Commit Graph

14 Commits

Author SHA1 Message Date
Damien George
b004e7e397 rp2/modmachine: Implement lightsleep() with optional sleep period.
This gets basic machine.lightsleep([n]) behaviour working on the rp2 port.
It supports:

- Calling lightsleep without a specified period, in which case it uses xosc
  dormant mode.  There's currently no way to wake it up from this state,
  unless you write to raw registers to enable a GPIO wake up source.

- Calling lightsleep with a period n in milliseconds.  This period must be
  less than about 72 minutes and uses timer alarm3 to wake it up.

The RTC continues to run during lightsleep, but other peripherals have
their clock turned off during the sleep.

It doesn't yet support longer periods than 72 minutes, or waking up from
GPIO IRQ.

Measured current consumption from the USB port on a PICO board is about
1.5mA when doing machine.lightsleep(5000), and about 0.9mA when doing
machine.lightsleep().

Addresses issue #8770.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 11:40:17 +10:00
iabdalkader
f522aabab2 rp2/modmachine: Allow boards to provide custom bootloader code.
And expose the machine_bootloader() C function so it can be used elsewhere.
2022-06-17 13:38:21 +10:00
Damien George
efe23aca71 all: Remove third argument to MP_REGISTER_MODULE.
It's no longer needed because this macro is now processed after
preprocessing the source code via cpp (in the qstr extraction stage), which
means unused MP_REGISTER_MODULE's are filtered out by the preprocessor.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 16:31:37 +10:00
Jim Mussared
4eab44a1ec extmod: Make extmod modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
robert-hh
b73d8b045a rp2/machine_bitstream: Implement the machine.bitstream driver.
Timing error is ~20ns at 125MHz, and ~10ns at 250MHz.
2021-11-17 10:01:15 +11:00
Mike Teachman
b6dbbbe82f rp2/machine_i2s: Add I2S protocol support.
This commit adds I2S protocol support for the rp2 port:
- I2S API is consistent with STM32 and ESP32 ports
- I2S configurations supported:
  - master transmit and master receive
  - 16-bit and 32-bit sample sizes
  - mono and stereo formats
  - sampling frequency
  - 3 modes of operation:
    - blocking
    - non-blocking with callback
    - uasyncio
  - internal ring buffer size can be tuned
- DMA IRQs are managed on an I2S object basis, allowing other
  RP2 entities to use DMA IRQs when I2S is not being used
- MicroPython documentation
- tested on Raspberry Pi Pico development board
- build metric changes for this commit: text(+4552), data(0), bss(+8)

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-13 12:27:42 +11:00
Damien George
af64c2ddbd extmod/machine_pwm: Factor out machine.PWM bindings to common code.
This commit refactors machine.PWM and creates extmod/machine_pwm.c.  The
esp8266, esp32 and rp2 ports all use this and provide implementations of
the required PWM functionality.  This helps to reduce code duplication and
keep the same Python API across ports.

This commit does not make any functional changes.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-04 16:31:17 +10:00
Damien George
136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Krzysztof Adamski
37d01d4be3 rp2/machine_rtc: Add initial support for RTC.
Initial support for machine.RTC on rp2 port. It only supports datetime()
method and nothing else. The method gets/returns a tuple of 8 items, just
like esp32 port, for example, but the usec parameter is ignored as the RP2
RTC only works up to seconds precision.

The Pico RTC isn't very useful as the time is lost during reset and there
seems to be no way to easily power up just the RTC clock with a low current
voltage, but still there seems to be use-cases for that, see issues #6831,
and a Thonny issue #1592. It was also requested for inclusion on v1.15
roadmap on #6832.

Signed-off-by: Krzysztof Adamski <k@japko.eu>
2021-06-12 23:02:54 +10:00
Damien George
dcaf702578 rp2/modmachine: Enable machine.Signal class.
Fixes issue #6863.

Signed-off-by: Damien George <damien@micropython.org>
2021-03-14 00:19:04 +11:00
robert-hh
c675452566 rp2/modmachine: Re-init UART for REPL on frequency change.
When UART is used for REPL and the MCU frequency is changed, the UART
has to be re-initialised.  Besides that the UART may have to be recreated
after a frequency change, but with USB REPL this is not a problem.

Thanks to @HermannSW for spotting and providing the change.
2021-03-12 00:49:30 +11:00
robert-hh
11cf742524 rp2/modmachine: Allow changing CPU clock frequency.
Using the standard machine.freq().

The safe ranges tested were 10 and 12-270MHz, at which USB REPL still
worked.  Requested settings can be checked with the script:
pico-sdk/src/rp2_common/hardware_clocks/scripts/vcocalc.py.  At frequencies
like 300MHz the script still signaled OK, but USB did not work any more.
2021-03-12 00:48:46 +11:00
Damien George
195e7dfa06 rp2/modmachine: Implement additional functions incl unique_id and idle.
Added functions in the machine module are:
- unique_id (returns 8 bytes)
- soft_reset
- idle
- lightsleep, deepsleep (not power saving at the moment)
- disable_irq, enable_irq
- time_pulse_us

Signed-off-by: Damien George <damien@micropython.org>
2021-02-02 22:14:22 +11:00
Damien George
469345e728 rp2: Add new port to Raspberry Pi RP2 microcontroller.
This commit adds a new port "rp2" which targets the new Raspberry Pi RP2040
microcontroller.

The build system uses pure cmake (with a small Makefile wrapper for
convenience).  The USB driver is TinyUSB, and there is a machine module
with most of the standard classes implemented.  Some examples are provided
in the examples/rp2/ directory.

Work done in collaboration with Graham Sanderson.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-30 00:42:29 +11:00