Commit Graph

29 Commits

Author SHA1 Message Date
robert-hh
29e9573de7 esp32: Use always machine_pin_get_id for getting a Pin id.
This applies to all machine modules which have pins as arguments.  Since
machine_pin_get_id() calls pin_find(), these pin arguments may be at the
moment either integer objects or Pin objects.  That allows for instance to
write

    uart = UART(1, tx=Pin(4), rx=Pin(5))

instead of

    uart = UART(1, tx=4, rx=5)

which is consistent with other ports.  Since this handling is done at a
single place in the code, extending that scheme to accept strings for named
pins is easy.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-07-20 17:33:04 +10:00
Damien George
5a9a0df340 esp32/machine_uart: Always select a source_clk value in UART config.
Fixes issue #11872.

Signed-off-by: Damien George <damien@micropython.org>
2023-06-27 13:05:33 +10:00
Damien George
e4650125b8 esp32: Update port to support IDF v5.0.2.
This commit updates the esp32 port to work exclusively with ESP-IDF v5.
IDF v5 is needed for some of the newer ESP32 SoCs to work, and it also
cleans up a lot of the inconsistencies between existing SoCs (eg S2, S3,
and C3).

Support for IDF v4 is dropped because it's a lot of effort to maintain both
versions at the same time.

The following components have been verified to work on the various SoCs:

                ESP32     ESP32-S2  ESP32-S3  ESP32-C3
    build       pass      pass      pass      pass
    SPIRAM      pass      pass      pass      N/A
    REPL (UART) pass      pass      pass      pass
    REPL (USB)  N/A       pass      pass      N/A
    filesystem  pass      pass      pass      pass
    GPIO        pass      pass      pass      pass
    SPI         pass      pass      pass      pass
    I2C         pass      pass      pass      pass
    PWM         pass      pass      pass      pass
    ADC         pass      pass      pass      pass
    WiFi STA    pass      pass      pass      pass
    WiFi AP     pass      pass      pass      pass
    BLE         pass      N/A       pass      pass
    ETH         pass      --        --        --
    PPP         pass      pass      pass      --
    sockets     pass      pass      pass      pass
    SSL         pass      ENOMEM    pass      pass
    RMT         pass      pass      pass      pass
    NeoPixel    pass      pass      pass      pass
    I2S         pass      pass      pass      N/A
    ESPNow      pass      pass      pass      pass
    ULP-FSM     pass      pass      pass      N/A
    SDCard      pass      N/A       N/A       pass
    WDT         pass      pass      pass      pass

Signed-off-by: Damien George <damien@micropython.org>
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-23 15:34:22 +10:00
patrick
a802f71908 esp32/uart: Use xtal as UART clock source on S3 and C3.
Change UART clock source on S3/C3 so the UART can operate when CPU
frequency is below 80MHz.  This allows the UART to remain operational when
using Dynamic Frequency Scaling (DFS).

Signed-off-by: Patrick Joy <patrick@joytech.com.au>
2023-05-22 10:11:24 +10:00
Jim Mussared
94beeabd2e py/obj: Convert make_new into a mp_obj_type_t slot.
Instead of being an explicit field, it's now a slot like all the other
methods.

This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:15 +10:00
Jim Mussared
6da41b5900 py/obj: Merge getiter and iternext mp_obj_type_t slots.
The goal here is to remove a slot (making way to turn make_new into a slot)
as well as reduce code size by the ~40 references to mp_identity_getiter
and mp_stream_unbuffered_iter.

This introduces two new type flags:
- MP_TYPE_FLAG_ITER_IS_ITERNEXT: This means that the "iter" slot in the
  type is "iternext", and should use the identity getiter.
- MP_TYPE_FLAG_ITER_IS_CUSTOM: This means that the "iter" slot is a pointer
  to a mp_getiter_iternext_custom_t instance, which then defines both
  getiter and iternext.

And a third flag that is the OR of both, MP_TYPE_FLAG_ITER_IS_STREAM: This
means that the type should use the identity getiter, and
mp_stream_unbuffered_iter as iternext.

Finally, MP_TYPE_FLAG_ITER_IS_GETITER is defined as a no-op flag to give
the default case where "iter" is "getiter".

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:13 +10:00
Jim Mussared
9dce82776d all: Remove unnecessary locals_dict cast.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared
662b9761b3 all: Make all mp_obj_type_t defs use MP_DEFINE_CONST_OBJ_TYPE.
In preparation for upcoming rework of mp_obj_type_t layout.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
robert-hh
5466f1b0ea esp32/machine_uart: Implement uart.flush() and uart.txdone().
uart.flush()

flush() will wait until all characters have been sent.To
avoid a permanent lock, a timeout applies depending on the
size of txbuf and the baud rate.

ret = uart.txdone()

ret is True if no transfer is in progress.
ret is False otherwise.
2022-08-31 00:18:14 +10:00
robert-hh
13dceaa4ea esp32/machine_uart: Change sendbreak time to be at least 15 bit times.
It used to be 10 bit times, which is too short.  The break state must be
longer than a regular character time, at least 13 bit times.  This is now
implemented by reducing the baudrate while sending the "0".  The break time
will now vary with data length and parity setting, but will at least be 15
bit times.

Tested with a GENERIC_SPIRAM, GENERIC_C3 and UM_TINYS2 board.
2022-08-23 17:22:15 +10:00
robert-hh
5f4539b0ca esp32/machine_uart: Implement the functionality of timeout_char arg.
Using it for the rx-timeout.  The value is given as ms, which is then
converted to character times.  A value of less than a character time will
cause the rx call to return immediately after 1 character, which may be
inefficient at high transmission rates.

Addresses #8778.
2022-06-23 17:13:41 +10:00
Jim Mussared
0e7bfc88c6 all: Use mp_obj_malloc everywhere it's applicable.
This replaces occurences of

    foo_t *foo = m_new_obj(foo_t);
    foo->base.type = &foo_type;

with

    foo_t *foo = mp_obj_malloc(foo_t, &foo_type);

Excludes any places where base is a sub-field or when new0/memset is used.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-03 22:28:14 +10:00
robert-hh
d696d9141e esp32/machine_uart: Make UART.init preserve unspecified parameters.
Most of the settings behaved that way, except for baudate, timeout,
timout_char, invert and flow.
2022-03-07 13:45:50 +11:00
Andrew Leech
919e586e46 esp32/machine_uart: Allow limited configuration of REPL UART.
Some applications may want to adjust the hard coded 115200 REPL buadrate,
and this commit allows it to be changed dynamically via machine.UART(0).
2022-03-01 18:16:50 +11:00
Will Sowerbutts
a3675294ae esp32/machine_uart: Add flow kw-arg to enable hardware flow control.
This enables optional support for the hardware UART to use the RTS and/or
CTS pins for flow control.

The new "flow" constructor keyword specifies a bitmask of RTS and/or CTS.
This matches the interface used by machine.UART on stm32 and rp2.

Previously on ESP32 it was possible to specify which pins to use for the
RTS and CTS signals, but hardware flow control was never functional: CTS
was not checked before transmitting bytes, and RTS was always driven high
(signalling no buffer space available).  With this patch, CTS and RTS both
operate as expected.

This also includes an update to the machine.UART documentation.

Signed-off-by: Will Sowerbutts <will@sowerbutts.com>
2021-08-04 13:52:15 +10:00
Damien George
59dbbe9be7 esp32: Fix use of mp_int_t, size_t and uintptr_t.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 23:58:16 +10:00
Damien George
66a86a0615 esp32: Add initial support for ESP32S2 SoCs.
Builds against IDF v4.3-beta2.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 10:31:06 +10:00
Damien George
d191d88cab esp32: Add support to build with ESP-IDF v4.1.1.
ESP-IDF v4.0.2 is still supported.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 23:11:26 +11:00
Jim Mussared
def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George
ad7213d3c3 py: Add mp_raise_msg_varg helper and use it where appropriate.
This commit adds mp_raise_msg_varg(type, fmt, ...) as a helper for
nlr_raise(mp_obj_new_exception_msg_varg(type, fmt, ...)).  It makes the
C-level API for raising exceptions more consistent, and reduces code size
on most ports:

   bare-arm:   +28 +0.042%
minimal x86:  +100 +0.067%
   unix x64:   -56 -0.011%
unix nanbox:  -300 -0.068%
      stm32:  -204 -0.054% PYBV10
     cc3200:    +0 +0.000%
    esp8266:   -64 -0.010% GENERIC
      esp32:  -104 -0.007% GENERIC
        nrf:  -136 -0.094% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-02-13 11:52:40 +11:00
Jeremy Herbert
7a7ee16ccf esp32/machine_uart: Add ability to invert UART pins. 2019-10-18 12:05:16 +11:00
Damien George
2630d3e51f esp32/machine_uart: Implement UART.deinit() method. 2019-05-15 17:01:54 +10:00
Damien George
87623082e3 esp32/machine_uart: Implement UART.sendbreak() method.
The uart_write_bytes_with_break() function requires non-zero data to be
sent before the break, so a standalone break must be synthesised.
2018-12-06 15:40:22 +11:00
Damien George
9ddc182ec7 esp32/machine_uart: Add txbuf/rxbuf keyword args to UART construct/init.
As per the machine.UART documentation, these are used to set the length of
the TX and RX buffers.
2018-12-05 16:48:34 +11:00
Damien George
4ff05ae4e9 esp32/machine_uart: Remove UART event queue object.
This event queue has UART events posted to it and they need to be drained
for it to operate without error.  The queue is not used by the uPy UART
class so it should be removed to prevent the IDF emitting errors.

Fixes #3704.
2018-04-10 15:24:10 +10:00
Damien George
34e224a4af esp32/machine_uart: Return None from UART read if no data is available.
This is instead of returning an empty bytes object, and matches how other
ports handle non-blocking UART read behaviour.
2018-03-14 13:18:43 +11:00
Damien George
23f9f9495f esp32/machine_uart: Fix check of UART id so it only allows valid UARTs. 2018-01-31 19:38:32 +11:00
Damien George
bc08c884a2 esp32: Add new port to Espressif ESP32 SoC.
This commit is a combination of 216 commits from the initial stages of
development of this port, up to and including the point where the code was
moved to the ports/esp32 directory.  These commits were mostly concerned
with setting up the build system and getting a reliable port working with
basic features.  The following is a digest of the original commits in their
original order (most recent listed first), grouped where possible per
author.  The list is here to give credit for the work and provide some
level of traceability and accountability.  For the full history of
development please consult the original repository.

All code is MIT licensed and the relevant copyright holders are listed in
the comment-header of each file.

Damien George <damien.p.george@gmail.com>
  esp32: Update to latest ESP IDF.
  esp32: Update module symlinks now that code lives under the ports dir.
  esp32: Update to compile with new ports/esp32 directory structure.
  esp32: Move it to the ports/ directory.
  esp32/machine_uart: Don't save baudrate but compute it instead.
  esp32/modsocket: Add socket.readinto() method.
  esp32/modesp: Add esp.gpio_matrix_in and esp.gpio_matrix_out functions.
  esp32/machine_uart: Wait for all data to be tx'd before changing config.

NyxCode <moritz.bischof1@gmail.com>
  esp32: Add note to README.md about updating the submodules of ESP IDF.

Anthony Briggs <anthony.briggs@gmail.com>
  esp32: Update README.md installation and flashing instructions.

Javier Candeira <javier@candeira.com>
  esp32: Raise error when setting input-only pin to output.

  With help from Adrian Smith (fon@thefon.net)

Javier Candeira <javier@candeira.com>
  esp32: Replace exception raising with corresponding mp_raise_XXX funcs.

Tisham Dhar <whatnickd@gmail.com>
  esp32: Add some specific notes about building on Windows using WSL.

Ben Gamari <ben@smart-cactus.org>
  esp32: Provide machine.Signal class.

Damien George <damien.p.george@gmail.com>
  esp32/modnetwork: Implement AP version of network.isconnected().

Eric Poulsen <eric@zyxod.com>
  esp32/README.md: Add note about btree submodule initialization.

Damien George <damien.p.george@gmail.com>
  esp32: Make firmware.bin start at 0x1000 to allow flash size autodetect.
  esp32: Changes to follow latest version of upstream uPy.
  esp32/Makefile: Separate ESP-specific inc dirs to avoid header clashes.
  esp32: Enable "btree" database module.
  esp32: Update to latest ESP IDF.

Roosted7 <thomasroos@live.nl>
  esp32: Update to latest ESP-IDF.

Alex King <alex_w_king@yahoo.com>
  esp32/machine_timer: Add support for esp32 hardware timer.

  Code lineage:
  Timer() is based loosely on the version in esp8266, although the
  implementation is differs significantly because of the change in
  the underlying platform.

Damien George <damien.p.george@gmail.com>
  esp32/machine_uart: Increase UART TX buffer size to 64.
  esp32/modules: Update dht symlink.
  esp32/mpconfigport.h: Enable utimeq module, needed for uasyncio.
  esp32: Changes to follow latest version of upstream uPy.
  esp32: Update to latest ESP-IDF.
  esp32/machine_uart: Add uart.any() method.
  esp32/machine_uart: Uninstall the UART driver before installing it.

Thomas Roos <mail@thomasroos.nl>
  esp32: Update to latest ESP-IDF.

Eric Poulsen <eric@zyxod.com>
  esp32/modsocket: Make read/write return None when in non-blocking mode.
  esp32/modsocket.c: Fix send/sendto/write for non-blocking sockets.

Odd Stråbø <oddstr13@openshell.no>
  esp32: Initial working implementation of machine.UART.

  Code lineage (as seen by previous commits): I copied the ESP8266 code,
  renamed pyb -> machine, and used esp-idf as a reference while implementing
  minimal functionality.  I provide all of my changes under the MIT license.

Odd Stråbø <oddstr13@openshell.no>
  esp32/machine_uart: Rename pyb to machine.
  esp32: Copy machine_uart.c from esp8266 port.

Damien George <damien.p.george@gmail.com>
  esp32/moduos: Add uos.ilistdir() function.
  esp32: Mount filesystem at the root of the VFS, following esp8266.

Andy Valencia <vandyswa@gmail.com>
  esp32: Add hardware SHA1/SHA256 support via mbedtls API.

  Code lineage: a copy of extmod/moduhashlib with the API invocation details
  edited.  Total derivative work.

Andy Valencia <vandyswa@gmail.com>
  esp32: Add PWM support via machine.PWM class.

  Code lineage:
  I started by copying the esp8266 machine_pwm.c. I used information from the
  ESP32 Technical Reference Manual, the esp-idf documentation, and the SDK's
  sample ledc example code (but I did not copy that code, just studied it to
  understand the SDK's API for PWM). So aside from the code copied from the
  esp8266 PWM support, everything else you see is just new code I wrote.

  I wasn't an employee of anybody when I wrote it, and I wrote it with the
  understanding and intention that it's simply a derivative work of the
  existing micropython code. I freely and willingly contribute it to the
  project and intend that it not change the legal status of the micropython
  code base in any way, even if it is included in that base in whole or part.

Damien George <damien.p.george@gmail.com>
  esp32/modules: Add symlinks for upysh and upip.

Eric Poulsen <eric@zyxod.com>
  esp32/modmachine: Add unique_id() function to machine module.

Damien George <damien.p.george@gmail.com>
  esp32: Change dac_out_voltage to dac_output_voltage for new IDF API.
  esp32: Update esp32.custom_common.ld to align with changes in ESP IDF.

Eric Poulsen <eric@zyxod.com>
  esp32: Update to latest ESP IDF.

Damien George <damien.p.george@gmail.com>
  esp32/modsocket: When resolving IP addr handle the case of host=''.
  esp32: Update to latest ESP IDF.

Eric Poulsen <eric@zyxod.com>
  esp32/Makefile: Change default FLASH_MODE to dio for WROOM-32 module.
  esp32: Move FAT FS to start at 0x200000 and increase size to 2MiB.

Damien George <damien.p.george@gmail.com>
  esp32: Remove enable_irq/disable_irq and use ATOMIC_SECTION instead.
  esp32/mpconfigport.h: Provide ATOMIC_SECTION macros.
  esp32/main: Restart the MCU if there is a failed NLR jump.

Daniel Campora <daniel@pycom.io>
  esp32: Enable threading; be sure to exit GIL when a thread will block.
  esp32: Trace the registers when doing a gc collect. Also make it thread ready.
  esp32: Add threading implementation, disabled for the time being.

Damien George <damien.p.george@gmail.com>
  esp32: Update to latest ESP IDF.
  esp32/uart: Use high-level function to install UART0 RX ISR handler.
  esp32/Makefile: Make FreeRTOS private include dir really private.

Eric Poulsen <eric@zyxod.com>
  esp32: Add support for hardware SPI peripheral (block 1 and 2).

Sergio Conde Gómez <skgsergio@gmail.com>
  esp32/modules/inisetup.py: Mount filesystem at /flash like ESP8266

Damien George <damien.p.george@gmail.com>
  esp32: Convert to use core-provided KeyboardInterrupt exception.
  esp32: Pump the event loop while waiting for rx-chr or delay_ms.
  esp32: Implement Pin.irq() using "soft" scheduled interrupts.
  esp32: Update to latest ESP IDF version.

Eric Poulsen <eric@zyxod.com>
  esp32/README: Add troubleshooting section to the end.

tyggerjai <tyggerjai@gmail.com>
  esp32: Add support for WS2812 and APA106 RGB LEDs.

Damien George <damien.p.george@gmail.com>
  esp32: Add makeimg.py script to build full firmware; use it in Makefile.
  esp32/modsocket: Make socket.read return when socket closes.
  esp32/modsocket: Initialise the timeout on an accepted socket.
  esp32/mphalport: Provide proper implementations of disable_/enable_irq.
  esp32/modmachine: Add disable_irq/enable_irq functions.

Nick Moore <nick@zoic.org>
  esp32/modsocket.c: add comment explaining timeout behaviour
  esp32/modsocket.c: clean up send methods for retries too
  esp32/modsocket.c: sockets always nonblocking, accept timeout in modsocket
  esp32: Update to latest ESP IDF version.
  esp32/modsocket.c: remove MSG_PEEK workaround on select ioctl.
  esp32/modsocket.c: Initialize tcp when modsocket loads.

Damien George <damien.p.george@gmail.com>
  esp32/main: Bump heap size from 64k to 96k.
  esp32/modutime: Add time.time() function.
  esp32/modsocket: Convert lwip errnos to uPy ones.
  esp32/modules: Provide symlink to ds18x20 module.
  esp32: Add support for onewire protocol via OneWire module.
  esp32: Add support for DHT11 and DHT22 sensors.
  esp32/mphalport: Improve delay and ticks functions.
  esp32: Update to latest ESP IDF.
  esp32/modules: Provide symlink to urequests from micropython-lib.
  esp32: Populate sys.path.

Nick Moore <nick@zoic.org>
  esp32/machine_dac.c: implement DAC pins as well
  esp32/machine_adc.c: also machine.ADC
  esp32/machine_touchpad.c: add support for touchpad

Damien George <damien.p.george@gmail.com>
  esp32/README: Add hint about using GNUmakefile on case-insensitive FS.
  esp32/mpconfigport.h: Enable maximum speed software SPI.
  esp32: Provide improved version of mp_hal_delay_us_fast.
  esp32/mpconfigport.h: Enable MICROPY_PY_BUILTINS_POW3 option.
  esp32: Update to latest ESP IDF.
  esp32: Convert to use new oofatfs library and generic VFS sub-system.
  esp32: Enable help('modules') to list builtin modules.
  esp32: Convert to use new builtin help function.

Aaron Kelly <AaronKelly@email.com>
  esp32/README: Add comment about ESP-IDF version

Damien George <damien.p.george@gmail.com>
  esp32: Consistently use size_t instead of mp_uint_t.
  esp32: Change "Micro Python" to "MicroPython" in license comments.
  esp32/Makefile: Use -C argument to git instead of cd'ing.
  esp32/help: Add section to help about using the network module.
  esp32/README: Add section about configuring and using an ESP32 board.
  esp32/README: Remove paragraph about buggy toolchain, it's now fixed.
  esp32/modnetwork: Change network init logging from info to debug.
  esp32/modnetwork: Don't start AP automatically when init'ing wifi.
  esp32/modsocket: Implement socket.setsockopt, to support SO_REUSEADDR.
  esp32: Update to latest ESP IDF.
  esp32/sdkconfig.h: Remove unused CONFIG_ESPTOOLPY_xxx config settings.
  esp32/modsocket: Add support for DGRAM and RAW, and sendto/recvfrom.
  esp32/modsocket: Fix return value of "port" in socket.accept.
  esp32/modsocket: Make socket.recv take exactly 2 args.
  esp32: Enable ussl module, using mbedtls component from ESP IDF.
  esp32/modsocket: Rename "socket" module to "usocket".
  esp32/sdkconfig: Increase max number of open sockets from 4 to 8.
  esp32/modsocket: Add error checking for creating and closing sockets.
  esp32/modsocket: Use _r (re-entrant) versions of LWIP socket API funcs.
  esp32/modsocket: Raise an exception if socket.connect did not succeed.
  esp32/modsocket: Make socket.accept return a tuple: (client, addr).
  esp32/modsocket: Use m_new_obj_with_finaliser instead of calloc.
  esp32/Makefile: Add check for IDF version, and warn if not supported.
  esp32/esp32.custom_common.ld: Update to follow changes in IDF.
  esp32: Update to latest ESP IDF.

nubcore <x@nubcore.com>
  esp32: add #define CONFIG_ESP32_WIFI_RX_BUFFER_NUM 25

Nick Moore <nick@zoic.org>
  esp32/modsocket.c: add in sendall and makefile methods #10
  esp32/modsocket.c: fixups for #10
  esp32/modsocket.c: fix copyright, socket_recv gets param and exception
  esp32/modnetwork.c: fix copyright, network.active param to bool

Damien George <damien.p.george@gmail.com>
  esp32/modnetwork: Implement wlan.isconnected() method.
  esp32/modnetwork: Add initial implementation of wlan.config().
  esp32/modnetwork: Simplify event_handler messages.

Nick Moore <nick@zoic.org>
  esp32/modsocket.c: support for ioctl, settimeout, setblocking, getaddrinfo

Damien George <damien.p.george@gmail.com>
  esp32/README: Add comment about FLASH_MODE being dio.
  esp32: Update to latest ESP IDF.
  esp32/modnetwork: Remove unnecessary indirection variable for scan list.
  esp32/modnetwork: Check that STA is active before trying to scan.
  esp32/mphalport: Replace portTICK_RATE_MS with portTICK_PERIOD_MS.
  esp32/README: Add comment about using $(HOME) in makefile.
  esp32/modnetwork: Use memset instead of bzero, the latter is deprecated.
  esp32/modnetwork: Improve error handling when STA is connecting to AP.
  esp32/Makefile: Use tab instead of spaces, and use shorter variable.

Nick Moore <nick@zoic.org>
  esp32/modsocket.c: AF_*, SOCK_* and IPPROTO_* constants
  esp32/modsocket.c: socket.settimeout implementation

Damien George <damien.p.george@gmail.com>
  esp32/Makefile: Update to latest ESP IDF.

Nick Moore <nick@zoic.org>
  esp32/modsocket.c: use mp streams for sockets
  esp32: network.WLAN.ifconfig based on esp8266 version
  esp32: Fix up exception handling
  esp32: sketchy modsocket ... revisit this once modnetwork is sorted
  esp32: First cut at modnetwork, manually rebased from prev. version

Damien George <damien.p.george@gmail.com>
  esp32/help: Update help text.
  esp32: Add info about Microbric Pty Ltd being the sponsor of this port.
  esp32: Add README.md file.
  esp32/mpconfigport.h: Add weak links to many of the builtin modules.
  esp32: Enable soft implementation of machine.SPI class.
  esp32/Makefile: Simplify APP_LD_ARGS by using OBJ variable.
  esp32/Makefile: Reorganise Makefile and add some comments.
  esp32/Makefile: Clean up CFLAGS for ESP IDF components.
  esp32/Makefile: Tidy up names of ESP IDF components, to match dir name.
  esp32/Makefile: Define and use ESPCOMP variable.
  esp32: Update to latest ESP IDF.
  esp32/main: Enable filesystem support.
  esp32: Use custom ld script to ensure correct code get placed in iram.
  esp32: Update to latest ESP IDF.
  esp32/main: Pin the uPy task to core 0.
  esp32: Update to use latest ESP IDF.
  esp32: Disable boot-up scripts, spi_flash_erase_sector no longer works.
  esp32: Add scripts to init and mount filesystem.
  esp32: Enable frozen bytecode, with scripts stored in "modules/" dir.
  esp32/modesp: Increase flash_user_start position to 1Mbyte.
  esp32/Makefile: Add "erase" target for convenient erasure.
  esp32/sdkconfig: Reorder config settings to put common things together.
  esp32/sdkconfig: Change to use single core only.
  esp32: Add esp module.
  esp32/uart.c: Make sure uart ISR handler is all in iram.
  esp32/main.c: Use ESP_TASK_PRIO_MIN + 1 for mp_task's priority.
  esp32/Makefile: Use only bare-minimum flags when compiling .S files.
  esp32/Makefile: Rename "firmware" to "application".
  esp32: Update ESP IDF version.
  esp32/Makefile: Add declarations to build bootloader and partitions.
  esp32/Makefile: When deploying, write the application last.
  esp32/Makefile: Use $(INC) variable instead of listing include dirs.
  esp32/Makefile: Use locally built versions of freertos and newlib libs.
  esp32: Add low-level uart handler with ISR and ringbuf for stdin.
  esp32: Add machine.idle() function.
  esp32: Add machine.I2C class.
  esp32: Enable machine.time_pulse_us.
  esp32: Add initial implementation of machine.Pin class.
  esp32: Prepare main.c for using xTaskCreateStatic.
  esp32: Clean up mphalport.h.
  esp32: Add initial uos module.
  esp32: Clean up mpconfigport.h, enable more features.
  esp32: Use new reset function.
  esp32: Update to latest ESP IDF.
  esp32: Add idf-version target to Makefile, to track IDF commit.
  esp32: Initial port to ESP32.
2017-12-13 14:48:53 +11:00