Commit Graph

35 Commits

Author SHA1 Message Date
Damien George
a4f1d82757 py/nativeglue: Remove dependency on mp_fun_table in dyn-compiler mode.
mpy-cross uses MICROPY_DYNAMIC_COMPILER and MICROPY_EMIT_NATIVE but does
not actually need to execute native functions, and does not need
mp_fun_table.  This commit makes it so mp_fun_table and all its entries are
not built when MICROPY_DYNAMIC_COMPILER is enabled, significantly reducing
the size of the mpy-cross executable and allowing it to be built on more
machines/OS's.
2019-05-29 21:17:29 +10:00
Damien George
bff4e13009 py/nativeglue: Make private glue funs all static, remove commented code. 2019-05-29 21:14:24 +10:00
Damien George
5ea38e4d74 py/native: Improve support for bool type in viper functions.
Variables with type bool now act more like an int, and there is proper
casting to/from Python objects.
2019-05-03 23:18:30 +10:00
Damien George
0e4c24ec08 py/nativeglue: Rename native convert funs to match other native helpers. 2019-03-14 12:22:25 +11:00
Damien George
3b973a5658 py: Move mp_native_type_from_qstr() from emitnative.c to nativeglue.c. 2019-03-14 12:22:25 +11:00
Damien George
de71035e02 py/emitnative: Put None/False/True in global native const table.
So these constant objects can be loaded by dereferencing the REG_FUN_TABLE
pointer instead of loading immediate values.  This reduces the size of
generated native code (when such constants are used), and means that
pointers to these constants are no longer stored in the assembly code.
2018-10-15 00:20:49 +11:00
Damien George
cc2bd63c57 py/emitnative: Implement yield and yield-from in native emitter.
This commit adds first class support for yield and yield-from in the native
emitter, including send and throw support, and yields enclosed in exception
handlers (which requires pulling down the NLR stack before yielding, then
rebuilding it when resuming).

This has been fully tested and is working on unix x86 and x86-64, and
stm32.  Also basic tests have been done with the esp8266 port.  Performance
of existing native code is unchanged.
2018-10-01 13:31:11 +10:00
Damien George
43f1848bfa py: Make viper functions have the same entry signature as native.
This commit makes viper functions have the same signature as native
functions, at the level of the emitter/assembler.  This means that viper
functions can now be wrapped in the same uPy object as native functions.

Viper functions are now responsible for parsing their arguments (before it
was done by the runtime), and this makes calling them more efficient (in
most cases) because the viper entry code can be custom generated to suit
the signature of the function.

This change also opens the way forward for viper functions to take
arbitrary numbers of arguments, and for them to handle globals correctly,
among other things.
2018-09-15 22:39:27 +10:00
Damien George
4f3d9429b5 py: Fix native functions so they run with their correct globals context.
Prior to this commit a function compiled with the native decorator
@micropython.native would not work correctly when accessing global
variables, because the globals dict was not being set upon function entry.

This commit fixes this problem by, upon function entry, setting as the
current globals dict the globals dict context the function was defined
within, as per normal Python semantics, and as bytecode does.  Upon
function exit the original globals dict is restored.

In order to restore the globals dict when an exception is raised the native
function must guard its internals with an nlr_push/nlr_pop pair.  Because
this push/pop is relatively expensive, in both C stack usage for the
nlr_buf_t and CPU execution time, the implementation here optimises things
as much as possible.  First, the compiler keeps track of whether a function
even needs to access global variables.  Using this information the native
emitter then generates three different kinds of code:

1. no globals used, no exception handlers: no nlr handling code and no
   setting of the globals dict.

2. globals used, no exception handlers: an nlr_buf_t is allocated on the
   C stack but it is not used if the globals dict is unchanged, saving
   execution time because nlr_push/nlr_pop don't need to run.

3. function has exception handlers, may use globals: an nlr_buf_t is
   allocated and nlr_push/nlr_pop are always called.

In the end, native functions that don't access globals and don't have
exception handlers will run more efficiently than those that do.

Fixes issue #1573.
2018-09-13 22:47:20 +10:00
Damien George
436e0d4c54 py/emit: Merge build set/slice into existing build emit function.
Reduces code size by:

   bare-arm:    +0
minimal x86:    +0
   unix x64:  -368
unix nanbox:  -248
      stm32:  -128
     cc3200:   -48
    esp8266:  -184
      esp32:   -40
2018-05-23 00:23:36 +10:00
Damien George
a3afa8cfc4 py/emitnative: Implement floor-division and modulo for viper emitter. 2017-10-11 18:54:34 +11:00
Damien George
a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Stefan Naumann
ace9fb5405 py: Add verbose debug compile-time flag MICROPY_DEBUG_VERBOSE.
It enables all the DEBUG_printf outputs in the py/ source code.
2017-08-15 11:53:36 +10:00
Alexander Steffen
55f33240f3 all: Use the name MicroPython consistently in comments
There were several different spellings of MicroPython present in comments,
when there should be only one.
2017-07-31 18:35:40 +10:00
Damien George
dd11af209d py: Add LOAD_SUPER_METHOD bytecode to allow heap-free super meth calls.
This patch allows the following code to run without allocating on the heap:

    super().foo(...)

Before this patch such a call would allocate a super object on the heap and
then load the foo method and call it right away.  The super object is only
needed to perform the lookup of the method and not needed after that.  This
patch makes an optimisation to allocate the super object on the C stack and
discard it right after use.

Changes in code size due to this patch are:

   bare-arm: +128
    minimal: +232
   unix x64: +416
unix nanbox: +364
     stmhal: +184
    esp8266: +340
     cc3200: +128
2017-04-22 23:39:20 +10:00
Damien George
088740ecc4 py: Optimise storage of iterator so it takes only 4 slots on Py stack. 2017-02-16 18:38:06 +11:00
Damien George
4e3bac2e42 py/runtime: Convert mp_uint_t to size_t where appropriate. 2017-02-16 16:51:13 +11:00
Damien George
ad297a1950 py: Allow inline-assembler emitter to be generic.
This patch refactors some code so that it is easier to integrate new
inline assemblers for different architectures other than ARM Thumb.
2016-12-09 17:06:21 +11:00
Damien George
3e02b1d19a py/viper: Allow casting of Python integers to viper pointers.
This allows you to pass a number (being an address) to a viper function
that expects a pointer, and also allows casting of integers to pointers
within viper functions.

This was actually the original behaviour, but it regressed due to native
type identifiers being promoted to 4 bits in width.
2016-02-09 13:29:20 +00:00
Damien George
5f3e005b67 py: Extend native type-sig to use 4 bits, so uint is separate to ptr.
Before this patch, the native types for uint and ptr/ptr8/ptr16/ptr32
all overlapped and it was possible to make a mistake in casting.  Now,
these types are all separate and any coding mistakes will be raised
as runtime errors.
2016-02-02 23:16:05 +00:00
Damien George
8f54c08691 py/inlineasm: Add ability to specify return type of asm_thumb funcs.
Supported return types are: object, bool, int, uint.

For example:

@micropython.asm_thumb
def foo(r0, r1) -> uint:
    add(r0, r0, r1)
2016-01-27 14:27:10 +00:00
Damien George
dd0a0f79d7 py/viper: Truncate viper integer args so they can be up to 32-bit. 2016-01-07 16:48:20 +00:00
Paul Sokolovsky
1b586f3a73 py: Rename MP_BOOL() to mp_obj_new_bool() for consistency in naming. 2015-10-11 15:18:15 +03:00
Damien George
59fba2d6ea py: Remove mp_load_const_bytes and instead load precreated bytes object.
Previous to this patch each time a bytes object was referenced a new
instance (with the same data) was created.  With this patch a single
bytes object is created in the compiler and is loaded directly at execute
time as a true constant (similar to loading bignum and float objects).
This saves on allocating RAM and means that bytes objects can now be
used when the memory manager is locked (eg in interrupts).

The MP_BC_LOAD_CONST_BYTES bytecode was removed as part of this.

Generated bytecode is slightly larger due to storing a pointer to the
bytes object instead of the qstr identifier.

Code size is reduced by about 60 bytes on Thumb2 architectures.
2015-06-25 14:42:13 +00:00
Damien George
ed570e4b2a py: Remove mp_load_const_str and replace uses with inlined version. 2015-06-25 13:58:41 +00:00
Damien George
9988618e0e py: Implement full func arg passing for native emitter.
This patch gets full function argument passing working with native
emitter.  Includes named args, keyword args, default args, var args
and var keyword args.  Fully Python compliant.

It reuses the bytecode mp_setup_code_state function to do all the hard
work.  This function is slightly adjusted to accommodate native calls,
and the native emitter is forced a bit to emit similar prelude and
code-info as bytecode.
2015-04-07 22:43:28 +01:00
Damien George
78772ada0d py: Implement calling functions with *args in native emitter. 2015-04-06 22:48:21 +01:00
Damien George
4cd9ced8dc py: Implement closures in native code generator.
Currently supports only x64 and Thumb2 archs.
2015-04-03 15:05:53 +01:00
Damien George
7d414a1b52 py: Parse big-int/float/imag constants directly in parser.
Previous to this patch, a big-int, float or imag constant was interned
(made into a qstr) and then parsed at runtime to create an object each
time it was needed.  This is wasteful in RAM and not efficient.  Now,
these constants are parsed straight away in the parser and turned into
objects.  This allows constants with large numbers of digits (so
addresses issue #1103) and takes us a step closer to #722.
2015-02-08 01:57:40 +00:00
Damien George
b6e6b5277f py: Implement proper re-raising in native codegen's finally handler.
This allows an exception to propagate correctly through a finally
handler.
2015-01-21 17:00:01 +00:00
Damien George
51dfcb4bb7 py: Move to guarded includes, everywhere in py/ core.
Addresses issue #1022.
2015-01-01 20:32:09 +00:00
Damien George
e9dac3b4d0 py: Add casting to viper; add native mem stores to viper.
Viper can now do the following:

def store(p:ptr8, c:int):
    p[0] = c

This does a store of c to the memory pointed to by p using a machine
instructions inline in the code.
2014-09-29 22:10:41 +01:00
Damien George
e6ce10a3e7 py: Native emitter now supports delete name & global, and end finally. 2014-09-06 18:38:20 +01:00
Damien George
4abff7500f py: Change uint to mp_uint_t in runtime.h, stackctrl.h, binary.h.
Part of code cleanup, working towards resolving issue #50.
2014-08-30 14:59:21 +01:00
Damien George
110ba35980 py: Move native glue code from runtime.c to new file nativeglue.c.
This way, the native glue code is only compiled if native code is
enabled (which makes complete sense; thanks to Paul Sokolovsky for
the idea).

Should fix issue #834.
2014-08-28 23:37:02 +01:00