Commit Graph

703 Commits

Author SHA1 Message Date
Jim Mussared
580a2656d1 stm32: Use hardware double sqrt on F7/H7 MCUs.
Identical to cd527bb324 but for doubles.
This gives a -2.754% improvement on bm_float.py, and -35% improvement on
calling sqrt in a loop.
2019-10-10 17:39:32 +11:00
Andrey Belykh
305f537bf9 stm32/sdcard: Support boards with no SD card detect pin.
If MICROPY_HW_SDCARD_DETECT_PIN is not defined then the SD card will always
be detected as present.
2019-10-10 17:29:44 +11:00
Andrew Leech
04fe62d06f stm32/mboot: Add option to automatically reset when USB is disconnected.
Enable in board config with: #define MBOOT_USB_RESET_ON_DISCONNECT (1)
2019-10-08 16:07:32 +11:00
Jim Mussared
902bb4ceae stm32: Extract port-specific Nimble implementation.
On other ports (e.g. ESP32) they provide a complete Nimble implementation
(i.e. we don't need to use the code in extmod/nimble). This change
extracts out the bits that we don't need to use in other ports:
 - malloc/free/realloc for Nimble memory.
 - pendsv poll handler
 - depowering the cywbt

Also cleans up the root pointer management.
2019-10-08 14:40:35 +11:00
Damien George
4a6974bea5 stm32/boards/PYBD_SF2: Put nimble library in external QSPI XIP flash.
The BLE stack is not performance critical, so put it in external
memory-mapped flash to save internal flash for other things (like frozen
bytecode).
2019-10-05 23:51:33 +10:00
Martin Fischer
a0ce01f62e stm32/usbdev: Fix compile error if MICROPY_HW_USB_CDC_NUM is set to 2.
Fixes regression introduced by 6705767da1
2019-10-05 23:33:38 +10:00
Chris Mason
0096041c99 stm32/{adc,machine_adc}: Change ADC clock and sampling time for F0 MCUs.
STM32F0 has PCLK=48MHz and maximum ADC clock is 14MHz so use PCLK/4=12MHz
to stay within spec of the ADC peripheral.  In pyb.ADC set common sampling
time to approx 4uS for internal and external sources.  In machine.ADC
reduce sample time to approx 1uS for external source, leave internal at
maximum sampling time.
2019-10-04 21:39:17 +10:00
Damien George
26e90a0514 stm32/boards: Enable MICROPY_HW_RTC_USE_LSE on L4 boards.
The previous commit changed the default configuration on L4 MCUs to use
LSI, so configure these boards to use LSE again.
2019-10-04 16:10:13 +10:00
hahmadi
266146ad64 stm32/system_stm32: Support selection of HSE and LSI on L4 MCUs.
This commit adds the option to use HSE or MSI system clock, and LSE or LSI
RTC clock, on L4 MCUs.

Note that prior to this commit the default clocks on an L4 part were MSI
and LSE.  The defaults are now MSI and LSI.

In mpconfigboard.h select the clock source via:

    #define MICROPY_HW_RTC_USE_LSE (0) or (1)
    #define MICROPY_HW_CLK_USE_HSE (0) or (1)

and the PLLSAI1 N,P,Q,R settings:

    #define MICROPY_HW_CLK_PLLSAIN (12)
    #define MICROPY_HW_CLK_PLLSAIP (RCC_PLLP_DIV7)
    #define MICROPY_HW_CLK_PLLSAIQ (RCC_PLLQ_DIV2)
    #define MICROPY_HW_CLK_PLLSAIR (RCC_PLLR_DIV2)
2019-10-04 16:09:06 +10:00
Jim Mussared
fafa9d35dd stm32/boards/PYBD: Enable BLE for Pyboard D. 2019-10-01 09:51:02 +10:00
Jim Mussared
6f35f214d3 stm32/mpconfigport.h: Add modbluetooth module to stm32. 2019-10-01 09:51:02 +10:00
Jim Mussared
d72dbb822c stm32: Provide port-specific implementation for Nimble on STM32. 2019-10-01 09:51:02 +10:00
Andrew Leech
4ba0aff472 stm32/uart: Add RTS/CTS pin configuration support to UART4. 2019-09-27 13:24:01 +10:00
Chris Mason
eb12fa3862 stm32/powerctrlboot: Add support for HSI at 8MHz on F0 MCUs.
For use with F0 MCUs that don't have HSI48.  Select the clock source
explicitly in mpconfigboard.h.

On the NUCLEO_F091RC board use HSE bypass when HSE is chosen because the
NUCLEO clock source is STLINK not a crystal.
2019-09-26 17:34:04 +10:00
Chris Mason
f16e4be3fa stm32/powerctrlboot: Fix clock and PLL selection for HSI48 on F0 MCUs.
Before this patch the UART baudrate on F0 MCUs was wrong because the
stm32lib SystemCoreClockUpdate sets SystemCoreClock to 8MHz instead of
48MHz if HSI48 is routed directly to SYSCLK.

The workaround is to use HSI48 -> PREDIV (/2) -> PLL (*2) -> SYSCLK.

Fixes issue #5049.
2019-09-26 17:32:22 +10:00
Damien George
3328b7d71f stm32: Support disabling the compiler.
Disable via "#define MICROPY_ENABLE_COMPILER (0)" in the board's
mpconfigboard.h file.
2019-09-26 17:05:40 +10:00
Josh Lloyd
7d58a197cf py: Rename MP_QSTR_NULL to MP_QSTRnull to avoid intern collisions.
Fixes #5140.
2019-09-26 16:04:56 +10:00
Andrew Leech
2397b44062 stm32/usbd_cdc_interface: Add CTS flow control option for USB VCP.
Enabled by default, but disabled when REPL is connected to the VCP (this is
the existing behaviour).  Can be configured at run-time with, eg:

    pyb.USB_VCP().init(flow=pyb.USB_VCP.RTS | pyb.USB_VCP.CTS)
2019-09-26 13:50:24 +10:00
Damien George
6b4666f8cf stm32/can: Guard header file by MICROPY_HW_ENABLE_CAN.
Because not all MCU series have a CAN peripheral.
2019-09-23 23:45:07 +10:00
Damien George
ca8ff99e8c stm32: Use mp_printf with MICROPY_ERROR_PRINTER for uncaught exceptions. 2019-09-23 17:15:07 +10:00
iabdalkader
4f78ba3cf4 stm32/boards/NUCLEO_H743ZI: Enable FDCAN on this board. 2019-09-23 17:00:54 +10:00
iabdalkader
f7a07b3605 stm32: Add support for FDCAN peripheral, exposed as pyb.CAN.
The new fdcan.c file provides the low-level C interface to the FDCAN
peripheral, and pyb_can.c is updated to support both traditional CAN and
FDCAN, depending on the MCU being compiled for.
2019-09-23 17:00:54 +10:00
Damien George
d06fd384c2 stm32/can: Factor CAN driver into low-level and Python bindings.
can.c now contains the low-level C interface to the CAN peripheral, and
pyb_can.c the Python-level class/methods/constants.
2019-09-23 16:58:08 +10:00
Chris Liechti
6f7e774d12 stm32/machine_i2c: Add ability to specify I2C(4) by name. 2019-09-23 15:08:24 +10:00
iabdalkader
73c94bbbd4 stm32/modusocket: Fix NULL deref when accept() an unbound socket. 2019-09-17 12:30:10 +10:00
Damien George
22099ab88f stm32/machine_adc: Fix build for F4 and L4 MCUs that only have ADC1. 2019-09-12 19:10:12 +10:00
Damien George
f66616556d stm32/lwip_inc: Enable LWIP_NETIF_EXT_STATUS_CALLBACK for mDNS.
This feature makes sure that mDNS is automatically restarted when there is
any change event on a netif.
2019-09-12 18:08:50 +10:00
Damien George
b0e17bbb9d stm32/lwip_inc: Allocate additional MEMP_SYS_TIMEOUT when mDNS enabled.
Since v2.1 of lwIP mDNS uses a MEMP_SYS_TIMEOUT slot, so allocate an extra
one when this feature is enabled.
2019-09-12 18:05:27 +10:00
Damien George
bcaafa3823 stm32/usb: Verify number of used endpoints doesn't exceed maximum. 2019-09-11 15:17:38 +10:00
Damien George
6705767da1 stm32/usb: Add support for VCP+MSC+HID mode, incl 2xVCP and 3xVCP. 2019-09-11 15:17:38 +10:00
cristian
cfec054073 stm32/board/NUCLEO_F746ZG: Enable Ethernet periph, lwip and ussl. 2019-09-11 11:20:58 +10:00
Jim Mussared
c8c37ca407 stm32/boards/STM32F769DISC: Fix number of SDRAM row bits.
According to the schematic, the SDRAM part on this board is a
MT48LC4M32B2B5-6A, with "Row addressing 4K A[11:0]" (per datasheet).  This
commit updates mpconfigboard.h from 13 to 12 to match.
2019-09-10 23:13:52 +10:00
Christopher Wilson
f9d142523c stm32/boards/MIKROE_CLICKER2_STM32: Add MikroElektronika Clicker2 board.
- STM32F407VGT6 (1MB of Flash, 192+4 Kbytes of SRAM)
- 5V (via USB) or Li-Polymer Battery (3.7V) power input
- 2 x LEDs
- 2 x user switches
- 2 x mikroBUS sockets
- 2 x 1x26 mikromedia-compatible headers (52 pins)

https://www.mikroe.com/clicker-2-stm32f4
2019-09-10 13:57:01 +10:00
Damien George
2b07f56c2b stm32/boards/NUCLEO_L073RZ: Fix typo in MCU name. 2019-09-10 11:53:00 +10:00
Chris Wilson
a605b53702 stm32/mboot: Support boards with only two LEDs.
Mboot currently requires at least three LEDs to display each of the four
states.  However, since there are only four possible states, the states can
be displayed via binary counting on only 2 LEDs (if only 2 are available).
The existing patterns are still used for 3 or 4 LEDs.
2019-09-10 11:25:56 +10:00
Damien George
bd2e46e0a5 stm32/boards/stm32wb55_af.csv: Fix ADC pin-channel function mapping. 2019-09-06 17:56:34 +10:00
Damien George
62fe013a5f stm32/machine_adc: Improve operation of ADC for H7, L4 and WB MCUs. 2019-09-06 17:55:12 +10:00
Damien George
ebacdfabb6 stm32/machine_adc: Add machine.ADC class. 2019-09-04 15:40:24 +10:00
Jim Mussared
06661890de stm32/powerctrl: Fix machine.bootloader() for L0 MCUs. 2019-09-04 11:36:53 +10:00
Jim Mussared
8fc00928ea stm32/dma: Fix DMA config for L0 MCUs. 2019-09-03 23:33:09 +10:00
Jim Mussared
74fe841449 docs/library/pyb.DAC.rst: Correct frequency for triangle mode output.
Also correct comments in related code.
2019-09-03 23:25:45 +10:00
Damien George
400a128e11 stm32/stm32_it: Include correct EXTI interrupt handlers for L0 MCUs. 2019-08-29 12:00:18 +10:00
iabdalkader
0bec07f32b stm32/extint: Fix EXTI mapping of PVD and RTC events for H7 MCUs. 2019-08-28 12:53:42 +10:00
Damien George
5789558d60 stm32/boards/PYBD_SF2: Exclude certain things when building mboot. 2019-08-28 12:37:13 +10:00
Damien George
68d74b0074 stm32/mboot/Makefile: Define "BUILDING_MBOOT" when building mboot.
So boards can configure their settings based on whether mboot or the main
firmware is being built.
2019-08-28 12:37:13 +10:00
Damien George
b1e04848ef stm32/mphalport: Put PYBD specific MAC code in board specific file. 2019-08-28 12:37:13 +10:00
stijn
af5c998f37 py/modmath: Implement math.isclose() for non-complex numbers.
As per PEP 485, this function appeared in for Python 3.5.  Configured via
MICROPY_PY_MATH_ISCLOSE which is disabled by default, but enabled for the
ports which already have MICROPY_PY_MATH_SPECIAL_FUNCTIONS enabled.
2019-08-17 23:23:17 +10:00
Damien George
3eff81288c stm32/i2c: Fix generation of restart condition for hw I2C on F0/F7.
Before this patch I2C transactions using a hardware I2C peripheral on F0/F7
MCUs would not correctly generate the I2C restart condition, and instead
would generate a stop followed by a start.  This is because the CR2 AUTOEND
bit was being set before CR2 START when the peripheral already had the I2C
bus from a previous transaction that did not generate a stop.

As a consequence all combined transactions, eg read-then-write for an I2C
memory transfer, generated a stop condition after the first transaction and
didn't generate a stop at the very end (but still released the bus).  Some
I2C devices require a repeated start to function correctly.

This patch fixes this by making sure the CR2 AUTOEND bit is set after the
start condition and slave address have been fully transferred out.
2019-08-16 13:34:04 +10:00
Damien George
497683b315 gitignore: Put build-*/ pattern in top-level gitignore file. 2019-08-16 00:08:08 +10:00
Damien George
25d3509986 stm32/usbd: Make USB device FIFO sizes dynamically configurable.
Allows to optimise and configure the FIFO sizes depending on the USB device
configuration selected at runtime, eg VCP+MSC vs 3xVCP+MSC.
2019-08-15 13:56:50 +10:00