Commit Graph

5 Commits

Author SHA1 Message Date
robert-hh
4598b89ce9 samd: Add Pin.board and Pin.cpu classes to Pin.
For compatibility with other ports.  Code increase up to ~1250 bytes for
SAMD21.  The feature is configurable via MICROPY_PY_MACHINE_PIN_BOARD_CPU
in case flash memory is tight.
2023-02-17 17:27:21 +11:00
robert-hh
a6760bd4ef samd/modmachine: Replace the LED class by the Signal class.
It simplifies and improves the code.  The LED_Pxxx lines of the board.csv
lines can still be used, but will be taken as Pin definitions.
2022-10-25 23:39:41 +11:00
robert-hh
e5cf3fab95 samd/machine_pin: Change the pin handling and naming/numbering.
Pin numbers are now the MCU port numbers in the range:

    PA0..PA31:  0..31
    PB0..PB31: 32..63
    PC0..PC31: 64..95
    PD0..PD31: 96..127

Pins can be denoted by the GPIO port number, the name as defined in
pins.csv or a string in the form Pxnn, like "PA16" or "PD03".

The pins.c and pins.h files are now obsolete.  The pin objects are part of
the AF table.

As result of a simplification, the code now supports using pin names or
numbers instead of pin objects for modules like UART, SPI, PWM, I2C, ADC,
pininfo.
2022-10-25 23:34:07 +11:00
robert-hh
f5da77b5ce samd/machine_dac: Add the machine.DAC class.
It suuports 1 channel @ 10 bit for SAMD21, 2 channels @ 12 bit for SAMD51.

Instantiation by:

    dac = machine.DAC(ch) # 0 or 1

Method write:

    dac.write(value)

The output voltage range is 0..Vdd.
2022-10-06 22:55:10 +11:00
robert-hh
6765d4bbd6 samd/pin_af: Add the pin af table and its helper functions.
The pin af table is a representation of the MUX table from the data sheet.
It provides information for each pin about the supported device functions.

That information is needed by pin.irq, machine.ADC, machine.PWM,
machine.UART, machine.SPI and machine.I2C.  For each of these, the table
tells for each pin, which device number, af number and pad number is
assigned.  Using the table gives a straight, uniform access to the
information, where the benefit outweights the size of the table, which is
not that large.

The tables are MCU-specific.  It is not required to tell for each board,
which and where each of the above devices is available.  That makes addding
boards easy.

Note: The information for DAC and I2S was not included, since it affects
only a few pins.
2022-10-06 22:39:17 +11:00