Commit Graph

52 Commits

Author SHA1 Message Date
Damien George
8f4c108025 all: Remove MICROPY_PY_IO_FILEIO config option.
Since commit e65d1e69e8 there is no longer an
io.FileIO class, so this option is no longer needed.

This option also controlled whether or not files supported being opened in
binary mode (eg 'rb'), and could, if disabled, lead to confusion as to why
opening a file in binary mode silently did the wrong thing (it would just
open in text mode if MICROPY_PY_IO_FILEIO was disabled).

The various VFS implementations (POSIX, FAT, LFS) were the only places
where enabling this option made a difference, and in almost all cases where
one of these filesystems were enabled, MICROPY_PY_IO_FILEIO was also
enabled.  So it makes sense to just unconditionally enable this feature
(ability to open a file in binary mode) in all cases, and so just remove
this config option altogether.  That makes configuration simpler and means
binary file support always exists (and opening a file in binary mode is
arguably more fundamental than opening in text mode, so if anything should
be configurable then it should be the ability to open in text mode).

Signed-off-by: Damien George <damien@micropython.org>
2022-08-18 11:54:17 +10:00
Damien George
d53c3b6ade unix/variants: Remove variant suffix from executable filename.
The executable now lives in the build directory, and since the build
directory already contains the variant name there is no need to also add
it to the executable.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-11 13:34:34 +10:00
Jim Mussared
092784da19 ports: Remove unused mp_type_{fileio/textio} macros in mpconfigport.h.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-26 18:07:22 +10:00
Rob Knegjens
d2e4cf00cc unix: Enable MICROPY_GC_SPLIT_HEAP on coverage build.
With a new option to evenly split the GC heap over multiple areas.  This
adds code coverage for gc_add() and code associated with
MICROPY_GC_SPLIT_HEAP.
2022-07-23 00:43:08 +10:00
David Lechner
7e4b205cb0 py/mpstate: Drop MICROPY_PORT_ROOT_POINTERS from mp_state_vm_t.
All in-tree uses of MICROPY_PORT_ROOT_POINTERS have been replaced with
MP_REGISTER_ROOT_POINTER(), so now we can remove both
MICROPY_PORT_ROOT_POINTERS and MICROPY_BOARD_ROOT_POINTERS from the code
and remaining config files.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:51:16 +10:00
Damien George
afa4d0a4b7 unix/variants/dev: Allow all config options to be overridden.
They can be overridden on the make command line, for example.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-29 12:48:33 +10:00
Damien George
510bea9383 unix/variants/coverage: Change config to use ROM level everything.
This ROM level is not yet fully defined, but it at least enables
MICROPY_PY_SYS_TRACEBACKLIMIT.  The coverage build should have everything
enabled, so it makes sense to use this ROM level for it.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-29 12:48:33 +10:00
Damien George
fad978ae5f unix/variants: Enable remaining options on dev,coverage from ROM extra.
So that the default configuration for the dev and coverage variants
includes all options set by MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES.

Note that enabling MICROPY_PY_SYS_STDIO_BUFFER on unix doesn't do anything
because unix doesn't use shared/runtime/sys_stdio_mphal.c.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-29 12:23:11 +10:00
Damien George
fe55d3e016 unix/variants: Move setting of MICROPY_PY_USELECT to port config file.
The default is the same as before: MICROPY_PY_USELECT=0 and
MICROPY_PY_USELECT_POSIX=1.  But now this can be easily overridden at the
make command-line using, eg:

    make VARIANT=dev CFLAGS_EXTRA=-DMICROPY_PY_USELECT=1

Signed-off-by: Damien George <damien@micropython.org>
2022-06-29 12:22:56 +10:00
Damien George
ac3fb974bc unix/variants: Enable seeding random module on import in dev, coverage.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 23:41:49 +10:00
Damien George
6e71cde6aa ports: Use default VFS config for import_stat and builtin_open.
For ports with MICROPY_VFS and MICROPY_PY_IO enabled their configuration
can now be simplified to use the defaults for mp_import_stat and
mp_builtin_open.

This commit makes no functional change, except for the following minor
points:
- the built-in "open" is removed from the minimal port (it previously did
  nothing)
- the duplicate built-in "input" is removed from the esp32 port
- qemu-arm now delegates to VFS import/open

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Damien George
fca5701f74 py/malloc: Introduce m_tracked_calloc, m_tracked_free functions.
Enabled by MICROPY_TRACKED_ALLOC.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-05 10:31:50 +10:00
Damien George
5c32111fa0 ports: Reformat more C and Python source code.
These files that are reformatted only now fall under the list of files to
apply uncrustify/black formatting to.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-20 16:17:35 +10:00
Damien George
eec07332b1 unix/variants: Enable a few optimisations and features on dev, coverage.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 13:34:43 +11:00
Damien George
3c20ddb41a unix/variants: Use rom feature config for standard, dev, coverage.
This change is a no-op in terms of functionality.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 13:32:25 +11:00
Damien George
ac2293161e py/modsys: Add optional mutable attributes sys.ps1/ps2 and use them.
This allows customising the REPL prompt strings.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 10:58:33 +11:00
Damien George
cac939ddc3 py/modsys: Add optional sys.tracebacklimit attribute.
With behaviour as per CPython.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 10:43:21 +11:00
Damien George
2b409ef8a4 unix/moduos: Convert module to use extmod version.
All variants now use extmod/moduos.c as their uos module implementation.
In particular this means they all have MICROPY_VFS enabled and use VfsPosix
for their filesystem.

As part of this, the available functions in uos become more consistent with
other ports:
- coverage variant gets uos.urandom
- minimal and standard variant get: unlink, chdir, getcwd, listdir

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 21:13:57 +11:00
Damien George
c4b8dae438 tests/unix: Add coverage test for freezing various objects.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-28 19:02:58 +11:00
stijn
dd6967202a py/modmath: Add math.tau, math.nan and math.inf constants.
Configurable by the new MICROPY_PY_MATH_CONSTANTS option.
2022-01-23 09:28:33 +11:00
Damien George
aac5a97d08 ports: Move '.frozen' to second entry in sys.path.
In commit 86ce442607 the '.frozen' entry was
added at the start of sys.path, to allow control over when frozen modules
are searched during import, and retain existing behaviour whereby frozen
was searched before the filesystem.

But Python semantics of sys.path require sys.path[0] to be the directory of
the currently executing script, or ''.

This commit moves the '.frozen' entry to second place in sys.path, so
sys.path[0] retains its correct value (described above).

Signed-off-by: Damien George <damien@micropython.org>
2021-12-29 23:55:36 +11:00
Jim Mussared
86ce442607 ports: Add '.frozen' as the first entry in sys.path.
Frozen modules will be searched preferentially, but gives the user the
ability to override this behavior.

This matches the previous behavior where "" was implicitly the frozen
search path, but the frozen list was checked before the filesystem.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-18 00:08:07 +11:00
Jim Mussared
cc23e99f32 py/modio: Remove io.resource_stream function.
This feature is not enabled on any port, it's not in CPython's io module,
and functionality is better suited to the micropython-lib implementation of
pkg_resources.
2021-12-17 23:53:44 +11:00
Jim Mussared
b326edf68c all: Remove MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE.
This commit removes all parts of code associated with the existing
MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE optimisation option, including the
-mcache-lookup-bc option to mpy-cross.

This feature originally provided a significant performance boost for Unix,
but wasn't able to be enabled for MCU targets (due to frozen bytecode), and
added significant extra complexity to generating and distributing .mpy
files.

The equivalent performance gain is now provided by the combination of
MICROPY_OPT_LOAD_ATTR_FAST_PATH and MICROPY_OPT_MAP_LOOKUP_CACHE (which has
been enabled on the unix port in the previous commit).

It's hard to provide precise performance numbers, but tests have been run
on a wide variety of architectures (x86-64, ARM Cortex, Aarch64, RISC-V,
xtensa) and they all generally agree on the qualitative improvements seen
by the combination of MICROPY_OPT_LOAD_ATTR_FAST_PATH and
MICROPY_OPT_MAP_LOOKUP_CACHE.

For example, on a "quiet" Linux x64 environment (i3-5010U @ 2.10GHz) the
change from CACHE_MAP_LOOKUP_IN_BYTECODE, to LOAD_ATTR_FAST_PATH combined
with MAP_LOOKUP_CACHE is:

diff of scores (higher is better)
N=2000 M=2000       bccache -> attrmapcache      diff      diff% (error%)
bm_chaos.py        13742.56 ->   13905.67 :   +163.11 =  +1.187% (+/-3.75%)
bm_fannkuch.py        60.13 ->      61.34 :     +1.21 =  +2.012% (+/-2.11%)
bm_fft.py         113083.20 ->  114793.68 :  +1710.48 =  +1.513% (+/-1.57%)
bm_float.py       256552.80 ->  243908.29 : -12644.51 =  -4.929% (+/-1.90%)
bm_hexiom.py         521.93 ->     625.41 :   +103.48 = +19.826% (+/-0.40%)
bm_nqueens.py     197544.25 ->  217713.12 : +20168.87 = +10.210% (+/-3.01%)
bm_pidigits.py      8072.98 ->    8198.75 :   +125.77 =  +1.558% (+/-3.22%)
misc_aes.py        17283.45 ->   16480.52 :   -802.93 =  -4.646% (+/-0.82%)
misc_mandel.py     99083.99 ->  128939.84 : +29855.85 = +30.132% (+/-5.88%)
misc_pystone.py    83860.10 ->   82592.56 :  -1267.54 =  -1.511% (+/-2.27%)
misc_raytrace.py   21490.40 ->   22227.23 :   +736.83 =  +3.429% (+/-1.88%)

This shows that the new optimisations are at least as good as the existing
inline-bytecode-caching, and are sometimes much better (because the new
ones apply caching to a wider variety of map lookups).

The new optimisations can also benefit code generated by the native
emitter, because they apply to the runtime rather than the generated code.
The improvement for the native emitter when LOAD_ATTR_FAST_PATH and
MAP_LOOKUP_CACHE are enabled is (same Linux environment as above):

diff of scores (higher is better)
N=2000 M=2000        native -> nat-attrmapcache  diff      diff% (error%)
bm_chaos.py        14130.62 ->   15464.68 :  +1334.06 =  +9.441% (+/-7.11%)
bm_fannkuch.py        74.96 ->      76.16 :     +1.20 =  +1.601% (+/-1.80%)
bm_fft.py         166682.99 ->  168221.86 :  +1538.87 =  +0.923% (+/-4.20%)
bm_float.py       233415.23 ->  265524.90 : +32109.67 = +13.756% (+/-2.57%)
bm_hexiom.py         628.59 ->     734.17 :   +105.58 = +16.796% (+/-1.39%)
bm_nqueens.py     225418.44 ->  232926.45 :  +7508.01 =  +3.331% (+/-3.10%)
bm_pidigits.py      6322.00 ->    6379.52 :    +57.52 =  +0.910% (+/-5.62%)
misc_aes.py        20670.10 ->   27223.18 :  +6553.08 = +31.703% (+/-1.56%)
misc_mandel.py    138221.11 ->  152014.01 : +13792.90 =  +9.979% (+/-2.46%)
misc_pystone.py    85032.14 ->  105681.44 : +20649.30 = +24.284% (+/-2.25%)
misc_raytrace.py   19800.01 ->   23350.73 :  +3550.72 = +17.933% (+/-2.79%)

In summary, compared to MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE, the new
MICROPY_OPT_LOAD_ATTR_FAST_PATH and MICROPY_OPT_MAP_LOOKUP_CACHE options:
- are simpler;
- take less code size;
- are faster (generally);
- work with code generated by the native emitter;
- can be used on embedded targets with a small and constant RAM overhead;
- allow the same .mpy bytecode to run on all targets.

See #7680 for further discussion.  And see also #7653 for a discussion
about simplifying mpy-cross options.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-09-16 16:04:03 +10:00
Jim Mussared
60c6d5594f unix: Enable LOAD_ATTR fast path, and map lookup caching.
Enabled for all variants except minimal.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-09-16 16:02:19 +10:00
Damien George
6430cd3e02 unix/variants: Enable help and help("modules") on standard and dev.
See related #1354, #2906, #3436.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-13 16:18:15 +10:00
Damien George
d87f42b0e5 examples/usercmodules: Simplify user C module enabling.
It's a bit of a pitfall with user C modules that including them in the
build does not automatically enable them.  This commit changes the docs and
examples for user C modules to encourage writers of user C modules to
enable them unconditionally.  This makes things simpler and covers most use
cases.

See discussion in issue #6960, and also #7086.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-01 16:27:38 +11:00
Damien George
a866f868f8 unix/Makefile: Move coverage.c and coveragecpp.cpp to coverage variant.
So that g++ is not needed to build a non-coverage unix variant.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-29 23:30:04 +11:00
stijn
25c4563f26 examples: Add example code for user C modules, both C and C++.
Add working example code to provide a starting point for users with files
that they can just copy, and include the modules in the coverage test to
verify the complete user C module build functionality.  The cexample module
uses the code originally found in cmodules.rst, which has been updated to
reflect this and partially rewritten with more complete information.
2020-10-29 15:30:42 +11:00
Damien George
817b80a102 unix/variants: Enable MICROPY_DEBUG_PARSE_RULE_NAME on coverage build.
Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 15:26:43 +10:00
Damien George
42342fa3cb tests/basics: Add test for MICROPY_PY_ALL_INPLACE_SPECIAL_METHODS ops.
And enable this feature on unix, the coverage variant.  The .exp test file
is needed so the test can run on CPython versions prior to "@=" operator
support.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 18:40:42 +10:00
Jim Mussared
1b1b22905e unix: Implement BLE H4 HCI UART for btstack/nimble.
This commit adds support for using Bluetooth on the unix port via a H4
serial interface (distinct from a USB dongle), with both BTstack and NimBLE
Bluetooth stacks.

Note that MICROPY_PY_BLUETOOTH is now disabled for the coverage variant.
Prior to this commit Bluetooth was anyway not being built on Travis because
libusb was not detected.  But now that bluetooth works in H4 mode it will
be built, and will lead to a large decrease in coverage because Bluetooth
tests cannot be run on Travis.
2020-09-08 12:53:24 +10:00
Damien George
836bca9956 unix/variants: Fix fast and freedos variants so they build again.
This regressed in bd2fff6687

Signed-off-by: Damien George <damien@micropython.org>
2020-08-30 13:48:26 +10:00
Damien George
f5dd46b479 unix/variants: Enable VFS and all supported filesystems on dev variant.
So that micropython-dev can be used to test VFS code, and inspect and build
filesystem images that are compatible with bare-metal systems.

Signed-off-by: Damien George <damien@micropython.org>
2020-07-08 23:57:25 +10:00
Jim Mussared
4050281311 unix: Enable uasyncio on dev variant. 2020-07-01 22:44:41 +10:00
Jim Mussared
27abac95d8 unix: Make manifest selection match other ports.
Changes are:
- The default manifest.py is moved to the variants directory (it's in
  "boards" in other ports).
- The coverage variant now uses a custom manifest in its variant directory
  to add frzmpy/frzstr.
- The frzmpy/frzstr tests are moved to variants/coverage/.
2020-07-01 22:42:55 +10:00
Damien George
5c8bf12acf all: Fix auto-enable of MICROPY_GCREGS_SETJMP to select GC behaviour.
Only enable it if MICROPY_GCREGS_SETJMP is not already defined, and no
supported architecture is defined.
2020-04-30 16:49:42 +10:00
Jim Mussared
710426024a all: Factor gchelper code to one place and use it for unix & ARM ports.
No functionality change is intended with this commit, it just consolidates
the separate implementations of GC helper code to the lib/utils/ directory
as a general set of helper functions useful for any port.  This reduces
duplication of code, and makes it easier for future ports or embedders to
get the GC implementation correct.

Ports should now link against gchelper_native.c and either gchelper_m0.s or
gchelper_m3.s (currently only Cortex-M is supported but other architectures
can follow), or use the fallback gchelper_generic.c which will work on
x86/x64/ARM.

The gc_helper_get_sp function from gchelper_m3.s is not really GC related
and was only used by cc3200, so it has been moved to that port and renamed
to cortex_m3_get_sp.
2020-04-29 23:45:19 +10:00
Jim Mussared
af226199ea unix: Enable modbluetooth on the "dev" and "coverage" variants.
And MICROPY_PY_URANDOM_EXTRA_FUNCS is enabled on "dev" so tha the Bluetooth
examples all run.
2020-04-29 16:53:13 +10:00
stijn
30840ebc99 all: Enable extra conversion warnings where applicable.
Add -Wdouble-promotion and -Wfloat-conversion for most ports to ban out
implicit floating point conversions, and add extra Travis builds using
MICROPY_FLOAT_IMPL_FLOAT to uncover warnings which weren't found
previously.  For the unix port -Wsign-comparison is added as well but only
there since only clang supports this but gcc doesn't.
2020-04-18 22:42:28 +10:00
Jim Mussared
45cf76465c unix: Fix behaviour of COPT/NDEBUG for unix variants.
Based on eg 1e6fd9f2b4, it's understood that
the intention for unix builds is that regular builds disable assert, but
the coverage build should set -O0 and enable asserts.

It looks like this didn't work (even before variants were introduced, eg at
v1.11) -- coverage always built with -Os and -DNDEBUG.

This commit makes it possible for variants to have finer-grained control
over COPT flags, and enables assert() and -O0 on coverage builds.

Other variants already match the defaults so they have been updated.
2020-04-13 21:20:32 +10:00
Jim Mussared
073b9a5eb8 ports: Enable error text compression for various ports, but not all.
Enabled on: bare-arm, minimal, unix coverage/dev/minimal, stm32, esp32,
esp8266, cc3200, teensy, qemu-arm, nrf.  Not enabled on others to be able
to test the code when the feature is disabled (the default case).

Code size change for this commit:

   bare-arm:  -600 -0.906%
minimal x86:  -308 -0.208%
   unix x64:    +0 +0.000%
unix nanbox:    +0 +0.000%
      stm32: -3368 -0.869% PYBV10
     cc3200: -1024 -0.558%
    esp8266: -2512 -0.368% GENERIC
      esp32: -2876 -0.205% GENERIC[incl -3168(data)]
        nrf: -1708 -1.173% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-04-05 15:02:06 +10:00
Damien George
91dd3948e8 unix: Enable uasyncio C helper module on coverage build. 2020-03-26 01:25:45 +11:00
Damien George
2cdf1d25f5 unix: Remove custom file implementation to use extmod's VFS POSIX one.
The implementation in extmod/vfs_posix_file.c is now equivalent to that in
ports/unix/file.c, so remove the latter and use the former instead.
2020-03-18 21:01:07 +11:00
Andrew Leech
86bfabec11 py/modmicropython: Add heap_locked function to test state of heap.
This commit adds micropython.heap_locked() which returns the current
lock-depth of the heap, and can be used by Python code to check if the heap
is locked or not.  This new function is configured via
MICROPY_PY_MICROPYTHON_HEAP_LOCKED and is disabled by default.

This commit also changes the return value of micropython.heap_unlock() so
it returns the current lock-depth as well.
2020-03-11 16:54:16 +11:00
David Lechner
4af79e7694 unix/Makefile: Allow to install all variants of the executable.
The install target is current broken when PROG is used to override the
default executable name.  This fixes it by removing the redundant TARGET
variable and uses PROG directly instead.

The install and uninstall targets are also moved to the common unix
Makefile so that all variants can be installed in the same way.
2020-02-16 23:37:40 +11:00
David Lechner
c5f4268c99 unix/variants/standard: Fix role of PREFIX when used to install.
Currently it is not possible to override PREFIX when installing micropython
using the makefile.  It is common practice to be able to run something like
this:

    $ make install PREFIX=/usr DESTDIR=/tmp/staging

This fixes such usage.
2020-02-16 23:35:52 +11:00
Damien George
96716b46e1 unix/Makefile: Reserve CFLAGS_EXTRA/LDFLAGS_EXTRA for external use.
When CFLAGS_EXTRA/LDFLAGS_EXTRA (or anything) is set on the command line of
a make invocation then it will completely override any setting or appending
of these variables in the makefile(s).  This means builds like the coverage
variant will have their mpconfigvariant.mk settings overridden.  Fix this
by using CFLAGS/LDFLAGS exclusively in the makefile(s), reserving the
CFLAGS_EXTRA/LDFLAGS_EXTRA variables for external command-line use only.
2020-01-24 11:51:21 +11:00
Yonatan Goldschmidt
853aaa06f2 lib/mp-readline: Add word-based move/delete EMACS key sequences.
This commit adds backward-word, backward-kill-word, forward-word,
forward-kill-word sequences for the REPL, with bindings to Alt+F, Alt+B,
Alt+D and Alt+Backspace respectively.  It is disabled by default and can be
enabled via MICROPY_REPL_EMACS_WORDS_MOVE.

Further enabling MICROPY_REPL_EMACS_EXTRA_WORDS_MOVE adds extra bindings
for these new sequences: Ctrl+Right, Ctrl+Left and Ctrl+W.

The features are enabled on unix micropython-coverage and micropython-dev.
2020-01-12 13:09:27 +11:00
Jim Mussared
977b532c8f unix: Rename unix binaries to micropython-variant (not _variant).
For consistency with mpy-cross, and other unix tools in general.
2020-01-12 10:37:40 +11:00