Commit Graph

17 Commits

Author SHA1 Message Date
robert-hh
29e9573de7 esp32: Use always machine_pin_get_id for getting a Pin id.
This applies to all machine modules which have pins as arguments.  Since
machine_pin_get_id() calls pin_find(), these pin arguments may be at the
moment either integer objects or Pin objects.  That allows for instance to
write

    uart = UART(1, tx=Pin(4), rx=Pin(5))

instead of

    uart = UART(1, tx=4, rx=5)

which is consistent with other ports.  Since this handling is done at a
single place in the code, extending that scheme to accept strings for named
pins is easy.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-07-20 17:33:04 +10:00
Damien George
e4650125b8 esp32: Update port to support IDF v5.0.2.
This commit updates the esp32 port to work exclusively with ESP-IDF v5.
IDF v5 is needed for some of the newer ESP32 SoCs to work, and it also
cleans up a lot of the inconsistencies between existing SoCs (eg S2, S3,
and C3).

Support for IDF v4 is dropped because it's a lot of effort to maintain both
versions at the same time.

The following components have been verified to work on the various SoCs:

                ESP32     ESP32-S2  ESP32-S3  ESP32-C3
    build       pass      pass      pass      pass
    SPIRAM      pass      pass      pass      N/A
    REPL (UART) pass      pass      pass      pass
    REPL (USB)  N/A       pass      pass      N/A
    filesystem  pass      pass      pass      pass
    GPIO        pass      pass      pass      pass
    SPI         pass      pass      pass      pass
    I2C         pass      pass      pass      pass
    PWM         pass      pass      pass      pass
    ADC         pass      pass      pass      pass
    WiFi STA    pass      pass      pass      pass
    WiFi AP     pass      pass      pass      pass
    BLE         pass      N/A       pass      pass
    ETH         pass      --        --        --
    PPP         pass      pass      pass      --
    sockets     pass      pass      pass      pass
    SSL         pass      ENOMEM    pass      pass
    RMT         pass      pass      pass      pass
    NeoPixel    pass      pass      pass      pass
    I2S         pass      pass      pass      N/A
    ESPNow      pass      pass      pass      pass
    ULP-FSM     pass      pass      pass      N/A
    SDCard      pass      N/A       N/A       pass
    WDT         pass      pass      pass      pass

Signed-off-by: Damien George <damien@micropython.org>
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-23 15:34:22 +10:00
Jim Mussared
7979a4d267 ports: In machine_i2s.c, rename uasyncio to asyncio.
Mostly updates comments, but also renames the UASYNCIO enum value to
ASYNCIO.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-19 18:36:54 +10:00
Damien George
0ee877a207 esp32/machine_i2s: Add I2S finaliser which calls deinit().
So that the FreeRTOS resources can be freed, eg on soft reset.

Fixes issue #9366.

Signed-off-by: Damien George <damien@micropython.org>
2022-10-04 11:47:06 +11:00
Jim Mussared
94beeabd2e py/obj: Convert make_new into a mp_obj_type_t slot.
Instead of being an explicit field, it's now a slot like all the other
methods.

This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:15 +10:00
Jim Mussared
6da41b5900 py/obj: Merge getiter and iternext mp_obj_type_t slots.
The goal here is to remove a slot (making way to turn make_new into a slot)
as well as reduce code size by the ~40 references to mp_identity_getiter
and mp_stream_unbuffered_iter.

This introduces two new type flags:
- MP_TYPE_FLAG_ITER_IS_ITERNEXT: This means that the "iter" slot in the
  type is "iternext", and should use the identity getiter.
- MP_TYPE_FLAG_ITER_IS_CUSTOM: This means that the "iter" slot is a pointer
  to a mp_getiter_iternext_custom_t instance, which then defines both
  getiter and iternext.

And a third flag that is the OR of both, MP_TYPE_FLAG_ITER_IS_STREAM: This
means that the type should use the identity getiter, and
mp_stream_unbuffered_iter as iternext.

Finally, MP_TYPE_FLAG_ITER_IS_GETITER is defined as a no-op flag to give
the default case where "iter" is "getiter".

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:13 +10:00
Jim Mussared
9dce82776d all: Remove unnecessary locals_dict cast.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared
662b9761b3 all: Make all mp_obj_type_t defs use MP_DEFINE_CONST_OBJ_TYPE.
In preparation for upcoming rework of mp_obj_type_t layout.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
David Lechner
b63282c361 esp32: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all root pointers in the
esp32 port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
Jim Mussared
0e7bfc88c6 all: Use mp_obj_malloc everywhere it's applicable.
This replaces occurences of

    foo_t *foo = m_new_obj(foo_t);
    foo->base.type = &foo_type;

with

    foo_t *foo = mp_obj_malloc(foo_t, &foo_type);

Excludes any places where base is a sub-field or when new0/memset is used.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-03 22:28:14 +10:00
MikeTeachman
49d8ae3ecc esp32/machine_i2s: Add support for ESP-IDF 4.4.
- Add default values for I2S features added in ESP-IDF 4.4.
- Add workaround for bug introduced in ESP-IDF 4.4
  (https://github.com/espressif/esp-idf/issues/8121).
2022-01-06 13:10:38 +11:00
MikeTeachman
6d5296e65e stm32,esp32: In machine_i2s, make object reference arrays root pointers.
This change eliminates the risk of the IRQ callback accessing invalid data.
Discussed here:
https://github.com/micropython/micropython/pull/7183#discussion_r660209875

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-13 12:22:42 +11:00
MikeTeachman
0be3b91f11 stm32,esp32: In machine_i2s, send null samples in underflow situations.
Eliminate noise data from being sent to the I2S peripheral when the
transmitted sample stream is stopped.

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-12 16:50:15 +11:00
Damien George
54d33b266c esp32: Add support for ESP32-S3 SoCs.
Thanks to Seon Rozenblum aka @UnexpectedMaker for the work.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-16 22:58:47 +10:00
Damien George
59dbbe9be7 esp32: Fix use of mp_int_t, size_t and uintptr_t.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 23:58:16 +10:00
Damien George
0fc0ccabec esp32/machine_i2s: Add MICROPY_PY_MACHINE_I2S option, enable by default.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 12:31:13 +10:00
Mike Teachman
8a5bfe44a5 esp32,stm32: Add new machine.I2S class for I2S protocol support.
This commit adds I2S protocol support for the esp32 and stm32 ports, via
a new machine.I2S class.  It builds on the stm32 work of blmorris, #1361.

Features include:
- a consistent I2S API across the esp32 and stm32 ports
- I2S configurations supported:
  - master transmit and master receive
  - 16-bit and 32-bit sample sizes
  - mono and stereo formats
  - sampling frequency
  - 3 modes of operation:
    - blocking
    - non-blocking with callback
    - uasyncio
  - internal ring buffer size can be tuned
- documentation for Pyboards and esp32-based boards
- tested on the following development boards:
  - Pyboard D SF2W
  - Pyboard V1.1
  - ESP32 with SPIRAM
  - ESP32

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-07-05 23:42:25 +10:00