Commit Graph

36 Commits

Author SHA1 Message Date
stephanelsmith
633599cdd5 tests/run-tests.py: Capture output of stderr when running on CPython.
Signed-off-by: stephanelsmith <stephane.smith@titansensor.com>
2023-09-01 17:39:19 +10:00
Jim Mussared
add1200343 all: Remove the zlib module.
This will be replaced with a new deflate module providing the same
functionality, with an optional frozen Python wrapper providing a
replacement zlib module.

binascii.crc32 is temporarily disabled.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-07-21 18:48:29 +10:00
Jim Mussared
6027c41c8f tests: Rename uasyncio to asyncio.
This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-19 17:33:03 +10:00
Jim Mussared
4216bc7d13 tests: Replace umodule with module everywhere.
This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:24 +10:00
Jim Mussared
17127bbee5 tests/run-tests.py: Ensure correct cwd for mpy tests.
Previously when using --via-mpy, the file was compiled to tests/<tmp>.mpy
and then run using `micropython -m <tmp>` in the current cwd
(usually tests/).  This meant that an import in the test would be resolved
relative to tests/.

This is different to regular (non-via-mpy) tests, where we run (for
example) `micropython basics/test.py` which means that an import would be
resolved relative to basics/.

Now --via-mpy matches the .py behavior.  This is important because:
a) It makes it so import tests do the right thing.
b) There are directory names in tests/ that match built-in module names.

Furthermore, it always ensures the cwd (for both micropython and cpython)
is the test directory (e.g. basics/) rather than being left unset.  This
also makes it clearer inside the test that e.g. file access is relative to
the Python file.

Updated tests with file paths to match.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-05-18 13:48:21 +10:00
Damien George
5c3c1c737e tests/float: Skip new complex tests if complex unavailable.
These complex tests were recently added.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-09 15:20:00 +11:00
Damien Tournoud
ed58d6e4ce extmod/modussl_mbedtls: Fix support for ioctl(MP_STREAM_POLL).
During the initial handshake or subsequent renegotiation, the protocol
might need to read in order to write (or conversely to write in order
to read). It might be blocked from doing so by the state of the
underlying socket (i.e. there is no data to read, or there is no space
to write).

The library indicates this condition by returning one of the errors
`MBEDTLS_ERR_SSL_WANT_READ` or `MBEDTLS_ERR_SSL_WANT_WRITE`. When that
happens, we need to enforce that the next poll operation only considers
the direction that the library indicated.

In addition, mbedtls does its own read buffering that we need to take
into account while polling, and we need to save the last error between
read()/write() and ioctl().
2022-12-15 12:06:22 -08:00
stijn
9c7ff87643 all: Keep msvc build output in build/ directories.
This follow the change made for Makefile-based projects in b2e82402.
2022-12-13 17:18:53 +11:00
Jim Mussared
4ff10b5976 tests/run-tests.py: Use host arch for mpy-cross for target=unix.
This will make mpy-cross auto-detect. Allow overriding for non-default
configurations (e.g. using 32-bit build of the unix port).

Also use armv7m by default for qemu-arm (the default qemu target is
Cortex-M3).

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-11-17 23:03:02 +11:00
Angus Gratton
f91ebf6fa9 tests: Allow 'special' tests to output "SKIP" on a single line. 2022-09-23 16:02:59 +10:00
Daniel Jour
c7aa6a2c73 tests/run-tests.py: Provide better default MPYCROSS value for Windows. 2022-08-11 13:34:04 +10:00
Daniel Jour
47c84286e8 all: Fix paths to mpy-cross and micropython binaries.
Binaries built using the Make build system now no longer appear in the
working directory of the build, but rather in the build directory.  Thus
some paths had to be adjusted.
2022-08-11 13:31:13 +10:00
Dan Ellis
f9cbe6bc47 py/formatfloat: Format all whole-number floats exactly.
Formerly, py/formatfloat would print whole numbers inaccurately with
nonzero digits beyond the decimal place.  This resulted from its strategy
of successive scaling of the argument by 0.1 which cannot be exactly
represented in floating point.  The change in this commit avoids scaling
until the value is smaller than 1, so all whole numbers print with zero
fractional part.

Fixes issue #4212.

Signed-off-by: Dan Ellis dan.ellis@gmail.com
2022-07-26 22:23:47 +10:00
Andrew Leech
1e87b56219 py/obj: Add support for __float__ and __complex__ functions. 2022-07-25 14:23:34 +10:00
Damien George
e22b7fb4af py/objfun: Support function attributes on native functions.
Native functions can just reuse the bytecode function attribute code.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-25 00:22:15 +10:00
Damien George
065df5568c tests: Move native while test from pybnative to micropython.
And make it so this test can run on any target.

LED and time testing has been removed from this test, that can now be
tested using: ./run-tests.py --via-mpy --emit native.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-26 12:54:43 +10:00
Damien George
20d9f3409a tests/run-tests.py: Add rp2 test target.
Signed-off-by: Damien George <damien@micropython.org>
2022-05-26 12:54:43 +10:00
David Lechner
d42d35f56d tests/run-tests.py: Enable -X realtime option for macOS tests.
This enables the new `-X realtime` runtime option when running tests on
macOS.  This causes MicroPython to configure all threads to be high
priority so that they are allowed to use high precision timers.  This
makes tests that depend on the passage of time more likely to succeed.

CI tests that were disabled because of this are now enabled again.

Signed-off-by: David Lechner <david@pybricks.com>
2022-05-24 00:52:44 +10:00
Damien George
7d3204783a tests/run-tests.py: Handle case where mpy-cross fails to compile script.
Signed-off-by: Damien George <damien@micropython.org>
2022-05-23 15:45:21 +10:00
Damien George
1786dacc83 tests/run-tests.py: Allow running tests via mpy-cross on remote targets.
This adds support for the `--via-mpy` and `--emit native` options when
running tests on remote targets (via pyboard.py).  It's now possible to do:

    $ ./run-tests.py --target pyboard --via-mpy
    $ ./run-tests.py --target pyboard --via-mpy --emit native

Signed-off-by: Damien George <damien@micropython.org>
2022-05-19 17:31:56 +10:00
Damien George
ab0a8f3086 tests/run-tests.py: Exclude settrace tests when using native emitter.
Signed-off-by: Damien George <damien@micropython.org>
2022-05-17 14:25:51 +10:00
Takeo Takahashi
3717d599e2 tests/run-tests.py: Update for renesas-ra port.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
2022-04-29 12:29:08 +09:00
Damien George
8631753ff4 tests/run-tests.py: Add timeout for running PC-based MicroPython test.
So the test suite runs to completion, even if the interpreter locks up.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-21 14:25:17 +10:00
Damien George
538c3c0a55 py: Change jump opcodes to emit 1-byte jump offset when possible.
This commit introduces changes:

- All jump opcodes are changed to have variable length arguments, of either
  1 or 2 bytes (previously they were fixed at 2 bytes).  In most cases only
  1 byte is needed to encode the short jump offset, saving bytecode size.

- The bytecode emitter now selects 1 byte jump arguments when the jump
  offset is guaranteed to fit in 1 byte.  This is achieved by checking if
  the code size changed during the last pass and, if it did (if it shrank),
  then requesting that the compiler make another pass to get the correct
  offsets of the now-smaller code.  This can continue multiple times until
  the code stabilises.  The code can only ever shrink so this iteration is
  guaranteed to complete.  In most cases no extra passes are needed, the
  original 4 passes are enough to get it right by the 4th pass (because the
  2nd pass computes roughly the correct labels and the 3rd pass computes
  the correct size for the jump argument).

This change to the jump opcode encoding reduces .mpy files and RAM usage
(when bytecode is in RAM) by about 2% on average.

The performance of the VM is not impacted, at least within measurment of
the performance benchmark suite.

Code size is reduced for builds that include a decent amount of frozen
bytecode.  ARM Cortex-M builds without any frozen code increase by about
350 bytes.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-28 15:41:38 +11:00
Damien George
ac2293161e py/modsys: Add optional mutable attributes sys.ps1/ps2 and use them.
This allows customising the REPL prompt strings.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 10:58:33 +11:00
Damien George
cac939ddc3 py/modsys: Add optional sys.tracebacklimit attribute.
With behaviour as per CPython.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 10:43:21 +11:00
Damien George
9a8ee6a5df tests/run-tests.py: Include test files ending in _set as set tests.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-07 16:48:35 +11:00
stijn
ff9c708507 tests/run-tests.py: Skip repl tests when running windows underneath.
Some versions of Python (for instance: the mingw-w64 version which can be
installed on MSYS2) do include a pty module and claim to be posix-like
(os.name == 'posix'), yet the select.select call used in run-tests.py hangs
forever.  To be on the safe side just exclude anything which might be
running on windows.
2022-02-18 15:14:47 +11:00
Damien George
aac5a97d08 ports: Move '.frozen' to second entry in sys.path.
In commit 86ce442607 the '.frozen' entry was
added at the start of sys.path, to allow control over when frozen modules
are searched during import, and retain existing behaviour whereby frozen
was searched before the filesystem.

But Python semantics of sys.path require sys.path[0] to be the directory of
the currently executing script, or ''.

This commit moves the '.frozen' entry to second place in sys.path, so
sys.path[0] retains its correct value (described above).

Signed-off-by: Damien George <damien@micropython.org>
2021-12-29 23:55:36 +11:00
Jim Mussared
b326edf68c all: Remove MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE.
This commit removes all parts of code associated with the existing
MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE optimisation option, including the
-mcache-lookup-bc option to mpy-cross.

This feature originally provided a significant performance boost for Unix,
but wasn't able to be enabled for MCU targets (due to frozen bytecode), and
added significant extra complexity to generating and distributing .mpy
files.

The equivalent performance gain is now provided by the combination of
MICROPY_OPT_LOAD_ATTR_FAST_PATH and MICROPY_OPT_MAP_LOOKUP_CACHE (which has
been enabled on the unix port in the previous commit).

It's hard to provide precise performance numbers, but tests have been run
on a wide variety of architectures (x86-64, ARM Cortex, Aarch64, RISC-V,
xtensa) and they all generally agree on the qualitative improvements seen
by the combination of MICROPY_OPT_LOAD_ATTR_FAST_PATH and
MICROPY_OPT_MAP_LOOKUP_CACHE.

For example, on a "quiet" Linux x64 environment (i3-5010U @ 2.10GHz) the
change from CACHE_MAP_LOOKUP_IN_BYTECODE, to LOAD_ATTR_FAST_PATH combined
with MAP_LOOKUP_CACHE is:

diff of scores (higher is better)
N=2000 M=2000       bccache -> attrmapcache      diff      diff% (error%)
bm_chaos.py        13742.56 ->   13905.67 :   +163.11 =  +1.187% (+/-3.75%)
bm_fannkuch.py        60.13 ->      61.34 :     +1.21 =  +2.012% (+/-2.11%)
bm_fft.py         113083.20 ->  114793.68 :  +1710.48 =  +1.513% (+/-1.57%)
bm_float.py       256552.80 ->  243908.29 : -12644.51 =  -4.929% (+/-1.90%)
bm_hexiom.py         521.93 ->     625.41 :   +103.48 = +19.826% (+/-0.40%)
bm_nqueens.py     197544.25 ->  217713.12 : +20168.87 = +10.210% (+/-3.01%)
bm_pidigits.py      8072.98 ->    8198.75 :   +125.77 =  +1.558% (+/-3.22%)
misc_aes.py        17283.45 ->   16480.52 :   -802.93 =  -4.646% (+/-0.82%)
misc_mandel.py     99083.99 ->  128939.84 : +29855.85 = +30.132% (+/-5.88%)
misc_pystone.py    83860.10 ->   82592.56 :  -1267.54 =  -1.511% (+/-2.27%)
misc_raytrace.py   21490.40 ->   22227.23 :   +736.83 =  +3.429% (+/-1.88%)

This shows that the new optimisations are at least as good as the existing
inline-bytecode-caching, and are sometimes much better (because the new
ones apply caching to a wider variety of map lookups).

The new optimisations can also benefit code generated by the native
emitter, because they apply to the runtime rather than the generated code.
The improvement for the native emitter when LOAD_ATTR_FAST_PATH and
MAP_LOOKUP_CACHE are enabled is (same Linux environment as above):

diff of scores (higher is better)
N=2000 M=2000        native -> nat-attrmapcache  diff      diff% (error%)
bm_chaos.py        14130.62 ->   15464.68 :  +1334.06 =  +9.441% (+/-7.11%)
bm_fannkuch.py        74.96 ->      76.16 :     +1.20 =  +1.601% (+/-1.80%)
bm_fft.py         166682.99 ->  168221.86 :  +1538.87 =  +0.923% (+/-4.20%)
bm_float.py       233415.23 ->  265524.90 : +32109.67 = +13.756% (+/-2.57%)
bm_hexiom.py         628.59 ->     734.17 :   +105.58 = +16.796% (+/-1.39%)
bm_nqueens.py     225418.44 ->  232926.45 :  +7508.01 =  +3.331% (+/-3.10%)
bm_pidigits.py      6322.00 ->    6379.52 :    +57.52 =  +0.910% (+/-5.62%)
misc_aes.py        20670.10 ->   27223.18 :  +6553.08 = +31.703% (+/-1.56%)
misc_mandel.py    138221.11 ->  152014.01 : +13792.90 =  +9.979% (+/-2.46%)
misc_pystone.py    85032.14 ->  105681.44 : +20649.30 = +24.284% (+/-2.25%)
misc_raytrace.py   19800.01 ->   23350.73 :  +3550.72 = +17.933% (+/-2.79%)

In summary, compared to MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE, the new
MICROPY_OPT_LOAD_ATTR_FAST_PATH and MICROPY_OPT_MAP_LOOKUP_CACHE options:
- are simpler;
- take less code size;
- are faster (generally);
- work with code generated by the native emitter;
- can be used on embedded targets with a small and constant RAM overhead;
- allow the same .mpy bytecode to run on all targets.

See #7680 for further discussion.  And see also #7653 for a discussion
about simplifying mpy-cross options.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-09-16 16:04:03 +10:00
Jim Mussared
692d36d779 py: Implement partial PEP-498 (f-string) support.
This implements (most of) the PEP-498 spec for f-strings and is based on
https://github.com/micropython/micropython/pull/4998 by @klardotsh.

It is implemented in the lexer as a syntax translation to `str.format`:
  f"{a}" --> "{}".format(a)

It also supports:
  f"{a=}" --> "a={}".format(a)

This is done by extracting the arguments into a temporary vstr buffer,
then after the string has been tokenized, the lexer input queue is saved
and the contents of the temporary vstr buffer are injected into the lexer
instead.

There are four main limitations:
- raw f-strings (`fr` or `rf` prefixes) are not supported and will raise
  `SyntaxError: raw f-strings are not supported`.

- literal concatenation of f-strings with adjacent strings will fail
    "{}" f"{a}" --> "{}{}".format(a)    (str.format will incorrectly use
                                         the braces from the non-f-string)
    f"{a}" f"{a}" --> "{}".format(a) "{}".format(a) (cannot concatenate)

- PEP-498 requires the full parser to understand the interpolated
  argument, however because this entirely runs in the lexer it cannot
  resolve nested braces in expressions like
    f"{'}'}"

- The !r, !s, and !a conversions are not supported.

Includes tests and cpydiffs.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-14 16:58:40 +10:00
Jeff Epler
94a3f8a4b0 tests/run-tests.py: Parallelize running tests by default.
This significantly reduces the time taken to run the test suite (on the
unix port).  Use `-j1` to disable this feature.

Signed-off-by: Jeff Epler <jepler@gmail.com>
2021-05-14 11:33:31 +10:00
Damien George
8459f538eb tests/feature_check: Check for lack of pass result rather than failure.
Commit cb68a5741a broke automatic Python
feature detection when running tests, because some detection relied on a
crash of a feature script returning exactly b"CRASH".

This commit fixes this and improves the situation by testing for the lack
of a known pass result, rather than an exact failure result.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 00:52:56 +10:00
Damien George
cb68a5741a tests/run-tests.py: Provide more info if script run via pyboard crashes.
Signed-off-by: Damien George <damien@micropython.org>
2021-03-16 14:49:57 +11:00
Damien George
2a38d71036 tests/run-tests.py: Reformat with Black.
Signed-off-by: Damien George <damien@micropython.org>
2021-03-12 19:56:09 +11:00
Damien George
6129b8e401 tests: Rename run-tests to run-tests.py for consistency.
Signed-off-by: Damien George <damien@micropython.org>
2021-03-12 19:56:09 +11:00