Commit Graph

16 Commits

Author SHA1 Message Date
Damien George
5c32111fa0 ports: Reformat more C and Python source code.
These files that are reformatted only now fall under the list of files to
apply uncrustify/black formatting to.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-20 16:17:35 +10:00
Damien George
43d50f006d stm32/mpconfigport.h: Let MICROPY_PY_IO_FILEIO take its default value.
This is enabled at MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES, which is the
default for stm32.  Not setting the value in mpconfigboard.h allows boards
to optionally configure it.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-07 13:25:48 +10:00
Damien George
df3f59ca4b ports: Update board.json files to link to new board images.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-07 11:33:28 +11:00
Damien George
5fc55999b2 stm32/boards: Remove unused MICROPY_HW_ENABLE_TIMER config.
Signed-off-by: Damien George <damien@micropython.org>
2021-12-10 23:19:00 +11:00
Jim Mussared
e359b077dd ports: Add board.json for all boards.
This will be used by https://micropython.org/download/ to generate the
full listing of boards and firmware files.

Optionally supports a board.md for additional customisation of the
download page, as well as deploy.md for flashing instructions.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-27 14:04:53 +11:00
Jim Mussared
b51e7e9d01 stm32: Disable computed goto on constrained boards.
Saves ~1kiB.  Add comment to this effect to mpconfig.h.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-20 20:18:52 +10:00
Mike Causer
47b778332a all: Replace busses with buses.
"buses" is the widely accepted plural form of "bus".
2021-05-20 23:22:03 +10:00
Damien George
799b6d1e0c extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the
MICROPY_VFS_FAT config to the Makefile level to replace it.  It also moves
the include of the oofatfs source files in the build from each port to a
central place in extmod/extmod.mk.

For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1
at the level of the Makefile.  This will include the relevant oofatfs files
in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
2019-11-11 11:37:38 +11:00
Damien George
287800d6e1 stm32: Convert to use FROZEN_MANIFEST to specify frozen code.
All symlinks are removed, frozen files are now referenced via
boards/manifest.py.
2019-10-15 21:36:24 +11:00
Chris Mason
eb12fa3862 stm32/powerctrlboot: Add support for HSI at 8MHz on F0 MCUs.
For use with F0 MCUs that don't have HSI48.  Select the clock source
explicitly in mpconfigboard.h.

On the NUCLEO_F091RC board use HSE bypass when HSE is chosen because the
NUCLEO clock source is STLINK not a crystal.
2019-09-26 17:34:04 +10:00
Damien George
009b1f6559 stm32/boards: Rework all stm32??xx_hal_conf.h files to use common code.
This eliminates a lot of duplicated code in these header files.
2019-06-25 14:18:24 +10:00
Damien George
11657f2f20 stm32/system_stm32f0: Add support for using HSE and PLL as SYSCLK.
To configure the SYSCLK on an F0 enable one of:

    MICROPY_HW_CLK_USE_HSI48
    MICROPY_HW_CLK_USE_HSE
    MICROPY_HW_CLK_USE_BYPASS
2019-04-18 16:00:45 +10:00
Damien George
4df1943948 stm32/boards/NUCLEO_F091RC: Enable USART3-8 with default pins. 2018-09-21 14:04:33 +10:00
Damien George
561ae9a91b stm32/boards/NUCLEO_F091RC: Fix TICK_INT_PRIORITY so it is highest prio.
Fixes issue #3880.
2018-06-20 12:24:18 +10:00
rolandvs
ca2b1d6b36 stm32/boards/NUCLEO_F091RC: Add Arduino-named pins and rename CPU pins.
To match pin labels on other NUCLEO 64 boards.
2018-06-18 13:06:27 +10:00
Damien George
e681372017 stm32/boards: Add NUCLEO_F091RC board configuration files. 2018-05-28 21:49:49 +10:00