Commit Graph

295 Commits

Author SHA1 Message Date
iabdalkader
921dd94676 nrf/main: Add startup and early-init board hook macros.
Following stm32 for naming and location of the hooks.  Also allow a board
to provide custom .c files to implement code for these hooks.
2022-06-17 13:23:45 +10:00
iabdalkader
99d3a73d59 nrf/modules/uos/microbitfs: Fix MICROPY_MBFS build to use mp_obj_malloc.
Changes introduced in 0e7bfc88c6 missed
changing this call to mp_obj_malloc.
2022-06-11 21:09:58 +10:00
Andrew Leech
494e8ba722 nrf/mpconfigport: Fix MICROPY_VFS IO build support. 2022-06-03 12:39:43 +10:00
Andrew Leech
c5878dd1f9 nrf/mpconfigport: Enable extra features as defined by ROM levels.
This commit enables extra features from the ROM levels and further
simplifies mpconfigport.h.  The changes are:

- NRF51822 & BLUETOOTH_SD -> MICROPY_CONFIG_ROM_LEVEL_MINIMUM
    - no changes

- NRF51822 -> MICROPY_CONFIG_ROM_LEVEL_CORE_FEATURES
    - MICROPY_PY_IO = 1

- NRF52832 -> MICROPY_CONFIG_ROM_LEVEL_BASIC_FEATURES
    - MICROPY_PY_IO = 1

- NRF52840, NRF9160 -> MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES
    - MICROPY_COMP_MODULE_CONST = 1
    - MICROPY_COMP_TRIPLE_TUPLE_ASSIGN = 1
    - MICROPY_OPT_MPZ_BITWISE = 1
    - MICROPY_PY_ALL_SPECIAL_METHODS = 1
    - MICROPY_PY_BUILTINS_EXECFILE = 1
    - MICROPY_PY_BUILTINS_SLICE_ATTRS = 1
    - MICROPY_PY_BUILTINS_STR_CENTER = 1
    - MICROPY_PY_BUILTINS_STR_PARTITION = 1
    - MICROPY_PY_BUILTINS_STR_SPLITLINES = 1
    - MICROPY_PY_CMATH = 1
    - MICROPY_PY_COLLECTIONS_ORDEREDDICT = 1
    - MICROPY_PY_FRAMEBUF = 1
    - MICROPY_PY_IO = 1
    - MICROPY_PY_MATH_SPECIAL_FUNCTIONS = 1
    - MICROPY_PY_SYS_STDIO_BUFFER = 1
    - MICROPY_PY_UCTYPES = 1
    - MICROPY_PY_UHEAPQ = 1
    - MICROPY_PY_UJSON = 1
    - MICROPY_PY_URE = 1
    - MICROPY_PY_UZLIB = 1
    - MICROPY_REPL_EMACS_KEYS = 1
2022-06-03 12:37:12 +10:00
Andrew Leech
13f5d38f2e nrf/mpconfigport: Set MICROPY_CONFIG_ROM_LEVEL defines for each MCU.
This commit is a no-op change to simplify existing config.
2022-06-03 12:36:40 +10:00
Damien George
efe23aca71 all: Remove third argument to MP_REGISTER_MODULE.
It's no longer needed because this macro is now processed after
preprocessing the source code via cpp (in the qstr extraction stage), which
means unused MP_REGISTER_MODULE's are filtered out by the preprocessor.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 16:31:37 +10:00
Damien George
6e71cde6aa ports: Use default VFS config for import_stat and builtin_open.
For ports with MICROPY_VFS and MICROPY_PY_IO enabled their configuration
can now be simplified to use the defaults for mp_import_stat and
mp_builtin_open.

This commit makes no functional change, except for the following minor
points:
- the built-in "open" is removed from the minimal port (it previously did
  nothing)
- the duplicate built-in "input" is removed from the esp32 port
- qemu-arm now delegates to VFS import/open

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Damien George
5956466c0e py/builtin: Clean up and simplify import_stat and builtin_open config.
The following changes are made:

- If MICROPY_VFS is enabled then mp_vfs_import_stat and mp_vfs_open are
  automatically used for mp_import_stat and mp_builtin_open respectively.

- If MICROPY_PY_IO is enabled then "open" is automatically included in the
  set of builtins, and points to mp_builtin_open_obj.

This helps to clean up and simplify the most common port configuration.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Jim Mussared
f67ac90fa9 nrf: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared
4eab44a1ec extmod: Make extmod modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Jim Mussared
0e7bfc88c6 all: Use mp_obj_malloc everywhere it's applicable.
This replaces occurences of

    foo_t *foo = m_new_obj(foo_t);
    foo->base.type = &foo_type;

with

    foo_t *foo = mp_obj_malloc(foo_t, &foo_type);

Excludes any places where base is a sub-field or when new0/memset is used.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-03 22:28:14 +10:00
Andrew Leech
303e222f70 nrf/modules: Include uasyncio in default board manifest. 2022-03-30 15:37:49 +11:00
Andrew Leech
f92da1adc4 nrf/drivers/usb: Fix MP_STREAM_POLL_RD support on USB CDC.
This gets ipoll working on USB CDC stdin.
2022-03-30 15:34:25 +11:00
Andrew Leech
dc8b43adc7 nrf/drivers/usb: Fix background events/scheduling while at USB REPL. 2022-03-30 15:33:29 +11:00
Damien George
fbd47fc46c ports: Consolidate inclusion of umachine module in built-ins.
The inclusion of `umachine` in the list of built-in modules is now done
centrally in py/objmodule.c.  Enabling MICROPY_PY_MACHINE will include this
module.

As part of this, all ports now have `umachine` as the core module name
(previously some had only `machine` as the name).

Signed-off-by: Damien George <damien@micropython.org>
2022-02-03 10:08:54 +11:00
Damien George
df3f59ca4b ports: Update board.json files to link to new board images.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-07 11:33:28 +11:00
Damien George
de43b500bd py/runtime: Allow initialising sys.path/argv with defaults.
If MICROPY_PY_SYS_PATH_ARGV_DEFAULTS is enabled (which it is by default)
then sys.path and sys.argv will be initialised and populated with default
values.  This keeps all bare-metal ports aligned.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-18 00:08:07 +11:00
Jim Mussared
86ce442607 ports: Add '.frozen' as the first entry in sys.path.
Frozen modules will be searched preferentially, but gives the user the
ability to override this behavior.

This matches the previous behavior where "" was implicitly the frozen
search path, but the frozen list was checked before the filesystem.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-18 00:08:07 +11:00
Jim Mussared
92353c2911 all: Remove support for FROZEN_DIR and FROZEN_MPY_DIR.
These have been deprecated for over two years in favour of FROZEN_MANIFEST
and manifest.py.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-17 23:54:05 +11:00
iabdalkader
78425208ba nrf/main: Use VFS helper function to mount fs and chdir. 2021-11-19 15:43:04 +11:00
Pooya Moradi
95ccd9a005 nrf/Makefile: Improve Black Magic Probe commands.
Used batch mode to get rid of the confirmation prompt on flashing.
Used 'compare-sections' to verify flash.
Removed the unnecessary `quit` at the end.
2021-11-17 14:32:02 +11:00
Mike Causer
7f14344428 ports: Add images, features and urls to board.json. 2021-10-28 15:25:38 +11:00
Jim Mussared
e359b077dd ports: Add board.json for all boards.
This will be used by https://micropython.org/download/ to generate the
full listing of boards and firmware files.

Optionally supports a board.md for additional customisation of the
download page, as well as deploy.md for flashing instructions.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-27 14:04:53 +11:00
Jim Mussared
b326edf68c all: Remove MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE.
This commit removes all parts of code associated with the existing
MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE optimisation option, including the
-mcache-lookup-bc option to mpy-cross.

This feature originally provided a significant performance boost for Unix,
but wasn't able to be enabled for MCU targets (due to frozen bytecode), and
added significant extra complexity to generating and distributing .mpy
files.

The equivalent performance gain is now provided by the combination of
MICROPY_OPT_LOAD_ATTR_FAST_PATH and MICROPY_OPT_MAP_LOOKUP_CACHE (which has
been enabled on the unix port in the previous commit).

It's hard to provide precise performance numbers, but tests have been run
on a wide variety of architectures (x86-64, ARM Cortex, Aarch64, RISC-V,
xtensa) and they all generally agree on the qualitative improvements seen
by the combination of MICROPY_OPT_LOAD_ATTR_FAST_PATH and
MICROPY_OPT_MAP_LOOKUP_CACHE.

For example, on a "quiet" Linux x64 environment (i3-5010U @ 2.10GHz) the
change from CACHE_MAP_LOOKUP_IN_BYTECODE, to LOAD_ATTR_FAST_PATH combined
with MAP_LOOKUP_CACHE is:

diff of scores (higher is better)
N=2000 M=2000       bccache -> attrmapcache      diff      diff% (error%)
bm_chaos.py        13742.56 ->   13905.67 :   +163.11 =  +1.187% (+/-3.75%)
bm_fannkuch.py        60.13 ->      61.34 :     +1.21 =  +2.012% (+/-2.11%)
bm_fft.py         113083.20 ->  114793.68 :  +1710.48 =  +1.513% (+/-1.57%)
bm_float.py       256552.80 ->  243908.29 : -12644.51 =  -4.929% (+/-1.90%)
bm_hexiom.py         521.93 ->     625.41 :   +103.48 = +19.826% (+/-0.40%)
bm_nqueens.py     197544.25 ->  217713.12 : +20168.87 = +10.210% (+/-3.01%)
bm_pidigits.py      8072.98 ->    8198.75 :   +125.77 =  +1.558% (+/-3.22%)
misc_aes.py        17283.45 ->   16480.52 :   -802.93 =  -4.646% (+/-0.82%)
misc_mandel.py     99083.99 ->  128939.84 : +29855.85 = +30.132% (+/-5.88%)
misc_pystone.py    83860.10 ->   82592.56 :  -1267.54 =  -1.511% (+/-2.27%)
misc_raytrace.py   21490.40 ->   22227.23 :   +736.83 =  +3.429% (+/-1.88%)

This shows that the new optimisations are at least as good as the existing
inline-bytecode-caching, and are sometimes much better (because the new
ones apply caching to a wider variety of map lookups).

The new optimisations can also benefit code generated by the native
emitter, because they apply to the runtime rather than the generated code.
The improvement for the native emitter when LOAD_ATTR_FAST_PATH and
MAP_LOOKUP_CACHE are enabled is (same Linux environment as above):

diff of scores (higher is better)
N=2000 M=2000        native -> nat-attrmapcache  diff      diff% (error%)
bm_chaos.py        14130.62 ->   15464.68 :  +1334.06 =  +9.441% (+/-7.11%)
bm_fannkuch.py        74.96 ->      76.16 :     +1.20 =  +1.601% (+/-1.80%)
bm_fft.py         166682.99 ->  168221.86 :  +1538.87 =  +0.923% (+/-4.20%)
bm_float.py       233415.23 ->  265524.90 : +32109.67 = +13.756% (+/-2.57%)
bm_hexiom.py         628.59 ->     734.17 :   +105.58 = +16.796% (+/-1.39%)
bm_nqueens.py     225418.44 ->  232926.45 :  +7508.01 =  +3.331% (+/-3.10%)
bm_pidigits.py      6322.00 ->    6379.52 :    +57.52 =  +0.910% (+/-5.62%)
misc_aes.py        20670.10 ->   27223.18 :  +6553.08 = +31.703% (+/-1.56%)
misc_mandel.py    138221.11 ->  152014.01 : +13792.90 =  +9.979% (+/-2.46%)
misc_pystone.py    85032.14 ->  105681.44 : +20649.30 = +24.284% (+/-2.25%)
misc_raytrace.py   19800.01 ->   23350.73 :  +3550.72 = +17.933% (+/-2.79%)

In summary, compared to MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE, the new
MICROPY_OPT_LOAD_ATTR_FAST_PATH and MICROPY_OPT_MAP_LOOKUP_CACHE options:
- are simpler;
- take less code size;
- are faster (generally);
- work with code generated by the native emitter;
- can be used on embedded targets with a small and constant RAM overhead;
- allow the same .mpy bytecode to run on all targets.

See #7680 for further discussion.  And see also #7653 for a discussion
about simplifying mpy-cross options.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-09-16 16:04:03 +10:00
Damien George
122d901ef1 extmod/machine_i2c: Make SoftI2C configurable via macro option.
The zephyr port doesn't support SoftI2C so it's not enabled, and the legacy
I2C constructor check can be removed.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
David Lechner
86371781e9 tools/uncrustify: Force 1 newline at end of file.
To keep things neat and tidy, we ensure that each file has 1 and only 1
newline at the end of each file.

Signed-off-by: David Lechner <david@pybricks.com>
2021-08-31 13:14:45 +10:00
Daniel Mizyrycki
8f45f5ee4f nrf: Set .mpy features consistent with documentation and other ports.
This allows nrf devices to load .mpy files.  And nrf52840 and nrf9160 based
boards also support compiling and loading native code.
2021-08-13 23:22:54 +10:00
Daniel Mizyrycki
8645b7c23b nrf: Enable source line on tracebacks. 2021-08-09 15:09:33 +10:00
Glenn Ruben Bakke
77b4cfcbc9 nrf/modules/nrf: Add function to enable/disable DCDC.
This function can be used to enable and disable the DC/DC converter with or
without the Bluetooth stack enabled.  It can also be used to query the
current state of the DC/DC.

This commit also adds a definition of ARRAY_SIZE needed by nrfx HAL-layer.
2021-08-09 14:55:59 +10:00
Damien George
e5e0553224 nrf/modules/uos: Add ilistdir to uos module.
This was missed in the initial implementation of the uos module.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
55d4321c3e nrf/boards: Enable MICROPY_VFS_LFS2 for all target boards.
Enable LittleFS v2 for all targets, except nrf51 targets when SoftDevice is
present.
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
23e8729d3e nrf/mphalport: Add dummy function for mp_hal_time_ns().
extmod/vfs_lfs.c needs to resolve `mp_hal_time_ns()` in order to calculate
a timestamp from 1970 epoch.  A wall clock is not available in the nrf
port, hence the function is implemented to resolve compilation linkage
error.  The function always return 0.
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
aa857eb65e nrf/Makefile: Set default manifest file for all targets.
Set the default manifest to "modules/manifest.py".  This includes files
from the folder "modules/scripts".  The manifest default value is overriden
by all nrf51 boards that have SoftDevice present (SD=s110) to save flash.

Also add "modules/manifest.py" which is set to freeze
"modules/scripts/_mkfs.py".
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
7b6ad0ce2e nrf/modules/scripts: Add file system formatting script.
Add a helper script _mkfs.py which automatically formats the file system if
nrf.Flash() is located and a VFS file system has been included in the
compilation.

The precedence is: first LFS1, LFS2 then FAT.
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
ffc636de2f nrf/boards: Set FROZEN_MANIFEST blank when SD present on nrf51 targets. 2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
990341d18e nrf: Facilitate use of freeze manifest.
Update the Makefile to handle FROZEN_MANIFEST, and the README with some
small samples on how to use freeze manifests.  And add BOARD_DIR to the
Makefile which can be referenced in boards/<board>/mpconfigboard.mk to
include a board specific manifest.
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
4326e08802 nrf/boards: Enable needed features for FAT/LFS1/LFS2.
Enable the following features for all boards except
nrf51 boards with SoftDevice present:

- MICROPY_VFS
- MICROPY_PY_NRF
- MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
b0fd4372c4 nrf/main: Add auto mount and auto format hook for internal flash FS. 2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
6ff3a2afef nrf/qstrdefsport.h: Add entries for in-built FS mount points. 2021-08-08 23:17:49 +10:00
Glenn Ruben Bakke
f99aa82e85 nrf/mpconfigport.h: Enable MICROPY_PY_IO_FILEIO when an FS is enabled.
Enable MICROPY_PY_IO_FILEIO if MICROPY_VFS_FAT, MICROPY_VFS_LFS1
or MICROPY_VFS2 has been enabled.
2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
7a833edf37 nrf/modules/uos: Allow a board to configure MICROPY_VFS_FAT/LFS1/LFS2. 2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
0bde907a8b nrf/Makefile: Add _fs_size linker script override from make.
Add posibility to override linker script "_fs_size" from make by adding the
FS_SIZE parameter.  The syntax of value is linker script syntax.  For
example, the value of 131072 bytes can be written as 128K like this:
FS_SIZE=128K.

If not set, default value for "_fs_size" from linker script will be used.
2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
c9b72ba694 nrf/mpconfigport.h: Tune FAT FS configuration.
Disable MICROPY_FATFS_MULTI_PARTITION configuration because there is no
partition table in the flash for FATFS to read.

Also, set MICROPY_FATFS_MAX_SS to the size of a flash page.  For nrf51 the
value 1024 is set.  For nrf52/nrf91 the value 4096 is set.
2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
b40dfa961d nrf/README: Update README.md to reflect internal file systems.
This documents parameters that can be passed to make to enable a specific
file system to included in the build.  Also, document the Makefile override
parameter "FS_SIZE" that can be used to tune the size of the flash region
to use as internal flash file system.
2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
85cad50266 nrf/mpconfigport.h: Expose nrf module when MICROPY_PY_NRF is set. 2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
5a873e27eb nrf/drivers: Add support for using flash block device with SoftDevice.
Update flash.c to also be compiled in when
MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE is enabled and SoftDevice is
present.

Update bluetooth/ble_drv.c to forward flash events to flash.c when
MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE is enabled.
2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
127cec8cae nrf/modules/nrf: Add new nrf module with flash block device.
This commit adds the "nrf" module for port specific modules and objects.
Included in it is the "Flash" object which exposes a block device
implementation to access internal SoC flash.

Thanks to @aykevl aka Ayke van Laethem for the initial implementation.
2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
3b594f7b27 nrf/boards/common.ld: Calculate unused flash region.
Calculate the unused flash area on the target device.  The values will be
exposed by _unused_flash_start and _unused_flash_length.  The start address
and the length are not aligned to either word or pages.
2021-08-08 23:09:26 +10:00
Damien George
96c6b8cae3 ports: Rename USBD_VID/PID config macros to MICROPY_HW_USB_VID/PID.
For consistency with other board-level config macros that begin with
MICROPY_HW_USB.

Also allow boards in the mimxrt, nrf and samd ports to configure these
values.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 23:13:55 +10:00
David P
d3f6ce7dc3 nrf/modules: Replace master/slave with controller/peripheral in SPI.
Also remove mistaken usage of MASTER/SLAVE constants in comments.
2021-07-18 11:23:41 +10:00