Commit Graph

1129 Commits

Author SHA1 Message Date
Damien George
c62351fbd6 py/mpconfig.h: Revert MICROPY_REPL_INFO to disabled at all levels.
This is an stm32-specific feature that's accessed via the pyb module, so
not something that will be widely enabled.

Signed-off-by: Damien George <damien@micropython.org>
2021-11-01 15:18:22 +11:00
Jim Mussared
3041881353 stm32/mpconfigport.h: Use the "extra" feature level.
This commit is a no-op change.  Future improvements can come from making
individual boards use CORE or BASIC.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-11-01 15:02:22 +11:00
Damien George
83827e8e63 stm32/uart: Fix race conditions and clearing status in IRQ handler.
Prior to this commit IRQs on STM32F4 could be lost because SR is cleared by
reading SR then reading DR.  For example, if both RXNE and IDLE IRQs were
active upon entry to the IRQ handler, then IDLE is lost because the code
that handles RXNE comes first and accidentally clears SR (by reading SR
then DR to get the incoming character).

This commit fixes this problem by making the IRQ handler more atomic in the
following operations:
- get current IRQ status flags
- deal with RX character
- clear remaining status flags
- call user handler

On the STM32F4 it's very hard to get this right because the only way to
clear IRQ status flags is to read SR then DR, but the read of DR may read
some data which should remain in the register until the user wants to read
it.  And it won't work to cache the read because RTS/CTS flow control will
then not work.  So instead the new code disables interrupts if the DR is
full and waits for the user to read it before reenabling the interrupts.

Fixes issue mentioned in #4599 and #6082.

Signed-off-by: Damien George <damien@micropython.org>
2021-10-28 13:14:21 +11:00
Mike Causer
590ec2ca6e stm32/boards: Add images to board.json for Adafruit and VCC_GND boards. 2021-10-28 09:52:59 +11:00
Jim Mussared
e359b077dd ports: Add board.json for all boards.
This will be used by https://micropython.org/download/ to generate the
full listing of boards and firmware files.

Optionally supports a board.md for additional customisation of the
download page, as well as deploy.md for flashing instructions.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-27 14:04:53 +11:00
Damien George
30268c93dc stm32/pendsv: Allow a board to add entries for pendsv_schedule_dispatch.
Signed-off-by: Damien George <damien@micropython.org>
2021-10-20 21:20:18 +11:00
Damien George
69522822de stm32/mpbthciport: Allow a board to hook BT HCI poll functions.
Signed-off-by: Damien George <damien@micropython.org>
2021-10-20 21:20:18 +11:00
Damien George
5f2f9044ff stm32/usbd_cdc_interface: Allow a board to hook into USBD CDC RX events.
Signed-off-by: Damien George <damien@micropython.org>
2021-10-20 21:20:18 +11:00
iabdalkader
eea6cd85b3 stm32/sdram: Enforce gcc opt, and use volatile and DSB in sdram_test.
Ensures consistent behaviour and resolves the D-Cache bug (the "exhaustive"
argument being lost due to cache being turned off) when O0 is used.

The changes in this commit are:

- Change -O0 to -Os because "gcc is considered broken at -O0" according to
  https://github.com/ARM-software/CMSIS_5/issues/620#issuecomment-550235656

- Use volatile for mem_base so the compiler doesn't optimise away reads or
  writes to the SDRAM, which is being tested.

- Use DSB to prevent any other compiler optimisations that would change the
  testing logic.

- Use alternating pattern/antipattern in exhaustive test to catch more
  hardware/configuration errors.

Implementation adapted by @andrewleech, taken directly from investigation
by @iabdalkader and @dpgeorge.

See #7841 and #7869 for further discussion.
2021-10-15 17:59:31 +11:00
iabdalkader
67d1dca9c2 stm32/machine_i2c: Use hardware I2C for STM32H7. 2021-09-21 18:13:28 +10:00
roland van straten
9eff4029ab stm32/boards: Add PF11-BOOT0 to stm32f091_af.csv.
PF11 is added so it can be used as GPIO.
2021-09-21 18:11:42 +10:00
Ned Konz
99bb52047c stm32/boards/NUCLEO_H743ZI: Enable VfsLfs2 on NUCLEO_H743ZI(2) boards. 2021-09-21 18:02:19 +10:00
Ned Konz
8c214ed200 stm32: Extended flash filesystem space to 512K on H743 boards.
The H743 has equal sized pages of 128k, which means the filesystem doesn't
need to be near the beginning.  This commit moves the filesystem to the
very end of flash, and extends it to 512k (4 pages).

Signed-off-by: Damien George <damien@micropython.org>
2021-09-21 18:02:14 +10:00
iabdalkader
782d5b2e53 stm32: Enable platform module.
The HAL version is based on the stm32lib version.
2021-09-19 23:35:44 +10:00
Chris Fiege
6e39f2cc1e stm32/boards: Add OLIMEX H407 board definition.
This change adds the OLIMEX H407 support to the STM32 port.  The H407
(https://www.olimex.com/Products/ARM/ST/STM32-H407/) is simliar to the
already existing E407
(https://www.olimex.com/Products/ARM/ST/STM32-E407) but does not support
Ethernet and has a full-size USB-A port instead of a Mini-USB socket.

Both boards use the STM32F407ZGT6 CPU.

This port is basically a copy of the E407 but with changed pinmux:
* Removed Ethernet pin definition
* Removed UART1 (pins are used for other functions)
* Removed UART3 flow control pins (pins are used for other functions)
* Removed SD-Card detect pin (since it is not connected on the H407)

A REPL on UART3 is connected to the U3BOOT-header, a 3-pin header with RX,
TX and GND that is intended for the serial terminal.

Tested:
* Micro-SD Card is detected when inserted on RESET
* REPL on UART3 works
* Serial port on the mini USB socket

Signed-off-by: Chris Fiege <cfi@pengutronix.de>
2021-09-19 16:58:58 +10:00
Jim Mussared
b326edf68c all: Remove MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE.
This commit removes all parts of code associated with the existing
MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE optimisation option, including the
-mcache-lookup-bc option to mpy-cross.

This feature originally provided a significant performance boost for Unix,
but wasn't able to be enabled for MCU targets (due to frozen bytecode), and
added significant extra complexity to generating and distributing .mpy
files.

The equivalent performance gain is now provided by the combination of
MICROPY_OPT_LOAD_ATTR_FAST_PATH and MICROPY_OPT_MAP_LOOKUP_CACHE (which has
been enabled on the unix port in the previous commit).

It's hard to provide precise performance numbers, but tests have been run
on a wide variety of architectures (x86-64, ARM Cortex, Aarch64, RISC-V,
xtensa) and they all generally agree on the qualitative improvements seen
by the combination of MICROPY_OPT_LOAD_ATTR_FAST_PATH and
MICROPY_OPT_MAP_LOOKUP_CACHE.

For example, on a "quiet" Linux x64 environment (i3-5010U @ 2.10GHz) the
change from CACHE_MAP_LOOKUP_IN_BYTECODE, to LOAD_ATTR_FAST_PATH combined
with MAP_LOOKUP_CACHE is:

diff of scores (higher is better)
N=2000 M=2000       bccache -> attrmapcache      diff      diff% (error%)
bm_chaos.py        13742.56 ->   13905.67 :   +163.11 =  +1.187% (+/-3.75%)
bm_fannkuch.py        60.13 ->      61.34 :     +1.21 =  +2.012% (+/-2.11%)
bm_fft.py         113083.20 ->  114793.68 :  +1710.48 =  +1.513% (+/-1.57%)
bm_float.py       256552.80 ->  243908.29 : -12644.51 =  -4.929% (+/-1.90%)
bm_hexiom.py         521.93 ->     625.41 :   +103.48 = +19.826% (+/-0.40%)
bm_nqueens.py     197544.25 ->  217713.12 : +20168.87 = +10.210% (+/-3.01%)
bm_pidigits.py      8072.98 ->    8198.75 :   +125.77 =  +1.558% (+/-3.22%)
misc_aes.py        17283.45 ->   16480.52 :   -802.93 =  -4.646% (+/-0.82%)
misc_mandel.py     99083.99 ->  128939.84 : +29855.85 = +30.132% (+/-5.88%)
misc_pystone.py    83860.10 ->   82592.56 :  -1267.54 =  -1.511% (+/-2.27%)
misc_raytrace.py   21490.40 ->   22227.23 :   +736.83 =  +3.429% (+/-1.88%)

This shows that the new optimisations are at least as good as the existing
inline-bytecode-caching, and are sometimes much better (because the new
ones apply caching to a wider variety of map lookups).

The new optimisations can also benefit code generated by the native
emitter, because they apply to the runtime rather than the generated code.
The improvement for the native emitter when LOAD_ATTR_FAST_PATH and
MAP_LOOKUP_CACHE are enabled is (same Linux environment as above):

diff of scores (higher is better)
N=2000 M=2000        native -> nat-attrmapcache  diff      diff% (error%)
bm_chaos.py        14130.62 ->   15464.68 :  +1334.06 =  +9.441% (+/-7.11%)
bm_fannkuch.py        74.96 ->      76.16 :     +1.20 =  +1.601% (+/-1.80%)
bm_fft.py         166682.99 ->  168221.86 :  +1538.87 =  +0.923% (+/-4.20%)
bm_float.py       233415.23 ->  265524.90 : +32109.67 = +13.756% (+/-2.57%)
bm_hexiom.py         628.59 ->     734.17 :   +105.58 = +16.796% (+/-1.39%)
bm_nqueens.py     225418.44 ->  232926.45 :  +7508.01 =  +3.331% (+/-3.10%)
bm_pidigits.py      6322.00 ->    6379.52 :    +57.52 =  +0.910% (+/-5.62%)
misc_aes.py        20670.10 ->   27223.18 :  +6553.08 = +31.703% (+/-1.56%)
misc_mandel.py    138221.11 ->  152014.01 : +13792.90 =  +9.979% (+/-2.46%)
misc_pystone.py    85032.14 ->  105681.44 : +20649.30 = +24.284% (+/-2.25%)
misc_raytrace.py   19800.01 ->   23350.73 :  +3550.72 = +17.933% (+/-2.79%)

In summary, compared to MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE, the new
MICROPY_OPT_LOAD_ATTR_FAST_PATH and MICROPY_OPT_MAP_LOOKUP_CACHE options:
- are simpler;
- take less code size;
- are faster (generally);
- work with code generated by the native emitter;
- can be used on embedded targets with a small and constant RAM overhead;
- allow the same .mpy bytecode to run on all targets.

See #7680 for further discussion.  And see also #7653 for a discussion
about simplifying mpy-cross options.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-09-16 16:04:03 +10:00
Jim Mussared
68219a295c stm32: Enable LOAD_ATTR fast path, and map lookup caching on >M0.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-09-16 16:02:19 +10:00
Damien George
0c0807e084 stm32/dma: Add functions for external users of DMA to enable clock.
Any external user of DMA (eg a board with a custom DMA driver) must call
dma_external_acquire() for their DMA controller/stream to ensure that the
DMA clock is not automatically turned off while it's still being used
externally.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-16 13:01:43 +10:00
Damien George
c51cc46bf8 stm32/boards/make-pins.py: Allow empty lines and comments in pins.csv.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-16 12:53:16 +10:00
Damien George
a6907c779a stm32/boards/make-pins.py: Allow a CPU pin to be hidden.
This change allows a CPU pin to be hidden from the user by prefixing it
with a "-" in the pins.csv file for a board.  It will still be available in
C code, just not exposed to Python.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-16 12:53:16 +10:00
Jim Mussared
e3eebc329f stm32: Suggest putting code in main.py not boot.py.
Don't want users to accidentally use boot.py (because recovering requires
knowing how to activate safe mode).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-09-16 12:40:05 +10:00
Jan Staal
9e2423e730 stm32: Add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn.
This commit is based upon prior work of @dpgeorge and @koendv.

MCU support for the STM32H7A3 and B3 families MCUs:
- STM32H7A3xx
- STM32H7A3xxQ (SMPS)
- STM32H7B3xx
- STM32H7B3xxQ (SMPS)

Support has been added for the STM32H7B3I_DK board.

Signed-off-by: Jan Staal <info@janstaal.com>
2021-09-16 12:29:28 +10:00
iabdalkader
d9749f90ad extmod/modnetwork: Remove modnetwork socket u_state member.
To simplify the socket state.

The CC3K driver (see drivers/cc3000/inc/socket.h and src/socket.c) has
socket() returning an INT16 so there is now enough room to store it
directly in the fileno member.
2021-09-15 11:29:02 +10:00
Jan Hrudka
d451dc0086 stm32: Add basic support for STM32H750. 2021-09-15 10:42:20 +10:00
iabdalkader
4dba04a50f extmod/modnetwork: Define network interfaces in port config files.
So this network implementation becomes more generic.
2021-09-15 01:29:26 +10:00
iabdalkader
7aab0dc5d8 extmod: Move modnetwork and modusocket from stm32 to extmod.
So they can be used by other ports.
2021-09-15 01:25:12 +10:00
Damien George
0a51073724 stm32/boards: Remove trailing spaces, and add newline at end of file.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-10 16:09:03 +10:00
Tobias Thyrrestrup
4c31d0ab60 stm32/boards/LEGO_HUB_NO6: Remove user paths from cc2564 init file.
Signed-off-by: Tobias Thyrrestrup <tt@LEGO.com>
2021-09-10 16:00:21 +10:00
Daniel Gorny
b71c621f46 stm32/boards/OLIMEX_E407: Add Ethernet RMII support. 2021-09-10 15:52:03 +10:00
Boris Vinogradov
97bbc0bb91 stm32/boards/VCC_GND_H743VI: Add board definition for VCC_GND_H743VI. 2021-09-10 15:49:26 +10:00
Damien George
9792c9105f stm32/main: Don't unconditionally enable GPIO A,B,C,D clocks.
Rely on them being enabled only when needed.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 20:28:53 +10:00
Damien George
05cd17e36f stm32/pin: Enable GPIO clock of pin if it's constructed without init.
Fixes issue #7363.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 20:28:53 +10:00
Damien George
afe0634c98 extmod/machine_spi: Make SoftSPI configurable via macro option.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Damien George
122d901ef1 extmod/machine_i2c: Make SoftI2C configurable via macro option.
The zephyr port doesn't support SoftI2C so it's not enabled, and the legacy
I2C constructor check can be removed.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Damien George
25f30eb8a6 stm32/boards/LEGO_HUB_NO6: Add comment re constraints on SPI flash cfg.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 00:03:41 +10:00
David Lechner
86371781e9 tools/uncrustify: Force 1 newline at end of file.
To keep things neat and tidy, we ensure that each file has 1 and only 1
newline at the end of each file.

Signed-off-by: David Lechner <david@pybricks.com>
2021-08-31 13:14:45 +10:00
Damien George
6f19b9c08d stm32/boards/LEGO_HUB_NO6: Add make commands to backup/restore firmware.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-31 00:16:39 +10:00
Damien George
bac791c5fd stm32/boards/LEGO_HUB_NO6: Skip first 1MiB of SPI flash for storage.
The first 1MiB is used by the built-in bootloader and is best left as-is.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-31 00:16:39 +10:00
Damien George
e3eed26d0b stm32/boards/LEGO_HUB_NO6: Change SPI flash storage to use hardware SPI.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-31 00:16:39 +10:00
Damien George
6936f410ab stm32/storage: Make extended-block-device more configurable.
A board can now define the following to fully customise the extended block
device interface provided by the storage sub-system:
- MICROPY_HW_BDEV_BLOCKSIZE_EXT
- MICROPY_HW_BDEV_READBLOCKS_EXT
- MICROPY_HW_BDEV_WRITEBLOCKS_EXT
- MICROPY_HW_BDEV_ERASEBLOCKS_EXT

Signed-off-by: Damien George <damien@micropython.org>
2021-08-31 00:16:39 +10:00
Jim Mussared
b51e7e9d01 stm32: Disable computed goto on constrained boards.
Saves ~1kiB.  Add comment to this effect to mpconfig.h.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-20 20:18:52 +10:00
Damien George
61d5a8b9ce stm32/stm32_it: Support TIM17 IRQs on WB MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-20 17:04:39 +10:00
Tobias Thyrrestrup
0886bf46ca stm32/Makefile: Allow GIT_SUBMODULES and LIBS to be extended.
Signed-off-by: Tobias Thyrrestrup <tt@LEGO.com>
2021-08-19 22:56:39 +10:00
Jim Mussared
e64cda5295 stm32: Add implementation of machine.bitstream.
Hand-written version for M0, and cycle-counter version for everything else.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Jim Mussared
5733c49174 stm32,esp32,rp2: Enable MICROPY_PY_FSTRINGS by default.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-14 16:58:40 +10:00
Ned Konz
42d1a1635c stm32/mbedtls: Fix compile warning about uninitialized val. 2021-08-10 23:43:25 +10:00
Ned Konz
a0cd18c1a5 stm32/boards/NUCLEO_H743ZI2: Add modified version of NUCLEO_H743ZI.
This commit creates a new stm32 board for the NUCLEO_H743ZI2, which is the
current version of this from ST.  This is a modified copy of the
NUCLEO_H743ZI board, and the ZI2 board differs in a few minor ways:

- LED2 has moved from PB7 to PE1 and is now yellow rather than blue
- the USB power enable has moved from PG6 to PG10
- the USER button is now pulled down
2021-08-10 23:38:05 +10:00
Damien George
f834fef6bb stm32/powerctrl: Support changing frequency on WB MCUs.
This allows changing the frequency to: 100kHz, 200kHz, 400kHz, 800kHz,
1MHz, 2MHz, 4MHz, 8MHz, 16MHz, 32MHz, 64MHz.  For frequencies 2MHz and
below, low power run (LPR) mode is enabled automatically.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 23:41:20 +10:00
Damien George
3b32b3d1b3 stm32/usbd_cdc_interface: Rename USBD_CDC_xx opts to MICROPY_HW_USB_xx.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 23:13:58 +10:00
Damien George
f28e8b9073 stm32/usbd_desc: Rename USBD_xxx descriptor opts to MICROPY_HW_USB_xxx.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 23:13:58 +10:00