Commit Graph

91 Commits

Author SHA1 Message Date
Damien Tournoud
e982c1d8de esp32/network_lan: Add support for SPI-based ethernet chips.
Add support for various SPI-based ethernet chips (W5500, KSZ8851SNL,
DM9051) to the ESP32 port.  This leverages the existing support in ESP-IDF
for these chips -- which configures these chips in "MAC raw" mode -- and
the existing support for network.LAN in the ESP32 port.  In particular,
this doesn't leverage the wiznet5k support that is used on the rp2 and
stm32 ports (because that's for native use of lwIP).

Tested on the POE Featherwing (with the SJIRQ solder jumper bridged) and a
ESP32-S3 feather.

A note about the interrupt pin: The W5500 implementation within ESP-IDF
relies on hardware interrupt, and requires the interrupt pin from the W5500
to be wired to a GPIO.  This is not the case by default on the Adafruit
Ethernet FeatherWing, which makes it not directly compatible with this
implementation.
2023-01-18 11:16:09 +11:00
David Lechner
4dcfd19bbf extmod/extmod.cmake: Add MICROPY_PY_BTREE compiler definition.
Instead of defining `MICROPY_PY_BTREE` in `mpconfigport.h` we can define
it via CMake similar to how other ports that use Makefiles define it in
`mpconfigport.mk`.

Signed-off-by: David Lechner <david@pybricks.com>
2022-11-17 23:20:58 +11:00
Jim Mussared
092784da19 ports: Remove unused mp_type_{fileio/textio} macros in mpconfigport.h.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-26 18:07:22 +10:00
Damien George
5dbb822ca4 esp32/mpconfigport: Enable BLE synchronous events and pairing/bonding.
Signed-off-by: Damien George <damien@micropython.org>
2022-07-22 17:41:21 +10:00
David Lechner
b63282c361 esp32: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all root pointers in the
esp32 port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner
e531b72b56 extmod/nimble: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register bluetooth_nimble_memory
and bluetooth_nimble_root_pointers and removes the same from all
mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:14 +10:00
David Lechner
81dbea1ce3 shared/readline: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register the readline_history root
pointer array used by shared/readline.c and removes the registration from
all mpconfigport.h files.

This also required adding a new MICROPY_READLINE_HISTORY_SIZE config option
since not all ports used the same sized array.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:49 +10:00
Damien George
f63b4f85aa py/parse: Work around xtensa esp-2020r3 compiler bug.
This commit works around a bug in xtensa-esp32-elf-gcc version esp-2020r3.

The bug is in generation of loop constructs.  The below code is generated
by the xtensa-esp32 compiler.  The first extract is the buggy machine code
and the second extract is the corrected machine code.  The test
`basics/logic_constfolding.py` fails with the first code and succeeds with
the second.

Disassembly of section .text.push_result_rule:

00000000 <push_result_rule>:
  ...
  d6:   209770       or      a9, a7, a7
  d9:   178976       loop    a9, f4 <push_result_rule+0xf4>
                     d9: R_XTENSA_SLOT0_OP   .text.push_result_rule+0xf4
  dc:   030190       rsr.lend        a9
  df:   130090       wsr.lbeg        a9
  e2:   a8c992       addi    a9, a9, -88
  e5:   06d992       addmi   a9, a9, 0x600
  e8:   130190       wsr.lend        a9
  eb:   002000       isync
  ee:   030290       rsr.lcount      a9
  f1:   01c992       addi    a9, a9, 1
  f4:   1494e7       bne     a4, a14, 10c <push_result_rule+0x10c>
                     f4: R_XTENSA_SLOT0_OP   .text.push_result_rule+0x10c

Disassembly of section .text.push_result_rule:

00000000 <push_result_rule>:
  ...
  d6:   209770       or      a9, a7, a7
  d9:   178976       loop    a9, f4 <push_result_rule+0xf4>
                     d9: R_XTENSA_SLOT0_OP   .text.push_result_rule+0xf4
  dc:   030190       rsr.lend        a9
  df:   130090       wsr.lbeg        a9
  e2:   000091       l32r    a9, fffc00e4 <push_result_rule+0xfffc00e4>
                     e2: R_XTENSA_SLOT0_OP   .literal.push_result_rule+0x18
  e5:   0020f0       nop
  e8:   130190       wsr.lend        a9
  eb:   002000       isync
  ee:   030290       rsr.lcount      a9
  f1:   01c992       addi    a9, a9, 1
  f4:   1494e7       bne     a4, a14, 10c <push_result_rule+0x10c>
                     f4: R_XTENSA_SLOT0_OP   .text.push_result_rule+0x10c

Work done in collaboration with @jimmo.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-09 13:56:30 +10:00
Damien George
6bda80d811 esp32/machine_i2c: Implement write-then-read I2C transfers.
I2C transfers are much more efficient if they are combined, instead of
doing separate writes and reads.

Fixes issue #7134.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-01 13:20:30 +10:00
Damien George
6e71cde6aa ports: Use default VFS config for import_stat and builtin_open.
For ports with MICROPY_VFS and MICROPY_PY_IO enabled their configuration
can now be simplified to use the defaults for mp_import_stat and
mp_builtin_open.

This commit makes no functional change, except for the following minor
points:
- the built-in "open" is removed from the minimal port (it previously did
  nothing)
- the duplicate built-in "input" is removed from the esp32 port
- qemu-arm now delegates to VFS import/open

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Damien George
c70f96f1c5 esp32: Track allocated iRAM and free it on soft reset.
This makes sure all iRAM allocated for native code is freed on soft reset.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-19 17:31:56 +10:00
Jim Mussared
24127a4ac4 esp32: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:56:30 +10:00
Jim Mussared
bb794f05b7 extmod: Make port-included extmod modules use MP_REGISTER_MODULES.
_onewire, socket, and network were previously added by the port rather
than objmodule.c.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Damien George
818be10bb5 zephyr/moduos: Convert module to use extmod version.
This also adds uos.unlink(), for all ports that use extmod/moduos.c.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George
1c53d85162 esp32/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George
926b554daf extmod/moduos: Create general uos module to be used by all ports.
Based on the rp2 port version, with the rp2 port converted to use this
module.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Daniël van de Giessen
665f0e2a68 esp32: Sleep one tick in MICROPY_EVENT_POLL_HOOK.
If MicroPython threads are enabled, loops waiting for an incoming event
should release the GIL and suspend, allowing other tasks to run while they
wait.

Prior to this commit, the problem can easily be observed by running a
thread that is both busy and regularly releases the GIL (for example a loop
doing something then sleeping a few ms after each iteration).  When the
main task is at the REPL, the thread is significantly stalled.  If the main
task is manually made to release the GIL (for example, by calling
utime.sleep_ms(500)) the other thread can be seen immediately working at
the expected speed again.

Additionally, there are various instances in where blocking functions run
MICROPY_EVENT_POLL_HOOK in a loop while they wait for a certain event/
condition.  For example the uselect methods poll objects to determine
whether data is available, but uses 100% of CPU while it does, constantly
calling MICROPY_EVENT_POLL_HOOK in the process.

The MICROPY_EVENT_POLL_HOOK macro is only ever used in waiting loops, where
(if threads are enabled) it makes sense to yield for a single tick so that
these loops do not consume all CPU cycles but instead other threads may
execute.  (In fact, the thing these loops wait for may even indirectly or
directly depend on another task being able to run.)

This change moves the sleep that was inside the REPL input function to
inside the MICROPY_EVENT_POLL_HOOK macro, where the GIL is already being
released, solving both the blocking REPL issue and the 100% CPU use issue
at the same time.

Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
2022-03-02 12:57:43 +11:00
Damien George
5935fa229c esp32/mpconfigport.h: Enable remaining features to get to "extra" level.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-18 16:01:18 +11:00
Damien George
c8cd5a9960 esp32/mpconfigport.h: Use the "extra" feature level.
This commit is a no-op change to simplify existing config.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-18 15:50:01 +11:00
Damien George
fbd47fc46c ports: Consolidate inclusion of umachine module in built-ins.
The inclusion of `umachine` in the list of built-in modules is now done
centrally in py/objmodule.c.  Enabling MICROPY_PY_MACHINE will include this
module.

As part of this, all ports now have `umachine` as the core module name
(previously some had only `machine` as the name).

Signed-off-by: Damien George <damien@micropython.org>
2022-02-03 10:08:54 +11:00
Damien George
b96318ab61 esp32: Enable platform module with IDF version.
Output looks like this:

    >>> import platform
    >>> platform.libc_ver()
    ('newlib', '3.0.0')
    >>> platform.platform()
    'MicroPython-1.17.0-xtensa-IDFv4.2.2-with-newlib3.0.0'
    >>> platform.python_compiler()
    'GCC 8.4.0'

Signed-off-by: Damien George <damien@micropython.org>
2022-01-06 18:25:48 +11:00
IhorNehrutsa
b491967bbd esp32/machine_pwm: Implement duty_u16() and duty_ns() PWM methods.
The methods duty_u16() and duty_ns() are implemented to match the existing
docs.  The duty will remain the same when the frequency is changed.
Standard ESP32 as well as S2, S3 and C3 are supported.

Thanks to @kdschlosser for the fix for rounding in resolution calculation.

Documentation is updated and examples expanded for esp32, including the
quickref and tutorial.  Additional notes are added to the machine.PWM docs
regarding limitations of hardware PWM.
2021-12-03 23:58:52 +11:00
Seon Rozenblum
1904833e0c esp32: Add SDCard support for S3, and a GENERIC_S3_SPIRAM board.
Also add support for GPIO 47 and 48 on S3 boards.
2021-11-19 14:05:55 +11:00
MikeTeachman
6d5296e65e stm32,esp32: In machine_i2s, make object reference arrays root pointers.
This change eliminates the risk of the IRQ callback accessing invalid data.
Discussed here:
https://github.com/micropython/micropython/pull/7183#discussion_r660209875

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-13 12:22:42 +11:00
Damien George
549448e8bb esp32: Enable optimisations and move code to iRAM to boost performance.
This commit enables some significant optimisations for esp32:
- move the VM to iRAM
- move hot parts of the runtime to iRAM (map lookup, load global/name,
  mp_obj_get_type)
- enable MICROPY_OPT_LOAD_ATTR_FAST_PATH
- enable MICROPY_OPT_MAP_LOOKUP_CACHE
- disable assertions
- change from -Os to -O2 for compilation

It's hard to measure performance on esp32 due to external flash and
hardware caching.  But this set of changes improves performance compared to
master by (on a TinyPICO with the GENERIC build, using IDF 4.2.2, running
at 160MHz):

diff of scores (higher is better)
N=100 M=100    esp32-master -> esp32-perf       diff      diff% (error%)
bm_chaos.py           71.28 ->     268.08 :  +196.80 = +276.094% (+/-0.04%)
bm_fannkuch.py        44.10 ->      69.31 :   +25.21 = +57.166% (+/-0.01%)
bm_fft.py           1385.27 ->    2538.23 : +1152.96 = +83.230% (+/-0.01%)
bm_float.py         1060.94 ->    3900.62 : +2839.68 = +267.657% (+/-0.03%)
bm_hexiom.py          10.90 ->      32.79 :   +21.89 = +200.826% (+/-0.02%)
bm_nqueens.py       1000.83 ->    2372.87 : +1372.04 = +137.090% (+/-0.01%)
bm_pidigits.py       288.13 ->     664.40 :  +376.27 = +130.590% (+/-0.46%)
misc_aes.py          102.45 ->     345.69 :  +243.24 = +237.423% (+/-0.01%)
misc_mandel.py      1016.58 ->    2121.92 : +1105.34 = +108.731% (+/-0.01%)
misc_pystone.py      632.91 ->    1801.87 : +1168.96 = +184.696% (+/-0.08%)
misc_raytrace.py      76.66 ->     281.78 :  +205.12 = +267.571% (+/-0.05%)
viper_call0.py       210.63 ->     273.17 :   +62.54 = +29.692% (+/-0.01%)
viper_call1a.py      208.45 ->     269.51 :   +61.06 = +29.292% (+/-0.00%)
viper_call1b.py      185.44 ->     228.25 :   +42.81 = +23.086% (+/-0.01%)
viper_call1c.py      185.86 ->     228.90 :   +43.04 = +23.157% (+/-0.01%)
viper_call2a.py      207.10 ->     267.25 :   +60.15 = +29.044% (+/-0.00%)
viper_call2b.py      173.76 ->     209.42 :   +35.66 = +20.523% (+/-0.00%)

Five tests have more than 3x speed up (200%+).

The performance of the tests bm_fft, bm_pidigits and misc_aes now scale
with CPU frequency (eg changing frequency to 240MHz boosts the performance
of these by 50%), which means they are no longer influenced by timing of
external flash access.  (The viper_call* tests did previously scale with
CPU frequency, and they still do.)

Turning off assertions reduces code size by about 80k, and going from -Os
to -O2 costs about 100k, so the net change in code size (for the GENERIC
board) is about +20k.

If a board wants to enable assertions, or use -Os instead of -O2, that's
still possible by overriding the sdkconfig parameters.

Signed-off-by: Damien George <damien@micropython.org>
2021-10-16 00:07:11 +11:00
Damien George
ea186de4c5 esp32: Split out WLAN code from modnetwork.c to network_wlan.c.
To match network_lan.c and network_ppp.c, and make it clear what code is
specifically for WLAN support.

Also provide a configuration option MICROPY_PY_NETWORK_WLAN which can be
used to fully disable network.WLAN (it's enabled by default).

Signed-off-by: Damien George <damien@micropython.org>
2021-09-24 12:41:35 +10:00
Damien George
f046b50ca5 esp32/main: Add option for a board to hook code into startup sequence.
To do this the board must define MICROPY_BOARD_STARTUP, set
MICROPY_SOURCE_BOARD then define the new start-up code.

For example, in mpconfigboard.h:

    #define MICROPY_BOARD_STARTUP board_startup
    void board_startup(void);

in mpconfigboard.cmake:

    set(MICROPY_SOURCE_BOARD
        ${MICROPY_BOARD_DIR}/board.c
    )

and in a new board.c file in the board directory:

    #include "py/mpconfig.h"

    void board_startup(void) {
        boardctrl_startup();
        // extra custom startup
    }

This follows stm32's boardctrl facilities.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-24 12:23:14 +10:00
Damien George
af64c2ddbd extmod/machine_pwm: Factor out machine.PWM bindings to common code.
This commit refactors machine.PWM and creates extmod/machine_pwm.c.  The
esp8266, esp32 and rp2 ports all use this and provide implementations of
the required PWM functionality.  This helps to reduce code duplication and
keep the same Python API across ports.

This commit does not make any functional changes.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-04 16:31:17 +10:00
Damien George
d41f6dde56 extmod/modonewire: Make _onewire module configurable via macro option.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Damien George
afe0634c98 extmod/machine_spi: Make SoftSPI configurable via macro option.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Damien George
122d901ef1 extmod/machine_i2c: Make SoftI2C configurable via macro option.
The zephyr port doesn't support SoftI2C so it's not enabled, and the legacy
I2C constructor check can be removed.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Jim Mussared
71f4faac27 esp32: Replace esp.neopixel with machine.bitstream.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Jim Mussared
5733c49174 stm32,esp32,rp2: Enable MICROPY_PY_FSTRINGS by default.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-14 16:58:40 +10:00
Jim Mussared
bfc8e88ce1 esp32/mpconfigport.h: Enable reverse and inplace special methods.
Reverse operations are supported on stm32 and rp2, and esp32 has enough
space to also enable inplace operations, to make it complete.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-07 13:27:09 +10:00
Damien George
6823514845 esp32: Add initial support for ESP32C3 SoCs.
Supported features for this SoC are:
- UART REPL, filesystem
- Pin, ADC, PWM, SoftI2C, SoftSPI, Timer, RTC
- OneWire, DHT, NeoPixel
- RMT
- WiFi, Bluetooth

Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 23:58:24 +10:00
Damien George
0fc0ccabec esp32/machine_i2s: Add MICROPY_PY_MACHINE_I2S option, enable by default.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 12:31:13 +10:00
Damien George
1f9243f8d4 esp32/machine_dac: Add MICROPY_PY_MACHINE_DAC option, enable by default.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 12:11:10 +10:00
Damien George
e9e9c76ddf all: Rename mp_keyboard_interrupt to mp_sched_keyboard_interrupt.
To match mp_sched_exception() and mp_sched_schedule().

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:13:43 +10:00
Damien George
7cbf826a95 py/scheduler: Add mp_sched_exception() to schedule a pending exception.
This helper is added to properly set a pending exception, to mirror
mp_sched_schedule(), which schedules a function.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:13:43 +10:00
Damien George
66a86a0615 esp32: Add initial support for ESP32S2 SoCs.
Builds against IDF v4.3-beta2.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 10:31:06 +10:00
Damien George
ab9d47e023 esp32: Enable btree module.
This was disabled with the move to CMake, and this commit reinstates it.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-09 13:33:26 +10:00
Thorsten von Eicken
902da05a18 esp32: Set MICROPY_USE_INTERNAL_ERRNO=0 to use toolchain's errno.h.
The underlying OS (the ESP-IDF) uses it's own internal errno codes and so
it's simpler and cleaner to use those rather than trying to convert
everything to the values defined in py/mperrno.h.
2021-02-15 23:47:02 +11:00
Damien George
f12462ddc4 esp32: Remove obsolete IDF v3 code wrapped in MICROPY_ESP_IDF_4.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 23:22:05 +11:00
Damien George
da2b5fa1c1 esp32/boards: Enable BLE on all boards.
BLE was enabled by default on all boards in the existing make build.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 16:40:07 +11:00
Damien George
ad4656b861 all: Rename BYTES_PER_WORD to MP_BYTES_PER_OBJ_WORD.
The "word" referred to by BYTES_PER_WORD is actually the size of mp_obj_t
which is not always the same as the size of a pointer on the target
architecture.  So rename this config value to better reflect what it
measures, and also prefix it with MP_.

For uses of BYTES_PER_WORD in setting the stack limit this has been
changed to sizeof(void *), because the stack usually grows with
machine-word sized values (eg an nlr_buf_t has many machine words in it).

Signed-off-by: Damien George <damien@micropython.org>
2021-02-04 22:46:42 +11:00
Damien George
7c44354592 ports: Remove def of MP_PLAT_PRINT_STRN if it's the same as the default.
To simplify config, there's no need to specify MP_PLAT_PRINT_STRN if it's
the same as the default definition in py/mpconfig.h.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-04 22:39:17 +11:00
robert
b4062894df esp32/mpconfigport.h: Seed the urandom module on import.
For seeding, the RNG function of the ESP-IDF is used, which is told to be a
true RNG, at least when WiFi or Bluetooth is enabled.  Seeding on import is
as per CPython.  To obtain a reproducible sequence of pseudo-random numbers
one must explicitly seed with a known value.
2020-10-29 14:11:08 +11:00
Andrew Leech
97108fce57 esp32/mpconfigport.h: Enable MICROPY_PY_DELATTR_SETATTR.
To align with unix and stm32 ports.
2020-10-21 11:11:48 +11:00
Damien George
9e0533b9e1 extmod/machine_spi: Remove "id" arg in SoftSPI constructor.
The SoftSPI constructor is now used soley to create SoftSPI instances, it
can no longer delegate to create a hardware-based SPI instance.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
aaed33896b extmod/machine_i2c: Remove "id" arg in SoftI2C constructor.
The SoftI2C constructor is now used soley to create SoftI2C instances, it
can no longer delegate to create a hardware-based I2C instance.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00