Commit Graph

64 Commits

Author SHA1 Message Date
Jim Mussared
678f4b959f esp32/boards/GENERIC_S3: Enable BLE on ESP32 S3.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-11-26 11:58:12 +11:00
Seon Rozenblum
1904833e0c esp32: Add SDCard support for S3, and a GENERIC_S3_SPIRAM board.
Also add support for GPIO 47 and 48 on S3 boards.
2021-11-19 14:05:55 +11:00
Mike Causer
7f14344428 ports: Add images, features and urls to board.json. 2021-10-28 15:25:38 +11:00
Mike Causer
07ea1afe74 esp32/boards/ESP32_S2_WROVER: Link to specific deploy_s2 instructions. 2021-10-28 12:58:58 +11:00
Mike Causer
3ace779e8e esp32/boards/LOLIN_S2_PICO: Add LOLIN_S2_PICO board definition files. 2021-10-28 12:58:50 +11:00
Seon Rozenblum
5b9c9cd097 esp32/boards: Update board and deploy metadata for UM_xxx boards. 2021-10-28 11:32:13 +11:00
Mike Causer
5bb14c4e46 esp32/boards/LOLIN_S2_MINI: Add image to board.json. 2021-10-28 09:51:04 +11:00
Jim Mussared
910e9f9111 esp32: Add specific deploy_s2.md instructions for esp32-s2.
In particular the UM S2 boards (and update the features list).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-28 09:47:47 +11:00
Jim Mussared
e359b077dd ports: Add board.json for all boards.
This will be used by https://micropython.org/download/ to generate the
full listing of boards and firmware files.

Optionally supports a board.md for additional customisation of the
download page, as well as deploy.md for flashing instructions.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-27 14:04:53 +11:00
Damien George
549448e8bb esp32: Enable optimisations and move code to iRAM to boost performance.
This commit enables some significant optimisations for esp32:
- move the VM to iRAM
- move hot parts of the runtime to iRAM (map lookup, load global/name,
  mp_obj_get_type)
- enable MICROPY_OPT_LOAD_ATTR_FAST_PATH
- enable MICROPY_OPT_MAP_LOOKUP_CACHE
- disable assertions
- change from -Os to -O2 for compilation

It's hard to measure performance on esp32 due to external flash and
hardware caching.  But this set of changes improves performance compared to
master by (on a TinyPICO with the GENERIC build, using IDF 4.2.2, running
at 160MHz):

diff of scores (higher is better)
N=100 M=100    esp32-master -> esp32-perf       diff      diff% (error%)
bm_chaos.py           71.28 ->     268.08 :  +196.80 = +276.094% (+/-0.04%)
bm_fannkuch.py        44.10 ->      69.31 :   +25.21 = +57.166% (+/-0.01%)
bm_fft.py           1385.27 ->    2538.23 : +1152.96 = +83.230% (+/-0.01%)
bm_float.py         1060.94 ->    3900.62 : +2839.68 = +267.657% (+/-0.03%)
bm_hexiom.py          10.90 ->      32.79 :   +21.89 = +200.826% (+/-0.02%)
bm_nqueens.py       1000.83 ->    2372.87 : +1372.04 = +137.090% (+/-0.01%)
bm_pidigits.py       288.13 ->     664.40 :  +376.27 = +130.590% (+/-0.46%)
misc_aes.py          102.45 ->     345.69 :  +243.24 = +237.423% (+/-0.01%)
misc_mandel.py      1016.58 ->    2121.92 : +1105.34 = +108.731% (+/-0.01%)
misc_pystone.py      632.91 ->    1801.87 : +1168.96 = +184.696% (+/-0.08%)
misc_raytrace.py      76.66 ->     281.78 :  +205.12 = +267.571% (+/-0.05%)
viper_call0.py       210.63 ->     273.17 :   +62.54 = +29.692% (+/-0.01%)
viper_call1a.py      208.45 ->     269.51 :   +61.06 = +29.292% (+/-0.00%)
viper_call1b.py      185.44 ->     228.25 :   +42.81 = +23.086% (+/-0.01%)
viper_call1c.py      185.86 ->     228.90 :   +43.04 = +23.157% (+/-0.01%)
viper_call2a.py      207.10 ->     267.25 :   +60.15 = +29.044% (+/-0.00%)
viper_call2b.py      173.76 ->     209.42 :   +35.66 = +20.523% (+/-0.00%)

Five tests have more than 3x speed up (200%+).

The performance of the tests bm_fft, bm_pidigits and misc_aes now scale
with CPU frequency (eg changing frequency to 240MHz boosts the performance
of these by 50%), which means they are no longer influenced by timing of
external flash access.  (The viper_call* tests did previously scale with
CPU frequency, and they still do.)

Turning off assertions reduces code size by about 80k, and going from -Os
to -O2 costs about 100k, so the net change in code size (for the GENERIC
board) is about +20k.

If a board wants to enable assertions, or use -Os instead of -O2, that's
still possible by overriding the sdkconfig parameters.

Signed-off-by: Damien George <damien@micropython.org>
2021-10-16 00:07:11 +11:00
Stewart Bonnick
0d9429f44c esp32/boards: Add LOLIN_S2_MINI ESP32-S2 board.
To support Lolin S2 Mini ESP32-S2 Variant board.  More information about
this board can be found at https://www.wemos.cc/en/latest/s2/s2_mini.html
2021-09-21 22:49:51 +10:00
patrick
4cfd85eb4a esp32/boards: Add board definition for ESP32-S2-WROVER module. 2021-09-19 16:49:35 +10:00
Damien George
80fe25689f esp32/boards: Add new GENERIC_S3 board definition.
Thanks to Seon Rozenblum aka @UnexpectedMaker for the work.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-16 22:58:47 +10:00
Seon Rozenblum
9a7f77bfbc esp32/boards: Add new FeatherS2-Neo board definition. 2021-09-10 15:40:32 +10:00
Patrick Van Oosterwijck
a66bd7a489 esp32/boards: Add GENERIC_C3_USB board with USB serial/JTAG support.
Add a new board type for ESP32-C3 revision 3 and up that implement the USB
serial/JTAG port on pin 18 and 19.  This variant uses the USB serial for
programming and console, leaving the UART free.

- Pins 18 and 19 are correctly reserved for this variant.  Also pins 14-17
  are reserved for flash for any ESP32-C3 so they can't be reconfigured
  anymore to crash the system.
- Added usb_serial_jtag.c and .h to implement this interface.
- Interface was tested to work correctly together with webrepl.
- Interface was tested to work correctly when sending and receiving
  large files with ampy.
- Disconnecting terminal or USB will not hang the system when it's
  trying to print.
2021-08-31 00:12:41 +10:00
Jim Mussared
62fd450e62 drivers/neopixel: Add common machine.bitstream-based neopixel module.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Patrick Van Oosterwijck
028fc815cd esp32/boards: Add Silicognition wESP32 board configuration.
For rev 7+ boards with 16MB of flash.  Partition table allocates 2.4 MiB
for MicroPython, 11 MiB for the filesystem.
2021-08-07 12:50:13 +10:00
Damien George
c77225ae5b esp32/boards/GENERIC_C3: Add generic C3-based board.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 23:58:24 +10:00
Damien George
bbf9dd849a esp32/boards/sdkconfig.base: Disable MEMPROT_FEATURE to alloc from IRAM.
Dynamically generate/loaded native code (eg from @micropython.native or
native .mpy files) needs to be able allocate from IRAM, and the memory
protection feature must be disabled for that to work.  Disabling it is
needed to get native code working on ESP32-S2 and -C3.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-20 22:54:20 +10:00
IAMLIUBO
a18f695e29 esp32/boards: Add M5STACK_ATOM board definition.
ATOM is a very small ESP32 development board produced by M5Stack, with a
size of 24mm * 24mm, with peripherals such as WS2812, IR, button, MPU6886
(Only Matrix), and 8 GPIO extensions.  It also has a plastic shell.
2021-05-30 23:15:13 +10:00
Damien George
db8704ecbd esp8266,esp32: Update manifest to point to new dirs in micropython-lib.
Following a refactoring of micropython-lib.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-28 18:32:56 +10:00
Mike Causer
605b74f390 esp32/boards: Fix spelling mistakes in comments for UM_xxx boards. 2021-05-14 22:26:29 +10:00
Mike Causer
9e65662a11 esp32/boards: Set default I2C and SPI pins on UM_xxx boards.
And fix incorrect I2C and SPI pins in the feathers2 module.
2021-05-14 22:26:05 +10:00
Chris Greening
cce7096d1a esp32/boards/UM_TINYPICO: Fix include of sdkconfig fragment.
This was broken by 32ec07a350
2021-05-11 09:36:41 +10:00
Damien George
0e87459e2b esp32/boards: Add UM_FEATHERS2 and UM_TINYS2 board definitions.
Based on original commit made by Seon Rozenblum aka @UnexpectedMaker.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-10 16:56:53 +10:00
Seon Rozenblum
32ec07a350 esp32/boards: Rename TINYPICO board to UM_TINYPICO.
And add default hardware SPI 0 pins in mpconfigboard.h, and
CONFIG_LWIP_LOCAL_HOSTNAME in sdkconfig.board.
2021-05-10 16:56:53 +10:00
Damien George
5093d49fae esp32: Extend support for S2 series, and S3 where applicable.
Improvements made:
- PSRAM support for S2
- partition definition for 16MiB flash
- correct ADC and DAC pins
- correct GPIO and IRQ pins
- S3 components in CMakeLists

Based on original commit made by Seon Rozenblum aka @UnexpectedMaker.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-10 16:56:53 +10:00
Steve App
21fee92be6 esp32: Restore FROZEN_MANIFEST support with new CMake build system.
This commit re-enables the command-line make option "FROZEN_MANIFEST".  The
boards/*/mpconfigboard.cmake will now use the command-line FROZEN_MANIFEST
value if supplied.

Usage: make FROZEN_MANIFEST=~/foo/my-manifest.py
2021-04-29 12:34:00 +10:00
Damien George
d97b8daf1a esp32/boards: Add GENERIC_S2 board definition.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 10:31:06 +10:00
Damien George
c81d048bb3 esp32: Add support for USB with CDC ACM.
The REPL will be available on the USB serial port.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 10:31:06 +10:00
Damien George
66a86a0615 esp32: Add initial support for ESP32S2 SoCs.
Builds against IDF v4.3-beta2.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 10:31:06 +10:00
Damien George
466ad35a72 esp32/boards: Enable size optimisation for builds.
This enables -Os for compilation, but still keeps full assertion messages.
With IDF v4.2, -Os changes the GENERIC firmware size from 1512176 down to
1384640, and the GENERIC_SPIRAM firmware is now 1452320 which fits in the
allocated partition.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-19 10:42:16 +11:00
Damien George
da2b5fa1c1 esp32/boards: Enable BLE on all boards.
BLE was enabled by default on all boards in the existing make build.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 16:40:07 +11:00
Damien George
26b17fd28a esp32/boards: Remove old IDF v3 sdkconfig values.
IDF v3 is no longer supported with the move to cmake.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 16:40:03 +11:00
Damien George
9f035d6bb7 esp32: Remove traditional "make" capability.
It's now replaced by cmake/idf.py.  But a convenience Makefile is still
provided with traditional targets like "all" and "deploy".

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 16:37:58 +11:00
Damien George
9b90882146 esp32: Add support to build using IDF with cmake.
This commit adds support for building the esp32 port with cmake, and in
particular it builds MicroPython as a component within the ESP-IDF.  Using
cmake and the ESP-IDF build infrastructure makes it much easier to maintain
the port, especially with the various new ESP32 MCUs and their required
toolchains.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 12:48:39 +11:00
Jim Mussared
52d6eeb409 esp32/boards/sdkconfig.base: Set default IDF log level to ERROR.
This commit changes the default logging level on all esp32 boards to ERROR.
The esp32 port is now stable enough that it makes sense to remove the info
logs to make the output cleaner, and to match other ports.  More verbose
logging can always be reenabled via esp.osdebug().

This also fixes issue #6354, error messages from NimBLE: the problem is
that ble.active(True) will cause the IDF's NimBLE port to reset the
"NimBLE" tag back to the default level (which was INFO prior to this
commit).  Even if the user had previously called esp.osdebug(None), because
the IDF is setting the "NimBLE" tag back to the default (INFO), the
messages will continue to be shown.

The one quirk is that if the user does want to see the additional logging,
then they must call esp.osdebug(0, 3) after ble.active(True) to undo the
IDF setting the level back to the default (now ERROR).  This means that
it's impossible (via Python/esp.osdebug) to see stack-startup logging,
you'd have to recompile with the default level changed back to INFO.
2020-09-18 15:53:56 +10:00
Jim Mussared
311b8519af esp32: Pin MicroPython and NimBLE tasks to core 0.
MicroPython and NimBLE must be on the same core, for synchronisation of the
BLE ringbuf and the MicroPython scheduler.  However, in the current IDF
versions (3.3 and 4.0) there are issues (see e.g. #5489) with running
NimBLE on core 1.

This change - pinning both tasks to core 0 - makes it possible to reliably
run the BLE multitests on esp32 boards.
2020-09-08 12:53:24 +10:00
Thorsten von Eicken
952ff8a8ea esp32: Improve support for OTA updates.
This commit adds several small items to improve the support for OTA
updates on an esp32:

- a partition table for 4MB flash modules that has two OTA partitions ready
  to go to do updates
- a GENERIC_OTA board that uses that partition table and that enables
  automatic roll-back in the bootloader
- a new esp32.Partition.mark_app_valid_cancel_rollback() class-method to
  signal that the boot is successful and should not be rolled back at the
  next reset
- an automated test for doing an OTA update
- documentation updates
2020-05-03 15:00:45 +10:00
Damien George
ad004db662 esp32: Enable and freeze uasyncio. 2020-03-26 01:25:46 +11:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Jim Mussared
3032ae1155 esp32: Enable NimBLE support on all builds (IDF 3.3 and 4.0).
This commit updates the IDFv3 version to v3.3.1, and enables the
"ubluetooth" module by default on IDFv3 builds.
2020-01-15 00:24:43 +11:00
Jim Mussared
7ce1e0b1dc extmod/webrepl: Move webrepl scripts to common place and use manifest.
Move webrepl support code from ports/esp8266/modules into extmod/webrepl
(to be alongside extmod/modwebrepl.c), and use frozen manifests to include
it in the build on esp8266 and esp32.

A small modification is made to webrepl.py to make it work on non-ESP
ports, i.e. don't call dupterm_notify if not available.
2019-12-20 12:59:13 +11:00
Seon Rozenblum
0d82f5d8c8 esp32/boards/TINYPICO: Add tinypico.py, dotstar.py with custom manifest. 2019-12-19 10:05:01 +11:00
Andrew Leech
9ca8a503ed esp32/boards: Enable ULP in base sdk configuration.
Fixes issue #5159.
2019-12-05 15:28:56 +11:00
Jim Mussared
71299d3224 esp32/boards/sdkconfig.base: Resize SSL output buffer from 16 to 4kiB.
The IDF heap is more fragmented with IDF 4 and mbedtls cannot allocate
enough RAM with 16+16kiB for both in and out buffers, so reduce output
buffer size.

Fixes issue #5303.
2019-11-11 11:55:58 +11:00
Jim Mussared
912892b209 esp32: Add missing and necessary newline at EOF for sdkconfig.240mhz.
When these files get concatenated the newline-at-EOF is necessary so that
the start of the next file doesn't join with the end of the previous.
2019-10-21 23:54:59 +11:00
Jim Mussared
8ba963cfa3 tools/makemanifest.py: Eval relative paths w.r.t. current manifest file.
When loading a manifest file, e.g. by include(), it will chdir first to the
directory of that manifest.  This means that all file operations within a
manifest are relative to that manifest's location.

As a consequence of this, additional environment variables are needed to
find absolute paths, so the following are added: $(MPY_LIB_DIR),
$(PORT_DIR), $(BOARD_DIR).  And rename $(MPY) to $(MPY_DIR) to be
consistent.

Existing manifests are updated to match.
2019-10-21 23:01:41 +11:00
Josh Lloyd
59c1b7d4b8 esp32/boards: Split out CPU frequency config, make 160MHz the default.
Remove the 240MHz CPU config option from sdkconfig.base and create a new
sdkconfig.240mhz file for those boards that want to use 240MHz on boot.

The default CPU frequency is now 160MHz (was 240MHz), to align with the ESP
IDF and support more boards (eg those with D2WD chips).

Fixes issue #5169.
2019-10-18 13:42:24 +11:00
Damien George
ce1de1faf0 esp32: Convert to use FROZEN_MANIFEST to specify frozen code.
All symlinks are removed.  boards/manifest.py is used as a default, and can
optionally use boards/manifest_release.py for more scripts.
2019-10-15 21:37:02 +11:00