Commit Graph

30 Commits

Author SHA1 Message Date
Andrew Scheller
cedb93c179 docs: Update Raspberry Pi URLs from .org to .com. 2022-06-14 11:41:13 +10:00
Damien George
9670a156da all: Rename MICROPY_PY_WIZNET5K to MICROPY_PY_NETWORK_WIZNET5K.
To match MICROPY_PY_NETWORK_CYW43 and MICROPY_PY_NETWORK_NINAW10.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
iabdalkader
2111ca0b8f rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Update USB PID.
This PID is allocated for the Arduino Nano RP2040 running MicroPython.
2022-06-03 16:12:44 +10:00
Andrew Leech
1b80aa9ce3 rp2/boards/W5100S_EVB_PICO: Add Wiznet W5100S-EVB-Pico board.
Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:34:29 +10:00
iabdalkader
875caca504 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Enable webrepl. 2022-05-25 16:05:50 +02:00
iabdalkader
a22d0bda52 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Disable internal errno.
* Internal errno can't be used with Nina module due to an issue
with esp-idf config.
2022-05-25 16:05:50 +02:00
Damien George
5c32111fa0 ports: Reformat more C and Python source code.
These files that are reformatted only now fall under the list of files to
apply uncrustify/black formatting to.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-20 16:17:35 +10:00
iabdalkader
507ad03329 rp2: Add USB MSC support.
It is currently not enabled by default on any board.
2022-03-09 00:38:07 +11:00
Damien George
000b001fc1 rp2/boards/GARATRONIC_PYBSTICK26_RP2040: Use correct pico-sdk board cfg.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-06 16:50:20 +11:00
iabdalkader
908e4cf5c3 rp2: Add support for DHT11 and DHT22 sensors. 2022-01-06 14:00:03 +11:00
iabdalkader
f4487a0049 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Set default I2C pins. 2022-01-06 13:35:20 +11:00
Frédéric Pierson
c422ca3da1 rp2/boards: Add PYBSTICK26 RP2040 board definition. 2021-11-25 21:05:21 +11:00
Mike Causer
172a031dff rp2/boards/PIMORONI_PICOLIPO_16MB: Fix 16MB flash size.
Was incorrectly added as 7MB for an 8MB SPI flash, but this board has a
16MB chip, not 8MB, so it should be 15MB leaving 1MB for MicroPython.

Thanks to @robert-hh
2021-11-19 15:34:07 +11:00
robert-hh
5ed7a748f0 rp2/boards: Add neopixel.py to manifest.py.
Because machine.bitstream is now implemented on the rp2 port.
2021-11-17 10:02:32 +11:00
iabdalkader
c3dceb1c32 rp2/boards: Add support for Arduino Nano RP2040. 2021-11-16 15:05:10 +11:00
Mike Causer
7f14344428 ports: Add images, features and urls to board.json. 2021-10-28 15:25:38 +11:00
Jim Mussared
e359b077dd ports: Add board.json for all boards.
This will be used by https://micropython.org/download/ to generate the
full listing of boards and firmware files.

Optionally supports a board.md for additional customisation of the
download page, as well as deploy.md for flashing instructions.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-27 14:04:53 +11:00
Mike Causer
71722c84ca rp2/boards: Add Pimoroni Tiny 2040. 2021-08-01 23:07:57 +10:00
Mike Causer
042a4bebc3 rp2/boards: Add Pimoroni Pico LiPo 16MB. 2021-08-01 23:07:05 +10:00
Mike Causer
95eff8d96a rp2/boards: Add Pimoroni Pico LiPo 4MB. 2021-08-01 23:06:06 +10:00
Mike Causer
02cbe018a5 rp2/boards: Add Adafruit QT Py RP2040. 2021-08-01 23:04:59 +10:00
Mike Causer
043848158d rp2/boards: Add Adafruit ItsyBitsy RP2040. 2021-08-01 23:03:30 +10:00
Mike Causer
e7a3e6ee6a rp2/boards/SPARKFUN_THINGPLUS: Configure I2C/SPI default pins. 2021-08-01 23:02:30 +10:00
Mike Causer
6986a8d680 rp2/boards/SPARKFUN_PROMICRO: Configure UART/I2C/SPI default pins. 2021-08-01 23:01:36 +10:00
Mike Causer
49497084f1 rp2/boards/ADAFRUIT_FEATHER_RP2040: Configure I2C/SPI default pins. 2021-08-01 17:15:18 +10:00
iabdalkader
23e2e00779 rp2/boards/ADAFRUIT_FEATHER_RP2040: Configure custom VID/PID. 2021-08-01 10:51:50 +10:00
Damien George
8172c2e9c5 rp2: Move manifest.py to boards directory.
To match other ports.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-04 23:39:24 +10:00
Jan Jurgen Griesfeller
d80a037e6b rp2/boards: Add board definition for SparkFun Pro Micro board. 2021-05-02 23:23:27 +10:00
Jan Jurgen Griesfeller
3c918d0f58 rp2/boards: Add board definition for SparkFun Thing Plus RP2040. 2021-05-02 23:22:46 +10:00
jahr
7ca686684e rp2: Add support for building different board configurations.
This change allows to build firmware for different rp2-based boards,
following how it is done in other ports like stm32 and esp32.  So far only
the original Pico and Adafruit Feather RP2040 are added.  Board names
should match (sans case) those in pico-sdk/src/boards/include/boards/.

Usage: Pico firmware can be build either using make as previously (it is
the default board) or by `make BOARD=PICO`.  Feather is built by `make
BOARD=ADAFRUIT_FEATHER_RP2040`.  Only the board name and flash drive size
is set, pin definition is taken from the appropriate pico-sdk board
definition.  Firmware is saved in the directory build-BOARD_NAME.
2021-04-12 21:40:32 +10:00