Commit Graph

21 Commits

Author SHA1 Message Date
Jim Mussared
eb51ca4a11 esp32: Use extmod/modnetwork.c instead of port-specific version.
Rather than duplicating the implementation of `network`, this allows ESP32
to use the shared one in extmod.  In particular this gains access to
network.hostname and network.country.

Set default hostnames for various ESP32 boards.

Other than adding these two methods and the change to the default hostname,
there is no other user-visible change.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-03-01 01:26:54 +11:00
ma-lalonde
30db33d1e0 esp32/network_lan: Add support for Ethernet PHY KSZ8081.
This is available since ESP-IDF v4.4.

Signed-off-by: Damien George <damien@micropython.org>
2023-01-19 22:50:41 +11:00
Damien George
67097d8c2b esp32/network_lan: Fix compilation on IDF lower than v4.4.
Signed-off-by: Damien George <damien@micropython.org>
2023-01-18 13:47:10 +11:00
Damien Tournoud
c7301b8d03 esp32/network_lan: Fix setting MAC address of ethernet devices.
`esp_eth_ioctl(ETH_CMD_S_MAC_ADDR)` sets the MAC address of the hardware
device, but we also need to notify the upper layers of the change so that
e.g. DHCP work properly.
2023-01-18 11:19:12 +11:00
Damien Tournoud
e982c1d8de esp32/network_lan: Add support for SPI-based ethernet chips.
Add support for various SPI-based ethernet chips (W5500, KSZ8851SNL,
DM9051) to the ESP32 port.  This leverages the existing support in ESP-IDF
for these chips -- which configures these chips in "MAC raw" mode -- and
the existing support for network.LAN in the ESP32 port.  In particular,
this doesn't leverage the wiznet5k support that is used on the rp2 and
stm32 ports (because that's for native use of lwIP).

Tested on the POE Featherwing (with the SJIRQ solder jumper bridged) and a
ESP32-S3 feather.

A note about the interrupt pin: The W5500 implementation within ESP-IDF
relies on hardware interrupt, and requires the interrupt pin from the W5500
to be wired to a GPIO.  This is not the case by default on the Adafruit
Ethernet FeatherWing, which makes it not directly compatible with this
implementation.
2023-01-18 11:16:09 +11:00
robert-hh
4b52003fb8 esp32/network_lan: Support configuration of ETH ref_clk pin.
Both the direction and the Pin used for ref_clk can now be configured.  It
Requires at least idf v4.4.  The new keyword arguments to the constructor
are:

- ref_clk_mode=mode: with mode being Pin.IN or Pin.OUT.  If it is not set,
  then the default configuration is used, which may be configured by
  kconfig settings.

- ref_clk=pin_obj: which defines the Pin used for ref_clk.  This is either
  Pin(0), Pin(16) or Pin(17).  No check is done for the pin number.  If it
  is the wrong one, it simply will not work.  Besides that, no harm.
2023-01-18 10:05:13 +11:00
robert-hh
efb4bd3555 esp32/network_lan: Add support for LAN8710 PHY.
LAN8710 uses the same drivers as LAN8720, so this commit just adds the
names.  Alternatively, both could be summarised under LAN87xx, like the
esp-idf does.
2023-01-18 10:04:31 +11:00
Jim Mussared
94beeabd2e py/obj: Convert make_new into a mp_obj_type_t slot.
Instead of being an explicit field, it's now a slot like all the other
methods.

This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:15 +10:00
Jim Mussared
9dce82776d all: Remove unnecessary locals_dict cast.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared
662b9761b3 all: Make all mp_obj_type_t defs use MP_DEFINE_CONST_OBJ_TYPE.
In preparation for upcoming rework of mp_obj_type_t layout.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Damien George
5adb1fa40e esp32,esp8266: Extract qstr from object when comparing keys in config().
Following on from a previous fix for the same problem made in
3a431fba50.

Fixes issue #8052.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 14:27:13 +11:00
Tobias Eydam
48437cec45 esp32/network_lan: Add Ethernet support for IDF v4.1 and above.
Ethernet-PHYs from ESP-IDF (LAN8720, IP101, RTL8201, DP83848) are now
supported in IDF v4.1 and above.  PHY_KSZ8041 is only for ESP-IDF 4.3 and
above.  ESP32S2 is not supported.

Signed-off-by: Tobias Eydam <eydam-prototyping@outlook.com>
2021-06-17 15:36:14 +10:00
Kenneth Ryerson
76fefad18b esp32/network_lan: Add support for IP101 PHY.
Signed-off-by: Kenneth Ryerson <kenneth.ryerson@gmail.com>
2020-07-21 00:59:47 +10:00
stijn
84fa3312cf all: Format code to add space after C++-style comment start.
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
2020-04-23 11:24:25 +10:00
Jim Mussared
def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Damien George
69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Jim Mussared
96008ff59a esp32: Support building with ESP IDF 4.0-beta1.
This commit adds support for a second supported hash (currently set to the
4.0-beta1 tag).  When this hash is detected, the relevant changes are
applied.

This allows to start using v4 features (e.g. BLE with Nimble), and also
start doing testing, while still supporting the original, stable, v3.3 IDF.

Note: this feature is experimental, not well tested, and network.LAN and
network.PPP are currently unsupported.
2019-09-17 12:25:36 +10:00
Eric Poulsen
5635b96461 esp32: Add 'config' function to network.LAN, reusing network.WLAN. 2019-08-28 13:11:48 +10:00
Petr Kracík
5801a003f0 esp32/network_lan: Make power arg to constructor optional.
A value of None for this argument is already supported, so the argument can
be made optional.
2019-02-21 23:29:10 +11:00
Petr Kracík
7d8c71c222 esp32/network_lan: Add arg to constructor to set clock mode for ETH PHY.
This optional parameter for network.LAN clock_mode can be used for cases
where the clock source is different from the default GPIO0.  Fixes #4502.
2019-02-21 23:28:17 +11:00
Eric Poulsen
29dd6a7678 esp32: Implement wired Ethernet via network.LAN().
Updates to Makefile, modnetwork.c, and addition of network_lan.c to
implement `network.LAN()` object for wired PHY objects.
2017-12-13 14:48:53 +11:00