Commit Graph

8 Commits

Author SHA1 Message Date
Damien George
c6f334272a stm32/mboot: Add support for signed and encrypted firmware updates.
This commit adds support to stm32's mboot for signe, encrypted and
compressed DFU updates.  It is based on inital work done by Andrew Leech.

The feature is enabled by setting MBOOT_ENABLE_PACKING to 1 in the board's
mpconfigboard.mk file, and by providing a header file in the board folder
(usually called mboot_keys.h) with a set of signing and encryption keys
(which can be generated by mboot_pack_dfu.py).  The signing and encryption
is provided by libhydrogen.  Compression is provided by uzlib.  Enabling
packing costs about 3k of flash.

The included mboot_pack_dfu.py script converts a .dfu file to a .pack.dfu
file which can be subsequently deployed to a board with mboot in packing
mode.  This .pack.dfu file is created as follows:
- the firmware from the original .dfu is split into chunks (so the
  decryption can fit in RAM)
- each chunk is compressed, encrypted, a header added, then signed
- a special final chunk is added with a signature of the entire firmware
- all chunks are concatenated to make the final .pack.dfu file

The .pack.dfu file can be deployed over USB or from the internal filesystem
on the device (if MBOOT_FSLOAD is enabled).

See #5267 and #5309 for additional discussion.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-18 12:43:01 +11:00
Damien George
0a8ce0d568 stm32/mboot: Update README to describe WB and littlefs support.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-26 21:26:06 +10:00
Martin Fischer
28833690bb stm32/mboot/README: Clarify that mboot can access FAT formatted FS only. 2020-04-16 16:28:07 +10:00
Damien George
0bb6b63e66 stm32/mboot/README: Fix some typos, describe bootloader and fwupdate.py. 2019-05-29 16:26:02 +10:00
Damien George
ff04b78ffd stm32/mboot: Add support for loading gzip'd firmware from a filesystem.
This adds support to mboot to load and program application firmware from
a .dfu.gz file on the board's filesystem.  See mboot/README.md for details.
2019-02-15 15:09:48 +11:00
Damien George
a1c81761b1 stm32/mboot: Add documentation for using mboot on PYBv1.x. 2018-12-04 23:48:47 +11:00
Damien George
ec7982ec6d stm32/mboot: Add support for erase/read/write of external SPI flash.
This patch adds support to mboot for programming external SPI flash.  It
allows SPI flash to be programmed via a USB DFU utility in the same way
that internal MCU flash is programmed.
2018-06-22 15:30:34 +10:00
Damien George
15ddc20436 stm32: Add new component, the mboot bootloader.
Mboot is a custom bootloader for STM32 MCUs.  It can provide a USB DFU
interface on either the FS or HS peripherals, as well as a custom I2C
bootloader interface.
2018-05-24 23:21:19 +10:00