Commit Graph

57 Commits

Author SHA1 Message Date
robert-hh
057f3b0020 samd/mpconfigport: Enable DHT and onewire drivers on all MCUs/boards.
And move the setting to the samd-generic files, now that both samd21
and samd51 support it.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-27 14:58:07 +10:00
robert-hh
5ef7ce5116 samd/Makefile: Print memory region usage instead of totals.
Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-27 14:58:07 +10:00
robert-hh
cfaa9a4997 samd/Makefile: Move the math lib files from mpconfigmcu.mk to Makefile.
They are used by both SAMD21 and SAMD51.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-27 14:58:07 +10:00
Damien George
f01d5fb657 py/mkrules.mk: Automatically configure frozen options when manifest set.
Following how mkrules.cmake works.  This makes it easy for a port to enable
frozen code, by defining FROZEN_MANIFEST in its Makefile.

Signed-off-by: Damien George <damien@micropython.org>
2023-06-08 23:12:56 +10:00
robert-hh
69cb5e8f2a samd: Adapt existing samd.Flash and integrate with (Q)SPI flash in boot.
Checks are added to ensure, that only one of the flash drivers is selected.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-06 00:49:36 +10:00
robert-hh
315eb949da samd: Rearrange the MCU-specific loader files.
Such that they are easier to adapt.  The maximum code size is set by:

    MICROPY_HW_CODESIZE=xxxK

in mpconfigmcu.mk for the MCU family as default or in mpconfigboard.mk for
a specific board.  Setting the maximum code size allows the loader to error
out if the code gets larger than the space dedicated for it.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-05-22 18:36:29 +10:00
Damien George
d7cb53cb60 samd/modutime: Use extmod version of time module.
No API or functional change.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:51 +10:00
Jim Mussared
69b93527d5 ports: Make BOARD default from BOARD_DIR in Makefile's.
This allows:

    $ make BOARD_DIR=path/to/board

to infer BOARD=board, rather than the previous behavior that required
additionally setting BOARD explicitly.

Also makes the same change for VARIANT_DIR -> VARIANT on Unix.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2023-02-23 09:47:08 +11:00
robert-hh
17ab2f671b samd: Support entering bootloader via USB CDC 1200bps touch. 2022-12-14 12:50:04 +11:00
Jim Mussared
f34eedeb1b samd/Makefile: Set MPY_CROSS_FLAGS.
Otherwise this port will be unable to freeze `@native`/`@viper` code.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-11-17 22:10:41 +11:00
Jim Mussared
92c35efb63 samd: Move MCU-specific CFLAGS to mpconfigmcu.mk.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-11-17 22:10:40 +11:00
Damien George
6643b4f0cc samd/machine_timer: Use extmod version of machine.Timer.
Signed-off-by: Damien George <damien@micropython.org>
2022-10-27 14:45:24 +11:00
robert-hh
a6760bd4ef samd/modmachine: Replace the LED class by the Signal class.
It simplifies and improves the code.  The LED_Pxxx lines of the board.csv
lines can still be used, but will be taken as Pin definitions.
2022-10-25 23:39:41 +11:00
robert-hh
e5cf3fab95 samd/machine_pin: Change the pin handling and naming/numbering.
Pin numbers are now the MCU port numbers in the range:

    PA0..PA31:  0..31
    PB0..PB31: 32..63
    PC0..PC31: 64..95
    PD0..PD31: 96..127

Pins can be denoted by the GPIO port number, the name as defined in
pins.csv or a string in the form Pxnn, like "PA16" or "PD03".

The pins.c and pins.h files are now obsolete.  The pin objects are part of
the AF table.

As result of a simplification, the code now supports using pin names or
numbers instead of pin objects for modules like UART, SPI, PWM, I2C, ADC,
pininfo.
2022-10-25 23:34:07 +11:00
robert-hh
fc9d66fac6 samd/machine_rtc: Add the machine.RTC class.
Methods implemented are:
- rtc.init(date)
- rtc.datetime([new_date])
- rtc.calibration(value)

The presence of this class can be controlled by MICROPY_PY_MACHINE_RTC.  If
the RTC module is used, the time module uses the RTC as well.

For boards without a 32kHz crystal, using RTC makes no sense, since it will
then use the ULP32K oscillator, which is not precise at all.  Therefore, it
will by default only be enabled for boards using a crystal, but can be
enabled in the respective mpconfigboard.h.
2022-10-25 23:20:09 +11:00
robert-hh
4c9e4c3310 samd/mcu/samd51: Enable FAT support for SAMD51.
Tested with a SD card connected to a SAMD51 board.  The SEEED WIO terminal
has a SD-Card reader built-in.

Also a side change to remove a few obsolete lines from Makefile.
2022-10-25 23:07:23 +11:00
Jim Mussared
b25087fc6f samd/Makefile: Split up SRC_C variables.
This improves clarity a bit, but also ensures that only the required files
are added to SRC_QSTR.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-12 00:10:18 +11:00
Jim Mussared
d6d8722558 extmod: Make extmod.mk self-contained.
This makes it so that all a port needs to do is set the relevant variables
and "include extmod.mk" and doesn't need to worry about adding anything to
OBJ, CFLAGS, SRC_QSTR, etc.

Make all extmod variables (src, flags, etc) private to extmod.mk.

Also move common/shared, extmod-related fragments (e.g. wiznet, cyw43,
bluetooth) into extmod.mk.

Now that SRC_MOD, CFLAGS_MOD, CXXFLAGS_MOD are unused by both extmod.mk
(and user-C-modules in a previous commit), remove all uses of them from
port makefiles.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:31:49 +11:00
Jim Mussared
3cc6decfc4 py/py.mk: Make user-C-module handling self-contained in py.mk.
Removes the need for the port to add anything to OBJS or SRC_QSTR.

Also makes it possible for user-C-modules to differentiate between code
that should be processed for QSTR vs other files (e.g. helpers and
libraries).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:23:18 +11:00
Jim Mussared
67d05ed02b ports: Make generated pin.c handling more consistent across ports.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:18:46 +11:00
Jim Mussared
17f2783e4a all: Use += rather than = everywhere for CFLAGS/LDFLAGS/LIBS.
This avoids a surprise where an = can cancel out an earlier +=.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:17:41 +11:00
robert-hh
e9a76310ec samd/mphalport: Fix USB endpoint handling ignoring Ctrl-C.
Porting PR #8040 by @hoihu to SAMD, following the commit
5873390226.

One small addition: before executing keyboard interrupt, the input buffer
is cleared.
2022-10-06 23:08:22 +11:00
robert-hh
b001730462 samd/Makefile: Fix a dependency problem with "make -j".
The build directory was not created before attempting to create the
generated files in it.
2022-10-06 23:08:00 +11:00
robert-hh
85fb8b8b02 samd/pin_af: Simplify the pin-af-table handling.
Changes are:
- The pin-af-table-SAMDxx.csv file are moved to the mcu directories with
  the name as pin-af-table.csv.
- The handling in Makefile and pin_af.c is simplified.
2022-10-06 23:05:46 +11:00
robert-hh
f00356a486 samd/clock_config: Split clock_config.c to separate SAMD21/SAMD51 files.
And put the file into the mcu directory.  The file got a little bit long
and hard to read.
2022-10-06 23:01:58 +11:00
robert-hh
929dfc66a3 samd/mpconfigport: Restructure to use ROM feature levels.
Changes are:
- Set the feature level for each MCU: CORE features for SAMD21, and EXTRA
  features for SAMD51.
- Remove all definitions that are included in the core feature level.
- Keep the default settings for feature level and float, to make the choice
  obvious.
2022-10-06 23:00:44 +11:00
robert-hh
a415752173 samd/machine_bitstream: Add the machine.bitstream() function.
The SAMD21 implementation is an adaption of @jimmo's code for STM32Lxx.
The only changes are the addresses and names of the port registers and the
timing parameters.

SAMD21: The precision is about +/-25ns at 48MHz clock frequency.  The first
two cycles are about 40-60 ns longer than set.  But still good enough to
drive a neopixel device.

SAMD51: The precision is about +/-30ns at 120MHz clock frequency.  Good
enough to drive a neopixel device.
2022-10-06 23:00:00 +11:00
robert-hh
aa6dbbcffd samd/mcu: Factor out MCU policy for SAMD21 and SAMD51.
Which contains a mpconfigmcu.h, mpconfigmcu.mk and manifest.py file for
each MCU group.  That looks better than the previous choice.
2022-10-06 22:56:13 +11:00
robert-hh
f5da77b5ce samd/machine_dac: Add the machine.DAC class.
It suuports 1 channel @ 10 bit for SAMD21, 2 channels @ 12 bit for SAMD51.

Instantiation by:

    dac = machine.DAC(ch) # 0 or 1

Method write:

    dac.write(value)

The output voltage range is 0..Vdd.
2022-10-06 22:55:10 +11:00
robert-hh
7a2f2d88f7 samd/machine_wdt: Add the machine.WDT class. 2022-10-06 22:53:06 +11:00
robert-hh
32c973d554 samd/machine_timer: Add machine.Timer based on the shared soft-timer. 2022-10-06 22:52:39 +11:00
robert-hh
15212ae8d4 samd/moduos: Add uos.dupterm(). 2022-10-06 22:49:19 +11:00
robert-hh
94d27ae28f samd/machine_i2c: Add the machine.I2C class.
Using the common API.  Tested with SAMD21 and SAMD51 boards.
2022-10-06 22:49:06 +11:00
robert-hh
aa870708ac samd/machine_spi: Add the machine.SPI class.
Suported by both SAMD21 and SAMD51.  It follows the generic API, except for
the bits=nn option, which is not implemented (yet).
2022-10-06 22:48:44 +11:00
robert-hh
b33f204529 samd/machine_uart: Add the machine.UART class.
All board pins that have UART's assigned can be used.  Baud rate range is
75 Baud to ~2 MBaud.

No flow control yet, and only RX is buffered.  TX buffer and flow control
may be added later for SAMD51 with its larger RAM and Flash.
2022-10-06 22:48:12 +11:00
robert-hh
4b6f6ccf88 samd/machine_pin: Add pin.irq() to the machine.Pin class.
Its API conforms to the docs.  There are 16 IRQ channels available, which
will be used as assignable to the GPIO numbers.  In most cases, the irq
channel is GPIO_no % 16.
2022-10-06 22:46:53 +11:00
robert-hh
d693758ab2 samd/machine_pwm: Add the machine.PWM class.
Features are:
- 3 to 5 different frequency groups.
- Freq range of 1Hz - 24 MHz.
- Duty rate stays stable on freq change.

Keyword options to the PWM constructor:
- device=n Select a specific PWM device.  If no device is specified, a free
           device is chosen, if available at that pin.
- freq=nnnn
- duty_u16=nnnn
- duty_ns=nnnn
- invert=True/False Allowing two outputs on the same device/channel to have
                    complementary signals.

If both freq and duty are provided, PWM output will start immediately.

Pins at the same device have the same frequency.  If the PWM output number
exceeds the number of channels at the PWM device, the effctive channel_no
is output_no % channel_count.  So with a channel count of 4, output 7 is
assigned to channel 3.  Pins at a certain channel have the same frequency
and duty rate, but may be seperately inverted.
2022-10-06 22:42:55 +11:00
robert-hh
5c7e93ec48 samd/machine_adc: Add the machine.ADC class.
With the method read_u16().  Keyword arguments of the constructor are:
- bits=n    The resolution; default is 12.
- average=n The average of samples, which are taken and cumulated.  The
            default value is 16.  Averaging by hw is faster than averaging
            in code.

The ADC runs at a clock freq 1.5 MHz.  A single 12 bit conversion takes
8 microseconds.
2022-10-06 22:41:44 +11:00
robert-hh
6c037af086 samd/boards: Create pin_af_table.c from pin_af_table_SAMDxx.csv files.
This step just creates the table.  The firmware cannot be built at this
commit.  The next commit will complete the pin-af mechanism.
2022-10-06 22:38:45 +11:00
robert-hh
4013577af2 samd/modmachine: Enable SoftSPI and SoftI2C. 2022-10-06 22:38:33 +11:00
robert-hh
b4d29fd47a samd/clock_config: Set up the clock configuration.
Clock settings:
- GCLK0: 48 MHz (SAMD21) or 120 MHz(SAMD51).
- GCLK1: 32768 Hz for driving the PLL.
- GCLK2: 48 MHz for tzhe peripheral clock.
- GCLK3: 1 MHz (SAMD21) or 8 MHz (SAMD51) for the µs ticks timer.
- GCLK8: 1 kHz for WDT (SAMD21 only).

If a 32 kHz crystal is present, it will be used as clock source.  Otherwise
the DFLL48M in open-loop mode is used.

GCLK0 for SAM51 can be changed between 48 MHz and 200 MHz.  The specified
range is 96 MHz - 120 MHz.
2022-10-06 22:33:31 +11:00
robert-hh
c4f7c0b8a2 samd/Makefile: Alphabetically sort the source code files in Makefile. 2022-10-06 22:31:03 +11:00
robert-hh
a5d5ecbf84 samd/boards: Move mcu-specific settings into a mpconfig_samdXX.h file.
Located at the boards directory. That way, the mpconfigboard.h files are
almost empty, just setting the board name and the MCU name.
2022-10-06 22:30:37 +11:00
robert-hh
0420799a84 samd/boards: Replace pins.c and pins.h by pins.csv.
The files pins.c and pins.h are generated during the build process from
pins.csv, using a make-pins.py script.
2022-10-06 22:29:49 +11:00
Jim Mussared
be83c08f46 ports: Always append to GIT_SUBMODULES.
Avoids overwriting submodules required by base makefiles.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-03 00:05:26 +10:00
Angus Gratton
fdfe4eca74 ports: Always include debug information in the ELF.
For bare metal ARM & xtensa targets, passing -g will make the ELF file
larger but doesn't change the binary size.  However, this means tools like
gdb, addr2line, etc can extract source-level information from the ELF.

Also standardise -ggdb to -g, these produce the exact same ELF file on
arm-none-eabi-gcc and will use DWARF format for all these ports.
2022-07-29 11:24:00 +10:00
David Lechner
81dbea1ce3 shared/readline: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register the readline_history root
pointer array used by shared/readline.c and removes the registration from
all mpconfigport.h files.

This also required adding a new MICROPY_READLINE_HISTORY_SIZE config option
since not all ports used the same sized array.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:49 +10:00
David Lechner
c118b5d0e4 extmod/extmod.mk: Separate out extmod file list from py.mk to extmod.mk.
This separates extmod source files from `py.mk`.  Previously, `py.mk`
assumed that every consumer of the py/ directory also wanted to include
extmod/.  However, this is not the case.  For example, building mpy-cross
uses py/ but doesn't need extmod/.

This commit moves all extmod-specific items from `py.mk` to `extmod.mk` and
explicitly includes `extmod.mk` in ports that use it.

Signed-off-by: David Lechner <david@pybricks.com>
2022-06-21 00:14:34 +10:00
Damien George
94077c6402 samd/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Peter van der Burg
cd2223b8fe samd: Integrate latest asf4, add help, more time funcs and uPy features.
- Makefile: update to use new ASF4 files, support frozen manifest, and
  include source files in upcoming commits
- boards/manifest.py: add files to freeze
- boards/samd51p19a.ld: add linker script for this MCU
- help.c: add custom help text
- main.c: execute _boot.py, boot.py and main.py on start-up
- modules/_boot.py: startup file to freeze
- modutime.c: add gmtime, localtime, mktime, time functions
- mpconfigport.h: enabled more features for sys and io and modules
- mphalport.h: add mp_hal_pin_xxx macros
- mphalport.c: add mp_hal_stdio_poll
2021-11-19 11:05:05 +11:00