Commit Graph

20 Commits

Author SHA1 Message Date
Jim Mussared
1bf2dcb15e all: Rename mp_umodule*, mp_module_umodule* to remove the "u" prefix.
This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:04 +10:00
Damien George
38e7b842c6 ports: Implement simple write polling for stdout.
This is a best-effort implementation of write polling.  It's difficult to
do correctly because if there are multiple output streams (eg UART and USB
CDC) then some may not be writeable while others are.  A full solution
should also have a return value from mp_hal_stdout_tx_strn(), returning the
number of bytes written to the stream(s).  That's also hard to define.

The renesas-ra and stm32 ports already implement a similar best-effort
mechanism for write polling.

Fixes issue #11026.

Signed-off-by: Damien George <damien@micropython.org>
2023-03-23 13:51:17 +11:00
Damien George
136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Damien George
132d93886f ports: Use common mp_hal_stdout_tx_strn_cooked instead of custom one.
To reduce code duplication.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-08 12:59:31 +10:00
Damien George
8f20cdc353 all: Rename absolute time-based functions to include "epoch".
For time-based functions that work with absolute time there is the need for
an Epoch, to set the zero-point at which the absolute time starts counting.
Such functions include time.time() and filesystem stat return values.  And
different ports may use a different Epoch.

To make it clearer what functions use the Epoch (whatever it may be), and
make the ports more consistent with their use of the Epoch, this commit
renames all Epoch related functions to include the word "epoch" in their
name (and remove references to "2000").

Along with this rename, the following things have changed:

- mp_hal_time_ns() is now specified to return the number of nanoseconds
  since the Epoch, rather than since 1970 (but since this is an internal
  function it doesn't change anything for the user).

- littlefs timestamps on the esp8266 have been fixed (they were previously
  off by 30 years in nanoseconds).

Otherwise, there is no functional change made by this commit.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 17:20:34 +10:00
Damien George
ee50a6effe py/mphal.h: Introduce mp_hal_time_ns and implement on various ports.
This should return a 64-bit value being the number of nanoseconds since
1970/1/1.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-22 16:13:44 +10:00
Damien George
f2218c2fbd esp8266/esp_mphal: Move most functions in esp_mphal.c from iRAM to iROM.
The ones that are moved out of iRAM should not need to be there, because
either they call functions in iROM (eg mp_hal_stdout_tx_str), or they are
only ever called from a function in iROM and not from an interrupt (eg
ets_esf_free_bufs).

This frees up about 800 bytes of iRAM.
2020-05-08 23:44:57 +10:00
Damien George
e08ca78f40 py/stream: Remove mp_stream_errno and use system errno instead.
This change is made for two reasons:

1. A 3rd-party library (eg berkeley-db-1.xx, axtls) may use the system
   provided errno for certain errors, and yet MicroPython stream objects
   that it calls will be using the internal mp_stream_errno.  So if the
   library returns an error it is not known whether the corresponding errno
   code is stored in the system errno or mp_stream_errno.  Using the system
   errno in all cases (eg in the mp_stream_posix_XXX wrappers) fixes this
   ambiguity.

2. For systems that have threading the system-provided errno should always
   be used because the errno value is thread-local.

For systems that do not have an errno, the new lib/embed/__errno.c file is
provided.
2020-04-27 23:58:46 +10:00
stijn
84fa3312cf all: Format code to add space after C++-style comment start.
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
2020-04-23 11:24:25 +10:00
Jim Mussared
def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George
98a3911c43 py/scheduler: Add "raise_exc" argument to mp_handle_pending.
Previous behaviour is when this argument is set to "true", in which case
the function will raise any pending exception.  Setting it to "false" will
cancel any pending exception.
2020-02-07 16:08:20 +11:00
Damien George
c13f9f209d all: Convert nlr_raise(mp_obj_new_exception_msg(x)) to mp_raise_msg(x).
This helper function was added a while ago and these are the remaining
cases to convert, to save a bit of code size.
2019-11-05 11:35:45 +11:00
Damien George
c80614dfc8 ports: Provide mp_hal_stdio_poll for sys.stdio polling where needed. 2019-07-01 17:10:12 +10:00
Damien George
5357dad52e esp8266: Fix ticks_ms to correctly handle wraparound of system counter.
Fixes issue #4795.
2019-05-24 15:37:34 +10:00
Damien George
afd0701bf7 esp8266: Change UART(0) to attach to REPL via uos.dupterm interface.
This patch makes it so that UART(0) can by dynamically attached to and
detached from the REPL by using the uos.dupterm function.  Since WebREPL
uses dupterm slot 0 the UART uses dupterm slot 1 (a slot which is newly
introduced by this patch).  UART(0) must now be attached manually in
boot.py (or otherwise) and inisetup.py is changed to provide code to do
this.  For example, to attach use:

    import uos, machine
    uart = machine.UART(0, 115200)
    uos.dupterm(uart, 1)

and to detach use:

    uos.dupterm(None, 1)

When attached, all incoming chars on UART(0) go straight to stdin so
uart.read() will always return None.  Use sys.stdin.read() if it's needed
to read characters from the UART(0) while it's also used for the REPL (or
detach, read, then reattach).  When detached the UART(0) can be used for
other purposes.

If there are no objects in any of the dupterm slots when the REPL is
started (on hard or soft reset) then UART(0) is automatically attached.
Without this, the only way to recover a board without a REPL would be to
completely erase and reflash (which would install the default boot.py which
attaches the REPL).
2018-05-21 11:31:59 +10:00
Damien George
37282f8fc1 extmod/uos_dupterm: Update uos.dupterm() and helper funcs to have index.
The uos.dupterm() signature and behaviour is updated to reflect the latest
enhancements in the docs.  It has minor backwards incompatibility in that
it no longer accepts zero arguments.

The dupterm_rx helper function is moved from esp8266 to extmod and
generalised to support multiple dupterm slots.

A port can specify multiple slots by defining the MICROPY_PY_OS_DUPTERM
config macro to an integer, being the number of slots it wants to have;
0 means to disable the dupterm feature altogether.

The unix and esp8266 ports are updated to work with the new interface and
are otherwise unchanged with respect to functionality.
2017-10-13 20:01:57 +11:00
Damien George
a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Damien George
b00040c43c esp8266/esp_mphal: Send data in chunks to mp_uos_dupterm_tx_strn.
Sending byte-by-byte is inefficient and leads to errors in the WebSocket
protocol when sending utf-8 encoded characters.
2017-10-03 23:24:24 +11:00
Damien George
01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00