Commit Graph

118 Commits

Author SHA1 Message Date
Damien George
87fbceef26 stm32/mboot: Pass initial_r0 to early-init and get-reset-mode funcs.
This allows a board to modify initial_r0 if needed.

Also make default board behaviour functions always available, named as
mboot_get_reset_mode_default and mboot_state_change_default.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George
e64947dc90 stm32/mboot: Make 0x70ad0000 values named constants with macros.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George
9246099935 stm32/mboot: Add update_app_elements to return mboot fsload elements.
In case the elements should not be passed directly to machine.bootloader.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George
1296a01f4c stm32/mboot: Move remaining led_state_all call into mboot_state_change.
This was missed in b2deea6762

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George
5c32111fa0 ports: Reformat more C and Python source code.
These files that are reformatted only now fall under the list of files to
apply uncrustify/black formatting to.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-20 16:17:35 +10:00
Damien George
cb0372b5bf stm32/mboot: Add macros for use in led_state_all().
Signed-off-by: Damien George <damien@micropython.org>
2022-04-11 15:52:41 +10:00
Damien George
b2deea6762 stm32/mboot: Consolidate all UI and add general state change hooks.
All user interface (LED, button) code has been moved to ui.c, and the
interface to this code with the rest of the system now goes through calls
to mboot_state_change().  This state-change function can be overridden by a
board to fully customise the user interface behaviour.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-11 15:52:41 +10:00
Andrew Leech
bb0ca00b77 stm32/mboot: Verify CRC32 of fsload DFU files before writing. 2022-03-22 15:04:41 +11:00
Andrew Leech
bc856a1e29 stm32/mboot: Verify signature of fsload packed DFU files before writing.
When verifying the DFU contents, the signature of signed/encrypted files is
also now checked in this initial, dry-run stage.
2022-03-22 15:04:37 +11:00
Damien George
80055c2cdc stm32/mboot/fwupdate.py: Simplify calculation of CRC32.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 14:14:31 +11:00
Damien George
e316306546 stm32/mboot: Add support for reading from SD card.
Tested on PYBV10 and PYBD_SF6, with MBOOT_FSLOAD enabled and programming
new firmware from a .dfu.gz file stored on the SD card.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 13:33:43 +11:00
Damien George
9b07d38c7e stm32/mboot: Add support for 64-bit mboot address space for reads.
If enabled via MBOOT_ADDRESS_SPACE_64BIT (it's disabled by default) then
read addresses will be 64-bit.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 13:33:43 +11:00
Damien George
a92d45c3df stm32/mboot: Always check the magic number to enter filesystem loading.
Even if MBOOT_FSLOAD is disabled, mboot should still check for 0x70ad0080
so it can immediately return to the application if this feature is not
enabled.  Otherwise mboot will get stuck in DFU mode.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 12:49:00 +11:00
Damien George
dc91024a73 stm32/mboot: Add pragma for GCC to ignore array bounds warning.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 12:44:10 +11:00
Damien George
5995fb5261 stm32/mboot: Allow a board more control over entry initialisation.
If MBOOT_BOARD_ENTRY_INIT is defined by a board then that function must now
make sure system clocks are configured, eg by calling mboot_entry_init().

Signed-off-by: Damien George <damien@micropython.org>
2022-02-18 14:59:35 +11:00
Damien George
2b62f12103 stm32/mboot: Allow a board to fully configure system clocks.
If a board wants to customise the clocks it can define the following:

    MBOOT_CLK_PLLM
    MBOOT_CLK_PLLN
    MBOOT_CLK_PLLP
    MBOOT_CLK_PLLQ
    MBOOT_CLK_PLLR (only needed on STM32H7)
    MBOOT_FLASH_LATENCY
    MBOOT_CLK_AHB_DIV
    MBOOT_CLK_APB1_DIV
    MBOOT_CLK_APB2_DIV
    MBOOT_CLK_APB3_DIV (only needed on STM32H7)
    MBOOT_CLK_APB4_DIV (only needed on STM32H7)

Signed-off-by: Damien George <damien@micropython.org>
2022-02-18 14:51:01 +11:00
Damien George
9127e63708 stm32/Makefile: Make stm32lib configurable.
The default stm32lib remains lib/stm32lib, but it can now be easily
overriden at build time by specifying STM32LIB_DIR, or STM32LIB_CMSIS_DIR
and STM32LIB_HAL_DIR.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-04 09:43:43 +11:00
Damien George
26faf74d52 stm32/mboot: Add support for F469/479 MCUs in fwupdate.py.
And don't assert on the sector number in sector_erase, so it can support
erasing arbitrary sectors.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-03 13:21:57 +11:00
Damien George
4f918f4b26 stm32/mboot: Add MBOOT_BOARD_ENTRY_INIT for a board to add entry code.
Also change the signature of stm32_main to uint32_t, which is what it
should be.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-03 13:20:51 +11:00
Damien George
b8d55d4c52 stm32/mboot: Allow HSI to be used as the main clock source.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-03 13:20:22 +11:00
Damien George
60e05ae84e stm32/mboot: Compute and check CRC32 of dfu file in fwupdate.py.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-31 18:49:08 +11:00
Damien George
ca1914fb47 stm32/mboot: Support H7 MCUs in fwupdate.py.
And optimise the speed of flash writing.

Signed-off-by: Damien George <damien@micropython.org>
2022-01-31 18:26:55 +11:00
Damien George
29867a2439 stm32/mboot: Include hal_rcc_ex.c in source file list.
It's needed at least on F4 because this file overrides the weak function
HAL_RCC_DeInit() from hal_rcc.c.

Signed-off-by: Damien George <damien@micropython.org>
2022-01-31 18:26:55 +11:00
Damien George
c8c229b96c stm32/mboot: Use PLL3 for USB clock source on H7 MCUs.
PLL3-Q is more reliable than PLL1-Q for the USB clock source when entering
mboot from various reset states (eg power on vs MCU reset).  (It was found
that if the main application used PLL3-Q then sometimes the USB clock
source would stay stuck on PLL3-Q and not switch to PLL1-Q after a reset.)

Other related changes:
- SystemCoreClockUpdate() should be called on H7 because the calculation
  can be involved in some cases.
- __set_PRIMASK(0) should be called because on H7 the built-in ST DFU
  bootloader exits with IRQs disabled.

Signed-off-by: Damien George <damien@micropython.org>
2022-01-31 18:26:55 +11:00
Damien George
608d421752 stm32/mboot: Remove custom HAL_RCC_GetHCLKFreq and use HAL provided one.
So that a board can access other HAL_RCC functions if it needs them (this
was not possible previously by just adding hal_rcc.c to the src list for a
board because it would clash with the custom HAL_RCC_GetHCLKFreq function).

Signed-off-by: Damien George <damien@micropython.org>
2022-01-20 16:08:17 +11:00
Jan Hrudka
d451dc0086 stm32: Add basic support for STM32H750. 2021-09-15 10:42:20 +10:00
Damien George
136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Damien George
925878b2f8 ports: Update for move of crypto-algorithms, uzlib to lib.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 16:37:20 +10:00
Damien George
ea81bcf1c0 stm32/mboot: Leave bootloader from thread mode, not from IRQ.
Leaving the bootloader from an IRQ (eg USB or I2C IRQ) will not work if
MBOOT_LEAVE_BOOTLOADER_VIA_RESET is disabled, ie if mboot jumps directly to
the application.  This is because the CPU will still be in IRQ state when
the application starts and IRQs of lower priority will be blocked.

Fix this by setting a flag when the bootloader should finish, and exit the
bootloader always from the main (top level) thread.

This also improves the USB behaviour of mboot: it no longer abruptly
disconnects when the manifest command is sent.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-21 00:46:01 +10:00
Damien George
9a0bca2c2a stm32/mboot: Make LEDs and reset-mode selection more configurable.
A board can now customise mboot with:
- MBOOT_LED1, MBOOT_LED2, MBOOT_LED3, MBOOT_LED4: if it needs to have
  different LEDs for mboot compared to the application
- MBOOT_BOARD_LED_INIT: if it needs a fully customised LED init function
- MBOOT_BOARD_LED_STATE: if it needs a fully customised LED state-setting
  function
- MBOOT_BOARD_GET_RESET_MODE: if it needs a fully customised function to
  get the reset mode

With full customisation, the only requirement is a single LED to show the
status of the bootloader (idle, erasing, flashing, etc), which can be
configured to do nothing if needed.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-12 13:44:57 +10:00
Damien George
6639e282c7 stm32/mboot: Add MBOOT_LEAVE_BOOTLOADER_VIA_RESET option.
It is enabled by default to get the standard behaviour of doing a reset
after it is finished, but can be disabled by a board to jump straight to
the application (likely the board needs to use MBOOT_BOARD_CLEANUP to make
this work).

The application is passed a reset mode of BOARDCTRL_RESET_MODE_BOOTLOADER
if the bootloader was active and entered via a jump.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-12 13:44:52 +10:00
Damien George
37494b8c8a stm32/mboot: Allow mboot to be placed at any location in flash.
A board can now define MBOOT_TEXT0_ADDR to place mboot at a location other
than 0x08000000.  This can be useful if, for example, there is already a
different bootloader on the device.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:42:59 +10:00
Damien George
58be5a5aa3 stm32/mboot: Allow a board to customise the linker scripts.
A board can now define MBOOT_LD_FILES (at the Makefile-level) to specify
custom linker scripts.  And stm32_generic.ld has been split into 2 pieces
so one or the other can be reused (usually stm32_sections.ld wolud be
reused by a board, and stm32_memory.ld redefined).

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:42:59 +10:00
Damien George
97f09fda3e stm32/mboot: Fix mp_hal_delay_us() and add mp_hal_ticks_ms().
Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:42:59 +10:00
Damien George
fd01b6c779 stm32/adc: Allow mboot to use basic ADC functions.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:42:59 +10:00
Damien George
ef2896bdea stm32/mboot: Allow a board to add source files to the build.
A board can now use BUILDING_MBOOT at the Makefile-level to do things
conditional on building mboot, for example add source files to SRC_C.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:42:59 +10:00
Damien George
a72b8443ca stm32/boardctrl: Add constants for reset mode values.
And use the same boardctrl.h header for both the application and mboot so
these constants are consistent.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:31:35 +10:00
plan-do-break-fix
4dc802400f stm32,teensy: Correct typos in project README files. 2021-04-28 00:29:18 +10:00
David Michieli
5669a60954 stm32/mboot: Allow unpacking dfu without secret key.
- unpack-dfu command no longer requies a secret key to be present
- pack-dfu command raises an exception if no secret key is found
2021-04-23 11:04:37 +10:00
Damien George
d4b45898f5 stm32/mboot: After sig verify, only write firmware-head if latter valid.
So that mboot can be used to program encrypted/signed firmware to regions
of flash that are not the main application, eg that are the filesystem.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-18 13:59:03 +11:00
David Michieli
2eed9780ba stm32/mboot: Add unpack-dfu command to mboot_pack_dfu.py tool.
This command unpacks a previously packed DFU file, writing out a DFU which
should be the same as the original (before packing).
2021-02-17 11:36:44 +11:00
Andrew Leech
5ef71cd167 stm32/mboot: Change debug compiler optimisation from -O0 to -Og.
With mboot encrpytion and fsload enabled, the DEBUG build -O0 compiler
settings result in mboot no longer fitting in the 32k sector.  This commit
changes this to -Og which also brings it into line with the regular stm32
build.
2021-02-02 21:25:13 +11:00
Damien George
8f211df360 stm32/mboot/fwupdate.py: Refactor update_mpy with support for STATUS.
Changes are:
- refactor to use new _create_element function
- support extended version of MOUNT element with block size
- support STATUS element

Signed-off-by: Damien George <damien@micropython.org>
2021-01-29 15:02:55 +11:00
Damien George
bd7110a3d5 stm32/mboot: Introduce MBOOT_ERRNO_xxx constants and use them.
So that a failed update via fsload can be more easily diagnosed.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-29 15:02:55 +11:00
Damien George
0efa0b5437 stm32/mboot: Add ELEM_TYPE_STATUS element so application can get status.
This new element takes the form: (ELEM_TYPE_STATUS, 4, <address>).  If this
element is present in the mboot command then mboot will store to the given
address the result of the filesystem firmware update process.  The address
can for example be an RTC backup register.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-29 15:02:55 +11:00
Damien George
c1eb292927 stm32/mboot: Don't auto-detect littlefs block size.
Instead it is now passed in as an optional parameter to the ELEM_MOUNT
element, with a compile-time configurable default.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-29 15:02:55 +11:00
Damien George
c6f334272a stm32/mboot: Add support for signed and encrypted firmware updates.
This commit adds support to stm32's mboot for signe, encrypted and
compressed DFU updates.  It is based on inital work done by Andrew Leech.

The feature is enabled by setting MBOOT_ENABLE_PACKING to 1 in the board's
mpconfigboard.mk file, and by providing a header file in the board folder
(usually called mboot_keys.h) with a set of signing and encryption keys
(which can be generated by mboot_pack_dfu.py).  The signing and encryption
is provided by libhydrogen.  Compression is provided by uzlib.  Enabling
packing costs about 3k of flash.

The included mboot_pack_dfu.py script converts a .dfu file to a .pack.dfu
file which can be subsequently deployed to a board with mboot in packing
mode.  This .pack.dfu file is created as follows:
- the firmware from the original .dfu is split into chunks (so the
  decryption can fit in RAM)
- each chunk is compressed, encrypted, a header added, then signed
- a special final chunk is added with a signature of the entire firmware
- all chunks are concatenated to make the final .pack.dfu file

The .pack.dfu file can be deployed over USB or from the internal filesystem
on the device (if MBOOT_FSLOAD is enabled).

See #5267 and #5309 for additional discussion.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-18 12:43:01 +11:00
Damien George
09e67de327 stm32/mboot/gzstream: Fix lost data decompressing final part of file.
Prior to this fix, the final piece of data in a compressed file may have
been lost when decompressing.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-18 12:43:01 +11:00
Damien George
460a181b77 stm32/mboot: Enable LFS2_READONLY for mboot builds with littlefs.
To reduce code size, since mboot does not modify the filesystem.

Signed-off-by: Damien George <damien@micropython.org>
2020-12-09 13:19:31 +11:00
Jim Mussared
119c88ef17 stm32/flash: Implement WB55 flash locking.
This is needed to moderate concurrent access to the internal flash, as
while an erase/write is in progress execution will stall on the wireless
core due to the bus being locked.

This implements Figure 10 from AN5289 Rev 3.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-16 17:08:30 +11:00