Commit Graph

11 Commits

Author SHA1 Message Date
Jatty_
30e50ab195 stm32/make-stmconst.py: Support TypeDef's with a single char prefix.
Update the regex to support parsing files from the STM32CubeU5 library.
2022-09-23 16:09:38 +10:00
Herwin Grobben
160e4d9a6d stm32/fdcan: Fix FIFO1 usage and handling of error interrupts.
The original code used a independent state with regards to the interrupt.
During heavy bus error conditions the internal state could become
out-of-sync with the interrupts.

Further explanation: during the development of an application using CAN
communication, a interrupt-run-away was found in some situations.  It was
found that the error interrupt triggered (Warning, Passive or Bus-Off, all
triggered it) the run-away.  The only recovery was a reset.

Two problems were found:
- the error interrupt is enabled but not cleared in the interrupt routine;
- an internal variable 'State' that was used to track the message received
  state (empty, new, full, overflow) that was not directly related to
  interrupt that indicated the state.

In this commit these issues are fixed by adding more values for the
interrupt reason (warning, passive, bus off) and clearing the error
interrupts, and making the internal state directly dependent on the
interrupt state for received messages.

Furthermore, introducing the FIFO1 in the CAN receive stage, another issue
existed.  Even if the messages are received into the FIFO1 (by selecting
message filtering for FIFO0 and FIFO1), the interrupt firing was indicating
FIFO0 Rx.  The configuration of the interrupts for this is now also fixed.
The CAN peripheral has 2 interrupt lines going into the NVIC controller.
The assignment of the interrupt reasons to these 2 interrupt lines was
missing.  Now the reception of FIFO1 messages triggers the second interrupt
line.  Other interrupts (Rx FIFO0 and bus error) are assigned to the first
interrupt line.

Tested on a Nucleo-G474, and also checked the HAL function to work with the
H7 family.
2022-01-27 23:01:08 +11:00
Jim Mussared
3770fab334 all: Update Python formatting to latest Black version 21.12b0.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-09 12:09:40 +11:00
Herwin Grobben
35c602d3b8 stm32/make-stmconst.py: Allow "[]" chars when parsing source comments.
For STM32WB MCUs, EXTI offset addresses were not parsed due to the
appearance of "[31:0]" in a comment in the .h file.
2021-03-10 23:44:02 +11:00
Jim Mussared
b27edb8073 stm32/make-stmconst.py: Add support for WB55 header files. 2020-09-08 23:23:23 +10:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George
d42392b9a7 stm32/make-stmconst.py: Allow more variation in parens and int-suffix L. 2019-07-17 16:27:17 +10:00
Dave Hylands
92fec603d0 stm32/make-stmconst.py: Improve regex to parse more constants.
A few RTC constants weren't being parsed properly due to whitespace
differences, and this patch makes certain whitespace optional.  Changes
made:

- allow for no space between /*!< and EXTI, eg for:
  __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */

- allow for no space between semicolon and start of comment, eg for:
  __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */
2019-02-19 15:17:28 +11:00
Damien George
8a949ba599 stm32: Introduce MICROPY_PY_STM config to include or not the stm module.
By default the stm module is included in the build, but a board can now
define MICROPY_PY_STM to 0 to not include this module.  This reduces the
firmware by about 7k.
2018-04-24 12:01:49 +10:00
Damien George
eea5fcc442 stm32/make-stmconst.py: Make sure mpz const data lives in ROM. 2017-09-12 15:31:43 +10:00
Damien George
01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00