Commit Graph

7679 Commits

Author SHA1 Message Date
Damien George
5010d1958f py/lexer: Simplify and reduce code size for operator tokenising.
By removing the 'E' code from the operator token encoding mini-language the
tokenising can be simplified.  The 'E' code was only used for the !=
operator which is now handled as a special case; the optimisations for the
general case more than make up for the addition of this single, special
case.  Furthermore, the . and ... operators can be handled in the same way
as != which reduces the code size a little further.

This simplification also removes a "goto".

Changes in code size for this patch are (measured in bytes):

bare-arm:       -48
minimal x86:    -64
unix x86-64:   -112
unix nanbox:    -64
stmhal:         -48
cc3200:         -48
esp8266:        -76
2017-03-29 10:56:52 +11:00
Paul Sokolovsky
e93c4ca181 zephyr/prj_base.conf: Enable TCP (and UDP explicitly). 2017-03-29 00:46:06 +03:00
Damien George
94c41bb06f py: Use mp_raise_TypeError/mp_raise_ValueError helpers where possible.
Saves 168 bytes on bare-arm.
2017-03-28 22:37:26 +11:00
Damien George
7b1804c582 stmhal/dma: Fix reinitialisation of DMA on F7 MCUs, following F4. 2017-03-28 12:59:02 +11:00
Damien George
e997bb6328 stmhal/hal: For F7 MCUs, expose DMA_CalcBaseAndBitshift function.
It's needed by the DMA driver to do an efficient reinitialisation.  This
patch follows what is done in the F4 HAL.
2017-03-28 12:56:18 +11:00
Damien George
ff927cb106 stmhal/spi: Clean and/or invalidate D-cache before SPI DMA transfers.
On MCUs with a cache (eg F7) this must be done or else the SPI data that is
transferred is incorrect.
2017-03-28 12:54:01 +11:00
Damien George
9a1b3da158 stmhal/board: Fix existing and add more pin defs for NUCLEO_F767ZI. 2017-03-28 12:42:23 +11:00
Damien George
8b36664e17 stmhal/boards: Fix alt-func config for PA5 of STM32F767. 2017-03-28 12:41:55 +11:00
Paul Sokolovsky
dbb2aea428 zephyr/prj_base.conf: Disable legacy kernel compatibility.
This keeps dependency on mdef, sysgen and other stuff which complicates
build integration.
2017-03-27 17:06:30 +03:00
Damien George
54507f78ee py/objmap: Convert mp_uint_t to size_t. 2017-03-27 12:19:24 +11:00
Damien George
f648e5442b esp8266/modesp: Remove long-obsolete and unused espconn bindings. 2017-03-27 12:05:18 +11:00
Damien George
734775524e tests/basics: Add test for super() when self is closed over. 2017-03-27 11:29:11 +11:00
Damien George
40c1272e55 py/compile: When compiling super(), handle closed-over self variable.
The self variable may be closed-over in the function, and in that case the
call to super() should load the contents of the closure cell using
LOAD_DEREF (before this patch it would just load the cell directly).
2017-03-27 11:27:08 +11:00
Damien George
a0973b09ce py/vm: Fix VM opcode tracing to print correct stack pointer.
Also const_table is now moved to the code_state->fun_bc structure.
2017-03-27 10:52:04 +11:00
Paul Sokolovsky
220df8544b zephyr/zephyr_getchar: Use native k_sem instead of legacy nano_sem. 2017-03-27 00:41:58 +03:00
Damien George
3f810daeb3 py/obj: Change mp_uint_t to size_t for mp_obj_get_array_fixed_n len arg. 2017-03-26 19:20:06 +11:00
Damien George
9c388f66cf esp8266/modesp: Use mp_obj_str_get_str instead of mp_obj_str_get_data. 2017-03-26 19:19:48 +11:00
Damien George
b568448306 extmod/modlwip: Use mp_obj_str_get_str instead of mp_obj_str_get_data. 2017-03-26 19:19:35 +11:00
Damien George
fb139a4ba6 README: Change Travis & Coveralls badges to not use link references.
Link references don't seem to work anymore.
2017-03-26 17:03:54 +11:00
Paul Sokolovsky
99866a00a0 py/nlrx86: Better check for Zephyr (requires 1.7). 2017-03-26 00:33:23 +03:00
Paul Sokolovsky
fa17eabce9 README: Describe extmod/ dir. 2017-03-25 17:12:24 +03:00
Paul Sokolovsky
c16d1c07ca README: Add link to docs.micropython.org. 2017-03-25 17:07:57 +03:00
Damien George
29424304d9 unix: Use mp_obj_str_get_str instead of mp_obj_str_get_data. 2017-03-25 19:54:07 +11:00
Damien George
ab5689bc9d py/objarray: Use mp_obj_str_get_str instead of mp_obj_str_get_data. 2017-03-25 19:53:31 +11:00
Damien George
64a4f11b2d py: Remove MP_STATE_CTX, use MP_STATE_THREAD instead (it's an alias).
MP_STATE_CTX was recently aliased to MP_STATE_THREAD and can now be
removed.
2017-03-24 18:43:28 +11:00
Damien George
707f16b05c py: Use mp_locals/mp_globals accessor funcs instead of MP_STATE_CTX.
To improve maintainability of the code.
2017-03-24 18:41:11 +11:00
Damien George
f4ee1ba9b4 py/objnamedtuple: Use size_t where appropriate, instead of mp_uint_t. 2017-03-24 17:25:25 +11:00
Damien George
d1b93ced78 py/objtype: Use size_t where appropriate, instead of mp_uint_t or uint. 2017-03-24 16:58:13 +11:00
Damien George
bfb48c1620 tests/float: Add tests for round() of inf, nan and large number. 2017-03-24 11:00:45 +11:00
Damien George
c236ebfea7 py/modbuiltins: Allow round() to return a big int if necessary.
Previous to this patch, if the result of the round function overflowed a
small int, or was inf or nan, then a garbage value was returned.  With
this patch the correct big-int is returned if necessary and exceptions are
raised for inf or nan.
2017-03-24 11:00:45 +11:00
Damien George
125eae1ba3 py/modbuiltins: For round() builtin use nearbyint instead of round.
The C nearbyint function has exactly the semantics that Python's round()
requires, whereas C's round() requires extra steps to handle rounding of
numbers half way between integers.  So using nearbyint reduces code size
and potentially eliminates any source of errors in the handling of half-way
numbers.

Also, bare-metal implementations of nearbyint can be more efficient than
round, so further code size is saved (and efficiency improved).

nearbyint is provided in the C99 standard so it should be available on all
supported platforms.
2017-03-24 11:00:45 +11:00
Damien George
fb161aa45a lib/libm: Add implementation of nearbyintf, from musl-1.1.16. 2017-03-24 10:38:11 +11:00
Damien George
bacb52aa2d tests/float: Add tests for math funcs that return ints.
One should test bigint, inf and nan to make sure all cases are covered.
2017-03-23 23:54:10 +11:00
Damien George
c073519ec8 py/objint: Handle special case of -0 when classifying fp as int.
Otherwise -0.0 is classified as a bigint, which for builds without bigints
will lead unexpectedly to an overflow.
2017-03-23 23:51:35 +11:00
Damien George
febeff4af4 py/modmath: Allow trunc/ceil/floor to return a big int if necessary.
Previous to this patch, if the result of the trunc/ceil/floor functions
overflowed a small int, or was inf or nan, then a garbage value was
returned.  With this patch the correct big-int is returned if necessary,
and exceptions are raised for inf or nan.
2017-03-23 22:57:08 +11:00
Damien George
f64a3e296e py/lexer: Remove obsolete comment, since lexer can now raise exceptions. 2017-03-23 16:40:24 +11:00
Damien George
60656eaea4 py: Define and use MP_OBJ_ITER_BUF_NSLOTS to get size of stack iter buf.
It improves readability of code and reduces the chance to make a mistake.

This patch also fixes a bug with nan-boxing builds by rounding up the
calculation of the new NSLOTS variable, giving the correct number of slots
(being 4) even if mp_obj_t is larger than the native machine size.
2017-03-23 16:36:08 +11:00
Damien George
507119f4d8 py/sequence: Convert mp_uint_t to size_t where appropriate. 2017-03-23 16:23:20 +11:00
Damien George
c88cfe165b py: Use size_t as len argument and return type of mp_get_index.
These values are used to compute memory addresses and so size_t is the
more appropriate type to use.
2017-03-23 16:17:40 +11:00
stijn
3f3df43501 msvc: Remove directory with generated files when cleaning.
This assures after cleaning all build artefacts (qstr related files,
generated version header) have been removed.
2017-03-23 15:49:57 +11:00
stijn
c61131380d windows: Make msvc project file support any version from VS2013 to VS2017
Instead of having the PlatformToolset property hardcoded to a specific
version just set it to the value of DefaultPlatformToolset: this gets
defined according to the commandline environment in which the build was
started.
Instead of just supporting VS2015 the project can now be built by any
version from VS2013 to VS2017 and normally future versions as well, without
quirks like VS asking whether you want to upgrade the project to the latest
version (as was the case when opening the project in VS2017) or not being
able to build at all (as was the case when opening the project in VS2013).

Also adjust the .gitignore file to ignore any artefacts from VS2017.
2017-03-23 15:44:27 +11:00
Damien George
92cd000842 minimal/Makefile: Change C standard from gnu99 to c99. 2017-03-23 15:41:38 +11:00
Damien George
4afa782fb4 bare-arm/Makefile: Change C standard from gnu99 to c99. 2017-03-23 15:41:04 +11:00
Krzysztof Blazewicz
75589272ef all/Makefile: Remove -ansi from GCC flags, its ignored anyway.
The -ansi flag is used for C dialect selection and it is equivalent to -std=c90.
Because it goes right before -std=gnu99 it is ignored as for conflicting flags
GCC always uses the last one.
2017-03-23 15:32:12 +11:00
Paul Sokolovsky
4a4bb84e92 tests/heapalloc_str: Test no-replacement case for str.replace(). 2017-03-22 22:17:52 +03:00
Damien George
58f23def55 py/bc: Provide better error message for an unexpected keyword argument.
Now, passing a keyword argument that is not expected will correctly report
that fact.  If normal or detailed error messages are enabled then the name
of the unexpected argument will be reported.

This patch decreases the code size of bare-arm and stmhal by 12 bytes, and
cc3200 by 8 bytes.  Other ports (minimal, unix, esp8266) remain the same in
code size.  For terse error message configuration this is because the new
message is shorter than the old one.  For normal (and detailed) error
message configuration this is because the new error message already exists
in py/objnamedtuple.c so there's no extra space in ROM needed for the
string.
2017-03-22 13:40:27 +11:00
Damien George
1110c8873c cc3200/mods/modutime: Use generic sleep_ms and sleep_us implementations. 2017-03-22 12:57:51 +11:00
Damien George
3509e2d307 stmhal/systick: Make mp_hal_delay_ms release the GIL when sleeping. 2017-03-22 12:54:43 +11:00
Damien George
2e3fc77809 extmod/utime_mphal: Don't exit/enter the GIL in generic sleep functions.
GIL behaviour should be handled by the port.  And ports probably want to
define sleep_us so that it doesn't release the GIL, to improve timing
accuracy.
2017-03-22 12:49:21 +11:00
Damien George
96c35d0ac4 stmhal/pybthread: Allow interrupts to work during lock/unlock of mutex.
When locking/unlocking a mutex we only need to protect against a thread
switch, not general interrupts.
2017-03-22 12:44:04 +11:00