 2018-03-09 15:12:01 +11:00
Damien George
5c320bd0b0 stm32: Introduce MICROPY_HW_ENABLE_USB and clean up USB config.
This patch allows to completely compile-out support for USB, and no-USB is
now the default.  If a board wants to enable USB it should define:

    #define MICROPY_HW_ENABLE_USB (1)

And then one or more of the following to select the USB PHY:

    #define MICROPY_HW_USB_FS (1)
    #define MICROPY_HW_USB_HS (1)
    #define MICROPY_HW_USB_HS_IN_FS (1)
2018-02-13 18:51:08 +11:00
Damien George
a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Damien George
01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00