Commit Graph

132 Commits

Author SHA1 Message Date
Rami Ali
27a503f632 stmhal: Refactor UART configuration to use pin objects.
This follows the pattern of other peripherals (I2C, SPI) to specify the
pins using pin objects instead of a pair of GPIO port and pin number.  It
makes it easier to customise the UART pins for a particular board.
2016-12-05 14:26:41 +11:00
Nicholas Graumann
0d75b0d962 stmhal: Add address parameters to openocd config files.
Also make l4 config the default for STM32L476DISC board.
2016-11-28 15:27:36 +11:00
Nicholas Graumann
50a2966913 stmhal: Add OpenOCD configuration for STM32L4. 2016-11-28 15:27:36 +11:00
Krzysztof Blazewicz
7928b3e347 stmhal/boards: configure all F4 boards to work with new HAL
changes include:
* use single GPIO.BSRR instead of BSRRH and BSRRL
* change HSE_STARTUP_TIMEOUT to 100 ms
* define LSE_STARTUP_TIMEOUT to 5 s
2016-11-16 12:43:27 +01:00
Damien George
7bb0f7b0f6 drivers: Add "from micropython import const" when const is used.
Following best-practice use of the const feature, to make it compatible
with Python.
2016-11-03 12:41:11 +11:00
Damien George
b4cc68e4a4 stmhal/led: Refactor LED to use mp_hal_pin_output() init function.
As part of this patch the MICROPY_HW_LED_OTYPE setting is removed because
it is now unused (all boards anyway had this as OUTPUT_PP).
2016-10-18 14:43:05 +11:00
Dave Hylands
c08f50bcf7 stmhal: Disable network and usocket for ESPRUINO_PICO 2016-10-06 11:47:45 +11:00
Dave Hylands
7a9c183c20 stmhal: Fix ESPRUINO_PICO by adding ld scripts with correct flash size. 2016-10-05 11:42:50 +11:00
Dave Hylands
1f433c719b stmhal: Fix linker map for STM32L476 chips.
In particular, this makes the L4 .isr_vector section 16K in size so it's
the same as the F4/F7 MCUs.  The patch also moves the L4 filesystem to
the end of flash, which allows for 512K filesystem on the 1Mb devices
like the STM32L476DISC.
2016-10-04 14:31:19 +11:00
Nicholas Graumann
7165fbd8f4 stmhal: Add virtual com port support for STM32L476DISC. 2016-09-27 22:08:55 -05:00
Krzysztof Blazewicz
9310dad15d stmhal: Put common definitions from linker files to common.ld. 2016-09-22 12:03:12 +10:00
Damien George
4874bde104 stmhal/boards: For OLIMEX_E407, enable UART1 and fix I2C1 mapping.
UART1 can be used even if the switch is enabled.  The schematics for this
board make I2C1 available on PB8/PB9, even though it can also be mapped
to PB6/PB7.

See #2396 and #2427.
2016-09-19 13:00:15 +10:00
Damien George
0fd3d8d19f stmhal/boards: Add pllvalues.py script to compute PLL values for sysclk.
The algorithm here should mirror that in the machine.freq() function.
2016-09-14 13:00:27 +10:00
Dave Hylands
fedab995ee stmhal: Set STM32F7DISC CPU Frequency to 216 MHz
This set the CPU frequency to 216 MHz (the max) and
leaves the USB Frequency at 48 MHz.

These settings were copied from one of the HAL examples.
2016-09-04 18:14:41 +10:00
Matt Brejza
5af6184e72 stmhal: Make ADC channel 16 available on L4 MCUs. 2016-08-25 13:49:51 +10:00
Damien George
dfb8144037 stmhal/boards: Update STM32L476 pin defs to include ADC channels.
This patch introduces proper ADC Pin definitions in stm32l476_af.csv.
Originally provided by @tobbad.
2016-08-11 13:01:57 +10:00
David Siorpaes
b67eb20ed0 stmhal: Fix I2C mappings for STM32F429DISC board. 2016-08-04 22:51:53 +10:00
Stefan Hölzl
c8332a5463 stmhal: Add board definition files for Olimex STM32-E407. 2016-06-06 10:21:02 +01:00
Damien George
1dc2862a83 stmhal/led: Allow LEDs to be in PWM mode with TIM1 and channels 1-4.
This allows PYBv3 to use PWM for LED(1) and LED(2).
2016-05-13 11:01:21 +01:00
Tobias Badertscher
b924f649cd stmhal: Fix clock configuration for STM32L476-discovery; also add I2C2. 2016-05-10 09:20:30 +01:00
Damien George
08d3d5d9ab stmhal: For LIMIFROG board, add early-init function to get to DFU mode. 2016-05-05 17:00:30 +01:00
Tobias Badertscher
770f169e63 stmhal: Add board files for LIMIFROG board. 2016-05-05 17:00:16 +01:00
Tobias Badertscher
0b6e28c999 stmhal: L4: Add board definition files for STM32L476DISC. 2016-04-16 22:11:02 +01:00
Dave Hylands
99fc0d120a stmhal: NUCELO_F401RE cleanup
Added definitions for SPI1, SPI2, and SPI3
Removed USB stuff (that could be removed)
Updated BOARD name defintion
2016-03-13 12:36:39 +00:00
Dave Hylands
00f921ce02 stmhal: Rename STM32F401NUCLEO to NUCLEO_F401RE
This makes the board match the name printed on the board (and
agree with the documentation)
2016-03-13 12:36:39 +00:00
Dave Hylands
031fadd10e stmhal: Add board definition files for NUCLEO_F411RE 2016-03-12 16:16:15 -08:00
Christopher Arndt
9b5e05a7c7 stmhal: Add makefile target and configuration to deploy via OpenOCD. 2016-03-09 23:00:17 +00:00
Ryan Shaw
ad725a6661 stmhal: Add support for generic STM32F439 board (non DISCO). 2016-03-09 22:46:41 +00:00
Dave Hylands
484a471f9b stmhal: Fix some typos in stm32f411 files, regarding FS layout and CSV. 2016-03-07 12:42:30 +00:00
Dave Hylands
367c084c4b stmhal: Fix typo in stm32f401.ld file, regarding flash size. 2016-03-07 12:38:57 +00:00
Pavol Rusnak
ce3beb1672 stmhal: Unify comments in stm32f4xx_hal_conf.h across all boards.
To make it easier to spot differences.
2016-03-07 11:28:36 +00:00
Dave Hylands
ec37239e53 stmhal: Improvements to the STM32F4DISC UART config settings. 2016-02-15 10:11:29 +00:00
Dave Hylands
4b2938a4b0 stmhal: Some NETDUINO_PLUS_2 cleanup
- Put the I2C bus on the corect pins
- Add the appropriate board_init to power the shield
2016-02-15 10:07:27 +00:00
Dave Hylands
32b7e93535 stmhal: NUCLEO 401 - Add definitions for I2C2 and I2C3 2016-02-10 21:26:14 -08:00
Dave Hylands
f791e14750 stmhal: CERB40 - Add pins defines for I2C3 2016-02-10 21:25:30 -08:00
Dave Hylands
38ac23c942 stmhal: NUCLEO 401 - Add a bunch of missing pins and reorder the pins
This groups the pins for a port together and puts them in numerical
order. It also adds ARDUINO pin names.
2016-02-10 21:23:45 -08:00
Dave Hylands
a888d5ab91 stmhal: Improve NUCLEO-F401RE build, with UART2 as REPL.
This enables MICROPY_HW_HAS_FLASH which got missed.

The HW has UART2 on the 401 connected to the STLINK procesor
which exposes it as USB serial. This connects that up so that
you can get a REPL using the USB serial.
2016-02-10 16:50:05 +00:00
Paul Sokolovsky
97a0846af9 stmhal/diskio: Introduce MICROPY_HW_HAS_FLASH setting.
To allow to reuse stmhal/diskio for ports which don't have flash but have
other storage devices.
2016-02-06 15:07:01 +02:00
Damien George
a8a4b01af6 stmhal: Add PWM capability for LED(3) and LED(4) on pyboards.
USB CDC no longer needs TIM3 (which was originally used for LED(4) PWM)
and so TIM3 has been freed for general purpose use by the user.  Hence
LED(4) lost its PWM capabilities.

This patch reinstates the PWM capabilities using a semi-generic piece
of code which allows to configure a timer and PWM channel to use for any
LED.  But the PWM capability is only configured if the LED is set to an
intensity between 1 and 254 (ie only when needed).  In that case the
relevant timer is configured for PWM.  It's up to the user to make sure
the timers are not used if PWM is active.

This patch also makes sure that PWM LEDs are turned off using standard
GPIO when calling led.off() or led.intensity(0), instead of just setting
the PWM counter to zero.
2016-01-29 22:44:43 +00:00
Damien George
ea89b80ff4 stmhal: Make TIM3 available for use by the user.
TIM3 is no longer used by USB CDC for triggering outgoing data, so we
can now make it available to the user.

PWM fading on LED(4) is now gone, but will be reinstated in a new way.
2016-01-29 22:31:56 +00:00
Carmine Noviello
3d42aa07dd stmhal: Add support for the STM32F401NUCLEO board.
Includes full version of pins.csv file with correct mapping of the Nucleo
STM32F401RE chip (LQFP64 package).
2016-01-27 12:30:36 +00:00
Fabian
d0f31ccf33 stmhal: Change PLL configuration for STM32F7DISC.
Changes USB clock from 50MHz to 48MHz which improves USB communication.
2015-12-18 22:16:49 +00:00
Tobias Badertscher
c5d8ffef58 stmhal: Extend SPI support to fully support all SPI devices on STM32F429.
This includes SPI4, SPI5 and SPI6.
2015-12-16 00:38:36 +00:00
Damien George
f7c4f9a640 stmhal: For SPI config, use HW_SPIx_SCK instead of HW_ENABLE_SPIx.
Previously, SPI was configured by a board defining MICROPY_HW_ENABLE_SPIx
to 0 or 1.  Now, the board should define MICROPY_HW_SPIx_SCK, MISO, MOSI
and NSS.  This makes it the same as how I2C is configured.
2015-12-12 15:02:02 +00:00
neilh10
1be0fde45c stmhal: Enable two USB phys to be supported together.
This is refactoring to enable support for the two USB PHYs available on
some STM32F4 processors to be used at the same time. The F405/7 & F429
have two USB PHYs, others such as the F411 only have one PHY.

This has been tested separately on a pyb10 (USB_FS PHY) and F429DISC
(USB_HS PHY) to be able to invoke a REPL/USB.  I have modified a PYBV10
to support two PHYs.

The long term objective is to support a 2nd USB PHY to be brought up as a
USB HOST, and possibly a single USB PHY to be OTG.
2015-12-09 09:56:36 +00:00
Damien George
66b96822fb stmhal: Add option to free up TIM3 from USB VCP polling.
This is a hack to free up TIM3 so that it can be used by the user.
Instead we use the PVD irq to call the USB VCP polling function, and
trigger it from SysTick (so SysTick itself does not do any processing).

The feature is enabled for pyboard lite only, since it lacks timers.
2015-12-04 14:07:15 +00:00
Damien George
e9a684d741 stmhal: Add board config files for PYBv1.1 and PYBLITEv1.0. 2015-12-02 12:47:09 +00:00
Dave Hylands
061eb6fa6b stmahl: Fix usbd_conf.c for devices which don't have USB_HS at all.
The STMCube examples define both USE_USB_HS and USE_USB_HS_IN_FS when they
use the HS in FS mode.

The STM32F401 doesn't have a USB_HS at all, so the USB_OTG_HS instance
doesn't even exist.
2015-11-26 16:17:26 +00:00
Tobias Badertscher
8844d031e4 stmhal: Add support for the STM32F429I-DISCO kit by STMicro. 2015-11-25 23:53:26 +00:00
T S
86aa16bea6 stmhal: Implement delayed RTC initialization with LSI fallback.
If RTC is already running at boot then it's left alone.  Otherwise, RTC is
started at boot but startup function returns straight away.  RTC startup
is then finished the first time it is used.  Fallback to LSI if LSE fails
to start in a certain time.

Also included:
 MICROPY_HW_CLK_LAST_FREQ
        hold pyb.freq() parameters in RTC backup reg
 MICROPY_HW_RTC_USE_US
        option to present datetime sub-seconds in microseconds
 MICROPY_HW_RTC_USE_CALOUT
        option to enable RTC calibration output

CLK_LAST_FREQ and RTC_USE_CALOUT are enabled for PYBv1.0.
2015-11-23 23:23:07 +00:00