Commit Graph

224 Commits

Author SHA1 Message Date
iabdalkader
e35bcb0f0b rp2/boards/ARDUINO_NANO_RP2040: Add more modules and enable MD5 hash.
Changes in this commit are:
- Enable MD5 hash to verify Nina WiFi firmware.
- Add ntptime, urequests and espflash to manifest.
2022-11-14 19:06:51 +11:00
Angus Gratton
c8913fdbfa rp2: Allow enabling USB device without enabling USB-CDC.
Requires changing the USB-CDC stdin/stdout guards from
MICROPY_HW_ENABLE_USBDEV to the new (in this port)
MICROPY_HW_USB_CDC.
2022-11-11 16:49:18 +11:00
Angus Gratton
2e6e53057b shared/tinyusb: Further refactor static USB device implementation.
App the mp_ prefix to usbd_ symbols and files which are defined here and
not in TinyUSB.

rp2 only for now. This includes some groundwork for dynamic USB devices
(defined in Python).

This work was funded through GitHub Sponsors.

Signed-off-by: Angus Gratton <angus@redyak.com.au>
2022-11-11 16:47:36 +11:00
Blake Felt
eed4eb2645 shared/tinyusb: Create common TinyUSB code for reuse by ports.
This code originates from the rp2 port, and the rp2 port has been updated
to use this common code.
2022-11-11 16:33:30 +11:00
robert-hh
acadc0a7dc rp2/modmachine: Move dht_readinto() to the machine module. 2022-11-09 15:57:17 +11:00
iabdalkader
345f1d2395 rp2/cyw43_configport: Make sure only core0 executes a __WFI().
This commit executes __WFI() on core 0 only to avoid core1 locking up since
it doesn't enable any interrupts by default (except for `SIO_IRQ_PROC1`).
This fixes a lockup when calling `cyw43_do_ioctl` from core1.

Fixes issue #9597.
2022-11-09 12:00:10 +11:00
robert-hh
8447fef9f9 rp2/mphalport: Add a timeout to mp_hal_stdout_tx_strn().
If USB CDC is connected and the board sends data, but the host does not
receive the data, the device locks up.  This is fixed in this commit by
having a timeout of 500ms, after which time the transmission is skipped.

Fixes issue #9634.
2022-11-09 11:12:53 +11:00
Damien George
8874a09119 extmod/mbedtls: Enable elliptic curve DH and DSA cryptography.
This is necessary to access sites that only support these protocols.

The rp2 port already has ECDH enabled, so this just adds ECDSA there.  The
other ports now gain both ECDH and ECDSA.  The code size increase is:

- rp2 (PICO_W): +2916 bytes flash, +24 bytes BSS
- stm32 (PYBD_SF6): +20480 bytes flash, +32 bytes data, +48 bytes BSS
- mimxrt (TEENSY41): +20708 bytes flash, +32 bytes data, +48 bytes BSS
- unix (standard x86-64): +39344 executable, +1744 bytes data, +96 BSS

This is obviously a large increase in code size.  But there doesn't seem to
be any other option because without elliptic curve cryptography devices are
partially cut off from the internet.  For use cases that require small
firmware size, they'll need to build custom firmware with a custom mbedtls
config.

Signed-off-by: Damien George <damien@micropython.org>
2022-10-22 19:08:21 +11:00
Damien George
9347545f9e extmod/mbedtls: Enable MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE.
This was already enabled on all ports except mimxrt.  Now it's enabled on
all of them.

Signed-off-by: Damien George <damien@micropython.org>
2022-10-22 19:06:21 +11:00
Damien George
b337678964 extmod/mbedtls: Add common configuration file, and use it in all ports.
This is a no-op change.

Signed-off-by: Damien George <damien@micropython.org>
2022-10-22 19:06:21 +11:00
iabdalkader
22ad45fda6 rp2: Rename machine I2C type consistently across ports.
This renames:
- machine_hw_i2c_type -> machine_i2c_type
2022-10-22 12:56:58 +11:00
robert-hh
92d9118038 rp2/fatfs_port: Fix the modification date of files.
It was off by 2000 % 128 == 80 years.

Addresses issue #9535.
2022-10-12 00:31:38 +11:00
Jim Mussared
924a3e03ec top: Replace upip with mip everywhere.
Updates all README.md and docs, and manifests to `require("mip")`.

Also extend and improve the documentation on freezing and packaging.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-30 17:34:03 +10:00
Matt Trentini
bdbc44474f rp2/boards/WEACTSTUDIO: Add WEACTSTUDIO with multiple variants.
This supports 2, 4, 8 and 16MB flash variants.
2022-09-26 12:40:14 +10:00
Matt Trentini
0bc1d10557 rp2/Makefile: Add support for BOARD_VARIANTS.
Following stm32.  This allows a single board definition to define variants
of its configuration.
2022-09-26 12:38:58 +10:00
Jim Mussared
94beeabd2e py/obj: Convert make_new into a mp_obj_type_t slot.
Instead of being an explicit field, it's now a slot like all the other
methods.

This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:15 +10:00
Jim Mussared
6da41b5900 py/obj: Merge getiter and iternext mp_obj_type_t slots.
The goal here is to remove a slot (making way to turn make_new into a slot)
as well as reduce code size by the ~40 references to mp_identity_getiter
and mp_stream_unbuffered_iter.

This introduces two new type flags:
- MP_TYPE_FLAG_ITER_IS_ITERNEXT: This means that the "iter" slot in the
  type is "iternext", and should use the identity getiter.
- MP_TYPE_FLAG_ITER_IS_CUSTOM: This means that the "iter" slot is a pointer
  to a mp_getiter_iternext_custom_t instance, which then defines both
  getiter and iternext.

And a third flag that is the OR of both, MP_TYPE_FLAG_ITER_IS_STREAM: This
means that the type should use the identity getiter, and
mp_stream_unbuffered_iter as iternext.

Finally, MP_TYPE_FLAG_ITER_IS_GETITER is defined as a no-op flag to give
the default case where "iter" is "getiter".

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:13 +10:00
Jim Mussared
a52cd5b07d py/obj: Add accessors for type slots and use everywhere.
This is a no-op, but sets the stage for changing the mp_obj_type_t
representation.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:07 +10:00
Jim Mussared
9dce82776d all: Remove unnecessary locals_dict cast.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared
662b9761b3 all: Make all mp_obj_type_t defs use MP_DEFINE_CONST_OBJ_TYPE.
In preparation for upcoming rework of mp_obj_type_t layout.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared
ca51d63c37 rp2/Makefile: Add link to build troubleshooting on failure.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-15 12:22:18 +10:00
Jim Mussared
dec0ff7a10 rp2/boards: Remove all I2C,SPI pin defs that already match pico-sdk.
I.e. for whichever SPI/I2C instance is PICO_DEFAULT_I2C, there's no need to
set MICROPY_HW_SPIn_SCK.

The only ones remaining are for the non-default instance.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:51:15 +10:00
Jim Mussared
315e74236f rp2/machine_i2c: Use pico-sdk's default pins for I2C.
Inherits the default values for whichever instance is PICO_DEFAULT_I2C.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:51:11 +10:00
Jim Mussared
29437205f2 rp2/machine_spi: Use pico-sdk's default pins for SPI.
Rather than hardcoding the defaults, use pico-sdk's board definition.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:51:04 +10:00
Jim Mussared
c364301817 rp2/boards: Set PICO_BOARD correctly for each board.
In most cases, it's calculated automatically from the board name, and so
doesn't need to be set at all.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:50:54 +10:00
Phil Howard
6aa3c94634 rp2/rp2_flash: Add start/len support to rp2.Flash() constructor.
This allows support for partitioned flash on rp2 boards.

See issue #9208.

Signed-off-by: Phil Howard <phil@gadgetoid.com>
2022-09-08 14:37:41 +10:00
Jim Mussared
d84c6ef0e8 ports: Use micropython-lib version of drivers in manifests. 2022-09-08 11:27:05 +10:00
Jim Mussared
203dae41fb all: Update all manifest.py files to use new features.
Changes in this commit:
- Manifest include's now use the directory path where possible (no longer
  necessary to include the manifest.py file explicitly).
- Add manifest.py for all drivers and components that are referenced by
  port/board manifests.
- Replace all uses of freeze() with package()/module(), except for port and
  board modules.
- Use opt=3 everywhere, for consistency and to reduce code size.
- Use require() instead of include() for all micropython-lib references.
- Remove support for optional board-level manifest.py in mimxrt port, to
  make it behave the same as other ports (the board must set
  FROZEN_MANIFEST to a custom manifest.py, which can optionally include the
  default, port-level manifest).
- Also reinstates modules that were accidentally removed from the esp8266
  512k build in fbe9417b90.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2022-09-05 18:43:18 +10:00
Jim Mussared
da7f2537a1 top: Use micropython-lib unconditionally in manifests.
micropython-lib is now a submodule, and the manifest compilation process
will ensure it is available, so manifests no longer need to check that it
is available.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-05 17:00:43 +10:00
hoihu
85a25895ff rp2/mbedtls: Fix missing time.h include. 2022-08-31 00:22:34 +10:00
robert-hh
2488311dc2 rp2/machine_uart: Implement uart.flush() and uart.txdone().
uart.flush()

flush() will wait until all characters have been sent. It may return
while the last character is sent. if needed, the calling code has to
add one character wait time. To avoid a permanent lock, a timeout
applies depending on the size of txbuf and the baud rate.

ret = uart.txdone()

ret is True if no transfer is in progress. It may return True if the
last byte of a transfer is sent.
ret is False otherwise.
2022-08-31 00:17:54 +10:00
Jim Mussared
8a0ee5a5c0 py/objstr: Split mp_obj_str_from_vstr into bytes/str versions.
Previously the desired output type was specified.  Now make the type part
of the function name.  Because this function is used in a few places this
saves code size due to smaller call-site.

This makes `mp_obj_new_str_type_from_vstr` a private function of objstr.c
(which is almost the only place where the output type isn't a compile-time
constant).

This saves ~140 bytes on PYBV11.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 16:43:55 +10:00
robert-hh
47c45d0e7f rp2/machine_wdt: Check for the maximum timeout value of watchdog.
The value will be checked for timeout <= 8388.  Notes were added to the
documentation.
2022-08-23 16:26:29 +10:00
Jacob Siverskog
0546a12238 rp2: Correctly determine path to arm-none-eabi-size.
Figure out path to arm-none-eabi-size the same way it's done for the
other binaries, instead of assuming it to be in the user's $PATH.

Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
2022-08-11 14:23:28 +10:00
Phil Howard
71f6eb5ac9 rp2: Mark gc_heap NOLOAD for faster boot.
Create a new linker section .unitialized_bss for bss that does not need
zero-initialising.

Move gc_heap to this section, which saves ~30ms from rising edge of RESET
to setting a pin HIGH in MicroPython.

Zero fill happens in Pico SDK crt0.S before ROSC is configured.  It's very,
very slow.

Signed-off-by: Phil Howard <phil@gadgetoid.com>
2022-08-11 14:16:29 +10:00
omogenot
6e51dbd95a rp2/boards/W5500_EVB_PICO: Add new board definition for W5500_EVB_PICO.
Signed-off-by: github@mymeterinfo.info
2022-08-11 14:12:55 +10:00
Damien George
f72d3cec23 rp2/machine_spi: Add mp_hal_get_spi_obj helper function.
And remove the now-obsolete spi_from_mp_obj() function.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-10 14:05:02 +10:00
Ian Davies
fbe9417b90 extmod/ntptime: Factor out ntptime module from esp8266 port.
The ntptime module was previously only included in the ESP8266 port.  This
commit factors that module out into the extmod directory, makes it support
different epochs, and includes it in the rp2 port.
2022-08-06 00:08:32 +10:00
Ian Davies
b560b9fe71 rp2/mbedtls: Enable certificate validity time validation. 2022-08-06 00:08:01 +10:00
Jim Mussared
9a7ac41be6 rp2/Makefile: Always use cmake to discover submodules.
Used to be special-cased for Pico, but now everything depends on
micropython-lib if it's using a frozen manifest.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-03 00:05:54 +10:00
Peter Harper
45ab801c30 rp2/cyw43_configport: Add event hook into cyw43_delay_ms.
Still see some USB issues apparently caused by delays loading wifi
firmware.  cyw43_delay_ms is used to wait in the driver, so we should call
the event hook in there.

Fixes #8963.
2022-07-27 13:42:21 +10:00
Jim Mussared
092784da19 ports: Remove unused mp_type_{fileio/textio} macros in mpconfigport.h.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-26 18:07:22 +10:00
robert-hh
0c45a28d24 rp2/rp2_pio: Fix StateMachine.restart when PIO program is shared.
The state machines were not properly restarted in the case that the same
PIO program was shared among multiple StateMachine instances.  This is
because only the first StateMachine to use the program would set the
rp2_state_machine_initial_pc variable.

See https://forum.micropython.org/viewtopic.php?f=21&t=12776&p=69464#p69464
2022-07-26 02:00:01 +10:00
Damien George
f64862a766 rp2/cyw43_configport: Set CYW43_WIFI_NVRAM_INCLUDE_FILE value.
Required for latest cyw43-driver.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-26 01:39:30 +10:00
Peter Harper
33d6994d4c rp2/cyw43_configport: Set CYW43_EVENT_POLL_HOOK value.
This should allow USB to work while we're loading WiFi firmware.

Fixes issue #8904.
2022-07-26 01:39:08 +10:00
Jim Mussared
a053827084 extmod/network_ninaw10: Move ninaw10 root pointer registrations here.
Originally in drivers/ninaw10/nina_wifi_bsp.c but that isn't a QSTR source.

Also remove outdated commment about root pointers in mpconfigport.h.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-21 16:21:50 +10:00
Jim Mussared
8b4298a4bf rp2/mpbthciport: Remove mp_bthci_uart from set of root pointers.
This is a statically-allocated UART (see machine_uart.c), and doesn't
contain any heap pointers other than the ringbufs (which are already root
pointers), so no need to track it additionally.

Saves needing to add mpbthciport.c to the QSTR sources.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-21 16:19:42 +10:00
robert-hh
80339f1a33 ports: Adapt mimxrt, nrf and rp2 ports to work with latest TinyUSB.
rp2: change tud_task() to tud_task_ext().

mimxrt: use lib/tinyusb/src/portable/chipidea/ci_hs/dcd_ci_hs.c instead of
lib/tinyusb/src/portable/nxp/transdimension/dcd_transdimension.c.

nrf: add a definition for the changed tud_task().  tud_task() is changed
to tud_task_ext(), and the #define for backward compatibility is in
src/device/usbd.h.

The items I know which are fixed with this version:
- Fix for the SAMD USB lock-up.
- Support the MIMXRT11XX series of MCUs.
- Fix a wrong pin definition for MIMXRT1050_EVKB.

Tested with the MIMXRT boards, rp2 Pico, SAMD boards, nrf board.
2022-07-19 11:27:21 +10:00
Damien George
b89422ceaa extmod: Always use custom mbedtls error message code.
All ports that use mbedtls use the custom error messages in
mp_mbedtls_errors.c.  This commit simplifies the build so that ports don't
need to explicitly add this file, it's now used by default when mbedtls is
enabled.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-18 22:55:22 +10:00
David Lechner
7e4b205cb0 py/mpstate: Drop MICROPY_PORT_ROOT_POINTERS from mp_state_vm_t.
All in-tree uses of MICROPY_PORT_ROOT_POINTERS have been replaced with
MP_REGISTER_ROOT_POINTER(), so now we can remove both
MICROPY_PORT_ROOT_POINTERS and MICROPY_BOARD_ROOT_POINTERS from the code
and remaining config files.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:51:16 +10:00