Commit Graph

22 Commits

Author SHA1 Message Date
Damien George
a0dae1dda2 stm32/flash: Remove FLASH_OPTR_DBANK condition in L4, H7 get_bank func.
This was added by mistake in 8f68e26f79 when
adding support for G4 MCUs, which does not using this get_bank() function.

FLASH_OPTR_DBANK is only defined on G4 and L4 MCUs, so on H7 this
FLASH_BANK_2 code was being wrongly excluded.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
Asensio Lorenzo Sempere
010012c7c3 stm32: Add support for G0 MCUs.
This commit adds support for the STM32G0 series of MCUs.

Signed-off-by: Asensio Lorenzo Sempere <asensio.aerospace@gmail.com>
2022-04-28 11:56:15 +10:00
Damien George
e0a0719416 stm32: Add initial support for STM32WL MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-04 09:43:43 +11:00
Herwin Grobben
8f68e26f79 stm32: Add support for G4 MCUs, and add NUCLEO_G474RE board defn.
This commit adds support for the STM32G4 series of MCUs, and a board
definition for NUCLEO_G474RE.  This board has the REPL on LPUART1 which is
connected to the on-board ST-link USB-UART.
2022-02-01 16:21:01 +11:00
Jan Staal
9e2423e730 stm32: Add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn.
This commit is based upon prior work of @dpgeorge and @koendv.

MCU support for the STM32H7A3 and B3 families MCUs:
- STM32H7A3xx
- STM32H7A3xxQ (SMPS)
- STM32H7B3xx
- STM32H7B3xxQ (SMPS)

Support has been added for the STM32H7B3I_DK board.

Signed-off-by: Jan Staal <info@janstaal.com>
2021-09-16 12:29:28 +10:00
Jim Mussared
119c88ef17 stm32/flash: Implement WB55 flash locking.
This is needed to moderate concurrent access to the internal flash, as
while an erase/write is in progress execution will stall on the wireless
core due to the bus being locked.

This implements Figure 10 from AN5289 Rev 3.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-16 17:08:30 +11:00
Andrew Leech
40006813c3 stm32/flash: Update flash_get_sector_info to return -1 on invalid addr.
So the caller can tell when an invalid address is used and can take
appropriate action.
2020-06-30 21:24:28 +10:00
Damien George
736daebfc8 stm32/flash: Add flash_is_valid_addr, and extend sectors for 2MB F7.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-22 14:18:15 +10:00
Damien George
afd47d58ac stm32/flash: Make flash C-API reusable, and funcs return an error code.
This commit makes the low-level flash C functions usable by code other than
flashbdev.c (eg by mboot).  Changes in this commit are:
- flash_erase() and flash_write() now return an errno error code, a
  negative value on error.
- flash_erase() now automatically locks the flash, as well as unlocking it.
- flash_write() now automatically unlocks the flash, as well as locking it.
- flashbdev.c is modified for the above changes.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-22 14:18:15 +10:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
badlyby
0da2f6f23a stm32/flashbdev: Support internal filesystem on STM32F722/23/32/33. 2019-07-25 16:31:12 +10:00
Damien George
59b7166d87 stm32: Add initial support for STM32WBxx MCUs.
This new series of MCUs is similar to the L4 series with an additional
Cortex-M0 coprocessor.  The firmware for the wireless stack must be managed
separately and MicroPython does not currently interface to it.  Supported
features so far include: RTC, UART, USB, internal flash filesystem.
2019-07-17 16:33:31 +10:00
Damien George
23d9c6a0fd stm32: Add initial support for STM32L0xx MCUs. 2019-07-05 17:24:59 +10:00
Damien George
a974f2dc6e stm32/flash: Fix bug computing page number for L432 page erase. 2019-05-02 14:53:26 +10:00
boochow
9d3372bded stm32: Add peripheral support for STM32L432.
The L432 does not have: GPIOD, TIM3, SPI2, ADC dual mode operation, 2-banks
flash.
2018-12-06 13:32:43 +11:00
Damien George
a1acbad27a stm32/flash: Increase H7 flash size to full 2MiB. 2018-05-30 09:54:51 +10:00
Damien George
ea7e747979 stm32: Add support for STM32F0 MCUs. 2018-05-28 21:49:49 +10:00
Damien George
4c0f664b1a stm32/flash: Remove unused src parameter from flash_erase(). 2018-05-02 13:11:56 +10:00
Damien George
e37b8ba5a5 stm32: Use STM32xx macros instead of MCU_SERIES_xx to select MCU type.
The CMSIS files for the STM32 range provide macros to distinguish between
the different MCU series: STM32F4, STM32F7, STM32H7, STM32L4, etc.  Prefer
to use these instead of custom ones.
2018-03-17 10:42:50 +11:00
iabdalkader
81f8f5f163 stm32/flash: Add flash support for H7 MCUs. 2018-03-09 15:09:49 +11:00
Damien George
ea05b400df stm32/flash: Use FLASH_TYPEPROGRAM_WORD to support newer HALs. 2018-02-23 16:30:47 +11:00
Damien George
01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00