Commit Graph

39 Commits

Author SHA1 Message Date
Damien George
20b4b85f72 ports: Enable MICROPY_PY_BUILTINS_ROUND_INT on selected ports. 2018-05-22 14:18:16 +10:00
Damien George
afd0701bf7 esp8266: Change UART(0) to attach to REPL via uos.dupterm interface.
This patch makes it so that UART(0) can by dynamically attached to and
detached from the REPL by using the uos.dupterm function.  Since WebREPL
uses dupterm slot 0 the UART uses dupterm slot 1 (a slot which is newly
introduced by this patch).  UART(0) must now be attached manually in
boot.py (or otherwise) and inisetup.py is changed to provide code to do
this.  For example, to attach use:

    import uos, machine
    uart = machine.UART(0, 115200)
    uos.dupterm(uart, 1)

and to detach use:

    uos.dupterm(None, 1)

When attached, all incoming chars on UART(0) go straight to stdin so
uart.read() will always return None.  Use sys.stdin.read() if it's needed
to read characters from the UART(0) while it's also used for the REPL (or
detach, read, then reattach).  When detached the UART(0) can be used for
other purposes.

If there are no objects in any of the dupterm slots when the REPL is
started (on hard or soft reset) then UART(0) is automatically attached.
Without this, the only way to recover a board without a REPL would be to
completely erase and reflash (which would install the default boot.py which
attaches the REPL).
2018-05-21 11:31:59 +10:00
Damien George
58331e3c28 esp8266/modmachine: Allow I2C and SPI to be configured out of the build.
I2C costs about 3000 bytes of code, and SPI costs about 4400 bytes.
2018-05-17 23:37:12 +10:00
Damien George
dd13065843 esp8266/modnetwork: Raise ValueError when getting invalid WLAN id.
Instead of crashing due to out-of-bounds array access.  Fixes #3348.
2018-05-17 22:12:24 +10:00
Damien George
f8a5cd24d8 esp8266/modnetwork: Return empty str for hostname if STA is inactive.
Instead of crashing due to NULL pointer dereference.  Fixes issue #3341.
2018-05-17 22:11:22 +10:00
Damien George
94a79f340d esp8266/mpconfigport.h: Add some weak links to common Python modules.
To make it easier/simpler to write code that can run under both CPython and
on an ESP8266 board.
2018-05-17 13:27:18 +10:00
Damien George
6410e174c5 esp8266: Disable DEBUG_PRINTERS for 512k build.
Disabling this saves around 6000 bytes of code space and gets the 512k
build fitting in the available flash again (it increased lately due to an
increase in the size of the ESP8266 SDK).
2018-05-02 15:51:19 +10:00
Lars Kellogg-Stedman
d8fdb77ac9 esp8266/modnetwork: Allow to get ESSID of AP that STA is connected to.
This patch enables iface.config('essid') to work for both AP and STA
interfaces.
2018-05-01 16:37:02 +10:00
Damien George
033c32e694 esp8266/esp_mphal.h: Fix I2C glitching by using input mode for od_high.
Certain pins (eg 4 and 5) seem to behave differently at the hardware level
when in open-drain mode: they glitch when set "high" and drive the pin
active high for a brief period before disabling the output driver.  To work
around this make the pin an input to let it float high.
2018-03-12 12:45:09 +11:00
Damien George
58ebeca6a9 drivers/bus: Pull out software SPI implementation to dedicated driver.
This patch takes the software SPI implementation from extmod/machine_spi.c
and moves it to a dedicated file in drivers/bus/softspi.c.  This allows the
SPI driver to be used independently of the uPy runtime, making it a more
general component.
2018-03-10 00:59:43 +11:00
Olivier Ortigues
b691aa0aae esp8266/esppwm: Always start timer to avoid glitch from full to nonfull.
The PWM at full value was not considered as an "active" channel so if no
other channel was used the timer used to mange PWM was not started.  So
when another duty value was set the PWM timer restarted and there was a
visible glitch when driving LEDs.  Such a glitch can be seen with the
following code (assuming active-low LED on pin 0):

    p = machine.PWM(machine.Pin(0))
    p.duty(1023) # full width, LED is off
    p.duty(1022) # LED flashes brightly then goes dim

This patch fixes the glitch.
2018-03-05 11:39:44 +11:00
Damien George
c5fe610ba1 esp8266/modnetwork: Implement WLAN.status('rssi') for STA interface.
This will return the RSSI of the AP that the STA is connected to.
2018-02-26 16:41:13 +11:00
Damien George
01dcd5bb71 esp8266/uart: Allow to compile with event-driven REPL. 2018-02-26 16:10:27 +11:00
Damien George
82828340a0 ports: Enable ucollections.deque on relevant ports.
These ports are all capable of running uasyncio.
2018-02-21 22:55:13 +11:00
Olivier Ortigues
359d2bdf84 esp8266/README.md: Update build instruction to reflect new ports dir. 2018-02-15 11:14:52 +11:00
Olivier Ortigues
5c83d05b49 esp8266/esppwm: Clip negative duty numbers to 0.
Prior to this patch a negative duty would lead to full PWM.
2018-02-15 11:12:41 +11:00
Damien George
a40ce1d829 esp8266/modules: Move dht.py driver to drivers/dht directory. 2018-01-31 18:11:06 +11:00
Damien George
9bcdb0acd1 esp8266/Makefile: Remove commented-out unused lines.
These were copied from the stm32 port (then stmhal) at the very beginning
of this port, with the anticipation that the esp8266 port would have board
definition files with a list of valid pins and their names.  But that has
not been implemented and likely won't be, so remove the corresponding lines
from the Makefile.
2017-12-22 17:16:42 +11:00
Damien George
badaf3ecfe esp8266/machine_hspi: After an SPI write wait for last byte to transfer.
Because otherwise the function can return with data still waiting to be
clocked out, and CS might then be disabled before the SPI transaction is
complete.  Fixes issue #3487.
2017-12-14 10:43:18 +11:00
Paul Sokolovsky
3a431fba50 esp8266/modnetwork: Make sure to intern string passed to .config("param").
This is the proper fix for
https://github.com/micropython/micropython/issues/3442.
2017-12-04 00:13:10 +02:00
Damien George
4e056d82cc esp8266/modules/webrepl_setup: Fix first-time enable of WebREPL.
Prior to this fix, enabling WebREPL for the first time via webrepl_setup
did not work at all because "boot.py" did not contain any lines with
"webrepl" in them that could be uncommented.
2017-11-30 10:54:33 +11:00
Damien George
4601759bf5 py/objstr: Remove "make_qstr_if_not_already" arg from mp_obj_new_str.
This patch simplifies the str creation API to favour the common case of
creating a str object that is not forced to be interned.  To force
interning of a new str the new mp_obj_new_str_via_qstr function is added,
and should only be used if warranted.

Apart from simplifying the mp_obj_new_str function (and making it have the
same signature as mp_obj_new_bytes), this patch also reduces code size by a
bit (-16 bytes for bare-arm and roughly -40 bytes on the bare-metal archs).
2017-11-16 13:17:51 +11:00
Paul Sokolovsky
964bf935a3 esp8266/esp8266_common.ld: Put .text of more libs into .irom0.text .
Recent vendor SDKs ship libs with code in .text section, which previously
was going into .irom0.text. Adjust the linker script to route these
sections back to iROM (follows upstream change).
2017-11-14 09:24:33 +02:00
Paul Sokolovsky
0535d03370 esp8266/README: Add section on using upip. 2017-11-12 18:34:56 +02:00
Paul Sokolovsky
9c209e4d09 esp8266/README: Emphasize the need to change default WiFi password. 2017-11-12 18:34:46 +02:00
Paul Sokolovsky
1b146e9de9 py/mpconfig: Introduce reusable MP_HTOBE32(), etc. macros.
Macros to convert big-endian values to host byte order and vice-versa.
These were defined in adhoc way for some ports (e.g. esp8266), allow
reuse, provide default implementations, while allow ports to override.
2017-11-08 19:47:37 +02:00
Paul Sokolovsky
e766a4af4a esp8266/etshal.h: Make function prototypes compatible with ESP SDK 2.1.0+.
In the vendor SDK 2.1.0, some of the functions which previously didn't
have prototypes, finally acquired them. Change prototypes on our side
to match those in vendor headers, to avoid warnings-as-errors.
2017-11-05 00:29:33 +02:00
Damien George
f4059dcc0c all: Use NULL instead of "" when calling mp_raise exception helpers.
This is the established way of doing it and reduces code size by a little
bit.
2017-10-24 22:39:36 +11:00
Damien George
37282f8fc1 extmod/uos_dupterm: Update uos.dupterm() and helper funcs to have index.
The uos.dupterm() signature and behaviour is updated to reflect the latest
enhancements in the docs.  It has minor backwards incompatibility in that
it no longer accepts zero arguments.

The dupterm_rx helper function is moved from esp8266 to extmod and
generalised to support multiple dupterm slots.

A port can specify multiple slots by defining the MICROPY_PY_OS_DUPTERM
config macro to an integer, being the number of slots it wants to have;
0 means to disable the dupterm feature altogether.

The unix and esp8266 ports are updated to work with the new interface and
are otherwise unchanged with respect to functionality.
2017-10-13 20:01:57 +11:00
Vitor Massaru Iha
1b7d6a7951 esp8266/modules/webrepl_setup: Add info about allowed password length.
This patch also makes the code more concise by combining the checks for the
password length.
2017-10-11 11:37:01 +11:00
Damien George
6db132e130 esp8266/modnetwork: Add "bssid" keyword arg to WLAN.connect() method. 2017-10-09 23:09:06 +11:00
Damien George
a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Damien George
b00040c43c esp8266/esp_mphal: Send data in chunks to mp_uos_dupterm_tx_strn.
Sending byte-by-byte is inefficient and leads to errors in the WebSocket
protocol when sending utf-8 encoded characters.
2017-10-03 23:24:24 +11:00
Damien George
da8c4c2653 py/builtinhelp: Change signature of help text var from pointer to array.
As a pointer (const char *) it takes up an extra word of storage which is
in RAM.
2017-09-12 16:03:52 +10:00
Paul Sokolovsky
9355cca610 esp8266: Set DEFPSIZE=1024, MINCACHE=3 for "btree" module.
Defaults of 4096 and 5 respectively are too high to esp8266, causing
out of memory with a database beyond couple of pages.
2017-09-10 13:54:00 +03:00
Paul Sokolovsky
9b4666dad5 esp8266/posix_helpers: Set ENOMEM on memory alloc failure.
POSIX requires malloc(), etc. to set ENOMEM on the failure, and e.g.
BerkeleyDB relies on this:

http://pubs.opengroup.org/onlinepubs/9699919799/functions/malloc.html

This should fix confusing OSError exceptions with 0 error code when
working with btree module.
2017-09-10 09:55:18 +03:00
Paul Sokolovsky
5671a11b81 esp8266: Rename axtls_helpers.c to posix_helpers.c.
As it's used by BerkeleyDB, etc.
2017-09-10 09:47:20 +03:00
Damien George
4a93801c12 all: Update Makefiles and others to build with new ports/ dir layout.
Also renames "stmhal" to "stm32" in documentation and everywhere else.
2017-09-06 14:09:13 +10:00
Damien George
01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00