Commit Graph

27 Commits

Author SHA1 Message Date
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George
ad7213d3c3 py: Add mp_raise_msg_varg helper and use it where appropriate.
This commit adds mp_raise_msg_varg(type, fmt, ...) as a helper for
nlr_raise(mp_obj_new_exception_msg_varg(type, fmt, ...)).  It makes the
C-level API for raising exceptions more consistent, and reduces code size
on most ports:

   bare-arm:   +28 +0.042%
minimal x86:  +100 +0.067%
   unix x64:   -56 -0.011%
unix nanbox:  -300 -0.068%
      stm32:  -204 -0.054% PYBV10
     cc3200:    +0 +0.000%
    esp8266:   -64 -0.010% GENERIC
      esp32:  -104 -0.007% GENERIC
        nrf:  -136 -0.094% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-02-13 11:52:40 +11:00
Damien George
14bec7964f stm32/spi: Factor out code to calculate SPI source frequency. 2019-07-03 12:02:46 +10:00
iabdalkader
07af74daef stm32/spi: Enable SPI IRQs and add IRQHandlers for H7 MCUs.
The H7 HAL uses SPI IRQs when the SPI is running in DMA mode.
2019-05-15 15:59:25 +10:00
Damien George
6e30f96b0b ports: Convert legacy uppercase macro names to lowercase. 2019-02-12 14:54:51 +11:00
boochow
9d3372bded stm32: Add peripheral support for STM32L432.
The L432 does not have: GPIOD, TIM3, SPI2, ADC dual mode operation, 2-banks
flash.
2018-12-06 13:32:43 +11:00
iabdalkader
f0db1a5ab1 stm32/spi: Fix calculation of SPI clock source on H7 MCUs. 2018-10-17 15:26:26 +11:00
Damien George
6f015d337d stm32/spi: Be sure to set all SPI config values in SPI proto init. 2018-09-11 17:36:11 +10:00
Damien George
b0c8a94b41 stm32/dma: Pass DMA direction as parameter to dma_init not in cfg struct
Some DMA channels (eg for SDIO) can be used in both directions and this
patch allows such peripherals to dynamically select the DMA direction.
2018-09-11 17:18:06 +10:00
Damien George
056e0b6293 stm32/spi: Add implementation of low-level SPI protocol.
Can be used, for example, to configure external SPI flash using a hardware
SPI interface (code to be put in a board's bdev.c file):

    STATIC const spi_proto_cfg_t hard_spi_bus = {
        .spi = &spi_obj[5],
        .baudrate = 10000000,
        .polarity = 0,
        .phase = 0,
        .bits = 8,
        .firstbit = SPI_FIRSTBIT_MSB,
    };

    STATIC mp_spiflash_cache_t spi_bdev_cache;

    const mp_spiflash_config_t spiflash_config = {
        .bus_kind = MP_SPIFLASH_BUS_SPI,
        .bus.u_spi.cs = pin_A0,
        .bus.u_spi.data = (void*)&hard_spi_bus,
        .bus.u_spi.proto = &spi_proto,
        .cache = &spi_bdev_cache,
    };

    spi_bdev_t spi_bdev;
2018-08-14 22:10:43 +10:00
Damien George
8300be6d0f stm32/spi: Split out pyb.SPI and machine.SPI bindings to their own files
The aim here is to have spi.c contain the low-level SPI driver which is
independent (not fully but close) of MicroPython objects and methods, and
the higher-level bindings are separated out to pyb_spi.c and machine_spi.c.
2018-08-14 17:11:07 +10:00
Damien George
86e0b25532 stm32/spi: Round up prescaler calc to never exceed requested baudrate.
Requesting a baudrate of X should never configure the peripheral to have a
baudrate greater than X because connected hardware may not be able to
handle higher speeds.  This patch makes sure to round the prescaler up so
that the actual baudrate is rounded down.
2018-08-10 16:39:47 +10:00
Damien George
e1ae9939ac stm32: Support compiling with object representation D.
With this and previous patches the stm32 port can now be compiled using
object representation D (nan boxing).  Note that native code and frozen mpy
files with float constants are currently not supported with this object
representation.
2018-07-08 23:25:11 +10:00
Damien George
e49cd106b4 stm32/spi: Fix SPI driver so it can send/recv more than 65535 bytes.
The DMA peripheral is limited to transferring 65535 elements at a time so
in order to send more than that the SPI driver must split the transfers up.

The user must be aware of this limit if they are relying on precise timing
of the entire SPI transfer, because there might be a small delay between
the split transfers.

Fixes issue #3851, and thanks to @kwagyeman for the original fix.
2018-06-18 17:41:14 +10:00
Damien George
ea7e747979 stm32: Add support for STM32F0 MCUs. 2018-05-28 21:49:49 +10:00
Damien George
2dca693c24 stm32: Change pin_X and pyb_pin_X identifiers to be pointers to objects.
Rather than pin objects themselves.  The actual object is now pin_X_obj and
defines are provided so that pin_X is &pin_X_obj.  This makes it so that
code that uses pin objects doesn't need to know if they are literals or
objects (that need pointers taken) or something else.  They are just
entities that can be passed to the map_hal_pin_xxx functions.  This mirrors
how the core handles constant objects (eg mp_const_none which is
&mp_const_none_obj) and allows for the possibility of different
implementations of the pin layer.

For example, prior to this patch there was the following:

    extern const pin_obj_t pin_A0;
    #define pyb_pin_X1 pin_A0
    ...
    mp_hal_pin_high(&pin_A0);

and now there is:

    extern const pin_obj_t pin_A0_obj;
    #define pin_A0 (&pin_A0_obj)
    #define pyb_pin_X1 pin_A0
    ...
    mp_hal_pin_high(pin_A0);

This patch should have minimal effect on board configuration files.  The
only change that may be needed is if a board has .c files that configure
pins.
2018-03-28 16:29:50 +11:00
Damien George
6b51eb22c8 stm32: Consolidate include of genhdr/pins.h to single location in pin.h.
genhdr/pins.h is an internal header file that defines all of the pin
objects and it's cleaner to have pin.h include it (where the struct's for
these objects are defined) rather than an explicit include by every user.
2018-03-27 20:25:24 +11:00
Damien George
6e91ab5806 stm32/spi: Further updates to use newer versions of HAL names. 2018-02-13 15:53:08 +11:00
Damien George
3eb0694b97 stm32: Update HAL macro and constant names to use newer versions.
Newer versions of the HAL use names which are cleaner and more
self-consistent amongst the HAL itself.  This patch switches to use those
names in most places so it is easier to update the HAL in the future.
2018-02-13 15:37:35 +11:00
Damien George
20f5de9b39 stm32/spi: Accept machine.SPI object in spi_from_mp_obj() function.
Also, change ValueError to TypeError if the argument to this function is
not of an SPI type.
2018-02-05 14:32:56 +11:00
Damien George
4ad3ede21a stm32/spi: Provide better separation between SPI driver and uPy objs.
There is an underlying hardware SPI driver (built on top of the STM HAL)
and then on top of this sits the legacy pyb.SPI class as well as the
machine.SPI class.  This patch improves the separation between these
layers, in particular decoupling machine.SPI from pyb.SPI.
2018-02-05 14:30:32 +11:00
Damien George
5ddd1488bd stm32/spi: Allow SPI peripheral state to persist across a soft reset.
The SPI sub-system is independent from the uPy state (eg the heap) and so
can safely persist across a soft reset.  And this is actually necessary for
drivers that rely on SPI and that also need to persist across soft reset
(eg external SPI flash memory).
2018-02-02 19:01:11 +11:00
Damien George
762db9ad2f stm32/spi: Add support for a board naming SPI peripherals 4, 5 and 6. 2018-02-02 17:44:05 +11:00
Damien George
c0496fd44d stm32/spi: Make SPI DMA wait routine more power efficient by using WFI.
The routine waits for the DMA to finish, which is signalled from a DMA IRQ
handler.  Using WFI makes the CPU sleep while waiting for the IRQ to arrive
which decreases power consumption.  To make it work correctly the check for
the change in state must be atomic and so IRQs must be disabled during the
check.  The key feature of the Cortex MCU that makes this possible is that
WFI will exit when an IRQ arrives even if IRQs are disabled.
2018-02-01 11:45:29 +11:00
Peter D. Gray
dfe8980acf stm32/spi: If MICROPY_HW_SPIn_MISO undefined, do not claim pin on init.
This permits output-only SPI use.
2017-12-28 18:00:20 +11:00
Damien George
a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Damien George
01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00