Commit Graph

1861 Commits

Author SHA1 Message Date
Damien George
581d43b774 stm32/usbd_cdc_interface: Check and handle CDC TX wrap-overflow.
If the device is not connected over USB CDC to a host then all output to
the CDC (eg initial boot messages) is written to the CDC TX buffer with
wrapping, so that the most recent data is retained when the USB CDC is
eventually connected (eg so the REPL banner is displayed upon connection).

This commit fixes a bug in this behaviour, which was likely introduced in
e4fcd216e0, where the initial data in the CDC
TX buffer is repeated multiple times on first connection of the device to
the host.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-22 15:32:41 +11:00
iabdalkader
a93d9b8c2d stm32: Fix broken build when FAT FS multi-partition is disabled. 2020-10-22 14:58:29 +11:00
Andrew Leech
97108fce57 esp32/mpconfigport.h: Enable MICROPY_PY_DELATTR_SETATTR.
To align with unix and stm32 ports.
2020-10-21 11:11:48 +11:00
Andrew Leech
32c99174e1 unix/mpconfigport.h: Enable MICROPY_PY_DELATTR_SETATTR.
This is a generally useful feature and because it's part of the object
model it cannot be added at runtime by some loadable Python code, so enable
it on the standard unix build.
2020-10-20 23:47:50 +11:00
Damien George
18518e26a7 ports: Use correct in/out endpoint size in TUD_CDC_DESCRIPTOR.
The last argument of TUD_CDC_DESCRIPTOR() is the endpoint size (or
wMaxPacketSize), not the CDC RX buffer size (which can be larger than the
endpoint size).

Signed-off-by: Damien George <damien@micropython.org>
2020-10-17 15:49:16 +11:00
Jim Mussared
893f75546c stm32/boards/NUCLEO_WB55/rfcore_firmware.py: Increase GET_STATE timeout.
When installing WS firmware, the very first GET_STATE can take several
seconds to respond (especially with the larger binaries like
BLE_stack_full).

Allows stm.rfcore_sys_hci to take an optional timeout, defaulting to
SYS_ACK_TIMEOUT_MS (which is 250ms).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-10-16 10:45:03 +11:00
Jim Mussared
dfb63b5613 stm32/boards/NUCLEO_WB55/rfcore_firmware.py: Fix bad variable name.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-10-16 10:44:58 +11:00
Jim Mussared
520bb88d70 stm32/boards/NUCLEO_WB55/rfcore_firmware.py: Fix flash unlock.
The flash can sometimes be in an already-unlocked state, and attempting to
unlock it again will cause an immediate reset.  So make _Flash.unlock()
check FLASH_CR_LOCK to get the current state.

Also fix some magic numbers for FLASH_CR_LOCK AND FLASH_CR_STRT.

The machine.reset() could be removed because it no longer crashes now that
the flash unlock is fixed.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-10-16 10:43:36 +11:00
Jim Mussared
fa12bfc227 stm32/rfcore: Update to support WS=1.9.0.0.4.
This WS update to 1.9.0.0.4 broke the workaround used in rfcore for
OCF_CB_SET_EVENT_MASK2, so fix it to support WS 1.8 and 1.9.
2020-10-09 23:52:35 +11:00
Jim Mussared
222ec1a4a8 stm32/boards/NUCLEO_WB55: Add standalone WB55 FUS/WS firmware updater.
This commit adds a script that can be run on-device to install FUS and WS
binaries from the filesystem.  Instructions for use are provided in
the rfcore_firmware.py file.

The commit also removes unneeded functionality from the existing rfcore.py
debug script (and renames it rfcore_debug.py).
2020-10-08 17:39:15 +11:00
Jim Mussared
7c76a2dfcf stm32/rfcore: Add Python API for basic rfcore operations.
The new functions provide FUS/WS status, version and SYS HCI commands:
- stm.rfcore_status()
- stm.rfcore_fw_version(fw_id)
- stm.rfcore_sys_hci(ogf, ocf, cmd)
2020-10-08 17:37:11 +11:00
iabdalkader
9855b9cd82 stm32/sdcard: Fix H7 build when using SDMMC2.
Changes are:
- Fix missing IRQ handler when SDMMC2 is used instead of SDMMC1 with H7
  MCUs.
- Removed outdated H7 series compatibility macros.
- Defined common IRQ handler macro for F4 series.
2020-10-06 23:33:38 +11:00
iabdalkader
7497d891a7 stm32/sdio: Don't change any DMA2 settings on H7 MCUs.
DMA2 clock and registers should be left in their current state in the H7
build.
2020-10-06 23:31:08 +11:00
Damien George
1dc64359da esp32: Use path relative to root for netutils/timeutils headers.
Signed-off-by: Damien George <damien@micropython.org>
2020-10-06 12:32:20 +11:00
Damien George
0fff2e03fe stm32/Makefile: Allow boards to extend SRC_C, SRC_O and OBJ variables.
Signed-off-by: Damien George <damien@micropython.org>
2020-10-02 15:46:13 +10:00
Damien George
817b80a102 unix/variants: Enable MICROPY_DEBUG_PARSE_RULE_NAME on coverage build.
Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 15:26:43 +10:00
Damien George
d4b61b0017 extmod/utime_mphal: Add generic utime.time_ns() function.
It requires mp_hal_time_ns() to be provided by a port.  This function
allows very accurate absolute timestamps.

Enabled on unix, windows, stm32, esp8266 and esp32.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 14:20:42 +10:00
Damien George
905a18aafe unix,windows: Implement mp_hal_time_ns using gettimeofday.
This provides microsecond accuracy.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 14:20:42 +10:00
Damien George
71f3ade770 ports: Support legacy soft I2C/SPI construction via id=-1 arg.
With a warning that this way of constructing software I2C/SPI is
deprecated.  The check and warning will be removed in a future release.

This should help existing code to migrate to the new SoftI2C/SoftSPI types.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
39d50d129c ports: Add SoftI2C and SoftSPI to machine module where appropriate.
Previous commits removed the ability for one I2C/SPI constructor to
construct both software- or hardware-based peripheral instances.  Such
construction is now split to explicit soft and non-soft types.

This commit makes both types available in all ports that previously could
create both software and hardware peripherals: machine.I2C and machine.SPI
construct hardware instances, while machine.SoftI2C and machine.SoftSPI
create software instances.

This is a breaking change for use of software-based I2C and SPI.  Code that
constructed I2C/SPI peripherals in the following way will need to be
changed:

    machine.I2C(-1, ...)            ->  machine.SoftI2C(...)
    machine.I2C(scl=scl, sda=sda)   ->  machine.SoftI2C(scl=scl, sda=sda)

    machine.SPI(-1, ...)            ->  machine.SoftSPI(...)
    machine.SPI(sck=sck, mosi=mosi, miso=miso)
                        ->  machine.SoftSPI(sck=sck, mosi=mosi, miso=miso)

Code which uses machine.I2C and machine.SPI classes to access hardware
peripherals does not need to change.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
9e0533b9e1 extmod/machine_spi: Remove "id" arg in SoftSPI constructor.
The SoftSPI constructor is now used soley to create SoftSPI instances, it
can no longer delegate to create a hardware-based SPI instance.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
aaed33896b extmod/machine_i2c: Remove "id" arg in SoftI2C constructor.
The SoftI2C constructor is now used soley to create SoftI2C instances, it
can no longer delegate to create a hardware-based I2C instance.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George
c35deb2625 extmod/machine_i2c: Rename type to SoftI2C and add custom print method.
Also rename machine_i2c_type to mp_machine_soft_i2c_type.  These changes
make it clear that it's a soft-I2C implementation, and match SoftSPI.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Maureen Helm
997ec9e8cc zephyr: Update build instructions to v2.4.0.
Updates the zephyr port build instructions to use the latest zephyr
release tag.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-09-30 23:21:53 +10:00
Maureen Helm
f842e32155 zephyr: Const-ify struct device instance pointers.
Zephyr v2.4.0 added a const qualifier to usages of struct device to
allow storing device driver instances exclusively in flash and thereby
reduce ram footprint.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-09-30 23:21:53 +10:00
Maureen Helm
ce49be43b1 zephyr: Replace zephyr integer types with C99 types.
Zephyr v2.4.0 stopped using custom integer types in favor of C99 types
instead.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-09-30 23:21:53 +10:00
stijn
bada8c9231 windows: Update build instructions in README.
Make the instructions more complete by documenting all needed steps for
starting from scratch.  Also add a section for MSYS2 since the Travis build
uses it as well and it's a good alternative for Cygwin.  Remove the mingw32
reference since it's not readily available anymore in most Linux distros
nor compiles successfully.
2020-09-23 22:22:13 +10:00
Damien George
3e16763201 stm32/rfcore: Fix FUS layout and size of ipcc_device_info_table_t.
The device info table has a different layout when core 2 is in FUS mode.
In particular it's larger than the 32 bytes used when in WS mode and if the
correct amount of space is not allocated then the end of the table may be
overwritten with other data (eg with FUS version 0.5.3).  So update the
structure to fix this.

Also update rfcore.py to disable IRQs (which are enabled by rfcore.c), to
not depend on uctypes, and to not require the asm_thumb emitter.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-22 14:08:22 +10:00
Damien George
42342fa3cb tests/basics: Add test for MICROPY_PY_ALL_INPLACE_SPECIAL_METHODS ops.
And enable this feature on unix, the coverage variant.  The .exp test file
is needed so the test can run on CPython versions prior to "@=" operator
support.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 18:40:42 +10:00
Tweako
8af9796b16 stm32/led: Support PWM output without TIM3.
For example, the STM32WB55 doesn't have TIM3 but can still drive LEDs using
PWM on other timers.
2020-09-18 18:37:11 +10:00
Damien George
8f20cdc353 all: Rename absolute time-based functions to include "epoch".
For time-based functions that work with absolute time there is the need for
an Epoch, to set the zero-point at which the absolute time starts counting.
Such functions include time.time() and filesystem stat return values.  And
different ports may use a different Epoch.

To make it clearer what functions use the Epoch (whatever it may be), and
make the ports more consistent with their use of the Epoch, this commit
renames all Epoch related functions to include the word "epoch" in their
name (and remove references to "2000").

Along with this rename, the following things have changed:

- mp_hal_time_ns() is now specified to return the number of nanoseconds
  since the Epoch, rather than since 1970 (but since this is an internal
  function it doesn't change anything for the user).

- littlefs timestamps on the esp8266 have been fixed (they were previously
  off by 30 years in nanoseconds).

Otherwise, there is no functional change made by this commit.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 17:20:34 +10:00
Damien George
bd7af6151d ports: Add utime.gmtime() function.
To portably get the Epoch.  This is simply aliased to localtime() on ports
that are not timezone aware.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 16:25:36 +10:00
Damien George
b28758054b esp8266: Remove release-specific manifest, disable osdebug by default.
This commit removes release-specific builds for the esp8266 and makes the
normal build of the GENERIC board more like the release build.  This makes
esp8266 like all the other ports, for which there is no difference between
a daily build and a release build, making things less confusing.

Release builds were previously defined by UART_OS=-1 (disable OS messages)
and using manifest_release.py to include more frozen modules.

The changes in this commit are:
- Remove manifest_release.py.
- Add existing modules from manifest_release.py (except example code)
  to the GENERIC board's manifest.py file.
- Change UART_OS default to -1 to disable OS messages by default.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 16:01:42 +10:00
Mirko Vogt
ecb36d2439 esp32/modnetwork: Re-enable PPP support for IDF-SDK >=v4.
PPP support was disabled in 96008ff59a -
marked as "unsupported" due to an early IDF v4 release.  With the currently
supported IDF v4.x version - 4c81978a - it appears to be working just fine.
2020-09-18 15:57:21 +10:00
Jim Mussared
52d6eeb409 esp32/boards/sdkconfig.base: Set default IDF log level to ERROR.
This commit changes the default logging level on all esp32 boards to ERROR.
The esp32 port is now stable enough that it makes sense to remove the info
logs to make the output cleaner, and to match other ports.  More verbose
logging can always be reenabled via esp.osdebug().

This also fixes issue #6354, error messages from NimBLE: the problem is
that ble.active(True) will cause the IDF's NimBLE port to reset the
"NimBLE" tag back to the default level (which was INFO prior to this
commit).  Even if the user had previously called esp.osdebug(None), because
the IDF is setting the "NimBLE" tag back to the default (INFO), the
messages will continue to be shown.

The one quirk is that if the user does want to see the additional logging,
then they must call esp.osdebug(0, 3) after ble.active(True) to undo the
IDF setting the level back to the default (now ERROR).  This means that
it's impossible (via Python/esp.osdebug) to see stack-startup logging,
you'd have to recompile with the default level changed back to INFO.
2020-09-18 15:53:56 +10:00
Damien George
b31cb21a39 stm32/servo: Fix angle and speed methods to work again with -ve args.
Fixes a regression introduced by 70affd9ba2

Fixes issue #6403

Signed-off-by: Damien George <damien@micropython.org>
2020-09-12 13:47:59 +10:00
Damien George
acdb0608b7 py/parse: Pass in an mp_print_t to mp_parse_node_print.
So the output can be redirected if needed.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-11 23:00:03 +10:00
Jim Mussared
50efce8174 esp32/mpconfigport.h: Remove duplicate uhashlib registration. 2020-09-11 11:03:29 +10:00
stijn
70bec41089 windows: Show test failures in the Appveyor builds. 2020-09-11 10:56:02 +10:00
stijn
5b94c61097 windows/Makefile: Support freezing modules.
Alter the build flags as needed to support freezing modules with a
manifest.  This makes freezing works just like it does for e.g. the unix
port.
2020-09-11 10:52:52 +10:00
stijn
2a9ea69fa9 windows/msvc: Support freezing modules.
Support freezing modules via manifest.py for consistency with the other
ports.  In essence this comes down to calling makemanifest.py and adding
the resulting .c file to the build.  Note the file with preprocessed qstrs
has been renamed to match what makemanifest.py expects and which is also
the name all other ports use.
2020-09-11 10:52:35 +10:00
stijn
2e54d9d146 py: Fix handling of NaN in certain pow implementations.
Adds a new compile-time option MICROPY_PY_MATH_POW_FIX_NAN for use with
toolchains that don't handle pow-of-NaN correctly.
2020-09-11 10:04:57 +10:00
Damien George
709398daae stm32/rtc.h: Include py/obj.h to make header self contained.
Signed-off-by: Damien George <damien@micropython.org>
2020-09-10 20:46:40 +10:00
Damien George
547688c58c stm32/usb: Don't nul pyb_hid_report_desc if MICROPY_HW_USB_HID disabled.
So this code can be used if pyb_hid_report_desc is not included in the
port's root pointer list.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-10 20:46:35 +10:00
Damien George
27e117307d nrf: Remove unnecessary includes of mpconfigport.h and its header guard.
The mpconfigport.h file is an internal header and should only ever be
included once by mpconfig.h.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-09 00:13:34 +10:00
Damien George
75344af4ca nrf/main: Make mp_builtin_open signature match that in py/builtin.h.
Signed-off-by: Damien George <damien@micropython.org>
2020-09-09 00:13:34 +10:00
Albort Xue
5f50568b1f mimxrt/boards: Add MIMXRT1064_EVK board. 2020-09-09 00:06:33 +10:00
Jim Mussared
632e3b7acc stm32/boards/NUCLEO_WB55: Add Python helper code for rfcore.
This allows prototyping rfcore.c improvements from Python.

This was mostly written by @dpgeorge with small modifications to work after
rfcore_init() by @jimmo.
2020-09-08 23:54:02 +10:00
Jim Mussared
e2390d5a2f stm32/rfcore: Enable RX IRQ on BLE IPCC channel for better performance.
Before this change there was up to a 128ms delay on incoming payloads from
CPU2 as it was polled by SysTick.  Now the RX IRQ immediately schedules the
PendSV.
2020-09-08 23:53:12 +10:00
Jim Mussared
8b4ebd7166 stm32/rfcore: Refactor some helper funcs, and remove some magic numbers.
Also explain what the payload fixup code is doing.
2020-09-08 23:53:12 +10:00
Jim Mussared
01f2d77614 stm32/rfcore: Fix length matching in HCI parser. 2020-09-08 23:53:12 +10:00
Jim Mussared
0f28020a68 stm32/powerctrlboot: Acquire HSEM5 on STM32WB during SystemClock_Config.
This is required to allow using WS firmware newer than 1.1.1 concurrently
with USB (e.g. USB VCP).  It prevents CPU2 from modifying the CLK48 config
on boot.

Tested on WS=1.8 FUS=1.1.

See AN5289 and https://github.com/micropython/micropython/issues/6316
2020-09-08 23:53:12 +10:00
Jim Mussared
9c9cc7a02f stm32/boards/USBDONGLE_WB55: Add USE_MBOOT support. 2020-09-08 23:53:12 +10:00
Jim Mussared
30e8162ac4 stm32/rfcore: Update rfcore.c to match how ST examples work.
- Split tables and buffers into SRAM2A/2B.
- Use structs rather than word offsets to access tables.
- Use FLASH_IPCCDBA register value rather than option bytes directly.
2020-09-08 23:53:02 +10:00
Jim Mussared
b27edb8073 stm32/make-stmconst.py: Add support for WB55 header files. 2020-09-08 23:23:23 +10:00
Jim Mussared
126f972c34 extmod/nimble: Add timeout for HCI sync on startup.
This allows `ble.active(1)` to fail correctly if the HCI controller is
unavailable.

It also avoids an infine loop in the NimBLE event handler where NimBLE
doesn't correctly detect that the HCI controller is unavailable and keeps
trying to reset.

Furthermore, it fixes an issue where GATT service registrations were left
allocated, which led to a bad realloc if the stack was activated multiple
times.
2020-09-08 12:53:24 +10:00
Jim Mussared
311b8519af esp32: Pin MicroPython and NimBLE tasks to core 0.
MicroPython and NimBLE must be on the same core, for synchronisation of the
BLE ringbuf and the MicroPython scheduler.  However, in the current IDF
versions (3.3 and 4.0) there are issues (see e.g. #5489) with running
NimBLE on core 1.

This change - pinning both tasks to core 0 - makes it possible to reliably
run the BLE multitests on esp32 boards.
2020-09-08 12:53:24 +10:00
Jim Mussared
99a29ec705 extmod/btstack: Detect HCI UART init failure. 2020-09-08 12:53:24 +10:00
Andrew Leech
6077c63a45 stm32/mpbthciport: Increase char timeout of BT HCI UART.
The 2ms used previously was not long enough and it could lose HCI sync.

Also print error on tx failure to make this more obvious in the future.
2020-09-08 12:53:24 +10:00
Jim Mussared
c4af714d58 extmod/modbluetooth: Implement configuration of address modes.
Changes `BLE.config('mac')` to return a tuple (addr_mode, addr).

Adds `BLE.config(addr_mode=...)` to set the addressing mode.
2020-09-08 12:53:24 +10:00
Jim Mussared
1b1b22905e unix: Implement BLE H4 HCI UART for btstack/nimble.
This commit adds support for using Bluetooth on the unix port via a H4
serial interface (distinct from a USB dongle), with both BTstack and NimBLE
Bluetooth stacks.

Note that MICROPY_PY_BLUETOOTH is now disabled for the coverage variant.
Prior to this commit Bluetooth was anyway not being built on Travis because
libusb was not detected.  But now that bluetooth works in H4 mode it will
be built, and will lead to a large decrease in coverage because Bluetooth
tests cannot be run on Travis.
2020-09-08 12:53:24 +10:00
Jim Mussared
feed69aa5c unix/Makefile: Always enable -f*-sections regardless of DEBUG setting. 2020-09-08 12:53:16 +10:00
Jim Mussared
f3f31ac959 extmod/nimble: Make nimble_malloc work with allocated size. 2020-09-08 11:41:31 +10:00
Jim Mussared
ed14435a8e extmod/modbluetooth: Refactor stack/hci/driver/port bindings.
Previously the interaction between the different layers of the Bluetooth
stack was different on each port and each stack.  This commit defines
common interfaces between them and implements them for cyw43, btstack,
nimble, stm32, unix.
2020-09-08 11:41:31 +10:00
Jim Mussared
5ff265a3db stm32/modbluetooth_hci: Use a static mp_irq_obj_t for BT HCI UART IRQ.
So that the IRQ handler does not need to be traced by the GC.
2020-09-08 10:47:27 +10:00
Jim Mussared
23109988c2 stm32/uart: Allow static IRQ handler registration.
This will allow the HCI UART to use a non-heap mp_irq_obj_t, which avoids
needing to make a root pointer for it.
2020-09-08 10:46:30 +10:00
Damien George
3ff7079277 lib/utils/mpirq: Add mp_irq_init func, and clean up unused init method.
mp_irq_init() is useful when the IRQ object is allocated by the caller.

The mp_irq_methods_t.init method is not used anywhere so has been removed.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-04 12:40:38 +10:00
Damien George
5e69926ea0 stm32/mpconfigport.h: Enable MICROPY_PY_REVERSE_SPECIAL_METHODS.
It's a useful core feature.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-04 10:45:39 +10:00
Damien George
a909c21587 unix/fatfs_port: Fix month offset in timestamp calculation.
Signed-off-by: Damien George <damien@micropython.org>
2020-09-02 00:19:06 +10:00
Damien George
2a72e90ab8 extmod/vfs: Add option to use 1970 as Epoch.
By setting MICROPY_EPOCH_IS_1970 a port can opt to use 1970/1/1 as the
Epoch for timestamps returned by stat().  And this setting is enabled on
the unix and windows ports because that's what they use.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-01 12:36:28 +10:00
Damien George
0385b21597 unix/modos: Support larger integer range in uos.stat fields.
On 32-bit builds these stat fields will overflow a small-int, so use
mp_obj_new_int_from_uint to construct the int object.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-01 12:36:28 +10:00
Damien George
40153b800a esp32/mphalport: Fix mp_hal_time_ns offset.
gettimeofday returns seconds since 2000/1/1 so needs to be adjusted to
seconds since 1970/1/1 to give the correct return value of mp_hal_time_ns.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-31 00:49:58 +10:00
Damien George
836bca9956 unix/variants: Fix fast and freedos variants so they build again.
This regressed in bd2fff6687

Signed-off-by: Damien George <damien@micropython.org>
2020-08-30 13:48:26 +10:00
Damien George
06659077a8 all: Update Python code to conform to latest black formatting.
Updating to Black v20.8b1 there are two changes that affect the code in
this repository:

- If there is a trailing comma in a list (eg [], () or function call) then
  that list is now written out with one line per element.  So remove such
  trailing commas where the list should stay on one line.

- Spaces at the start of """ doc strings are removed.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-29 15:18:01 +10:00
Damien George
40d174ac7d stm32/powerctrl.h: Include stdbool.h to get definition of bool.
Signed-off-by: Damien George <damien@micropython.org>
2020-08-29 14:00:24 +10:00
Damien George
a93a378e93 zephyr/README: Update required Zephyr version and mention new features.
Signed-off-by: Damien George <damien@micropython.org>
2020-08-28 16:42:32 +10:00
Roberto Colistete Jr
91c5d168c0 nrf/Makefile: Improve user C modules support.
Add CFLAGS_EXTRA to CFLAGS. Include LDFLAGS_MOD to the compilation.
And, add SRC_MOD to SRC_QSTR.
2020-08-26 22:14:40 +02:00
Damien George
ee50a6effe py/mphal.h: Introduce mp_hal_time_ns and implement on various ports.
This should return a 64-bit value being the number of nanoseconds since
1970/1/1.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-22 16:13:44 +10:00
Damien George
92899354d9 unix/fatfs_port: Implement get_fattime.
Signed-off-by: Damien George <damien@micropython.org>
2020-08-22 14:45:57 +10:00
Dave Hylands
8727c4e2ec stm32/pin_defs_stm32: Fix pin printing to show IN mode correctly.
Prior to this commit, if you configure a pin as an output type (I2C in this
example) and then later configure it back as an input, then it will report
the type incorrectly.  Example:

    >>> import machine
    >>> b6 = machine.Pin('B6')
    >>> b6
    Pin(Pin.cpu.B6, mode=Pin.IN)
    >>> machine.I2C(1)
    I2C(1, scl=B6, sda=B7, freq=420000)
    >>> b6
    Pin(Pin.cpu.B6, mode=Pin.ALT_OPEN_DRAIN, pull=Pin.PULL_UP, af=Pin.AF4_I2C1)
    >>> b6.init(machine.Pin.IN)
    >>> b6
    Pin(Pin.cpu.B6, mode=Pin.ALT_OPEN_DRAIN, af=Pin.AF4_I2C1)

With this commit the last print now works:

    >>> b6
    Pin(Pin.cpu.B6, mode=Pin.IN)
2020-08-21 13:42:47 +10:00
Maureen Helm
ac94e06f0b zephyr: Include storage/flash_map.h unconditionally.
Include storage/flash_map.h unconditionally so we always have access to the
FLASH_AREA_LABEL_EXISTS macro, even if CONFIG_FLASH_MAP is not defined.

This fixes a build error for the qemu_x86 board:

main.c:108:63: error: missing binary operator before token "("
  108 |     #elif defined(CONFIG_FLASH_MAP) && FLASH_AREA_LABEL_EXISTS(storage)
      |                                                               ^
../../py/mkrules.mk:88: recipe for target 'build/genhdr/qstr.i.last' failed

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-08-21 11:23:43 +10:00
Damien George
fd2ff867a0 stm32/usbdev: Fix calculation of SCSI LUN size with multiple LUNs.
The SCSI driver calls GetCapacity to get the block size and number of
blocks of the underlying block-device/LUN.  It caches these values and uses
them later on to verify that reads/writes are within the bounds of the LUN.
But, prior to this commit, there was only one set of cached values for all
LUNs, so the bounds checking for a LUN could use incorrect values, values
from one of the other LUNs that most recently updated the cached values.
This would lead to failed SCSI requests.

This commit fixes this issue by having separate cached values for each LUN.

Signed-off-by: Damien George <damien@micropython.org>
2020-07-25 01:12:07 +10:00
Glenn Ruben Bakke
caaaa2b1f4 nrf: Enable more features for all targets.
Enabling the following features for all targets, except for nrf51
targets compiled to be used with SoftDevice:

- MICROPY_PY_ARRAY_SLICE_ASSIGN
- MICROPY_PY_SYS_STDFILES
- MICROPY_PY_UBINASCII
2020-07-22 12:54:20 +02:00
Glenn Ruben Bakke
0a79e18398 nrf: Split mpconfigport.h into multiple files.
Splitting mpconfigport.h into multiple device specific
files in order to facilitate variations between devices.

Due to the fact that the devices might have variations in
features and also variations in flash size it makes sense
that some devices offers more functionality than others
without being limited by restricted devices.

For example more micropython features can be activated for
nrf52840 with 1MB flash, compared to nrf51 with 256KB.
2020-07-22 12:54:20 +02:00
Zoltán Vörös
27767aafa2 lib/libm_dbl: Add round.c source code.
This code is imported from musl, to match existing code in libm_dbl.

The file is also added to the build in stm32/Makefile.  It's not needed by
the core code but, similar to c5cc64175b,
allows round() to be used by user C modules or board extensions.
2020-07-21 11:07:19 +10:00
Kenneth Ryerson
76fefad18b esp32/network_lan: Add support for IP101 PHY.
Signed-off-by: Kenneth Ryerson <kenneth.ryerson@gmail.com>
2020-07-21 00:59:47 +10:00
Jonathan Hogg
7dbef5377c esp32/esp32_rmt: Properly fix looping behaviour of RMT.
A previous commit 3a9d948032 can cause
lock-ups of the RMT driver, so this commit reverses that, adds a loop_en
flag, and explicitly controls the TX interrupt in write_pulses().  This
provides correct looping, non-blocking writes and sensible behaviour for
wait_done().

See also #6167.
2020-07-21 00:57:14 +10:00
Thorsten von Eicken
5264478007 extmod/modussl_mbedtls: Integrate shorter error strings.
The stm32 and esp32 ports now use shorter error strings for mbedtls errors.
Also, MBEDTLS_ERROR_C is enabled on stm32 by default to get these strings.
2020-07-21 00:31:05 +10:00
Jim Mussared
5d0be97bd9 unix: Make the MICROPY_xxx_ATOMIC_SECTION mutex recursive.
This mutex is used to make the unix port behave more like bare metal, i.e.
it allows "IRQ handlers" to run exclusively by making the mutex recursive.
2020-07-18 14:22:06 +10:00
Matt Trentini
486cb6dd4a nrf: Add board definition for nRF52840-MDK-USB-Dongle. 2020-07-16 23:47:13 +10:00
Glenn Ruben Bakke
95d0d1c486 nrf/boards: Enable RTCounter machine module for nrf9160 boards.
Resolves dependencies for MICROPY_PY_TIME_TICKS which
requires to link against nrfx_rtc.c functions by setting
MICROPY_PY_MACHINE_RTCOUNTER to 1.
2020-07-16 11:48:52 +02:00
Glenn Ruben Bakke
b776fe6969 nrf/nrfx_config: Disable RTC2 for nRF9160 targets.
nRF9160 does not have any RTC2. Disable the configuration in
case of NRF9160_XXAA.
2020-07-16 11:44:44 +02:00
Alex Tsamakos
f743bd3d25
nrf/boards: Add initial support for Actinius Icarus.
Example make command:

make BOARD=actinius_icarus
2020-07-10 03:48:30 +02:00
iabdalkader
c299cc94e3 stm32/pyb_can: Handle timeout arg for FDCAN in pyb_can_send.
Following the documented pyb can_send behavior in pyb.CAN docs.
2020-07-09 00:38:56 +10:00
iabdalkader
d07073f4e2 stm32/fdcan: Support maximum timeout of HAL_MAX_DELAY in can_receive. 2020-07-09 00:38:40 +10:00
iabdalkader
63b2eb27d4 stm32/fdcan: Use FDCAN_RXFxS_FxFL instead of hard-coded value. 2020-07-09 00:38:33 +10:00
iabdalkader
8594389fe7 stm32/fdcan: Use the right FIFO to calc element address in can_receive. 2020-07-09 00:37:50 +10:00
Damien George
f5dd46b479 unix/variants: Enable VFS and all supported filesystems on dev variant.
So that micropython-dev can be used to test VFS code, and inspect and build
filesystem images that are compatible with bare-metal systems.

Signed-off-by: Damien George <damien@micropython.org>
2020-07-08 23:57:25 +10:00
Martin Fischer
59ed3bdd9f nrf: Enable nrf tick support on all boards by default.
Having time.ticks_ms/us/add/diff is very useful and used by many drivers,
libraries and components.
2020-07-08 23:47:08 +10:00
Martin Fischer
15574cd665 nrf: Add support for time.ticks_xxx functions using RTC1.
This commit adds time.ticks_ms/us support using RTC1 as the timebase.  It
also adds the time.ticks_add/diff helper functions.  This feature can be
enabled using MICROPY_PY_TIME_TICKS.  If disabled the system uses the
legacy sleep methods and does not have any ticks functions.

In addition support for MICROPY_EVENT_POLL_HOOK was added to the
time.sleep_ms(x) function, making this function more power efficient and
allows support for select.poll/asyncio.  To support this, the RTC's CCR0
was used to schedule a ~1msec event to wakeup the CPU.

Some important notes about the RTC timebase:

- Since the granularity of RTC1's ticks are approx 30usec, time.ticks_us is
not perfect, does not have 1us resolution, but is otherwise quite usable.
For tighter measurments the ticker's 1MHz counter should be used.

- time.ticks_ms(x) should *not* be called in an IRQ with higher prio than
the RTC overflow irq (3).  If so it introduces a race condition and
possibly leads to wrong tick calculations.

See #6171 and #6202.
2020-07-08 23:47:02 +10:00
Glenn Ruben Bakke
c2317a3a8d nrf/Makefile: Disable ROM text compression when compiling for debug.
When compiling for debug (-O0) the .text segment cannot fit the flash
region when MICROPY_ROM_TEXT_COMPRESSION=1, because the compiler does not
optimise away the large if-else chain used to select the correct compressed
string.

This commit enforces MICROPY_ROM_TEXT_COMPRESSION=0 when compiling for
debug (DEBUG=1).
2020-07-01 22:54:52 +10:00
Glenn Ruben Bakke
f22f7b285e nrf/bluetooth/ble_uart: Swap end character on cooked strings.
Changing line ending character of cooked strings makes rshell/pyboard.py
work correctly over Bluetooth socat/pts devices.
2020-07-01 22:51:30 +10:00
Glenn Ruben Bakke
5996bf72f1 nrf/bluetooth/ble_uart: Fix random advertisement name.
The storage space of the advertisement name is not declared static, leading
to a random advertisement name.  This commit fixes the issue by declaring
it static.
2020-07-01 22:50:56 +10:00
Glenn Ruben Bakke
ab0c14dba0 nrf/bluetooth/ble_uart: Add mp_hal_stdio_poll function.
This adds support for enabling MICROPY_PY_SYS_STDFILES when running UART
over Bluetooth (NUS).
2020-07-01 22:50:41 +10:00
Glenn Ruben Bakke
fc1f22a097 nrf/bluetooth: Handle data length update request.
The Bluetooth link gets disconnected when connecting from a PC after 30-40
seconds.  This commit adds handling of the data length update request.  The
data length parameter pointer is set to NULL in the reply,  letting the
SoftDevice automatically set values and use them in the data length update
procedure.
2020-07-01 22:49:04 +10:00
Glenn Ruben Bakke
9dfb4ae6aa nrf/bluetooth/ble_uart: Fix implicit declaration of function.
mp_keyboard_interrupt() triggers a compiler error because the function is
implicitly declared.  This commit adds "py/runtime.h" to the includes.

Fixes issue #5732.
2020-07-01 22:48:25 +10:00
Jim Mussared
4050281311 unix: Enable uasyncio on dev variant. 2020-07-01 22:44:41 +10:00
Jim Mussared
27abac95d8 unix: Make manifest selection match other ports.
Changes are:
- The default manifest.py is moved to the variants directory (it's in
  "boards" in other ports).
- The coverage variant now uses a custom manifest in its variant directory
  to add frzmpy/frzstr.
- The frzmpy/frzstr tests are moved to variants/coverage/.
2020-07-01 22:42:55 +10:00
Andrew Leech
494bcad8ab stm32/mboot: Disable polling mode by default and use IRQ mode instead.
Polling mode will cause failures with the mass-erase command due to USB
timeouts, because the USB IRQs are not being serviced.  Swiching from
polling to IRQ mode fixes this because the USB IRQs can be serviced between
page erases.

Note that when the flash is being programmed or erased the MCU is halted
and cannot respond to USB IRQs, because mboot runs from flash, as opposed
to the built-in bootloader which is in system ROM.  But the maximum delay
in responding to an IRQ is the time taken to erase a single page, about
100ms for large pages, and that is short enough that the USB does not
timeout on the host side.

Recent tests have shown that in the current mboot code IRQ mode is pretty
much the same speed as polling mode (within timing error), code size is
slightly reduced in IRQ mode, and IRQ mode idles at about half of the power
consumption as polling mode.
2020-07-01 16:54:03 +10:00
Andrew Leech
95ec0debec stm32/mboot: Remove the use of timeout in DFU_GETSTATUS.
This is treated more like a "delay before continuing" in the spec and
official tools and does not appear to be really needed.  In particular,
downloading firmware is much slower with non-zero timeouts because the host
must pause by the timeout between sending each DFU_GETSTATUS to poll for
download/erase complete.
2020-07-01 16:33:10 +10:00
Damien George
41b7734c46 zephyr/make-minimal: Disable FAT and LFS2 options to make it build.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-30 22:33:41 +10:00
Damien George
f84145bea1 zephyr: Implement machine.Pin.irq() for setting callbacks on pin change.
Supports hard and soft interrupts.  In the current implementation, soft
interrupt callbacks will only be called when the VM is executing, ie they
will not be called during a blocking kernel call like k_msleep.  And the
behaviour of hard interrupt callbacks will depend on the underlying device,
as well as the amount of ISR stack space.

Soft and hard interrupts tested on frdm_k64f and nucleo_f767zi boards.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-30 22:33:41 +10:00
Damien George
65a7e00078 stm32/mboot: Add DFU logic to respond to DFU_GETSTATE request.
This is required for some DFU programmers, eg ST's DfuSe demo PC app.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-30 21:28:24 +10:00
Andrew Leech
40006813c3 stm32/flash: Update flash_get_sector_info to return -1 on invalid addr.
So the caller can tell when an invalid address is used and can take
appropriate action.
2020-06-30 21:24:28 +10:00
Andrew Leech
8bbaa20227 stm32/mboot: Implement DFU mass erase.
The implementation internally uses sector erase to wipe everything except
the sector(s) that mboot lives in (by erasing starting from
APPLICATION_ADDR).

The erase command can take some time (eg an STM32F765 with 2MB of flash
takes 8 to 10 seconds).  This time is normally enough to make pydfu.py fail
with a timeout.  The DFU standard includes a mechanism for the DFU device
to request a longer timeout as part of the get-status response just before
starting an operation.  This timeout functionality has been implemented
here.
2020-06-30 21:22:21 +10:00
Damien George
048a1d675d stm32/timer: Properly initialise timer deadtime/brk on WB MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-29 17:35:42 +10:00
Andrew Leech
e4fcd216e0 stm32/usbd_cdc_interface: Remove full==size-1 limitation on tx ringbuf.
Before this commit the USB VCP TX ring-buffer used the basic implementation
where it can only be filled to a maximum of buffer size-1.  For a 1024 size
buffer this means the largest packet that can be sent is 1023.  Once a
packet of this size is sent the next byte copied in goes to the final byte
in the buffer, so must be sent as a 1 byte packet before the read pointer
can be wrapped around to the beginning.  So in large streaming transfers,
watching the USB sniffer you basically get alternating 1023 byte packets
then 1 byte packets.

This commit changes the ring-buffer implementation to a scheme that doesn't
have the full-size limitation, and the USB VCP driver can now achieve a
constant stream of full-sized packets.  This scheme introduces a
restriction on the size of the buffer: it must be a power of 2, and the
maximum size is half of the size of the index (in this case the index is
16-bit, so the maximum size would be 32767 bytes rounded to 16384 for a
power-of-2).  But this is not a big limitation because the size of the
ring-buffer prior to this commit was restricted to powers of 2 because it
was using a mask-based method to wrap the indices.

For an explanation of the new scheme see
https://www.snellman.net/blog/archive/2016-12-13-ring-buffers/

The RX buffer could likely do with a similar change, though as it's not
read from in chunks like the TX buffer it doesn't present the same issue,
all that's lost is one byte capacity of the buffer.

USB VCP TX throughput is improved by this change, potentially doubling the
speed in certain cases.
2020-06-29 17:21:37 +10:00
Damien George
137df81757 stm32/i2cslave: Pass I2C instance to callbacks to support multi I2Cs.
By passing through the I2C instance to the application callbacks, the
application can implement multiple I2C slave devices on different
peripherals (eg I2C1 and I2C2).

This commit also adds a proper rw argument to i2c_slave_process_addr_match
for F7/H7/WB MCUs, and enables the i2c_slave_process_tx_end callback.
Mboot is also updated for these changes.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-26 23:56:45 +10:00
Damien George
0a8ce0d568 stm32/mboot: Update README to describe WB and littlefs support.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-26 21:26:06 +10:00
Damien George
67fd58bbd2 stm32/mboot: Add support for littlefs.
Mboot now supports FAT, LFS1 and LFS2 filesystems, to load firmware from.
The filesystem needed by the board must be explicitly enabled by the
configuration variables MBOOT_VFS_FAT, MBOOT_VFS_LFS1 and MBOOT_VFS_LFS2.
Boards that previously used FAT implicitly (with MBOOT_FSLOAD enabled) must
now add the following config to mpconfigboard.h:

    #define MBOOT_VFS_FAT (1)

Signed-off-by: Damien George <damien@micropython.org>
2020-06-26 21:17:02 +10:00
Damien George
390f32922d stm32/mboot: Decouple stream, filesystem and top-level loading code.
This commit factors the code for files and streaming to separate source
files (vfs_fat.c and gzstream.c respectively) and introduces an abstract
gzstream interface to make it easier to plug in different filesystems.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-26 21:15:30 +10:00
Damien George
763bd448a4 stm32/mboot: Don't search for firmware on FS, just attempt to open it.
There's no need to do a directory listing to search for the given firmware
filename, it just takes extra time and code size.  Instead this commit
changes it so that the requested firmware file is opened immediately and
will abort if the file couldn't be opened.  This also allows to specify
files in a directory.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-26 21:11:03 +10:00
Damien George
717b5073aa stm32/boards: Enable LFS2 on PYBD_SF3 and PYBD_SF6.
This was missed in commit 120368ba1a

Signed-off-by: Damien George <damien@micropython.org>
2020-06-25 16:32:48 +10:00
Damien George
c5af3217d9 stm32/timer: Support TIM1 on WB MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-25 16:32:48 +10:00
Damien George
eb9850ef6c stm32/mpconfigport.h: Enable PY_IO_FILEIO when any VFS is enabled.
Previously, if FAT was not enabled but LFS1/2 was then MICROPY_PY_IO_FILEIO
would be disabled and file binary-mode was not supported.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-25 16:32:48 +10:00
Damien George
b4dc4c5b9a stm32/mboot: Use additional CFLAGS to compile string0.c.
This is the same as a902b69dd5 but applied to
mboot's Makefile.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-23 14:00:16 +10:00
Damien George
81a7293ed6 stm32/mboot: Set VTOR on start up to ensure it has the correct value.
Commit 8675858465 switched to using the CMSIS
provided SystemInit function which sets VTOR to 0x00000000 (previously it
was 0x08000000).  A VTOR of 0x00000000 will be correct on some MCUs but not
on others where the built-in bootloader is remapped to this address, via
__HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH().

To make sure mboot has the correct vector table, this commit explicitly
sets VTOR to the correct value of 0x08000000.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-23 13:56:20 +10:00
Damien George
6f40e6e131 stm32/boards: Add build-time option for NUCLEO_WB55 to use mboot.
As an example of how to use mboot on a WB series MCU.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-22 14:18:15 +10:00
Damien George
705728369d stm32/mboot: Add support for using mboot with WB MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-22 14:18:15 +10:00
Damien George
8675858465 stm32/mboot: Use CMSIS system source code for SystemInit function.
There's no need to duplicate this functionality in mboot, the code provided
in stm32lib/CMSIS does the same thing and makes it easier to support other
MCU series.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-22 14:18:15 +10:00
Damien George
a8778c8dc8 stm32/mboot: Use flash routines from main stm32 code rather than custom.
The flash functions in ports/stm32/flash.c are almost identical to those in
ports/stm32/mboot/main.c, so remove the duplicated code in mboot and use
instead the main stm32 code.  This also allows supporting other MCU series.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-22 14:18:15 +10:00
Damien George
736daebfc8 stm32/flash: Add flash_is_valid_addr, and extend sectors for 2MB F7.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-22 14:18:15 +10:00
Damien George
4c8a68df6f stm32/i2cslave: Add support for WB MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-22 14:18:15 +10:00
Damien George
afd47d58ac stm32/flash: Make flash C-API reusable, and funcs return an error code.
This commit makes the low-level flash C functions usable by code other than
flashbdev.c (eg by mboot).  Changes in this commit are:
- flash_erase() and flash_write() now return an errno error code, a
  negative value on error.
- flash_erase() now automatically locks the flash, as well as unlocking it.
- flash_write() now automatically unlocks the flash, as well as locking it.
- flashbdev.c is modified for the above changes.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-22 14:18:15 +10:00
Damien George
ce326699d7 stm32/powerctrlboot: Include irq.h to get definitions of IRQ priorities.
irq.h is included by py/mphal.h but it's better to be explicit, eg if mboot
uses powerctrlboot.c.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-22 13:47:48 +10:00
Damien George
5f3c2f1fa8 stm32/irq: Clean up irq.h so it does not depend on core uPy defines.
The irq.h file now just provides low-level IRQ definitions and priorities.
All Python binding definitions are moved to modmachine.h, with some
renaming of pyb -> machine, and also the machine_idle definition (was
pyb_wfi) is moved to modmachine.c.

The cc3200 and teensy ports are updated to build with these changes.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-22 13:47:15 +10:00
Damien George
f1ba2c9d88 qemu-arm/Makefile: Add CFLAGS_EXTRA to CFLAGS.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-22 13:42:24 +10:00
Jonathan Hogg
3a9d948032 esp32/esp32_rmt: Call rmt_driver_install before rmt_config.
Otherwise the RMT will repeat pulses when using loop(True).  This repeating
is due to a bug in the IDF which will be fixed in an upcoming release, but
for now the accepted workaround is to swap these calls, which should still
work in the fixed version of the IDF.

Fixes issue #6167.
2020-06-19 22:11:14 +10:00
David Lechner
77ed6f69ac tools/uncrustify: Enable more opts to remove space between func and '('.
With only `sp_func_proto_paren = remove` set there are some cases where
uncrustify misses removing a space between the function name and the
opening '('.  This sets all of the related options to `force` as well.
2020-06-19 22:07:32 +10:00
Damien George
ce02d5e348 stm32/boards/NUCLEO_WB55: Add more CPU pins and aliases to SW1/2/3.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-18 10:48:24 +10:00
Glenn Ruben Bakke
8d71cc2e7d nrf/bluetooth: Use MP_ERROR_TEXT for all error messages.
This follows up on commit def76fe4d9.

Fixes issue #6152.
2020-06-17 11:33:22 +10:00
Damien George
4b5dd012e0 stm32/rfcore: Leave txpower level as default when initialising rfcore.
And provide a convenient API function to change it (currently unused).

Fixes issue #5985.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-17 00:10:29 +10:00
Damien George
289be6b352 stm32/usb: Add support for 2xVCP on L0, L432 and WB MCUs.
There are a maximum of 8 USB endpoints and each has 2 buffer slots
(in/out).  This commit add support for up to 8 endpoints and adds FIFO
configuration for USB profiles with 2xVCP on MCUs that have device-only USB
peripherals.

Tested on NUCLEO_WB55 in 2xVCP, 2xVCP+MSC and 2xVCP+MSC+HID mode.

Signed-off-by: Damien George <damien@micropython.org>
2020-06-17 00:09:42 +10:00
Damien George
da99e0f979 stm32/factoryreset: Provide empty create-FS function when FAT disabled.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-17 00:09:37 +10:00
Jon Rob
1678f41744 esp32/esp32_rmt: Extend RMT to support carrier feature.
The ESP32 RMT peripheral has hardware support for a carrier frequency, and
this commit exposes it to Python with the keyword arguments carrier_freq
and carrier_duty_percent in the constructor.  Example usage:

    r = esp32.RMT(0, pin=Pin(2), clock_div=80, carrier_freq=38000, carrier_duty_percent=50)
2020-06-17 00:03:33 +10:00
Damien George
2c5993c59e ports: Disable MICROPY_PY_ASSIGN_EXPR in bare-arm and minimal ports.
To keep these ports as minimal as possible.
2020-06-16 22:06:21 +10:00
Damien George
2b9900380a stm32/boards/STM32F769DISC: Use macro instead of const for flash size.
So that the flash size can be changed in just one place.  Also remove the
duplicate cache entry.
2020-06-12 10:28:26 +10:00
Maureen Helm
1ae861819d zephyr: Use cmake find_package to locate zephyr.
Updates the zephyr port to use the ZEPHYR_BASE environment variable only to
locate the zephyr cmake package, allowing cmake to cache the variable.
2020-06-12 10:25:16 +10:00
Maureen Helm
b1651ff092 zephyr: Increase minimum required cmake version to 3.13.1.
The minimum required cmake version has been 3.13.1 since zephyr 1.14.0.
2020-06-12 10:25:13 +10:00
Maureen Helm
4837b1caa2 zephyr: Convert DT_FLASH_AREA usages to new dts macros.
Converts DT_FLASH_AREA usages in the zephyr port to new device tree macros
introduced in zephyr 2.3.

Tested with littlefs on the reel_board.
2020-06-12 10:25:04 +10:00