Commit Graph

77 Commits

Author SHA1 Message Date
Damien George
f01d5fb657 py/mkrules.mk: Automatically configure frozen options when manifest set.
Following how mkrules.cmake works.  This makes it easy for a port to enable
frozen code, by defining FROZEN_MANIFEST in its Makefile.

Signed-off-by: Damien George <damien@micropython.org>
2023-06-08 23:12:56 +10:00
Jim Mussared
45ac651d1a all: Rename *umodule*.c to remove the "u" prefix.
Updates any includes, and references from Makefiles/CMake.

This essentially reverts what was done long ago in commit
136b5cbd76

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:17 +10:00
Damien George
a3c427898e nrf/modules/utime: Use extmod version of time module.
API additions;
- time.sleep() is added
- time.ticks_cpu() is added, but it just returns 0

No API or functional change to existing time functions.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:51 +10:00
robert-hh
a529e0e8cf nrf/nrfx_config: Use UARTE for nrf52xxx devices.
It was incomplete.
2023-04-05 10:00:06 +10:00
robert-hh
a1f838cdf1 nrf/modules/machine/pwm: Use extmod/machine_pwm.c for PWM module.
This is a breaking change, making the hardware PWM on the nrf port
compatible with the other ports providing machine.PWM.

Frequency range 4Hz - ~5.4 MHz.  The base clock range is 125kHz to 16 MHz,
and the divider range is 3 - 32767.

The hardware supports up to four outputs per PWM device with different duty
cycles, but only one output is (and was) supported.
2023-03-10 10:43:55 +11:00
Jim Mussared
69b93527d5 ports: Make BOARD default from BOARD_DIR in Makefile's.
This allows:

    $ make BOARD_DIR=path/to/board

to infer BOARD=board, rather than the previous behavior that required
additionally setting BOARD explicitly.

Also makes the same change for VARIANT_DIR -> VARIANT on Unix.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2023-02-23 09:47:08 +11:00
iabdalkader
68d049ea5e nrf/Makefile: Add support for BOSSAC flasher.
Used by Arduino boards.
2023-02-16 12:46:23 +11:00
Angus Gratton
2e6e53057b shared/tinyusb: Further refactor static USB device implementation.
App the mp_ prefix to usbd_ symbols and files which are defined here and
not in TinyUSB.

rp2 only for now. This includes some groundwork for dynamic USB devices
(defined in Python).

This work was funded through GitHub Sponsors.

Signed-off-by: Angus Gratton <angus@redyak.com.au>
2022-11-11 16:47:36 +11:00
Jim Mussared
a2aceb5007 nrf/Makefile: Split up SRC_C variables.
This improves clarity a bit, but also ensures that only the required files
are added to SRC_QSTR.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-12 00:09:55 +11:00
Jim Mussared
d6d8722558 extmod: Make extmod.mk self-contained.
This makes it so that all a port needs to do is set the relevant variables
and "include extmod.mk" and doesn't need to worry about adding anything to
OBJ, CFLAGS, SRC_QSTR, etc.

Make all extmod variables (src, flags, etc) private to extmod.mk.

Also move common/shared, extmod-related fragments (e.g. wiznet, cyw43,
bluetooth) into extmod.mk.

Now that SRC_MOD, CFLAGS_MOD, CXXFLAGS_MOD are unused by both extmod.mk
(and user-C-modules in a previous commit), remove all uses of them from
port makefiles.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:31:49 +11:00
Jim Mussared
67d05ed02b ports: Make generated pin.c handling more consistent across ports.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:18:46 +11:00
Jim Mussared
17f2783e4a all: Use += rather than = everywhere for CFLAGS/LDFLAGS/LIBS.
This avoids a surprise where an = can cancel out an earlier +=.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:17:41 +11:00
Angus Gratton
a16a330da5 nrf,stm32: Don't enable debug info by default if LTO is on.
It seems sometimes gcc with LTO will generate otherwise valid assembly
listings that cause 'as' to error out when generating DWARF debug info; see
https://sourceware.org/bugzilla/show_bug.cgi?id=29494

Therefore, don't enable -g by default if LTO is on.

Enabling LTO=1 DEBUG=1 is still possible but may result in random errors
at link time due to 'as' (the error in this case is "Error: unaligned
opcodes detected in executable segment", and the only other easy workaround
is CFLAGS+=-fno-jump-tables which may increase code size significantly).

Follows on from fdfe4eca74
2022-08-15 22:55:34 +10:00
Jim Mussared
be83c08f46 ports: Always append to GIT_SUBMODULES.
Avoids overwriting submodules required by base makefiles.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-03 00:05:26 +10:00
Angus Gratton
fdfe4eca74 ports: Always include debug information in the ELF.
For bare metal ARM & xtensa targets, passing -g will make the ELF file
larger but doesn't change the binary size.  However, this means tools like
gdb, addr2line, etc can extract source-level information from the ELF.

Also standardise -ggdb to -g, these produce the exact same ELF file on
arm-none-eabi-gcc and will use DWARF format for all these ports.
2022-07-29 11:24:00 +10:00
David Lechner
07cae9178f nrf/Makefile: Drop unused MPY_CROSS and MPY_TOOL variables.
These variables are no longer used in the nrf Makefile and can be removed.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-05 23:51:26 +10:00
iabdalkader
425d8fc0d6 nrf: Enable optional support for Arduino 1200bps touch.
Individual boards must enable it via MICROPY_HW_USB_CDC_1200BPS_TOUCH.
2022-06-23 14:33:40 +10:00
David Lechner
c118b5d0e4 extmod/extmod.mk: Separate out extmod file list from py.mk to extmod.mk.
This separates extmod source files from `py.mk`.  Previously, `py.mk`
assumed that every consumer of the py/ directory also wanted to include
extmod/.  However, this is not the case.  For example, building mpy-cross
uses py/ but doesn't need extmod/.

This commit moves all extmod-specific items from `py.mk` to `extmod.mk` and
explicitly includes `extmod.mk` in ports that use it.

Signed-off-by: David Lechner <david@pybricks.com>
2022-06-21 00:14:34 +10:00
iabdalkader
921dd94676 nrf/main: Add startup and early-init board hook macros.
Following stm32 for naming and location of the hooks.  Also allow a board
to provide custom .c files to implement code for these hooks.
2022-06-17 13:23:45 +10:00
Jim Mussared
92353c2911 all: Remove support for FROZEN_DIR and FROZEN_MPY_DIR.
These have been deprecated for over two years in favour of FROZEN_MANIFEST
and manifest.py.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-17 23:54:05 +11:00
Pooya Moradi
95ccd9a005 nrf/Makefile: Improve Black Magic Probe commands.
Used batch mode to get rid of the confirmation prompt on flashing.
Used 'compare-sections' to verify flash.
Removed the unnecessary `quit` at the end.
2021-11-17 14:32:02 +11:00
Glenn Ruben Bakke
aa857eb65e nrf/Makefile: Set default manifest file for all targets.
Set the default manifest to "modules/manifest.py".  This includes files
from the folder "modules/scripts".  The manifest default value is overriden
by all nrf51 boards that have SoftDevice present (SD=s110) to save flash.

Also add "modules/manifest.py" which is set to freeze
"modules/scripts/_mkfs.py".
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
990341d18e nrf: Facilitate use of freeze manifest.
Update the Makefile to handle FROZEN_MANIFEST, and the README with some
small samples on how to use freeze manifests.  And add BOARD_DIR to the
Makefile which can be referenced in boards/<board>/mpconfigboard.mk to
include a board specific manifest.
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
0bde907a8b nrf/Makefile: Add _fs_size linker script override from make.
Add posibility to override linker script "_fs_size" from make by adding the
FS_SIZE parameter.  The syntax of value is linker script syntax.  For
example, the value of 131072 bytes can be written as 128K like this:
FS_SIZE=128K.

If not set, default value for "_fs_size" from linker script will be used.
2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
127cec8cae nrf/modules/nrf: Add new nrf module with flash block device.
This commit adds the "nrf" module for port specific modules and objects.
Included in it is the "Flash" object which exposes a block device
implementation to access internal SoC flash.

Thanks to @aykevl aka Ayke van Laethem for the initial implementation.
2021-08-08 23:09:26 +10:00
Damien George
136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Zoltán Vörös
8c02b94946 nrf: Add more math sources to Makefile, and enable log2 implementation.
This commit adds a few math functions to the source list in the Makefile,
and implements the log2f function, so that ulab can be compiled on the nrf
boards.  It also addresses part of #5162.
2021-06-08 16:39:47 +10:00
Glenn Ruben Bakke
634f6df324 nrf/Makefile: Add support for flashing with nrfutil.
An additional Makefile parameter NRFUTIL_PORT can be set in order
to define the serial port to used for the DFU (Default: /dev/ttyACM0).

The "nrfutil" that is used as flasher towards OpenBootloader is
available for installation through Python "pip".

In case of SD=s140, SoftDevice ID 0xB6 is passed to nrfutil's package
generation which corresponds to SoftDevice s140 v6.1.1.
2020-12-07 20:04:50 +01:00
Glenn Ruben Bakke
718397a37d nrf/Makefile: Add bootloader specific section.
Add the option for "mpconfigboard.mk" to define whether the
board hosts a bootloader or not. The BOOTLOADER make variable
must be set to the name of the bootloader.

When the BOOTLOADER name is set it is also required to supply
the BOOTLOADER_VERSION_MAJOR and the BOOTLOADER_VERSION_MINOR
from the "mpconfigboards.mk". These will be used to resolve which
bootloader linker script that should be passed to the linker.

The BOOTLOADER section also supplies the C-compiler with
BOOTLOADER_<bootloader name>=<version major><version minor>
as a compiler define. This is for future use in case a bootloader
needs to do modification to the startup files or similar (like
setting the VTOR specific to a version of a bootloader).
2020-12-07 20:04:50 +01:00
Roberto Colistete Jr
91c5d168c0 nrf/Makefile: Improve user C modules support.
Add CFLAGS_EXTRA to CFLAGS. Include LDFLAGS_MOD to the compilation.
And, add SRC_MOD to SRC_QSTR.
2020-08-26 22:14:40 +02:00
Glenn Ruben Bakke
c2317a3a8d nrf/Makefile: Disable ROM text compression when compiling for debug.
When compiling for debug (-O0) the .text segment cannot fit the flash
region when MICROPY_ROM_TEXT_COMPRESSION=1, because the compiler does not
optimise away the large if-else chain used to select the correct compressed
string.

This commit enforces MICROPY_ROM_TEXT_COMPRESSION=0 when compiling for
debug (DEBUG=1).
2020-07-01 22:54:52 +10:00
Jim Mussared
cd9a8c1742 nrf: Add openocd as a supported flasher.
Tested with the Particle Debugger on a Xenon.
2020-05-15 15:06:02 +10:00
Jim Mussared
e7f8c7d9a3 nrf: Update to work with nrfx v2.0.0, to match TinyUSB.
Commit 6cea369b89 updated the TinyUSB
submodule to a version based on nrfx v2.0.0.  This commit updates the nrf
port to work with the latest TinyUSB and nrfx v2.0.0.
2020-05-15 15:06:02 +10:00
Damien George
eb5e9c00f8 nrf/Makefile: Don't use -fno-builtin for Cortex-M0 builds.
So that error string compression is optimised correctly (it needs strcmp to
be optimised away by the compiler).
2020-05-15 13:39:12 +10:00
Jim Mussared
073b9a5eb8 ports: Enable error text compression for various ports, but not all.
Enabled on: bare-arm, minimal, unix coverage/dev/minimal, stm32, esp32,
esp8266, cc3200, teensy, qemu-arm, nrf.  Not enabled on others to be able
to test the code when the feature is disabled (the default case).

Code size change for this commit:

   bare-arm:  -600 -0.906%
minimal x86:  -308 -0.208%
   unix x64:    +0 +0.000%
unix nanbox:    +0 +0.000%
      stm32: -3368 -0.869% PYBV10
     cc3200: -1024 -0.558%
    esp8266: -2512 -0.368% GENERIC
      esp32: -2876 -0.205% GENERIC[incl -3168(data)]
        nrf: -1708 -1.173% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-04-05 15:02:06 +10:00
Zoltán Vörös
c5cc64175b ports: Add lib/libm/roundf.c to bare-metal Makefile's.
This function is not used by the core but having it as part of the build
allows it to be used by user C modules, or board extensions.  The linker
won't include it in the final firmware if it remains unused.
2020-03-25 01:22:00 +11:00
Damien George
6ad3bb1e12 nrf: Remove custom "random" module and use extmod version instead.
Hardware RNG code is moved to drivers/rng.[ch].
2020-02-18 12:43:16 +11:00
David Lechner
e79424d672 ports: Allow overriding CROSS_COMPILE in a custom makefile.
Many ports already allow overriding CROSS_COMPILE.  This modifies the
remaining ports to allow it as well.
2019-12-27 23:53:16 +11:00
Damien George
799b6d1e0c extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the
MICROPY_VFS_FAT config to the Makefile level to replace it.  It also moves
the include of the oofatfs source files in the build from each port to a
central place in extmod/extmod.mk.

For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1
at the level of the Makefile.  This will include the relevant oofatfs files
in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
2019-11-11 11:37:38 +11:00
Damien George
d7a9388fe0 ports: Add new make target "submodules" which inits required modules. 2019-10-15 17:14:41 +11:00
Glenn Ruben Bakke
82fe6b0526 nrf: Add nrf9160 base support.
This patch add basic building blocks for nrf9P60.

It also includes a secure bootloader which forwards all
possible peripherals that are user selectable to become
non-secure. After configuring Flash, RAM and peripherals
the secure bootloader will jump to the non-secure domain
where MicroPython is placed.

The minimum size of a secure boot has to be a flash
block of 32Kb, hence why the linker scripts are
offsetting the main application this much.

The RAM offset is set to 128K, to allow for later
integration of Nordic Semiconductor's BSD socket
library which reserves the range 0x20010000 - 0x2001FFFF.
2019-10-10 21:35:27 +02:00
Glenn Ruben Bakke
60b0b69f20 nrf: Add tinyusb support for nrf52840.
Add nrf-port finyusb driver files. USB CDC can be activated
by board configuration files using the MICROPY_HW_USB_CDC.

Updating BLE driver, Makefile, nrfx-glue and main.c to plug
in the tinyusb stack.
2019-10-10 20:21:07 +02:00
Damien George
2863dcdf4f nrf: Add support to activate MICROPY_PY_SYS_STDFILES.
Fixes issue #5162.
2019-10-08 16:38:04 +11:00
Glenn Ruben Bakke
cf383412ef nrf/flash: Update flash driver to use nrfx_nvmc driver.
The the nrfx driver is aware of chip specific registers, while
the raw HAL abstraction is not. This driver enables use of NVMC
in non-secure domain for nrf9160.
2019-10-02 21:28:34 +02:00
Jim Mussared
d36fc4682e nrf/Makefile: Add support for flashing with a Black Magic Probe.
Also rename "flash" target to "deploy" to match other ports (but provide
"flash" as an alias for backwards compatibility).
2019-09-05 22:56:05 +10:00
Nguyen Hoan Hoang
9a6f6fd68d nrf/boards: Add support for BLYST Nano module based boards.
- IBK-BLYST-NANO: Breakout board
- IDK-BLYST-NANO: DevKit board with builtin IDAP-M CMSIS-DAP Debug JTAG,
  RGB led
- BLUEIO-TAG-EVIM: Sensor tag board (environmental sensor
  (T, H, P, Air quality) + 9 axis motion sensor)

Also, the LED module has been updated to support individual base level
configuration of each LED. If set, this will be used instead of the
common configuration, MICROPY_HW_LED_PULLUP. The new configuration,
MICROPY_HW_LEDX_LEVEL, where X is the LED number can be used to set
the base level of the specific LED.
2019-05-02 22:33:44 +02:00
Glenn Ruben Bakke
1f5d945afa nrf/Makefile: Update to match latest oofatfs version.
See corresponding commit b5f33ac2cb
2019-04-01 19:22:25 +02:00
Damien George
55632af70a nrf/Makefile: Make sure dependencies for pins_gen.c are correct. 2018-07-20 14:11:28 +10:00
Ayke van Laethem
8df342d330 nrf: Include $(SRC_MOD) in the build.
Also, remove the unused $(SRC_LIB).
2018-07-19 00:35:24 +10:00
Glenn Ruben Bakke
ea00717a57 nrf: Compile nlr objects with -fno-lto flag
To prevent over-optimizations of nlr and nlrthumb when -flto is used
the flag -fno-lto is set on these modules during compilation.
2018-07-18 17:12:26 +10:00