Commit Graph

361 Commits

Author SHA1 Message Date
Damien George
120368ba1a stm32/boards: Enable LFS2 on PYBv1.x and PYBD boards. 2019-11-26 00:08:57 +11:00
Mike Causer
258b147830 stm32/boards/stm32f405_af.csv: Fix typo in ETH_RMII_REF_CLK on PA1. 2019-11-11 12:02:14 +11:00
Damien George
799b6d1e0c extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the
MICROPY_VFS_FAT config to the Makefile level to replace it.  It also moves
the include of the oofatfs source files in the build from each port to a
central place in extmod/extmod.mk.

For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1
at the level of the Makefile.  This will include the relevant oofatfs files
in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
2019-11-11 11:37:38 +11:00
Damien George
32eae53fbc stm32/boards: Enable support for bluetooth on WB55 boards. 2019-11-01 14:58:24 +11:00
Damien George
6a64b280d0 stm32: Add support for RF coprocessor on WB55 MCUs.
This requires a BLE wireless stack firmware to be already programmed in the
secure flash area of the device.
2019-11-01 14:52:17 +11:00
Jim Mussared
8ba963cfa3 tools/makemanifest.py: Eval relative paths w.r.t. current manifest file.
When loading a manifest file, e.g. by include(), it will chdir first to the
directory of that manifest.  This means that all file operations within a
manifest are relative to that manifest's location.

As a consequence of this, additional environment variables are needed to
find absolute paths, so the following are added: $(MPY_LIB_DIR),
$(PORT_DIR), $(BOARD_DIR).  And rename $(MPY) to $(MPY_DIR) to be
consistent.

Existing manifests are updated to match.
2019-10-21 23:01:41 +11:00
Frederic.Pierson
925f244ab3 stm32/boards: Add NADHAT_PYB405 board. 2019-10-18 11:41:22 +11:00
Damien George
287800d6e1 stm32: Convert to use FROZEN_MANIFEST to specify frozen code.
All symlinks are removed, frozen files are now referenced via
boards/manifest.py.
2019-10-15 21:36:24 +11:00
ladyada
06ae818f93 stm32/boards: Add new board ADAFRUIT_F405_EXPRESS. 2019-10-11 11:50:36 +11:00
Damien George
4a6974bea5 stm32/boards/PYBD_SF2: Put nimble library in external QSPI XIP flash.
The BLE stack is not performance critical, so put it in external
memory-mapped flash to save internal flash for other things (like frozen
bytecode).
2019-10-05 23:51:33 +10:00
Damien George
26e90a0514 stm32/boards: Enable MICROPY_HW_RTC_USE_LSE on L4 boards.
The previous commit changed the default configuration on L4 MCUs to use
LSI, so configure these boards to use LSE again.
2019-10-04 16:10:13 +10:00
Jim Mussared
fafa9d35dd stm32/boards/PYBD: Enable BLE for Pyboard D. 2019-10-01 09:51:02 +10:00
Chris Mason
eb12fa3862 stm32/powerctrlboot: Add support for HSI at 8MHz on F0 MCUs.
For use with F0 MCUs that don't have HSI48.  Select the clock source
explicitly in mpconfigboard.h.

On the NUCLEO_F091RC board use HSE bypass when HSE is chosen because the
NUCLEO clock source is STLINK not a crystal.
2019-09-26 17:34:04 +10:00
iabdalkader
4f78ba3cf4 stm32/boards/NUCLEO_H743ZI: Enable FDCAN on this board. 2019-09-23 17:00:54 +10:00
cristian
cfec054073 stm32/board/NUCLEO_F746ZG: Enable Ethernet periph, lwip and ussl. 2019-09-11 11:20:58 +10:00
Jim Mussared
c8c37ca407 stm32/boards/STM32F769DISC: Fix number of SDRAM row bits.
According to the schematic, the SDRAM part on this board is a
MT48LC4M32B2B5-6A, with "Row addressing 4K A[11:0]" (per datasheet).  This
commit updates mpconfigboard.h from 13 to 12 to match.
2019-09-10 23:13:52 +10:00
Christopher Wilson
f9d142523c stm32/boards/MIKROE_CLICKER2_STM32: Add MikroElektronika Clicker2 board.
- STM32F407VGT6 (1MB of Flash, 192+4 Kbytes of SRAM)
- 5V (via USB) or Li-Polymer Battery (3.7V) power input
- 2 x LEDs
- 2 x user switches
- 2 x mikroBUS sockets
- 2 x 1x26 mikromedia-compatible headers (52 pins)

https://www.mikroe.com/clicker-2-stm32f4
2019-09-10 13:57:01 +10:00
Damien George
2b07f56c2b stm32/boards/NUCLEO_L073RZ: Fix typo in MCU name. 2019-09-10 11:53:00 +10:00
Damien George
bd2e46e0a5 stm32/boards/stm32wb55_af.csv: Fix ADC pin-channel function mapping. 2019-09-06 17:56:34 +10:00
Damien George
5789558d60 stm32/boards/PYBD_SF2: Exclude certain things when building mboot. 2019-08-28 12:37:13 +10:00
Damien George
b1e04848ef stm32/mphalport: Put PYBD specific MAC code in board specific file. 2019-08-28 12:37:13 +10:00
Damien George
8485b72d0d stm32/boards/NUCLEO_L432KC: Add config for USB VCP support. 2019-08-15 12:46:34 +10:00
Damien George
ad0b7cb017 stm32/boards/xxx_WB55: Enable USB HID now that it works on WB MCUs. 2019-07-25 17:49:53 +10:00
badlyby
3b258ef213 stm32/boards/NUCLEO_F722ZE: Add definition files for new board. 2019-07-25 16:31:36 +10:00
badlyby
09267bb147 stm32/boards/stm32f722.ld: Provide memory regions for internal FS. 2019-07-25 16:31:36 +10:00
Damien George
0c12adca46 stm32/boards/USBDONGLE_WB55: Add definition files for new board. 2019-07-17 17:00:34 +10:00
Damien George
d2a8fb747f stm32/boards/NUCLEO_WB55: Add definition files for new board. 2019-07-17 17:00:34 +10:00
Damien George
9849567a06 stm32/boards: Add MCU support files for STM32WB55. 2019-07-17 16:50:42 +10:00
Damien George
02b2ad4fbd stm32/boards/STM32F769DISC: Fix length of FLASH_APP section.
Fixes issue #4924.
2019-07-17 16:19:50 +10:00
Damien George
baea43bba7 stm32/boards/B_L072Z_LRWAN1: Enable USB VCP support. 2019-07-16 14:50:44 +10:00
Damien George
a17b901a9e stm32/boards/B_L072Z_LRWAN1: Add definition files for new board. 2019-07-09 12:54:09 +10:00
Damien George
d43dd886a5 stm32/boards/NUCLEO_F413ZH: Remove STARTUP_FILE, it's defined globally.
The Makefile now defines this variable to the correct value (but it can
still be overridden by a board if necessary).
2019-07-09 11:32:12 +10:00
Chris Mason
c24d81119c stm32/boards/NUCLEO_L452RE: Add definition files for new board. 2019-07-08 16:50:45 +10:00
Chris Mason
64181b5f76 stm32: Add support for STM32L452 MCUs. 2019-07-08 16:50:19 +10:00
Damien George
eea61a09c4 stm32/boards/NUCLEO_F446RE: Enable DAC. 2019-07-08 16:08:40 +10:00
Damien George
7c2e83324b stm32/boards/NUCLEO_L073RZ: Add definition files for new board. 2019-07-05 17:28:54 +10:00
Damien George
9c096c190c stm32/boards: Add MCU support files for STM32L072. 2019-07-05 17:26:03 +10:00
Damien George
c1a8c7fc09 stm32/boards/PYBD_SFx: Automatically turn on EN_3V3 when powering SD/MMC 2019-07-04 11:11:11 +10:00
Damien George
1cd2bc066d stm32/boards/PYBD_SFx: Configure EN_3V3 pin as output on boot.
But leave it turned off, the application must turn it on if/when needed.
2019-07-04 11:03:10 +10:00
Damien George
7cf8285ac8 stm32/boards: Remove startup_stm32*.s files now they are in stm32lib. 2019-07-03 23:44:17 +10:00
Damien George
73e8b7e0e4 stm32: Update components to work with new H7xx HAL. 2019-07-03 23:40:49 +10:00
Damien George
3581deec81 stm32/boards/PYBD_SF2: Put mbedtls library code in external QSPI flash.
mbedtls is large and self contained so is a good candidate to be in
external XIP flash, to keep enough spare ROM in internal flash.
2019-07-03 16:50:02 +10:00
Damien George
d821a27b58 stm32/boards/PYBD_SFx: Put SPI flash to sleep during sleep modes. 2019-07-03 01:27:33 +10:00
Chris Mason
3786592097 stm32/boards: Optimise flash and RAM allocation for L4 boards.
Optimisations are:
- Remove FLASH_ISR section since devices with a small flash sector erase
  size don't need special FLASH_ISR handling.  This reduces flash image by
  approx 1.5k.
- Make SRAM2 contiguous with SRAM1 where possible.
- Simplify configuration of 2k RAM buffer used for flash filesystem.

RAM changes with this commit:
- L432: stack   6k -> 10k,  bss + heap   42k ->  52k
- L476: stack  16k -> 30k,  bss + heap   80k ->  96k
- L496: stack 206k -> 16k,  bss + heap  112k -> 302k
2019-07-01 16:57:20 +10:00
Damien George
009b1f6559 stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
This eliminates a lot of duplicated code in these header files.
2019-06-25 14:18:24 +10:00
Damien George
f96f53cd97 stm32/boards: Add stm32??xx_hal_conf_base.h files with common settings.
These are intended to be used by all boards, to reduce the size of a
board's configuration.
2019-06-25 14:18:24 +10:00
Damien George
89ebb3325b stm32/boards/pllvalues.py: Support HSx_VALUE defined without uint32_t. 2019-06-25 14:18:24 +10:00
Damien George
04c7cdb668 stm32: Enter bootloader via a system reset.
Entering a bootloader (ST system bootloader, or custom mboot) from software
by directly branching to it is not reliable, and the reliability of it
working can depend on the peripherals that were enabled by the application
code.  It's also not possible to branch to a bootloader if the WDT is
enabled (unless the bootloader has specific provisions to feed the WDT).

This patch changes the way a bootloader is entered from software by first
doing a complete system reset, then branching to the desired bootloader
early on in the start-up process.  The top two words of RAM (of the stack)
are reserved to store flags indicating that the bootloader should be
entered after a reset.
2019-06-25 14:15:49 +10:00
Damien George
5da60ff9cb stm32/boards: Enable ussl module via mbedtls for boards with network. 2019-06-24 17:48:28 +10:00
Chris Mason
14cf91f704 stm32: In link script, define start of stack separately from heap end.
Previously the end of the heap was the start (lowest address) of the stack.
With the changes in this commit these addresses are now independent,
allowing a board to place the heap and stack in separate locations.
2019-06-14 15:29:24 +10:00
Damien George
fd839221fd stm32/boards/PYBD_SFx: Enable ussl module using mbedTLS. 2019-06-05 15:38:01 +10:00
Damien George
62fe47aa3a stm32/boards/PYBD_SFx: Enable CYW43 WLAN driver. 2019-06-03 17:14:34 +10:00
Damien George
8f55c74533 stm32/boards: Add board definition files for PYBD -SF2, -SF3, -SF6.
These are core configurations providing PYBv1.x-level features.
2019-05-31 22:44:25 +10:00
Damien George
34cae24e30 stm32/boards/pllvalues.py: Search nested headers for HSx_VALUE defines. 2019-05-31 21:44:53 +10:00
Damien George
f8274d5e7d stm32/boards/make-pins.py: Allow pins.csv to skip or hide board-pin name
If the board-pin name is left empty then only the cpu-pin name is used, eg
",PA0".  If the board-pin name starts with a hyphen then it's available as
a C definition but not in the firmware, eg "-X1,PA0".
2019-05-31 21:41:30 +10:00
iabdalkader
746fcea7f8 stm32/boards/NUCLEO_H743ZI: Enable SPI3 on this board. 2019-05-15 16:08:10 +10:00
Chris Mason
2a791170ce stm32/boards: Add NUCLEO_F413ZH board configuration.
The alternate function pin allocations are different to other NUCLEO-144
boards.  This is because the STM32F413 has a very high peripheral count:
10x UART, 5x SPI, 3x I2C, 3x CAN.  The pinout was chosen to expose all
these devices on separate pins except CAN3 which shares a pin with UART1
and SPI1 which shares pins with DAC.
2019-05-02 16:33:30 +10:00
Chris Mason
1b956ec817 stm32: Add support for F413 MCUs.
Includes:
- Support for CAN3.
- Support for UART9 and UART10.
- stm32f413xg.ld and stm32f413xh.ld linker scripts.
- stm32f413_af.csv alternate function mapping.
- startup_stm32f413xx.s because F413 has different interrupt vector table.
- Memory configuration with: 240K filesystem, 240K heap, 16K stack.
2019-05-02 16:26:53 +10:00
Damien George
3fbf32b947 stm32/powerctrl: Support changing frequency when HSI is clock source.
This patch makes pllvalues.py generate two tables: one for when HSI is used
and one for when HSE is used.  The correct table is then selected at
compile time via the existing MICROPY_HW_CLK_USE_HSI.
2019-05-02 13:00:00 +10:00
Damien George
11657f2f20 stm32/system_stm32f0: Add support for using HSE and PLL as SYSCLK.
To configure the SYSCLK on an F0 enable one of:

    MICROPY_HW_CLK_USE_HSI48
    MICROPY_HW_CLK_USE_HSE
    MICROPY_HW_CLK_USE_BYPASS
2019-04-18 16:00:45 +10:00
Damien George
358364b45e stm32/boards/NUCLEO_L432KC: Disable complex nos and default frozen mods.
To save space, since this board only hase 256k of flash.
2019-04-09 11:23:08 +10:00
Damien George
4831e38c7e stm32/boards/NUCLEO_H743ZI: Add config options to support mboot. 2019-04-08 14:34:37 +10:00
Damien George
9670b26526 stm32: Rename MICROPY_HW_HAS_SDCARD to MICROPY_HW_ENABLE_SDCARD.
For consistency with the majority of other MICROPY_HW_ENABLE_xxx macros.
2019-04-01 15:21:26 +11:00
Boris Vinogradov
1a608ce1e8 stm32/boards/STM32L476DISC: Enable servo support on STM32L476DISC board. 2019-03-28 15:35:58 +11:00
Francisco J. Manno
f938e70c69 stm32: Add compile-time option to use HSI as clock source.
To use HSI instead of HSE define MICROPY_HW_CLK_USE_HSI as 1 in the board
configuration file.  The default is to use HSE.

HSI has been made the default for the NUCLEO_F401RE board to serve as an
example, and because early revisions of this board need a hardware
modification to get HSE working.
2019-03-05 15:49:08 +11:00
Damien George
e61862d063 stm32/boards: Update to use new build config for lwip component. 2019-03-04 23:34:03 +11:00
Damien George
84479569de stm32/boards/STM32F769DISC: Use external QSPI flash to store some code.
This demonstrates how to use external QSPI flash in XIP (execute in place)
mode.  The default configuration has all extmod/ code placed into external
QSPI flash, but other code can easily be put there by modifying the custom
f769_qspi.ld script.
2019-03-04 22:40:15 +11:00
Damien George
823b31e528 stm32/boards/NUCLEO_F429ZI: Enable lwIP and Ethernet peripheral. 2019-02-26 23:32:19 +11:00
Damien George
ed0a530614 stm32/boards/STM32F769DISC: Enable lwIP and Ethernet peripheral. 2019-02-26 23:32:19 +11:00
Damien George
b3513f54d3 stm32/boards/STM32F7DISC: Enable lwIP and Ethernet peripheral. 2019-02-26 23:32:19 +11:00
Damien George
8daec24168 stm32/boards/NUCLEO_F767ZI: Enable lwIP and Ethernet peripheral. 2019-02-26 23:32:19 +11:00
Damien George
75a35448e1 stm32/boards/NUCLEO_F767ZI: Fix up comments about HCLK computation. 2019-02-26 22:44:27 +11:00
Damien George
c65e5c88b8 stm32/boards/stm32f429.ld: Increase uPy heap size by 64k for F429 MCU.
The F429 has 256k total RAM, with 64k already set aside for flash write
cache, so the uPy heap can be increased this much.
2019-02-18 13:18:59 +11:00
Damien George
7b2dc96251 stm32/boards/make-pins.py: Add cmdline options to support use by mboot. 2019-02-14 13:35:39 +11:00
Jolatomme
d1acca3c71 stm32/boards/NUCLEO_L476RG: Add support for RNG, DAC and CAN1.
PLLQ is changed to get CAN working, and I2C1 pins are changed to those
prescribed by the board.
2019-02-14 00:28:28 +11:00
Damien George
1669e049de stm32/boards/STM32F769DISC: Configure for use with mboot by default.
This is a good board to demonstrate the use of Mboot because it only has a
USB HS port exposed so the native ST DFU mode cannot be used.  With Mboot
this port can be used.
2019-02-07 16:28:01 +11:00
Damien George
be1b1835c3 stm32/boards/STM32F769DISC: Support the use of USB HS with external PHY. 2019-02-07 16:26:46 +11:00
Damien George
b367c425e4 stm32/boards/stm32h743_af.csv: Add ADC entries to pin capability table. 2019-02-06 13:34:53 +11:00
Damien George
02682d52ce stm32/boards/make-pins.py: Add basic support for STM32H7 ADC periphs. 2019-02-06 13:34:23 +11:00
Damien George
4bed17e786 stm32/boards/stm32f429_af.csv: Fix typos in UART defs Tx->TX and Rx->RX.
Fixes issue #4445.
2019-01-31 01:02:42 +11:00
Damien George
5146e79490 stm32/boards/NUCLEO_L432KC: Specify L4 OpenOCD config file for this MCU. 2018-12-13 13:45:16 +11:00
Damien George
59f409a787 stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img.
To support deplop-openocd on target boards that use TEXT0_ADDR only and
have their firmware in a single binary image.
2018-12-13 13:43:10 +11:00
boochow
69b7b8fa12 stm32/boards: Add NUCLEO_L432KC board configuration files. 2018-12-06 13:33:29 +11:00
boochow
1a8baad7ca stm32/boards: Add STM32L432KC chip configuration files.
The pin alternate function information is derived from ST's datasheet
https://www.st.com/resource/en/datasheet/stm32l432kc.pdf
In the datasheet, the line 2 of AF4 includes I2C2 but actually the chip
does not have I2C2 so it is removed.
2018-12-06 13:32:43 +11:00
Damien George
c040961e91 stm32/boards: Add configuration for putting mboot on PYBv1.x. 2018-12-04 23:48:18 +11:00
roland
10bddc5c28 stm32/boards/STM32F429DISC: Enable UART as secondary REPL.
The board(s) feature a VCOM through the ST-LINK, this feature is something
to keep around.
2018-12-01 17:30:48 +11:00
roland
30ed2b3cab stm32/system_stm32: Introduce configuration defines for PLL3 settings.
A board must be able to set the PLL3 values based on the HSE that it uses.
2018-11-01 13:25:47 +11:00
Damien George
d2c5496894 stm32/boards/stm32h743.ld: Fix total flash size, should be 2048k.
Fixes issue #4240.
2018-10-17 15:29:56 +11:00
Andrew Leech
338635ccc6 stm32/main: Add configuration macros for board to set heap start/end.
The macros are MICROPY_HEAP_START and MICROPY_HEAP_END, and if not defined
by a board then the default values will be used (maximum heap from SRAM as
defined by linker symbols).

As part of this commit the SDRAM initialisation is moved to much earlier in
main() to potentially make it available to other peripherals and avoid
re-initialisation on soft-reboot.  On boards with SDRAM enabled the heap
has been set to use that.
2018-10-05 17:30:18 +10:00
Damien George
4df1943948 stm32/boards/NUCLEO_F091RC: Enable USART3-8 with default pins. 2018-09-21 14:04:33 +10:00
Damien George
a5b583adfd stm32/boards/STM32F769DISC: Add optional support for external SDRAM. 2018-09-20 11:42:03 +10:00
Damien George
47550ef2cd stm32: For MCUs that have PLLSAI allow to set SYSCLK at 2MHz increments.
MCUs that have a PLLSAI can use it to generate a 48MHz clock for USB, SDIO
and RNG peripherals.  In such cases the SYSCLK is not restricted to values
that allow the system PLL to generate 48MHz, but can be any frequency.
This patch allows such configurability for F7 MCUs, allowing the SYSCLK to
be set in 2MHz increments via machine.freq().  PLLSAI will only be enabled
if needed, and consumes about 1mA extra.  This fine grained control of
frequency is useful to get accurate SPI baudrates, for example.
2018-09-11 16:42:57 +10:00
roland
67ee4e2401 stm32/boards/STM32L476DISC: Enable external RTC xtal to get RTC working. 2018-09-11 15:23:19 +10:00
forester3
02fbb0a455 stm32/boards/STM32F7DISC: Enable onboard SDRAM.
The default SYSCLK frequency is reduced to 192MHz because SDRAM requires it
to be 200MHz or less.
2018-08-14 16:04:10 +10:00
forester3
502c410214 stm32/boards/STM32F429DISC: Add burst len and autorefresh to SDRAM cfg.
To align with recent changes to sdram.c.
2018-08-14 16:03:13 +10:00
Andrew Leech
434975defa stm32/boards/STM32F429DISC: Enable onboard SDRAM. 2018-07-23 23:16:32 +10:00
Andrew Leech
4343c9330e stm32: Add method for statically configuring pin alternate function.
Works with pins declared normally in mpconfigboard.h, eg. (pin_XX), as well
as (pyb_pin_XX).

Provides new mp_hal_pin_config_alt_static(pin_obj, mode, pull, fn_type)
function declared in pin_static_af.h to allow configuring pin alternate
functions by name at compile time.
2018-07-20 14:03:21 +10:00
Peter D. Gray
a8736e5c36 stm32/flashbdev: Fix bug with L4 block cache, dereferencing block size.
The code was dereferencing 0x800 and loading a value from there, trying to
use a literal value (not address) defined in the linker script
(_ram_fs_cache_block_size) which was 0x800.
2018-07-19 12:15:34 +10:00
Damien George
a2ac7e4fc9 stm32/boards: Add .ld and af.csv files for STM32F722.
These files can also be used for F723, F732 and F733 MCUs.
2018-06-22 15:39:10 +10:00
Damien George
561ae9a91b stm32/boards/NUCLEO_F091RC: Fix TICK_INT_PRIORITY so it is highest prio.
Fixes issue #3880.
2018-06-20 12:24:18 +10:00
rolandvs
ca2b1d6b36 stm32/boards/NUCLEO_F091RC: Add Arduino-named pins and rename CPU pins.
To match pin labels on other NUCLEO 64 boards.
2018-06-18 13:06:27 +10:00
rolandvs
0d3de68669 stm32/boards/stm32f091_af.csv: Split labels that are multiple funcs. 2018-06-18 13:05:24 +10:00
Damien George
335d26b27d stm32/boards/STM32L476DISC: Update SPI flash config for cache change. 2018-06-14 16:52:56 +10:00
rolandvs
958fa74521 stm32/boards: Ensure USB OTG power is off for NUCLEO_F767ZI.
And update the GPIO init for NUCLEO_H743ZI to consistently use the mphal
functions.
2018-05-30 09:51:19 +10:00
rolandvs
50bc34d4a4 stm32/boards: Split combined alt-func labels and fix some other errors.
Pins with multiple alt-funcs for the same peripheral (eg USART_CTS_NSS)
need to be split into individual alt-funcs for make-pins.py to work
correctly.

This patch changes the following:
- Split `..._CTS_NSS` into `..._CTS/..._NSS`
- Split `..._RTS_DE` into `..._RTS/..._DE`
- Split `JTDO_SWO` into `JTDO/TRACESWO` for consistency
- Fixed `TRACECK` to `TRACECLK` for consistency
2018-05-29 21:37:49 +10:00
Damien George
e681372017 stm32/boards: Add NUCLEO_F091RC board configuration files. 2018-05-28 21:49:49 +10:00
Damien George
1163400039 stm32/boards: Add alt-func CSV list and linker script for STM32F091. 2018-05-28 21:49:49 +10:00
Damien George
4a7d157a5b stm32/boards: Add startup_stm32f0.s for STM32F0 MCUs.
Sourced from STM32Cube_FW_F0_V1.9.0.
2018-05-28 21:49:49 +10:00
Tobias Badertscher
769e37b646 stm32/boards: Add config files for new board, STM32L496GDISC. 2018-05-18 22:39:49 +10:00
Tobias Badertscher
4005c63571 stm32/boards: Add board ld and af.csv files for STM32L496 MCU. 2018-05-18 22:39:44 +10:00
Tobias Badertscher
708cdb6276 stm32: Add support for STM32L496 MCU. 2018-05-18 22:37:30 +10:00
Ryan Shaw
b9ff46f1ed stm32: Enable UART7/8 on F4 series that have these peripherals. 2018-05-16 11:55:07 +10:00
Damien George
68f4cba3d2 stm32/boards: Update pins.csv to include USB pins where needed. 2018-05-01 17:38:51 +10:00
iabdalkader
28c9824c51 stm32/boards/NUCLEO_H743ZI: Enable ADC peripheral. 2018-05-01 15:39:03 +10:00
Damien George
c0dd9be606 stm32/boards/NUCLEO_H743ZI: Use priority 0 for SysTick IRQ.
This follows how all other boards are configured.
2018-04-27 15:16:45 +10:00
iabdalkader
d870a4e835 stm32/boards/NUCLEO_H743ZI: Enable RNG for this board. 2018-04-23 16:43:16 +10:00
Damien George
a7ebac2eae stm32/can: Allow CAN pins to be configured per board.
This patch allows a given board to configure which pins are used for the
CAN peripherals, in a similar way to all the other bus peripherals (I2C,
UART, SPI).  To enable CAN on a board the mpconfigboard.h file should
define (for example):

    #define MICROPY_HW_CAN1_TX (pin_B9)
    #define MICROPY_HW_CAN1_RX (pin_B8)
    #define MICROPY_HW_CAN2_TX (pin_B13)
    #define MICROPY_HW_CAN2_RX (pin_B12)

And the board config file should no longer define MICROPY_HW_ENABLE_CAN.
2018-04-11 16:35:24 +10:00
Damien George
0041396f05 stm32/pin: In pin AF object, remove union of periph ptr types.
The individual union members (like SPI, I2C) are never used, only the
generic "reg" entry is.  And the union names can clash with macro
definitions in the HAL so better to remove them.
2018-04-11 16:14:58 +10:00
iabdalkader
e1e49adb86 stm32/boards/NUCLEO_H743ZI: Enable DAC peripheral. 2018-04-10 14:21:26 +10:00
Damien George
7e28212352 stm32/boards/STM32L476DISC: Update to not take the address of pin objs. 2018-03-28 16:29:55 +11:00
Damien George
2dca693c24 stm32: Change pin_X and pyb_pin_X identifiers to be pointers to objects.
Rather than pin objects themselves.  The actual object is now pin_X_obj and
defines are provided so that pin_X is &pin_X_obj.  This makes it so that
code that uses pin objects doesn't need to know if they are literals or
objects (that need pointers taken) or something else.  They are just
entities that can be passed to the map_hal_pin_xxx functions.  This mirrors
how the core handles constant objects (eg mp_const_none which is
&mp_const_none_obj) and allows for the possibility of different
implementations of the pin layer.

For example, prior to this patch there was the following:

    extern const pin_obj_t pin_A0;
    #define pyb_pin_X1 pin_A0
    ...
    mp_hal_pin_high(&pin_A0);

and now there is:

    extern const pin_obj_t pin_A0_obj;
    #define pin_A0 (&pin_A0_obj)
    #define pyb_pin_X1 pin_A0
    ...
    mp_hal_pin_high(pin_A0);

This patch should have minimal effect on board configuration files.  The
only change that may be needed is if a board has .c files that configure
pins.
2018-03-28 16:29:50 +11:00
iabdalkader
cf1d6df05a stm32/boards/NUCLEO_H743ZI: Enable SD card support. 2018-03-28 13:25:00 +11:00
Damien George
1efe6a0316 stm32/boards/NUCLEO_H743ZI: Update to build with new linker management. 2018-03-28 13:20:48 +11:00
Damien George
b121c9515d stm32/boards/stm32h743.ld: Remove include of common.ld.
The relevant common.ld file should now be included explicitly by a
particular board.
2018-03-28 13:20:07 +11:00
Damien George
4d409b8e32 stm32/boards/stm32f767.ld: Add definition of FLASH_APP.
This allows F767 MCUs to support a bootloader in the first sector.
2018-03-27 21:35:03 +11:00
Damien George
dcf4eb8134 stm32/boards: Add common_bl.ld for boards that need a bootloader. 2018-03-27 21:30:45 +11:00
Damien George
ddb3b84c70 stm32/boards: Add common_basic.ld for a board to have a single section. 2018-03-27 21:29:45 +11:00
Damien George
ed75b2655f stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.
This patch forces a board to explicitly define TEXT1_ADDR in order to
split the firmware into two separate pieces.  Otherwise the default is now
to produce only a single continuous firmware image with all ISR, text and
data together.
2018-03-27 21:24:15 +11:00
Damien George
95b2cb008e stm32/Makefile: Rename FLASH_ADDR/TEXT_ADDR to TEXT0_ADDR/TEXT1_ADDR.
To make it clearer that these addresses are both for firmware text and that
they have a prescribed ordering.
2018-03-27 21:20:04 +11:00
Damien George
7aec06ca9a stm32/boards: Allow boards to have finer control over the linker script.
This patch allows a particular board to independently specify the linker
scripts for 1) the MCU memory layout; 2) how the different firmware
sections are arranged in memory.  Right now all boards follow the same
layout with two separate firmware section, one for the ISR and one for the
text and data.  This leaves room for storage (filesystem data) to live
between the firmware sections.

The idea with this patch is to accommodate boards that don't have internal
flash storage and only need to have one continuous firmware section.  Thus
the common.ld script is renamed to common_ifs.ld to make explicit that it
is used for cases where the board has internal flash storage.
2018-03-27 21:17:48 +11:00
Damien George
6b51eb22c8 stm32: Consolidate include of genhdr/pins.h to single location in pin.h.
genhdr/pins.h is an internal header file that defines all of the pin
objects and it's cleaner to have pin.h include it (where the struct's for
these objects are defined) rather than an explicit include by every user.
2018-03-27 20:25:24 +11:00
iabdalkader
7b0a020a02 stm32/boards/NUCLEO_H743ZI: Disable uSD transceiver.
There's no uSD Transceiver on this NUCLEO board.
2018-03-20 23:26:03 +11:00
iabdalkader
1e0a67f290 stm32/boards/NUCLEO_H743ZI: Enable hardware I2C support. 2018-03-20 23:25:43 +11:00
Damien George
e37b8ba5a5 stm32: Use STM32xx macros instead of MCU_SERIES_xx to select MCU type.
The CMSIS files for the STM32 range provide macros to distinguish between
the different MCU series: STM32F4, STM32F7, STM32H7, STM32L4, etc.  Prefer
to use these instead of custom ones.
2018-03-17 10:42:50 +11:00
Damien George
22a9158ced stm32/boards/STM32L476DISC: Enable CAN peripheral.
This board allows to test CAN support on the L4 series.
2018-03-15 16:32:11 +11:00
Damien George
bb3359f357 stm32/boards/STM32L476DISC: Provide SPI-flash bdev config.
This board shows how to configure external SPI flash as the main storage
medium.  It uses software SPI.
2018-03-10 00:59:43 +11:00
iabdalkader
88157715db stm32/boards: Add startup_stm32l4.s for L4 series specific startup. 2018-03-09 15:14:10 +11:00
iabdalkader
e3b81f5712 stm32/boards: Add startup_stm32f4.s for F4 series specific startup. 2018-03-09 15:14:03 +11:00
iabdalkader
d84f1a90cc stm32/boards: Add startup_stm32f7.s for F7 series specific startup. 2018-03-09 15:13:56 +11:00
iabdalkader
0f5cce7753 stm32/boards: Add startup_stm32h7.s for H7 series specific startup. 2018-03-09 15:13:13 +11:00
iabdalkader
fabfacf3d7 stm32/boards: Add new NUCLEO_H743ZI board configuration files.
USB serial and mass storage works, and the REPL is also available via the
UART through the on-board ST-LINK.
2018-03-09 15:08:11 +11:00
Damien George
8522874167 stm32/boards: Add stm32h743.ld linker script. 2018-03-09 15:08:11 +11:00
Damien George
a3c721772e stm32/boards: Add stm32h743_af.csv file describing H7 GPIO alt funcs. 2018-03-09 14:06:34 +11:00
sec2
250b24fe36 stm32/boards/NUCLEO_F767ZI: Update pins list to include 3 extra pins. 2018-03-07 18:53:02 +11:00
sec2
bda3620616 stm32/boards/stm32f767_af.csv: Add ADC column to pin capability list. 2018-03-07 18:40:06 +11:00
Damien George
34911f1a57 stm32/boards: Update all boards to work with new USB configuration. 2018-02-13 18:57:01 +11:00
Damien George
3eb0694b97 stm32: Update HAL macro and constant names to use newer versions.
Newer versions of the HAL use names which are cleaner and more
self-consistent amongst the HAL itself.  This patch switches to use those
names in most places so it is easier to update the HAL in the future.
2018-02-13 15:37:35 +11:00
Damien George
02f88cb2df stm32/boards: Remove all config options that are set to defaults.
mpconfigboard_common.h now sets the defaults so there is no longer a need
to explicitly list all configuration options in a board's mpconfigboard.h
file.
2018-02-09 18:40:40 +11:00
Damien George
6515acca70 stm32/boards/*_af.csv: Make consistent use of JTMS, JTCK, SWDIO, SWCLK.
5-pin JTAG and 2-pin SWD are logically separate interfaces so encode them
in the AF tables as separate entries (separated by /, not -).
2017-12-01 14:51:36 +11:00
Damien George
8f20231909 stm32/boards/stm32f767_af.csv: Update AF table based on datasheet.
Based on ST datasheet, DocID029041 Rev 3, DM00273119.pdf.
2017-12-01 14:48:17 +11:00
Damien George
6906255dcd stm32/boards: Remove obsolete and unused board-specific defines.
These board-level macros have been completely replaced by feature-level
config options.
2017-11-20 15:25:28 +11:00
Jaroslav Sykora
3e9e9b07ba stm32/boards: Add support for NUCLEO-F746ZG evaluation board.
This is a low-cost evaluation kit board from ST based on the STM32
Nucleo-144 form factor.  It uses the STM32F746ZG MCU in the LQFP144
package.  The MCU has 1MB of flash and 320kB of System RAM.
Cortex-M7 runs at up to 216MHz.
2017-11-20 14:42:05 +11:00
Damien George
bbac2df0cf stm32/boards/stm32f746_af.csv: Fix typos in AF table. 2017-11-20 14:19:12 +11:00
Damien George
2cafef857e stm32/boards/NUCLEO_F429ZI: Incr CPU freq to 168MHz to get USB working.
At the original frequency of 90MHz there's no way to get a 48MHz USB clock.
These new setting mirror those of the STM32F429DISC board.
2017-11-15 12:23:29 +11:00
Damien George
6f1a615427 stm32/boards: Fix typos in stm32f767_af.csv table. 2017-10-06 14:32:42 +11:00
Tobias Badertscher
bd71b3252a stm32/boards: Add new board B_L475E_IOT01A based on STM32L475. 2017-09-10 16:02:39 +10:00
Damien George
069fc48bf6 stm32/boards: Fix I2C1 pin mapping on NUCLEO_F401RE/F411RE boards.
This patch makes it consistent with the STM document describing the Arduino
layout.

Thanks to @shaoziyang for the original patch.
2017-09-06 15:41:12 +10:00
Damien George
21c889baeb stm32/boards: Change linker scripts to use "K" instead of hex byte size. 2017-09-06 15:24:08 +10:00
Damien George
81375eb470 stm32/boards: Change remaining stm32f4xx_hal_conf.h to unix line ending. 2017-09-06 15:02:21 +10:00
Damien George
4a93801c12 all: Update Makefiles and others to build with new ports/ dir layout.
Also renames "stmhal" to "stm32" in documentation and everywhere else.
2017-09-06 14:09:13 +10:00
Damien George
01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00