Commit Graph

89 Commits

Author SHA1 Message Date
Jonathan Bruchim
dde0735ac1 zephyr: Guard I2C code with appropriate ifdef config.
To reduce binary code size when not using I2C.

Signed-off-by: Jonathan Bruchim <yonbruchim@gmail.com>
2020-12-07 23:11:00 +11:00
Maureen Helm
92a5ee6ac1 zephyr: Replace broken shell_net_iface() with more general shell_exec().
The zephyr function net_shell_cmd_iface() was removed in zephyr v1.14.0,
therefore the MicroPython zephyr port did not build with newer zephyr
versions when CONFIG_NET_SHELL=y. Replace with a more general
shell_exec() function that can execute any zephyr shell command. For
example:

>>> zephyr.shell_exec("net")

Subcommands:
  allocs     :Print network memory allocations.
  arp        :Print information about IPv4 ARP cache.
  conn       :Print information about network connections.
  dns        :Show how DNS is configured.
  events     :Monitor network management events.
  gptp       :Print information about gPTP support.
  iface      :Print information about network interfaces.
  ipv6       :Print information about IPv6 specific information and
              configuration.
  mem        :Print information about network memory usage.
  nbr        :Print neighbor information.
  ping       :Ping a network host.
  pkt        :net_pkt information.
  ppp        :PPP information.
  resume     :Resume a network interface
  route      :Show network route.
  stacks     :Show network stacks information.
  stats      :Show network statistics.
  suspend    :Suspend a network interface
  tcp        :Connect/send/close TCP connection.
  vlan       :Show VLAN information.
  websocket  :Print information about WebSocket connections.

>>> zephyr.shell_exec("kernel")

kernel - Kernel commands
Subcommands:
  cycles   :Kernel cycles.
  reboot   :Reboot.
  stacks   :List threads stack usage.
  threads  :List kernel threads.
  uptime   :Kernel uptime.
  version  :Kernel version.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-12-07 23:01:00 +11:00
Damien George
64180f0742 extmod/machine_i2c: Add init protocol method for generic I2C bindings.
Hardware I2C implementations must provide a .init() protocol method if they
want to support reconfiguration.  Otherwise the default is that i2c.init()
raises an OSError (currently the case for all ports).

mp_machine_soft_i2c_locals_dict is renamed to mp_machine_i2c_locals_dict to
match the generic SPI bindings.

Fixes issue #6623 (where calling .init() on a HW I2C would crash).

Signed-off-by: Damien George <damien@micropython.org>
2020-11-23 19:45:04 +11:00
Damien George
71f3ade770 ports: Support legacy soft I2C/SPI construction via id=-1 arg.
With a warning that this way of constructing software I2C/SPI is
deprecated.  The check and warning will be removed in a future release.

This should help existing code to migrate to the new SoftI2C/SoftSPI types.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
39d50d129c ports: Add SoftI2C and SoftSPI to machine module where appropriate.
Previous commits removed the ability for one I2C/SPI constructor to
construct both software- or hardware-based peripheral instances.  Such
construction is now split to explicit soft and non-soft types.

This commit makes both types available in all ports that previously could
create both software and hardware peripherals: machine.I2C and machine.SPI
construct hardware instances, while machine.SoftI2C and machine.SoftSPI
create software instances.

This is a breaking change for use of software-based I2C and SPI.  Code that
constructed I2C/SPI peripherals in the following way will need to be
changed:

    machine.I2C(-1, ...)            ->  machine.SoftI2C(...)
    machine.I2C(scl=scl, sda=sda)   ->  machine.SoftI2C(scl=scl, sda=sda)

    machine.SPI(-1, ...)            ->  machine.SoftSPI(...)
    machine.SPI(sck=sck, mosi=mosi, miso=miso)
                        ->  machine.SoftSPI(sck=sck, mosi=mosi, miso=miso)

Code which uses machine.I2C and machine.SPI classes to access hardware
peripherals does not need to change.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
aaed33896b extmod/machine_i2c: Remove "id" arg in SoftI2C constructor.
The SoftI2C constructor is now used soley to create SoftI2C instances, it
can no longer delegate to create a hardware-based I2C instance.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
c35deb2625 extmod/machine_i2c: Rename type to SoftI2C and add custom print method.
Also rename machine_i2c_type to mp_machine_soft_i2c_type.  These changes
make it clear that it's a soft-I2C implementation, and match SoftSPI.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Maureen Helm
997ec9e8cc zephyr: Update build instructions to v2.4.0.
Updates the zephyr port build instructions to use the latest zephyr
release tag.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-09-30 23:21:53 +10:00
Maureen Helm
f842e32155 zephyr: Const-ify struct device instance pointers.
Zephyr v2.4.0 added a const qualifier to usages of struct device to
allow storing device driver instances exclusively in flash and thereby
reduce ram footprint.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-09-30 23:21:53 +10:00
Maureen Helm
ce49be43b1 zephyr: Replace zephyr integer types with C99 types.
Zephyr v2.4.0 stopped using custom integer types in favor of C99 types
instead.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-09-30 23:21:53 +10:00
Damien George
3ff7079277 lib/utils/mpirq: Add mp_irq_init func, and clean up unused init method.
mp_irq_init() is useful when the IRQ object is allocated by the caller.

The mp_irq_methods_t.init method is not used anywhere so has been removed.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-04 12:40:38 +10:00
Damien George
a93a378e93 zephyr/README: Update required Zephyr version and mention new features.
Signed-off-by: Damien George <damien@micropython.org>
2020-08-28 16:42:32 +10:00
Damien George
ee50a6effe py/mphal.h: Introduce mp_hal_time_ns and implement on various ports.
This should return a 64-bit value being the number of nanoseconds since
1970/1/1.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-22 16:13:44 +10:00
Maureen Helm
ac94e06f0b zephyr: Include storage/flash_map.h unconditionally.
Include storage/flash_map.h unconditionally so we always have access to the
FLASH_AREA_LABEL_EXISTS macro, even if CONFIG_FLASH_MAP is not defined.

This fixes a build error for the qemu_x86 board:

main.c:108:63: error: missing binary operator before token "("
  108 |     #elif defined(CONFIG_FLASH_MAP) && FLASH_AREA_LABEL_EXISTS(storage)
      |                                                               ^
../../py/mkrules.mk:88: recipe for target 'build/genhdr/qstr.i.last' failed

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-08-21 11:23:43 +10:00
Damien George
41b7734c46 zephyr/make-minimal: Disable FAT and LFS2 options to make it build.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-30 22:33:41 +10:00
Damien George
f84145bea1 zephyr: Implement machine.Pin.irq() for setting callbacks on pin change.
Supports hard and soft interrupts.  In the current implementation, soft
interrupt callbacks will only be called when the VM is executing, ie they
will not be called during a blocking kernel call like k_msleep.  And the
behaviour of hard interrupt callbacks will depend on the underlying device,
as well as the amount of ISR stack space.

Soft and hard interrupts tested on frdm_k64f and nucleo_f767zi boards.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-30 22:33:41 +10:00
Maureen Helm
1ae861819d zephyr: Use cmake find_package to locate zephyr.
Updates the zephyr port to use the ZEPHYR_BASE environment variable only to
locate the zephyr cmake package, allowing cmake to cache the variable.
2020-06-12 10:25:16 +10:00
Maureen Helm
b1651ff092 zephyr: Increase minimum required cmake version to 3.13.1.
The minimum required cmake version has been 3.13.1 since zephyr 1.14.0.
2020-06-12 10:25:13 +10:00
Maureen Helm
4837b1caa2 zephyr: Convert DT_FLASH_AREA usages to new dts macros.
Converts DT_FLASH_AREA usages in the zephyr port to new device tree macros
introduced in zephyr 2.3.

Tested with littlefs on the reel_board.
2020-06-12 10:25:04 +10:00
Maureen Helm
6aff27ac3c zephyr: Update to new zephyr timeout API.
Updates the zephyr port to use the new timeout api introduced in zephyr
2.3.
2020-06-12 10:24:54 +10:00
Maureen Helm
db02cb061d zephyr: Update for refactored zephyr device structures.
Updates the zephyr port to use refactored device structures introduced in
zephyr 2.3.
2020-06-12 10:24:46 +10:00
Maureen Helm
8b061f2d79 zephyr: Fix floating point configuration.
Zephyr renamed CONFIG_FLOAT to CONFIG_FPU to better reflect its semantics
of enabling the hardware floating point unit (FPU) rather than enabling
toolchain-level floating point support (i.e., software floating point for
FPU-less socs).
2020-06-12 10:24:30 +10:00
Maureen Helm
38b4f1569e zephyr: Fix and rename stacks_analyze function in zephyr module.
Zephyr deprecated and then removed its stack_analyze function because it
was unsafe.  Use the new zephyr thread analyzer instead and rename the
MicroPython function to zephyr.thread_analyze() to be more consistent with
the implementation.

Tested on mimxrt1050_evk.

The output now looks like this:

>>> zephyr.thread_analyze()
Thread analyze:
 80004ff4            : unused 400 usage 112 / 512 (21 %)
 rx_workq            : unused 1320 usage 180 / 1500 (12 %)
 tx_workq            : unused 992 usage 208 / 1200 (17 %)
 net_mgmt            : unused 656 usage 112 / 768 (14 %)
 sysworkq            : unused 564 usage 460 / 1024 (44 %)
 idle                : unused 256 usage 64 / 320 (20 %)
 main                : unused 2952 usage 1784 / 4736 (37 %)
2020-06-12 10:24:01 +10:00
Maureen Helm
25434e976b zephyr: Use zephyr build system to merge configurations.
The zephyr build system supports merging application-level board
configurations, so there is no need to reproduce this functionality in
MicroPython.

If CONF_FILE is not explicitly set, then the zephyr build system looks for
prj.conf in the application directory.  Therefore we rename the MicroPython
prj_base.conf to prj.conf.

Furthermore, if the zephyr build system finds boards/$(BOARD).conf in the
application directory, it merges that configuration with prj.conf.
Therefore we rename all the MicroPython board .conf files and move them
into a boards/ directory.

The minimal configuration, prj_minimal.conf, is left in the application
directory because it is used as an explicitly set CONF_FILE in
make-minimal.
2020-05-05 00:48:44 +10:00
stijn
84fa3312cf all: Format code to add space after C++-style comment start.
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
2020-04-23 11:24:25 +10:00
Jim Mussared
def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Maureen Helm
76a5b3a97a zephyr: Update machine.Pin class to use new zephyr gpio api.
Zephyr v2.2 reworked its gpio api to support linux device tree bindings and
pin logical levels.  This commit updates the zephyr port's machine.Pin
class to replace the deprecated gpio api calls with the new supported gpio
api.  This resolves several build warnings.

Tested on frdm_k64f and mimxrt1050_evk boards.
2020-03-25 00:29:42 +11:00
Maureen Helm
110a610f70 zephyr: Execute main.py file if it exists.
Adds support in the zephyr port to execute main.py if the file system is
enabled and the file exists. Existing support for executing a main.py
frozen module is preserved, since pyexec_file_if_exists() works just
like pyexec_frozen_module() if there's no vfs.
2020-03-11 08:30:42 -05:00
Maureen Helm
78c7e4a859 zephyr: Enable usb mass storage class on mimxrt1050_evk.
Enables the zephyr usb device stack and mass storage class on the
mimxrt1050_evk board. The mass storage class is backed by the sdhc disk
access driver, so it's now possible to browse and modify the contents of
the SD card from a USB host (your PC). This is in preparation to support
writing a main.py script to the SD card, and then executing it after the
next reset.
2020-03-11 07:46:41 -05:00
Maureen Helm
5feb54afbb zephyr: Mount a file system during init.
Adds support in the zephyr port to mount a file system if a block device
(sdhc disk access or flash area) is available. The mount point is either
"/sd" or "/flash" depending on the type of block device.

Tested with an sdhc disk access block device and fatfs on the
mimxrt1050_evk board.

Tested with a flash area block device and littlefs on the reel_board.
2020-03-11 07:46:41 -05:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Maureen Helm
7a5752a748 zephyr: Enable littlefs.
Enables the littlefs (v1 and v2) filesystems in the zephyr port.

Example usage with the internal flash on the reel_board or the
rv32m1_vega_ri5cy board:

import os
from zephyr import FlashArea
bdev = FlashArea(FlashArea.STORAGE, 4096)
os.VfsLfs2.mkfs(bdev)
os.mount(bdev, '/flash')
with open('/flash/hello.txt','w') as f:
    f.write('Hello world')
print(open('/flash/hello.txt').read())

Things get a little trickier with the frdm_k64f due to the micropython
application spilling into the default flash storage partition defined
for this board. The zephyr build system doesn't enforce the flash
partitioning when mcuboot is not enabled (which it is not for
micropython). For now we can demonstrate that the littlefs filesystem
works on frdm_k64f by constructing the FlashArea block device on the
mcuboot scratch partition instead of the storage partition. Do this by
replacing the FlashArea.STORAGE constant above with the value 4.
2020-02-07 11:24:06 +11:00
Maureen Helm
86a66960f9 zephyr: Implement block device protocol via zephyr flash map api.
Introduces a new zephyr.FlashArea class that uses the zephyr flash map
api to implement the uos.AbstractBlockDev protocol. The flash driver is
enabled on the frdm_k64f board, reel_board, and rv32m1_vega_ri5cy board.

The standard and extended block device protocols are both supported,
therefore this class can be used with file systems like littlefs which
require the extended interface.
2020-02-07 11:24:06 +11:00
Maureen Helm
2d7ec8e704 zephyr: Enable fatfs.
Enables the fatfs filesystem in the zephyr port.

Example usage with an SD card on the mimxrt1050_evk board:

import zephyr, os
bdev = zephyr.DiskAccess('SDHC')
os.VfsFat.mkfs(bdev)
os.mount(bdev, '/sd')
with open('/sd/hello.txt','w') as f:
    f.write('Hello world')
print(open('/sd/hello.txt').read())
2020-02-07 11:24:06 +11:00
Maureen Helm
a0440b01ea zephyr: Enable virtual file system and uos module.
Enables the virtual file system and uos module in the zephyr port.
No concrete file system implementations are enabled yet.
2020-02-07 11:24:06 +11:00
Maureen Helm
cc19cf2549 zephyr: Implement block device protocol via zephyr disk access api.
Introduces a new zephyr.DiskAccess class that uses the zephyr disk
access api to implement the uos.AbstractBlockDev protocol. This can be
used with any type of zephyr disk access driver, which currently
includes SDHC, RAM, and FLASH implementations. The SDHC driver is
enabled on the mimxrt1050_evk board.

Only the standard block device protocol (without the offset parameter)
can be supported with the zephyr disk access api, therefore this class
cannot be used with file systems like littlefs which require the
extended interface. In the future it may be possible to implement the
extended interface in a new class using the zephyr flash api.
2020-02-07 11:24:06 +11:00
Maureen Helm
bc3ce86a5a zephyr: Remove reference to syscall_macros_h_target.
Zephyr removed the build target syscall_macros_h_target in commit
f4adf107f31674eb20881531900ff092cc40c07f.  Removes reference from
MicroPython to fix build errors in the zephyr port.

This change is not compatible with zephyr v2.1 or earlier.  It will be
compatible with Zephyr v2.2 when released.
2020-02-04 17:10:24 +11:00
Maureen Helm
a7663b862e zephyr: Replace deprecated time conversion macro.
The SYS_CLOCK_HW_CYCLES_TO_NS macro was deprecated in zephyr commit
8892406c1de21bd5de5877f39099e3663a5f3af1.  This commit updates MicroPython
to use the new k_cyc_to_ns_floor64 api and fix build warnings in the zephyr
port.

This change is compatible with Zephyr v2.1 and later.
2020-02-04 17:09:59 +11:00
Maureen Helm
c25e12d0dd zephyr: Update include paths for Zephyr v2.0.
Zephyr restructured its includes in v2.0 and removed compatibility shims
after two releases in commit 1342dadc365ee22199e51779185899ddf7478686.
Updates include paths in MicroPython accordingly to fix build errors in
the zephyr port.

These changes are compatible with Zephyr v2.0 and later.
2020-02-04 17:09:19 +11:00
Kamil Klimek
53f3cbc2c4 zephyr/main: Use mp_stack API instead of local pointer for stack top.
The MP_STATE_THREAD(stack_top) is always available so use it instead of
creating a separate variable.  This also allows gc_collect() to be used as
an independent function, without real_main() being called.
2019-10-29 23:05:07 +11:00
Damien George
d2384efa80 py: Automatically provide weak links from "foo" to "ufoo" module name.
This commit implements automatic module weak links for all built-in
modules, by searching for "ufoo" in the built-in module list if "foo"
cannot be found.  This means that all modules named "ufoo" are always
available as "foo".  Also, a port can no longer add any other weak links,
which makes strict the definition of a weak link.

It saves some code size (about 100-200 bytes) on ports that previously had
lots of weak links.

Some changes from the previous behaviour:
- It doesn't intern the non-u module names (eg "foo" is not interned),
  which saves code size, but will mean that "import foo" creates a new qstr
  (namely "foo") in RAM (unless the importing module is frozen).
- help('modules') no longer lists non-u module names, only the u-variants;
  this reduces duplication in the help listing.

Weak links are effectively the same as having a set of symbolic links on
the filesystem that is searched last.  So an "import foo" will search
built-in modules first, then all paths in sys.path, then weak links last,
importing "ufoo" if it exists.  Thus a file called "foo.py" somewhere in
sys.path will still have precedence over the weak link of "foo" to "ufoo".

See issues: #1740, #4449, #5229, #5241.
2019-10-22 15:30:52 +11:00
Paul Sokolovsky
c4a6d9c631 zephyr: Switch back to enabling I2C in board-specific configs.
I2C can't be enabled in prj_base.conf because it's a board-specific
feature.  For example, if a board doesn't have I2C but CONFIG_I2C=y then
the build will fail (on Zephyr build system side).  The patch here gets the
qemu_cortex_m3 build working again.
2019-05-24 15:33:02 +10:00
Paul Sokolovsky
b88bf42793 zephyr/README: Reorder content related to recently added I2C.
So it fits better with existing narrative.
2019-05-24 15:29:29 +10:00
Damien George
647b27d028 zephyr/machine_i2c: Update to support new C-level I2C API. 2019-05-20 15:04:29 +10:00
Damiano Mazzella
3c9f78b048 zephyr/CMakeLists.txt: Set AR to point to the Zephyr toolchain exe. 2019-04-11 12:24:05 +10:00
Maureen Helm
2befcb8a9d zephyr/i2c: Add support for hardware i2c.
Adds support for hardware i2c to the zephyr port. Similar to other ports
such as stm32 and nrf, we only implement the i2c protocol functions
(readfrom and writeto) and defer memory operations (readfrom_mem,
readfrom_mem_into, and writeto_mem) to the software i2c implementation.
This may need to change in the future because zephyr is considering
deprecating its i2c_transfer function in favor of i2c_write_read; in this
case we would probably want to implement the memory operations directly
using i2c_write_read.

Tested with the accelerometer on frdm_k64f and bbc_microbit boards.
2019-03-26 16:16:26 +11:00
Maureen Helm
493ee7df18 zephyr/prj_frdm_kw41z.conf: Add new board configuration.
Adds a new board configuration for the frdm_kw41z board, including support
for the fxos8700 accelerometer/magnetometer/die temperature sensor.
2019-03-12 17:12:13 +11:00
Maureen Helm
7748375b6e zephyr/prj_frdm_k64f.conf: Add fxos8700 sensor.
Adds the fxos8700 accelerometer/magnetometer/die temperature sensor to the
frdm_k64f board configuration.
2019-03-12 17:12:00 +11:00
Paul Sokolovsky
6d82499a48 zephyr/Makefile: Proxy ram_report, rom_report targets from Zephyr. 2019-03-12 17:11:52 +11:00
Paul Sokolovsky
755b0b807b zephyr/prj_minimal.conf: Switch to CONFIG_STDOUT_CONSOLE.
Prompted by code size analysis, after arduino_101 build overflowing ROM.
2019-03-12 17:11:46 +11:00