Commit Graph

214 Commits

Author SHA1 Message Date
robert-hh
0e215a9fba samd/mpconfigport: Provide the platform module.
Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-27 14:58:44 +10:00
robert-hh
057f3b0020 samd/mpconfigport: Enable DHT and onewire drivers on all MCUs/boards.
And move the setting to the samd-generic files, now that both samd21
and samd51 support it.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-27 14:58:07 +10:00
robert-hh
5ef7ce5116 samd/Makefile: Print memory region usage instead of totals.
Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-27 14:58:07 +10:00
robert-hh
cfaa9a4997 samd/Makefile: Move the math lib files from mpconfigmcu.mk to Makefile.
They are used by both SAMD21 and SAMD51.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-27 14:58:07 +10:00
robert-hh
909fe30dfd samd: Set the LFS type in mpconfigmcu.mk instead of mpconfigboard.mk.
SAMD21: set the filesystem type to LFS1.

SAMD51: the type is already set to LFS2, support is now dropped for LFS1.
It has not been used and dropping it saves 10 k of flash.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-27 14:57:41 +10:00
Jim Mussared
2fbc08c462 extmod/asyncio: Rename uasyncio to asyncio.
The asyncio module now has much better CPython compatibility and
deserves to be just called "asyncio".

This will avoid people having to write `from uasyncio import asyncio`.

Renames all files, and updates port manifests to use the new path. Also
renames the built-in _uasyncio to _asyncio.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-19 17:33:03 +10:00
Damien George
f01d5fb657 py/mkrules.mk: Automatically configure frozen options when manifest set.
Following how mkrules.cmake works.  This makes it easy for a port to enable
frozen code, by defining FROZEN_MANIFEST in its Makefile.

Signed-off-by: Damien George <damien@micropython.org>
2023-06-08 23:12:56 +10:00
Jim Mussared
5fd042e7d1 all: Replace all uses of umodule in Python code.
Applies to drivers/examples/extmod/port-modules/tools.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:24 +10:00
Jim Mussared
2eba98f1e0 all: Use MP_REGISTER_EXTENSIBLE_MODULE for overrideable built-ins.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:21 +10:00
Jim Mussared
45ac651d1a all: Rename *umodule*.c to remove the "u" prefix.
Updates any includes, and references from Makefiles/CMake.

This essentially reverts what was done long ago in commit
136b5cbd76

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:17 +10:00
Jim Mussared
f5f9edf645 all: Rename UMODULE to MODULE in preprocessor/Makefile vars.
This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:11 +10:00
Jim Mussared
7f5d5c7271 all: Rename mod_umodule*, ^umodule* to remove the "u" prefix.
This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:07 +10:00
Jim Mussared
1bf2dcb15e all: Rename mp_umodule*, mp_module_umodule* to remove the "u" prefix.
This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:04 +10:00
Jim Mussared
dfe232d000 py/builtinimport: Remove weak links.
In order to keep "import umodule" working, the existing mechanism is
replaced with a simple fallback to drop the "u".

This makes importing of built-ins no longer touch the filesystem, which
makes a typical built-in import take ~0.15ms rather than 3-5ms.

(Weak links were added in c14a81662c)

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:04 +10:00
Jim Mussared
30628d1bb7 all: Rename MP_QSTR_umodule to MP_QSTR_module everywhere.
This renames the builtin-modules, such that help('modules') and printing
the module object will show "module" rather than "umodule".

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:53:57 +10:00
robert-hh
db5444f68a samd/boards: Extend the code size limit for boards with external flash.
Code size limits are charged to:
- SAMD21:    184K -> 248K
- SAMD51x19: 368K -> 496K
- SAMD51x20: 368K -> 1008K

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-06 00:49:36 +10:00
robert-hh
69cb5e8f2a samd: Adapt existing samd.Flash and integrate with (Q)SPI flash in boot.
Checks are added to ensure, that only one of the flash drivers is selected.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-06 00:49:36 +10:00
robert-hh
2b5a5a0f35 samd/samd_qspiflash: Add QSPI flash driver and configure it accordingly.
The QSPI driver provides the interface for using an on-board QSPI flash for
the filesystem.  It provides the same methods as the driver for the
internal flash and uses the same name.  Therefore, only one of the drivers
for internal flash, SPI flash and QSPI flash must be enabled at a time.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-06 00:49:36 +10:00
robert-hh
5561130c3f samd/samd_spiflash: Add SPI flash driver and configure it accordingly.
The SPI flash driver includes the block device for being used as a
filesystem.  It provides the same methods as the driver for the internal
flash.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-06 00:49:36 +10:00
robert-hh
bf7d3ad8c6 samd/boards: Rename flash pins consistently for QSPI and SPI.
For SAMD21 devices, the board flash signals must be named in pins.csv as
FLASH_MOSI, FLASH_MISO, FLASH_SCK, FLASH_CS for creating the SPI object.

And rename the QSPI pins to QSPI_xxxx instead of FLASH_xxx.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-06 00:42:33 +10:00
Jim Mussared
1d4b4f0ce2 ports: Standardise docs link in help text.
Updates all `help()` output to use the phrase:
`For online docs please visit http://docs.micropython.org/`

Some ports previously used different wording, some pointed to the wrong
link.  Also make all ports use `help.c` for consistency.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-02 11:48:46 +10:00
robert-hh
73cc6b750e ports: Enable os.sync() for esp32, esp8266, rp2, mimxrt, samd51.
These have by default FAT support.  The SAMD21 build does not support FAT.
The nrf port also implements os.sync(), but has it's own copy of moduos.c.

Code size increases seen: 40 to 56 bytes.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-06-01 11:39:01 +10:00
robert-hh
c3f031afac samd/boards/ADAFRUIT_METRO_M4_EXPRESS: Add Metro M4 Express Airlift.
The board files can be used for both Adafruit Metro M4 variants.  The Wifi
support is in progress.
2023-05-23 10:17:16 +10:00
robert-hh
20fd22edad samd/machine_uart: Add support for UART hardware flow control.
By specifying rts=pin(x) and/or cts=Pin(x) in the constructor.  The pad
numbers for the UART pins are fix in this case: TX must be at pad 0, RX at
pad 1, RTS at pad 2 and CTS at pad 3.

repr(uart) shows the pin names for rts and cts, if set.  In case of a RX
overflow, the rx interrupt will be disabled instead of just discarding the
data.  That allows RTS to act.

If RTS is inactive, still 2 bytes can be buffered in the FIFO.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-05-23 09:53:24 +10:00
robert-hh
2a38531d73 samd/mcu: Reduce the startup time after hard reset.
With Crystal: set the crystal startup wait time to 1 second.  It was 2
seconds before, and that seeemed too long.

With USB-Sync: scan for up to 1 second for the USB to be registered and
carry on with boot as soon as it it.  Before, the code just waited for
500ms.

Side change: improve related comments.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-05-22 18:41:48 +10:00
robert-hh
984456731b samd/boards/SEEED_WIO_TERMINAL: Rename two pins starting with a digit.
So the names don't start with a digit, which isn't allowed in Python.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-05-22 18:40:23 +10:00
robert-hh
47fa723586 samd/modmachine: Make some machine classes configurable by #defines.
These include ADC, DAC, I2C, SoftI2C, SPI, SoftI2C, PWM, UART, pulse.  This
is useful for devices like the Adafruit Trinket series which have almost no
accessible GPIO pins.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-05-22 18:39:07 +10:00
robert-hh
b2df094bf8 samd/modmachine: Add machine.deepsleep as alias of machine.lightsleep.
Just for coverage.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-05-22 18:38:51 +10:00
robert-hh
7a847bab1e samd/main: Fix sercom deinit ordering in soft-reset.
If sockets were open when calling soft reset, gc_sweep_all() would try to
close them.  In case of e.g. the NINA WiFi handler, connected through SPI,
spi_transfer() would be called for command exchange with the NINA module.
But at that time SerCom was already disabled.

Moving sercom_deinit_all() behind gc_sweep_all() solves this issue.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-05-22 18:37:35 +10:00
robert-hh
b7180d53f0 samd/boards: Add default deploy instructions.
Signed-off-by: robert-hh <robert@hammelrath.com>
2023-05-22 18:37:24 +10:00
robert-hh
05e684dc07 samd/mcu/samd51: Enable MICROPY_ENABLE_EMERGENCY_EXCEPTION_BUF.
Signed-off-by: robert-hh <robert@hammelrath.com>
2023-05-22 18:37:11 +10:00
robert-hh
315eb949da samd: Rearrange the MCU-specific loader files.
Such that they are easier to adapt.  The maximum code size is set by:

    MICROPY_HW_CODESIZE=xxxK

in mpconfigmcu.mk for the MCU family as default or in mpconfigboard.mk for
a specific board.  Setting the maximum code size allows the loader to error
out if the code gets larger than the space dedicated for it.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-05-22 18:36:29 +10:00
robert-hh
457d9ee68a samd/boards/MINISAM_M4: Update pins.csv for the Mini SAM M4 board.
Signed-off-by: robert-hh <robert@hammelrath.com>
2023-05-22 18:36:07 +10:00
robert-hh
267d1ab2ba samd/mpconfigport: Drop support for SoftSPI max speed.
Saves ~140 bytes and is not really needed, since for higher baud rates hard
SPI is available.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-05-22 18:35:45 +10:00
Damien George
38243cd8e0 extmod/machine_pwm: Remove PWM_INIT and PWM_DUTY_U16_NS config options.
All ports that enable MICROPY_PY_MACHINE_PWM now enable these two
sub-options, so remove these sub-options altogether to force consistency in
new ports that implement machine.PWM.

Signed-off-by: Damien George <damien@micropython.org>
2023-05-04 13:19:19 +10:00
robert-hh
250757716a samd/machine_pwm: Add init() method to PWM and simplify the PWM code.
The PWM.init() method has been added.  Calling init() without arguments
restarts a PWM channel stopped with deinit().  Otherwise single parameters
except for "device=n" can be changed again.  The device can only be
specified once, either in the constructor or the first init() call.

Also simplify get_pwm_config() and get_adc_config(), and shrink the PWM
object.
2023-05-04 13:10:38 +10:00
Damien George
b1229efbd1 all: Fix spelling mistakes based on codespell check.
Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 18:03:06 +10:00
Damien George
d7cb53cb60 samd/modutime: Use extmod version of time module.
No API or functional change.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:51 +10:00
Damien George
9955553001 extmod/modutime: Provide a generic time module.
Based on extmod/utime_mphal.c, with:
- a globals dict added
- time.localtime wrapper added
- time.time wrapper added
- time.time_ns function added

New configuration options are added for this module:
- MICROPY_PY_UTIME (enabled at basic features level)
- MICROPY_PY_UTIME_GMTIME_LOCALTIME_MKTIME
- MICROPY_PY_UTIME_TIME_TIME_NS

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:09:56 +10:00
Damien George
083dc1f082 ports: Use extmod version of mktime instead of port-specific one.
Apart from slight differences in the error message, the functionality of
all ports is unchanged.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 14:55:07 +10:00
David Grayson
c046b23ea2 shared/runtime/pyexec: Don't allow Ctrl+C to interrupt frozen boot code.
Helps prevent the filesystem from getting formatted by mistake, among other
things.  For example, on a Pico board, entering Ctrl+D and Ctrl+C fast many
times will eventually wipe the filesystem (without warning or notice).

Further rationale: Ctrl+C is used a lot by automation scripts (eg mpremote)
and UI's (eg Mu, Thonny) to get the board into a known state.  If the board
is not responding for a short time then it's not possible to know if it's
just a slow start up (eg in _boot.py), or an infinite loop in the main
application.  The former should not be interrupted, but the latter should.
The only way to distinguish these two cases would be to wait "long enough",
and if there's nothing on the serial after "long enough" then assume it's
running the application and Ctrl+C should break out of it.  But defining
"long enough" is impossible for all the different boards and their possible
behaviour.  The solution in this commit is to make it so that frozen
start-up code cannot be interrupted by Ctrl+C.  That code then effectively
acts like normal C start-up code, which also cannot be interrupted.

Note: on the stm32 port this was never seen as an issue because all
start-up code is in C.  But now other ports start to put more things in
_boot.py and so this problem crops up.

Signed-off-by: David Grayson <davidegrayson@gmail.com>
2023-04-05 10:38:50 +10:00
Damien George
38e7b842c6 ports: Implement simple write polling for stdout.
This is a best-effort implementation of write polling.  It's difficult to
do correctly because if there are multiple output streams (eg UART and USB
CDC) then some may not be writeable while others are.  A full solution
should also have a return value from mp_hal_stdout_tx_strn(), returning the
number of bytes written to the stream(s).  That's also hard to define.

The renesas-ra and stm32 ports already implement a similar best-effort
mechanism for write polling.

Fixes issue #11026.

Signed-off-by: Damien George <damien@micropython.org>
2023-03-23 13:51:17 +11:00
robert-hh
be686e634e rp2: Allow disabling USB via MICROPY_HW_ENABLE_USBDEV config.
Previously, setting MICROPY_HW_ENABLE_USBDEV to 0 caused build errors.  The
change affects the nrf and samd ports as well, so MICROPY_HW_ENABLE_USBDEV
had to be explicitly enabled there.

The configuration options MICROPY_HW_ENABLE_USBDEV and
MICROPY_HW_ENABLE_UART_REPL are independent, and can be enabled or disabled
by a board.

Signed-off-by: Damien George <damien@micropython.org>
2023-03-20 22:33:45 +11:00
robert-hh
05bb26010e samd: Always provide the machine.RTC class.
Even if boards do not have a clock crystal.  In that case, the clock
quality will be very poor.

Always having machine.RTC means that the date/time can be set in a way that
is consistent with other ports.

This commit also removes the special code in modutime.c for devices without
the RTC class.

Signed-off-by: Damien George <damien@micropython.org>
2023-03-13 12:44:34 +11:00
iabdalkader
fb94ae48e9 samd/pendsv: Add MICROPY_BOARD_PENDSV_ENTRIES for board customisation. 2023-03-07 15:59:58 +11:00
Jim Mussared
69b93527d5 ports: Make BOARD default from BOARD_DIR in Makefile's.
This allows:

    $ make BOARD_DIR=path/to/board

to infer BOARD=board, rather than the previous behavior that required
additionally setting BOARD explicitly.

Also makes the same change for VARIANT_DIR -> VARIANT on Unix.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2023-02-23 09:47:08 +11:00
robert-hh
b110266897 samd/moduos: Add uos.urandom() using the phase-jitter rng.
This RNG passes many of the Diehard tests and also the AIS31 test suite.
The RNG is quite slow, delivering 200bytes/s.

Tested on boards with and without a crystal.
2023-02-21 23:17:44 +11:00
robert-hh
4160ec087b samd/mcu: Set the SAMD21 us-counter to 2 MHz for better resolution.
It turned out that the result of calling ticks_us() was always either odd
or even, depending on some internal state during boot.  So the us-counter
was set to a 2 MHz input and the result shifted by 1.  The counting period
is still long enough, since internally a (now) 63 bit value is used for us.
2023-02-21 23:17:12 +11:00
robert-hh
76cf98c35b samd/mcu: Implement a hardware seed for the SAMD21 random module.
By using the phase jitter between the DFLL48M clock and the FDPLL96M clock.
Even if both use the same reference source, they have a different jitter.
SysTick is driven by FDPLL96M, the us counter by DFLL48M.  As a random
source, the us counter is read out on every SysTick and the value is used
to accumulate a simple multiply, add and xor register.  According to tests
it creates about 30 bit random bit-flips per second.  That mechanism will
pass quite a few RNG tests, has a suitable frequency distribution and
serves better than just the time after boot to seed the PRNG.
2023-02-21 23:15:29 +11:00
robert-hh
7e0b1bc95d samd/mcu: Use the FDPLL96M clock for the SAMD21 CPU.
Allowing to increase the clock a little bit to 54Mhz.  Not much of a gain,
but useful for generating a RNG entropy source from the jitter between
DFLL48M and FDPLL96M.
2023-02-21 23:15:00 +11:00