Commit Graph

56 Commits

Author SHA1 Message Date
Damien George
e0a0719416 stm32: Add initial support for STM32WL MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-04 09:43:43 +11:00
Damien George
fbd47fc46c ports: Consolidate inclusion of umachine module in built-ins.
The inclusion of `umachine` in the list of built-in modules is now done
centrally in py/objmodule.c.  Enabling MICROPY_PY_MACHINE will include this
module.

As part of this, all ports now have `umachine` as the core module name
(previously some had only `machine` as the name).

Signed-off-by: Damien George <damien@micropython.org>
2022-02-03 10:08:54 +11:00
Herwin Grobben
8f68e26f79 stm32: Add support for G4 MCUs, and add NUCLEO_G474RE board defn.
This commit adds support for the STM32G4 series of MCUs, and a board
definition for NUCLEO_G474RE.  This board has the REPL on LPUART1 which is
connected to the on-board ST-link USB-UART.
2022-02-01 16:21:01 +11:00
David Lechner
86371781e9 tools/uncrustify: Force 1 newline at end of file.
To keep things neat and tidy, we ensure that each file has 1 and only 1
newline at the end of each file.

Signed-off-by: David Lechner <david@pybricks.com>
2021-08-31 13:14:45 +10:00
Jim Mussared
e64cda5295 stm32: Add implementation of machine.bitstream.
Hand-written version for M0, and cycle-counter version for everything else.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Damien George
136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Mike Teachman
8a5bfe44a5 esp32,stm32: Add new machine.I2S class for I2S protocol support.
This commit adds I2S protocol support for the esp32 and stm32 ports, via
a new machine.I2S class.  It builds on the stm32 work of blmorris, #1361.

Features include:
- a consistent I2S API across the esp32 and stm32 ports
- I2S configurations supported:
  - master transmit and master receive
  - 16-bit and 32-bit sample sizes
  - mono and stereo formats
  - sampling frequency
  - 3 modes of operation:
    - blocking
    - non-blocking with callback
    - uasyncio
  - internal ring buffer size can be tuned
- documentation for Pyboards and esp32-based boards
- tested on the following development boards:
  - Pyboard D SF2W
  - Pyboard V1.1
  - ESP32 with SPIRAM
  - ESP32

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-07-05 23:42:25 +10:00
Damien George
37494b8c8a stm32/mboot: Allow mboot to be placed at any location in flash.
A board can now define MBOOT_TEXT0_ADDR to place mboot at a location other
than 0x08000000.  This can be useful if, for example, there is already a
different bootloader on the device.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:42:59 +10:00
Damien George
9b78f3e6c6 stm32: Make pyb, uos, utime, machine and onewire modules configurable.
The default for these is to enable them, but they can now be disabled
individually by a board configuration.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-17 14:42:46 +11:00
iabdalkader
849748873c stm32/modmachine: Add device and revision ids to machine.info(). 2020-12-07 16:39:18 +11:00
Damien George
39d50d129c ports: Add SoftI2C and SoftSPI to machine module where appropriate.
Previous commits removed the ability for one I2C/SPI constructor to
construct both software- or hardware-based peripheral instances.  Such
construction is now split to explicit soft and non-soft types.

This commit makes both types available in all ports that previously could
create both software and hardware peripherals: machine.I2C and machine.SPI
construct hardware instances, while machine.SoftI2C and machine.SoftSPI
create software instances.

This is a breaking change for use of software-based I2C and SPI.  Code that
constructed I2C/SPI peripherals in the following way will need to be
changed:

    machine.I2C(-1, ...)            ->  machine.SoftI2C(...)
    machine.I2C(scl=scl, sda=sda)   ->  machine.SoftI2C(scl=scl, sda=sda)

    machine.SPI(-1, ...)            ->  machine.SoftSPI(...)
    machine.SPI(sck=sck, mosi=mosi, miso=miso)
                        ->  machine.SoftSPI(sck=sck, mosi=mosi, miso=miso)

Code which uses machine.I2C and machine.SPI classes to access hardware
peripherals does not need to change.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
c35deb2625 extmod/machine_i2c: Rename type to SoftI2C and add custom print method.
Also rename machine_i2c_type to mp_machine_soft_i2c_type.  These changes
make it clear that it's a soft-I2C implementation, and match SoftSPI.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
5f3c2f1fa8 stm32/irq: Clean up irq.h so it does not depend on core uPy defines.
The irq.h file now just provides low-level IRQ definitions and priorities.
All Python binding definitions are moved to modmachine.h, with some
renaming of pyb -> machine, and also the machine_idle definition (was
pyb_wfi) is moved to modmachine.c.

The cc3200 and teensy ports are updated to build with these changes.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-22 13:47:15 +10:00
Damien George
68d053c66e stm32/modmachine: Allow changing AHB and APB bus frequencies on STM32WB.
For now SYSCLK cannot be changed and must remain at 64MHz.
2020-06-02 10:48:49 +10:00
Thomas Roberts
d7399679de stm32: Add support for F412 MCUs. 2020-05-15 10:08:30 +10:00
Jim Mussared
def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Damien George
1a3e386c67 all: Remove spaces inside and around parenthesis.
Using new options enabled in the uncrustify configuration.
2020-03-28 23:36:44 +11:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George
97eca38c4f py: Add mp_raise_type helper macro and use it where appropriate.
This provides a more consistent C-level API to raise exceptions, ie moving
away from nlr_raise towards mp_raise_XXX.  It also reduces code size by a
small amount on some ports.
2020-02-13 11:03:37 +11:00
Damien George
2c8c2b935e stm32/powerctrl: Improve support for changing system freq on H7 MCUs.
This commit improves pllvalues.py to generate PLL values for H7 MCUs that
are valid (VCO in and out are in range) and extend for the entire range of
SYSCLK values up to 400MHz (up to 480MHz is currently unsupported).
2020-01-31 23:25:18 +11:00
Damien George
48b25a841b stm32: Add machine.Timer with soft timer implementation.
This commit adds an implementation of machine.Timer backed by the soft
timer mechanism.  It allows an arbitrary number of timers with 1ms
resolution, with an associated Python callback.  The Python-level API
matches existing ports that have a soft timer, and is used as:

    from machine import Timer
    t = Timer(freq=10, callback=lambda t:print(t))
    ...
    t = Timer(mode=Timer.ONE_SHOT, period=2000, callback=lambda t:print(t))
    ...
    t.deinit()
2019-10-31 22:12:55 +11:00
Damien George
ebacdfabb6 stm32/machine_adc: Add machine.ADC class. 2019-09-04 15:40:24 +10:00
Damien George
59b7166d87 stm32: Add initial support for STM32WBxx MCUs.
This new series of MCUs is similar to the L4 series with an additional
Cortex-M0 coprocessor.  The firmware for the wireless stack must be managed
separately and MicroPython does not currently interface to it.  Supported
features so far include: RTC, UART, USB, internal flash filesystem.
2019-07-17 16:33:31 +10:00
Damien George
23d9c6a0fd stm32: Add initial support for STM32L0xx MCUs. 2019-07-05 17:24:59 +10:00
Damien George
afb2e9dd94 stm32/modmachine: Disable IRQs before entering bootloader.
To make sure that the code that enters the bootloader is not interrupted.
2019-07-04 10:49:51 +10:00
Damien George
f88cb8a514 stm32/modmachine: Make RTC class available in machine module.
This is a start to make a more consistent machine.RTC class across ports.
The stm32 pyb.RTC class at least has the datetime() method which behaves
the same as esp8266 and esp32, and with this patch the ntptime.py script
now works with stm32.
2019-07-03 16:46:07 +10:00
Damien George
04c7cdb668 stm32: Enter bootloader via a system reset.
Entering a bootloader (ST system bootloader, or custom mboot) from software
by directly branching to it is not reliable, and the reliability of it
working can depend on the peripherals that were enabled by the application
code.  It's also not possible to branch to a bootloader if the WDT is
enabled (unless the bootloader has specific provisions to feed the WDT).

This patch changes the way a bootloader is entered from software by first
doing a complete system reset, then branching to the desired bootloader
early on in the start-up process.  The top two words of RAM (of the stack)
are reserved to store flags indicating that the bootloader should be
entered after a reset.
2019-06-25 14:15:49 +10:00
Chris Mason
14cf91f704 stm32: In link script, define start of stack separately from heap end.
Previously the end of the heap was the start (lowest address) of the stack.
With the changes in this commit these addresses are now independent,
allowing a board to place the heap and stack in separate locations.
2019-06-14 15:29:24 +10:00
Andrew Leech
66bcb5596a stm32/modmachine: In bootloader() disable caches before reset of periphs
Otherwise flushing and disabling the D-cache will give a hard-fault when
SDRAM is used.

Fixes #4818.
2019-05-29 15:50:17 +10:00
Damien George
e1e3704aa1 stm32/modmachine: Create dedicated asm function to branch to bootloader.
Recent gcc versions (at least 9.1) give a warning about using "sp" in the
clobber list.  Such code is removed by this patch.  A dedicated function is
instead used to set SP and branch to the bootloader so the code has full
control over what happens.

Fixes issue #4785.
2019-05-17 17:20:43 +10:00
Damien George
65b1fefa31 stm32/modmachine: Add ability to pass through user data to mboot. 2019-02-15 15:10:04 +11:00
Damien George
b26046aca2 stm32/modmachine: Make bootloader() enter custom loader if it's enabled.
If a custom bootloader is enabled (eg mboot) then machine.bootloader() will
now enter that loader.  To get the original ST DFU loader pass any argument
to the function, like machine.bootloader(1).
2019-02-07 16:13:57 +11:00
Damien George
285d265eee stm32: Implement machine.lightsleep(). 2019-01-27 11:13:32 +11:00
roland
4d8504425a stm32/modmachine: Fix reset_cause to correctly give DEEPSLEEP on L4 MCU.
Before this fix it returned SOFT_RESET after waking from a deepsleep
(standby).
2018-12-30 01:11:25 +11:00
Damien George
c6365ffb92 stm32/powerctrl: Add support for standby mode on L4 MCUs.
This maps to machine.deepsleep() which is now supported.
2018-12-05 00:40:05 +11:00
Damien George
66ca8e9b2c stm32/powerctrl: Move (deep)sleep funcs from modmachine.c to powerctrl.c 2018-11-28 12:22:20 +11:00
Damien George
bc54c57590 stm32/powerctrl: Optimise passing of default values to set_sysclk. 2018-09-24 17:34:05 +10:00
Damien George
dff14c740b stm32/powerctrl: Move function to set SYSCLK into new powerctrl file.
Power and clock control is low-level functionality and it makes sense to
have it in a dedicated file, at least so it can be reused by other parts of
the code.
2018-09-24 14:18:18 +10:00
Damien George
1acf58c08f stm32/modmachine: Re-enable PLLSAI[1] after waking from stop mode.
On F7s PLLSAI is used as a 48MHz clock source if the main PLL cannot
provide such a frequency, and on L4s PLLSAI1 is always used as a clock
source for the peripherals.  This commit makes sure these PLLs are
re-enabled upon waking from stop mode so the peripherals work.

See issues #4022 and #4178 (L4 specific).
2018-09-24 12:55:15 +10:00
Damien George
47550ef2cd stm32: For MCUs that have PLLSAI allow to set SYSCLK at 2MHz increments.
MCUs that have a PLLSAI can use it to generate a 48MHz clock for USB, SDIO
and RNG peripherals.  In such cases the SYSCLK is not restricted to values
that allow the system PLL to generate 48MHz, but can be any frequency.
This patch allows such configurability for F7 MCUs, allowing the SYSCLK to
be set in 2MHz increments via machine.freq().  PLLSAI will only be enabled
if needed, and consumes about 1mA extra.  This fine grained control of
frequency is useful to get accurate SPI baudrates, for example.
2018-09-11 16:42:57 +10:00
Damien George
5482d84673 stm32/modmachine: Get machine.sleep working on L4 MCUs.
When waking from stop mode most of the system is still in the same state as
before entering stop, so only minimal configuration is needed to bring the
system clock back online.
2018-08-01 17:14:19 +10:00
Damien George
21dae87710 stm32/modmachine: Get machine.sleep working on F0 MCUs. 2018-07-31 17:25:53 +10:00
Damien George
e1ae9939ac stm32: Support compiling with object representation D.
With this and previous patches the stm32 port can now be compiled using
object representation D (nan boxing).  Note that native code and frozen mpy
files with float constants are currently not supported with this object
representation.
2018-07-08 23:25:11 +10:00
Damien George
ea7e747979 stm32: Add support for STM32F0 MCUs. 2018-05-28 21:49:49 +10:00
Damien George
6d83468a30 stm32: Allow a board to disable MICROPY_VFS_FAT. 2018-05-28 21:46:20 +10:00
Damien George
f497723802 stm32: Allow to have no storage support if there are no block devices.
If no block devices are defined by a board then storage support will be
disabled.  This means there is no filesystem provided by either the
internal flash or external SPI flash.  But the VFS system can still be
enabled and filesystems provided on external devices like an SD card.
2018-05-28 21:45:46 +10:00
Damien George
cb3456ddfe stm32: Don't use %lu or %lx for formatting, use just %u or %x.
On this 32-bit arch there's no need to use the long version of the format
specifier.  It's only there to appease the compiler which checks the type
of the args passed to printf.  Removing the "l" saves a bit of code space.
2018-05-04 15:52:03 +10:00
Damien George
cf9fc7346d stm32: Allow a board to configure the HSE in bypass mode.
To use HSE bypass mode the board should define:

    #define MICROPY_HW_CLK_USE_BYPASS (1)

If this is not defined, or is defined to 0, then HSE oscillator mode is
used.
2018-04-11 16:46:47 +10:00
Damien George
e37b8ba5a5 stm32: Use STM32xx macros instead of MCU_SERIES_xx to select MCU type.
The CMSIS files for the STM32 range provide macros to distinguish between
the different MCU series: STM32F4, STM32F7, STM32H7, STM32L4, etc.  Prefer
to use these instead of custom ones.
2018-03-17 10:42:50 +11:00
iabdalkader
d151adb791 stm32/modmachine: Support basic H7 MCU features. 2018-03-09 15:10:53 +11:00